【EU】4 Axis USB Mach3 Controller Kit Nema 23 Stepper Motor Driver 270oz-in 76mm

£168.00 Buy It Now, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: kuku218 ✉️ (1,731) 100%, Location: Frankfurt, DE, Ships to: GB, EUROPEAN_UNION, Item: 194953704266 【EU】4 Axis USB Mach3 Controller Kit Nema 23 Stepper Motor Driver 270oz-in 76mm. 【EU】4 Axis USB Mach3 Controller Kit Nema 23 Stepper Motor Driver 270oz-in 76mm For CNC Router Milling Engraving Machine 【Ship from Germany Warehouse】

fast shipping time to the following EU Countries
A ustria,B elgium,B ulgaria,C zechRepublic,D enmark,E stonia,F inland,F rance,G ermany,G reece, H ungary,I reland,I taly,L atvia, L iechtenstein,L ithuania,L uxembourg,M onaco,N etherlands,P oland, P ortugal,R omania,S lovakia,S lovenia,S pain,S weden . U nited Kingdom.

We will ship this item from our Germany Warehouse by DHL to EU customers.

Estimated transportation time:

1-2 working days to: Germany 2-3 working days to: Austria,France,Spain and Italy 3-4 working days to: Other Europe Countries.

Paccel include:
  • 4× Nema23 stepper motor
  • 4× Tb6600 stepper motor driver
  • 1× 4 Axis Mach3 USB CNC control board
  • 1× USB Cable
  • 1× CD disc
  • 1× 350W 24V DC Switching power supply

                                        100% Brand New and High Quality!!!

Nema23 Stepper motor 76mm/270Oz-in/ 3A 1.8Nm

General Specification:

  • Step angle accuracy: ±5%(full step,not load)
  • Resistance accuracy: ±10%
  • Inductance accuracy: ±20%
  • Temperature rise: 80deg Max(rated current,2 phase on)
  • Ambient temperature ----------—20deg ~+50deg
  • Insulation resistance:100MΩ Min,500VDC
  • Insultion Strength--------500VAC for one minute

Wiring:

  • A+ : Red
  • A- : Green
  • B+ : Yellow
  • B- : Blue

TB6600 stepper motor driver 4.5A

Parameters:

  • The working voltage is DC 10V-45V. It is recommended to use switching power supply DC32V for power supply.
  • Adopt 6N137 high-speed optical lotus root to ensure high speed without losing step.
  • Using Toshiba's new high-current, high-voltage TB6600HG brand new original chip, with low-voltage shutdown, overheating shutdown and over-current protection circuits, and short-circuit protection added compared to TB6560.
  • The rated maximum output reaches: ±4.5A.
  • Suitable for 42, 57, 86 two-phase/four-phase/four-wire/six-wire stepper motors within 4.2A.
  • Automatic half-flow function.
  • Subdivision: full step, half step, 1/4 step, 1/8 step, 1/16 step, maximum 16 subdivisions.

Description:

  • The working voltage is DC 10-45V; it is recommended to use DV32V switching power supply.
  • There are two input terminals, both of which adopt the common anode input mode.
  • The level of the input pulