Audio Technica AT-VM95 Cartridge Series - Moving Magnet 95C 95E 95SH 95SP ML EN

£35.00 Buy It Now, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: Top-Rated Seller hifi-madness ✉️ (18,826) 100%, Location: Birmingham, GB, Ships to: GB & many other countries, Item: 234567995424 Audio Technica AT-VM95 Cartridge Series - Moving Magnet 95C 95E 95SH 95SP ML EN. Audio Technica AT-VM95 Series Cartridge The new Audio-Technica At-95 cartridges will replace the legendary AT90 Series models AT-VM95C The AT-VM95C, the new Audio-Technica entry model Conical cartridge will replace the legendary AT90 Series models such as AT91, AT91R and CN5625AL Also the AT-VM95C is a “budget” cartridge featuring a conical stylus, the compatibility in the range will allow to upgrade with any of the 4 other LP styli of the Series such as Elliptical, Elliptical Nude, Microlinear and Shibata Therefore, with the VM95 series, it is not necessary to replace your complete cartridge when the diamond is worn, you simply replace the stylus, but you can also enjoy the experience of upgrading your cartridge with a different stylus. The six models of VM95 Series cartridges all use the same electromagnetic engine-body, so each of the six replacement styli are perfectly compatible The VM95 range of cartridges have two M2.6 threaded inserts allowing the easy installation of the cartridge onto a tonearm or removable headshell without the use of nuts. Each cartridge is supplied with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.. Features: Aluminium cantilever 4.0mV output voltage Compatible body with all VM95 Series stylus assemblies Replacement for AT91, AT91R and CN5625AL Specifications: Type: VM Stereo Dual Magnet Mounting: 1/2” centres Frequency Response: 20 - 20,000 Hz Channel Separation: 18 dB (1 kHz) Output Channel Balance: 2.5 dB (1 kHz) Output Voltage: 4.0 mV (@ 1 kHz, 5 cm/sec) Vertical Tracking Angle: 23° Vertical Tracking Force Range: 1.8 - 2.2g (standard 2.0 g) Stylus Shape: Conical Stylus Size: 0.6 mil Stylus Construction: Bonded Round Shank Cantilever: Aluminium Pipe Coil Impedance: 3.3 kO (1 kHz) Coil Inductance: 550 mH (1 kHz) DC Resistance: 485 O Static Compliance: 17 x 10 – 6 cm / dyne Dynamic Compliance: 6.5 x 10 – 6 cm / dyne (100 Hz) Wire Used for Coil: T.P. Copper Recommended Load Impedance: 47,000 O Recommended Load Capacitance: 100-200 pF Cartridge Weight: 6.1g Dimensions: 17.2 x 18.9 x 28.3 ( H x W x D mm) Replacement Stylus: AT-VMN95C AT-VM95E AT-VM95E, the new Audio-Technica entry model Elliptical cartridge, replaces the AT95E and takes advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts. Every cartridge diamond stylus will wear after a period of use. Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus and 800 hours for a Shibata stylus. VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. Therefore, it is not necessary to purchase a complete cartridge when your diamond is worn, you simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus. The six models of VM95 Series cartridges all use the same electromagnetic engine-body, so each of the six replacement styli are perfectly compatible. Features: Aluminium cantilever 4.0mV output voltage Compatible body with VM95 Series styli Replacement for AT95E and AT95EX 20 to 22,000Hz frequency response Specifications: Type: VM Stereo Dual Magnet Mounting: 1/2” centres Freq Response: 20 - 22k Hz Channel Separation: 20dB (1kHz) Channel Balance: 2.0dB (1kHz) Output: 4.0mV (@1kHz, 5cm/sec) Vert Track: 23°, 1.8-2.2g (2g) Stylus: Elliptical 0.3 x 0.7ml Construction: Bonded Round Shank Cantilever: Aluminium Pipe Coil: 3.3kO / 550mH (1kHz) DC Resistance: 485 O Static Compliance: 17x 10–6cm/dyne Compliance: 7 x 10–6cm/dyne (100Hz) Wire Used for Coil: T.P. Copper Load Impedance: 47kO, 100-200pF Dimensions (HWD): 172 x 189 x 283mm Cartridge Weight: 6.1g The AT-VM95EN from Audio Technica, features a Nude Elliptical Diamond stylus. The construction of this stylus is a one piece diamond with a round shank inserted in the cantilever to give you a light and rigid transmission system than a diamond tip bonded on a round titanium shank, like the AT-VM95E. Features: Aluminium cantilever 3.5mV output voltage Compatible body with all VM95 Series stylus assemblies 20 to 23,000Hz frequency response Specifications: Model: AT-VM95EN Type: VM Stereo Dual Magnet Mounting: 1/2” centres Frequency Response: 20 - 23,000 Hz Channel Separation: 22 dB (1 kHz) Output Channel Balance: 2.0 dB (1 kHz) Output Voltage: 3.5 mV (at 1 kHz, 5 cm/sec) Vertical Tracking Angle: 23° Vertical Tracking Force Range: 1.8 - 2.2g (standard 2.0 g) Stylus Shape: Elliptical Stylus Size: 0.3 x 0.7 mil Stylus Construction: Nude Round Shank Cantilever: Aluminium Pipe Coil Impedance: 3.3 kO (1 kHz) Coil Inductance: 550 mH (1 kHz) DC Resistance: 485 O Static Compliance: 20 x 10 – 6 cm / dyne Dynamic Compliance: 7 x 10 – 6 cm / dyne (100 Hz) Wire Used for Coil: T.P. Copper Recommended Load Impedance: 47,000 O Recommended Load Capacitance: 100-200 pF Cartridge Weight: 6.1g Dimensions: 17.2 x 18.9 x 28.3 ( H x W x D mm) Replacement Stylus: AT-VMN95EN Accessories Included: Two 11 mm installation screws / Two 8 mm installation screws / Two washers / Non-magnetic screwdriver AT-VM95ML Audio Technica AT-VM95ML, utilises a Nude Microlinear diamond, which gives a doubling the duration of your stylus. The performance of a line contact stylus, will minimize the “inner groove distortion” as well as providing extended frequency response and maximize resolution in the medium and high frequencies of the audio program material. It is a fact that every diamond stylus will wear after a period of use. It is estimated that you will get approximatly 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus and 800 hours for a Shibata stylus. The VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. You do not need to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, with the experience of upgrading your cartridge with a different stylus. The six models of VM95 Series cartridges all use the same electromagnetic engine-body, so each of the six replacement styli are perfectly compatible. Features: Aluminium cantilever 3.5mV output voltage Compatible with VM95 Series styli 20 to 25,000Hz frequency response Specification: Type: VM Stereo Dual Magnet Mounting: 1/2” centres Freq Response: 20 - 25k Hz Channel Separation: 23dB (1kHz) Channel Balance: 1.5dB (1kHz) Output: 3.5mV (@1kHz, 5cm/sec) Vert Track: 23°, 1.8-2.2g (2g) Stylus: Microlinear 0.3 x 0.7ml Construction: Nude Square Shank Cantilever: Aluminium Pipe Coil: 3.3kO / 550mH (1kHz) DC Resistance: 485 O Static Compliance: 20 x 10–6cm/dyne Compliance: 10 x 10–6cm/dyne (100Hz) Wire Used for Coil: T.P. Copper Load Impedance: 47kO, 100-200pF Dimensions (HWD): 172 x 189 x 283mm Cartridge Weight: 6.1g AT-VM95SH Audio Technica AT-VM95SH, uses a Nude Shibata stylus, which is considered one of the most acclaimed stylus format by high-end audiophiles. The Shibata styli produce mid and bass sounds strong and rich in addition to giving a frequency response up to 25000Hz. It is a fact that every diamond stylus will wear after a period of use. It is estimated that you will get approximatly 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus and 800 hours for a Shibata stylus. The VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. You do not need to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, with the experience of upgrading your cartridge with a different stylus. The six models of VM95 Series cartridges all use the same electromagnetic engine-body, so each of the six replacement styli are perfectly compatible. Features: Aluminium cantilever 3.5mV output voltage Compatible with VM95 Series styli 20 to 25,000Hz frequency response Specification: Type: VM Stereo Dual Magnet Mounting: 1/2” centres Freq Response: 20 - 25k Hz Channel Separation: 23dB (1kHz) Channel Balance: 1.5dB (1kHz) Output: 3.5mV (@1kHz, 5cm/sec) Vert Track: 23°, 1.8-2.2g (2g) Stylus: Microlinear 2.7 x 0.26ml Construction: Nude Square Shank Cantilever: Aluminium Pipe Coil: 3.3kO / 550mH (1kHz) DC Resistance: 485 O Static Compliance: 20 x 10–6cm/dyne Compliance: 10 x 10–6cm/dyne (100Hz) Wire Used for Coil: T.P. Copper Load Impedance: 47kO, 100-200pF Dimensions (HWD): 172 x 189 x 283mm Cartridge Weight: 6.1g AT-VM95SP The AT-VM95SP cartridge from Audio Technica features a Standard play (SP) stylus for mono SP records. When used with a dedicated archiving phono preamplifier equalizer with the functionality to generate a mono signal from Stereo inputs (Mono L+R/L/R, LR Variable Mix) allowing professional archivers to minimize any potential noise and distortion by sampling the least damage side of the grooves from an old record. Since Standard play records have monaural modulation, it is recommended to use the “MONO ON” function of your standard Stereo Phono Preamp to minimise any potential record surface noise. Every diamond stylus will become worn after a period of use. The lifespan for styli is approximately 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus and 800 hours for a Shibata stylus. The VM95 Series dual moving magnet cartridges can be used virtually forever by replacing the interchangeable stylus. It is not necessary to buy a completely new cartridge when your diamond is worn out, you can simply purchase the matching replacement stylus, and you can also enjoy the experience of upgrading your cartridge with a different stylus. The six models of VM95 Series cartridges all use the same electromagnetic engine-body, so each of the six replacement styli are completely compatible.   Features: 3ml SP stylus for low record surface noise Aluminium cantilever 2.7mV output voltage Compatible with VM95 Series styli Specifications: Type: VM Stereo Dual Magnet Mounting: 1/2” centres Freq Response: 20 - 23k Hz Channel Balance: 1.5dB (1kHz) Output: 2.7mV (@1kHz, 5cm/sec) Vert Track: 23°, 4.5-5.5g (5g) Stylus: SP 3ml Conical Bonded Construction: Bonded Round Shank Cantilever: Aluminium Pipe Coil: 3.3kO / 550mH (1kHz) DC Resistance: 485 O Static Compliance: 12 x 10–6cm/dyne Compliance: 2 x 10–6cm/dyne (100Hz) Wire Used for Coil: T.P. Copper Load Impedance: 47kO, 100-200pF Dimensions (HWD): 172 x 189 x 283mm Cartridge Weight: 6.1g We are an authorised Audio Technica dealership, so you can be assured of new and genuine products, covered by a full manufacturers warranty. Home About Us Delivery Returns Contact Us

Audio Technica AT-VM95 Series Cartridge £ 35 - 158.95 Same day shipping (Mon-Fri) if you order before 1pm Your browser does not support the video tag. Description Payment Delivery Returns Feedback Description AT-VM95C The AT-VM95C, the new Audio-Technica entry model Conical cartridge will replace the legendary AT90 Series models such as AT91, AT91R and CN5625AL Also the AT-VM95C is a “budget” cartridge featuring a conical stylus, the compatibility in the range will allow to upgrade with any of the 4 other LP styli of the Series such as Elliptical, Elliptical Nude, Microlinear and Shibata Therefore, with the VM95 series, it is not necessary to replace your complete cartridge when the diamond is worn, you simply replace the stylus, but you can also enjoy the experience of upgrading your cartridge with a different stylus. The six models of VM95 Series cartridges all use the same electromagnetic engine-body, so each of the six replacement styli are perfectly compatible The VM95 range of cartridges have two M2.6 threaded inserts allowing the easy installation of the cartridge onto a tonearm or removable headshell without the use of nuts. Each cartridge is supplied with one pair of 8mm M2.6 screws, one pair of 11mm M2.6 screws and two plastic washers.. Features :
  • Aluminium cantilever
  • 4.0mV output voltage
  • Compatible body with all VM95 Series stylus assemblies
  • Replacement for AT91, AT91R and CN5625AL
Specifications:
  • Type: VM Stereo Dual Magnet
  • Mounting: 1/2” centres
  • Frequency Response: 20 - 20,000 Hz
  • Channel Separation: 18 dB (1 kHz)
  • Output Channel Balance: 2.5 dB (1 kHz)
  • Output Voltage: 4.0 mV (@ 1 kHz, 5 cm/sec)
  • Vertical Tracking Angle: 23°
  • Vertical Tracking Force Range: 1.8 - 2.2g (standard 2.0 g)
  • Stylus Shape: Conical
  • Stylus Size: 0.6 mil
  • Stylus Construction: Bonded Round Shank
  • Cantilever: Aluminium Pipe
  • Coil Impedance: 3.3 kO (1 kHz)
  • Coil Inductance: 550 mH (1 kHz)
  • DC Resistance: 485 O
  • Static Compliance: 17 x 10 – 6 cm / dyne
  • Dynamic Compliance: 6.5 x 10 – 6 cm / dyne (100 Hz)
  • Wire Used for Coil: T.P. Copper
  • Recommended Load Impedance: 47,000 O
  • Recommended Load Capacitance: 100-200 pF
  • Cartridge Weight: 6.1g
  • Dimensions: 17.2 x 18.9 x 28.3 ( H x W x D mm)
  • Replacement Stylus: AT-VMN95C
AT-VM95E AT-VM95E, the new Audio-Technica entry model Elliptical cartridge, replaces the AT95E and takes advantage of the developments of the AT95EX introduced in 2015. The AT-VM95E features an improved and distinctive design resulting in a more rigid low resonance housing, and two threaded inserts in the cartridge body enabling it to be mounted to the headshell or on an integral tonearm with just two screws, no nuts. Every cartridge diamond stylus will wear after a period of use. Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus and 800 hours for a Shibata stylus. VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. Therefore, it is not necessary to purchase a complete cartridge when your diamond is worn, you simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus. The six models of VM95 Series cartridges all use the same electromagnetic engine-body, so each of the six replacement styli are perfectly compatible. Features:
  • Aluminium cantilever
  • 4.0mV output voltage
  • Compatible body with VM95 Series styli
  • Replacement for AT95E and AT95EX
  • 20 to 22,000Hz frequency response
Specifications:
  • Type: VM Stereo Dual Magnet
  • Mounting: 1/2” centres
  • Freq Response: 20 - 22k Hz
  • Channel Separation: 20dB (1kHz)
  • Channel Balance: 2.0dB (1kHz)
  • Output: 4.0mV (@1kHz, 5cm/sec)
  • Vert Track: 23°, 1.8-2.2g (2g)
  • Stylus: Elliptical 0.3 x 0.7ml
  • Construction: Bonded Round Shank
  • Cantilever: Aluminium Pipe
  • Coil: 3.3kO / 550mH (1kHz)
  • DC Resistance: 485 O
  • Static Compliance: 17x 10–6cm/dyne
  • Compliance: 7 x 10–6cm/dyne (100Hz)
  • Wire Used for Coil: T.P. Copper
  • Load Impedance: 47kO, 100-200pF
  • Dimensions (HWD): 172 x 189 x 283mm
  • Cartridge Weight: 6.1g
AT-VM95EN The AT-VM95EN from Audio Technica, features a Nude Elliptical Diamond stylus. The construction of this stylus is a one piece diamond with a round shank inserted in the cantilever to give you a light and rigid transmission system than a diamond tip bonded on a round titanium shank, like the AT-VM95E. Features:
  • Aluminium cantilever
  • 3.5mV output voltage
  • Compatible body with all VM95 Series stylus assemblies
  • 20 to 23,000Hz frequency response
Specifications:
  • Model: AT-VM95EN
  • Type: VM Stereo Dual Magnet
  • Mounting: 1/2” centres
  • Frequency Response: 20 - 23,000 Hz
  • Channel Separation: 22 dB (1 kHz)
  • Output Channel Balance: 2.0 dB (1 kHz)
  • Output Voltage: 3.5 mV (at 1 kHz, 5 cm/sec)
  • Vertical Tracking Angle: 23°
  • Vertical Tracking Force Range: 1.8 - 2.2g (standard 2.0 g)
  • Stylus Shape: Elliptical
  • Stylus Size: 0.3 x 0.7 mil
  • Stylus Construction: Nude Round Shank
  • Cantilever: Aluminium Pipe
  • Coil Impedance: 3.3 kO (1 kHz)
  • Coil Inductance: 550 mH (1 kHz)
  • DC Resistance: 485 O
  • Static Compliance: 20 x 10 – 6 cm / dyne
  • Dynamic Compliance: 7 x 10 – 6 cm / dyne (100 Hz)
  • Wire Used for Coil: T.P. Copper
  • Recommended Load Impedance: 47,000 O
  • Recommended Load Capacitance: 100-200 pF
  • Cartridge Weight: 6.1g
  • Dimensions: 17.2 x 18.9 x 28.3 ( H x W x D mm)
  • Replacement Stylus: AT-VMN95EN
  • Accessories Included: Two 11 mm installation screws / Two 8 mm installation screws / Two washers / Non-magnetic screwdriver
AT-VM95ML Audio Technica AT-VM95ML, utilises a Nude Microlinear diamond, which gives a doubling the duration of your stylus. The performance of a line contact stylus, will minimize the “inner groove distortion” as well as providing extended frequency response and maximize resolution in the medium and high frequencies of the audio program material. It is a fact that every diamond stylus will wear after a period of use. It is estimated that you will get approximatly 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus and 800 hours for a Shibata stylus. The VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. You do not need to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, with the experience of upgrading your cartridge with a different stylus. The six models of VM95 Series cartridges all use the same electromagnetic engine-body, so each of the six replacement styli are perfectly compatible. Features:
  • Aluminium cantilever
  • 3.5mV output voltage
  • Compatible with VM95 Series styli
  • 20 to 25,000Hz frequency response
Specification:
  • Type: VM Stereo Dual Magnet
  • Mounting: 1/2” centres
  • Freq Response: 20 - 25k Hz
  • Channel Separation: 23dB (1kHz)
  • Channel Balance: 1.5dB (1kHz)
  • Output: 3.5mV (@1kHz, 5cm/sec)
  • Vert Track: 23°, 1.8-2.2g (2g)
  • Stylus: Microlinear 0.3 x 0.7ml
  • Construction: Nude Square Shank
  • Cantilever: Aluminium Pipe
  • Coil: 3.3kO / 550mH (1kHz)
  • DC Resistance: 485 O
  • Static Compliance: 20 x 10–6cm/dyne
  • Compliance: 10 x 10–6cm/dyne (100Hz)
  • Wire Used for Coil: T.P. Copper
  • Load Impedance: 47kO, 100-200pF
  • Dimensions (HWD): 172 x 189 x 283mm
  • Cartridge Weight: 6.1g
AT-VM95SH Audio Technica AT-VM95SH, uses a Nude Shibata stylus, which is considered one of the most acclaimed stylus format by high-end audiophiles. The Shibata styli produce mid and bass sounds strong and rich in addition to giving a frequency response up to 25000Hz. It is a fact that every diamond stylus will wear after a period of use. It is estimated that you will get approximatly 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus and 800 hours for a Shibata stylus. The VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. You do not need to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, with the experience of upgrading your cartridge with a different stylus. The six models of VM95 Series cartridges all use the same electromagnetic engine-body, so each of the six replacement styli are perfectly compatible. Features:
  • Aluminium cantilever
  • 3.5mV output voltage
  • Compatible with VM95 Series styli
  • 20 to 25,000Hz frequency response
Specification:
  • Type: VM Stereo Dual Magnet
  • Mounting: 1/2” centres
  • Freq Response: 20 - 25k Hz
  • Channel Separation: 23dB (1kHz)
  • Channel Balance: 1.5dB (1kHz)
  • Output: 3.5mV (@1kHz, 5cm/sec)
  • Vert Track: 23°, 1.8-2.2g (2g)
  • Stylus: Microlinear 2.7 x 0.26ml
  • Construction: Nude Square Shank
  • Cantilever: Aluminium Pipe
  • Coil: 3.3kO / 550mH (1kHz)
  • DC Resistance: 485 O
  • Static Compliance: 20 x 10–6cm/dyne
  • Compliance: 10 x 10–6cm/dyne (100Hz)
  • Wire Used for Coil: T.P. Copper
  • Load Impedance: 47kO, 100-200pF
  • Dimensions (HWD): 172 x 189 x 283mm
  • Cartridge Weight: 6.1g
AT-VM95SP The AT-VM95SP cartridge from Audio Technica features a Standard play (SP) stylus for mono SP records. When used with a dedicated archiving phono preamplifier equalizer with the functionality to generate a mono signal from Stereo inputs (Mono L+R/L/R, LR Variable Mix) allowing professional archivers to minimize any potential noise and distortion by sampling the least damage side of the grooves from an old record. Since Standard play records have monaural modulation, it is recommended to use the “MONO ON” function of your standard Stereo Phono Preamp to minimise any potential record surface noise. Every diamond stylus will become worn after a period of use. The lifespan for styli is approximately 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus and 800 hours for a Shibata stylus. The VM95 Series dual moving magnet cartridges can be used virtually forever by replacing the interchangeable stylus. It is not necessary to buy a completely new cartridge when your diamond is worn out, you can simply purchase the matching replacement stylus, and you can also enjoy the experience of upgrading your cartridge with a different stylus. The six models of VM95 Series cartridges all use the same electromagnetic engine-body, so each of the six replacement styli are completely compatible.   Features:
  • 3ml SP stylus for low record surface noise
  • Aluminium cantilever
  • 2.7mV output voltage
  • Compatible with VM95 Series styli
Specifications :
  • Type: VM Stereo Dual Magnet
  • Mounting: 1/2” centres
  • Freq Response: 20 - 23k Hz
  • Channel Balance: 1.5dB (1kHz)
  • Output: 2.7mV (@1kHz, 5cm/sec)
  • Vert Track: 23°, 4.5-5.5g (5g)
  • Stylus: SP 3ml Conical Bonded
  • Construction: Bonded Round Shank
  • Cantilever: Aluminium Pipe
  • Coil: 3.3kO / 550mH (1kHz)
  • DC Resistance: 485 O
  • Static Compliance: 12 x 10–6cm/dyne
  • Compliance: 2 x 10–6cm/dyne (100Hz)
  • Wire Used for Coil: T.P. Copper
  • Load Impedance: 47kO, 100-200pF
  • Dimensions (HWD): 172 x 189 x 283mm
  • Cartridge Weight: 6.1g
We are an authorised Audio Technica dealership, so you can be assured of new and genuine products, covered by a full manufacturers warranty. Payment

We accept payment by any of the following methods:

PayPal, or credit Cards over the phone. If you accept an offer could you pay as soon as possible so we can ship your order as soon as possible.

Delivery

We ship all our orders from depot in the heart of Birmingham. We provide FREE next day delivery on all of our UK orders, so long as you complete your order before 2pm (Monday - Thursday, Excluding Bank holidays).  Orders placed on a Friday morning will be delivered on the Monday. Orders placed after 2pm Friday will be dispatched on the following Monday.

If you need an update on your order progress, please feel free to contact us directly.

  • For our UK orders we use DPD Couriers (Next Day Delivery) who provide a personal tracking numbers with a one-hour delivery slot on the day of delivery. For smaller UK orders we use Royal Mail (1st Class).
  • For our international orders we employ eBays Global Shipping Programme (GSP). Which is highly recommended for its costs and efficiency. All the international orders are sent to a GSP depot here in the UK, before onward international shipping. You will get emails updating you on the progress of your order throughout the delivery process

We do not allow local pick-up for eBay orders, but if this is necessary please contact us prior to making your purchase and we can make arrangements for you.

For combined shipping you will need to add the items to your basket before paying for them, and then we will send them out together. For international orders eBay GSP calculates the shipping cost, which normally charges extra for additional items based on weight.

Returns

We endeavour to ensure that 100% of our customers are completely satisfied and receive an excellent shopping experience; if for whatever reason you have any issues, please do not hesitate to contact us before opening any case(s).

  • We will always aim to do the best to resolve any issues
  • We will only pay the return delivery costs if the item was delivered wrong or it is faulty out of the box.
  • Any valid purchase made from us that carries a warranty, is ONLY valid in the UK. Therefore, if you have any problem that is covered by your warranty, you will have to return the item to us in the UK, at your cost.

For Returns:
  • The returns process must be started within 30 days of your initial order.
  • We ask all items that are returned to us be wrapped in outer material (brown paper, plastic, clear wrap, black wrap or anything similar) complete with their original packaging.
  • Any items that are damaged or have parts and accessories missing will be subject to a re-stocking fee or in some cases even rejected.
  • Please ensure you contact us before returning the item to obtain a returns reference.
  • You must also ensure you include your name, eBay ID, and the reason for the return; it will speed up the refund process.
  • All of the refunds are processed with the same payment method as the original purchase.
Feedback

We aim to provide a fantastic shopping experience for all our shoppers.  If you are pleased with the service you receive then please leave feedback accordingly, it really helps us as a small business.

We understand that mistakes can happen, and we are more than happy to resolve any issues that may arise. Therefore, if you have any problems please contact us before leaving any natural/negative feedback we will endeavour to resolve all issues to your satisfaction.

Ask a question Similar Items Follow us  

View Related Items View these items & similar

Audio Affair 23 Gibb Street Custard Factory Birmingham B9 4AA

Store Pages Customer Service

For help and advice

Contact us Newsleter Sign Up

Sign up for exclusive offers

Sign up eBay & Magento Design by
  • Condition: New
  • Model: Audio Technica AT-VM95C MM
  • Compatible Brand: Universal
  • Custom Bundle: No
  • Compatible Model: Universal
  • MPN: 04961310146030, 04961310145989, 04961310145996, 04961310146009, 04961310146016, 04961310146023
  • Colour: Multicoloured
  • Compatible Product Line: AT-95 Series
  • Brand: Audio-Technica
  • Type: Cartridge
  • Unit Type: Unit
  • Capacity: 1
  • Manufacturer Warranty: 1 Month
  • Features: Elliptical, Elliptical Nude, Microlinear, Shiba
  • Unit Quantity: 1 Cartridge
  • Country/Region of Manufacture: Japan

PicClick Insights - Audio Technica AT-VM95 Cartridge Series - Moving Magnet 95C 95E 95SH 95SP ML EN PicClick Exclusive

  •  Popularity - 152 watchers, 0.2 new watchers per day, 673 days for sale on eBay. Super high amount watching. 16 sold, 10 available.
  •  Best Price -
  •  Seller - 18,826+ items sold. 0% negative feedback. Top-Rated Plus! Top-Rated Seller, 30-day return policy, ships in 1 business day with tracking.

People Also Loved PicClick Exclusive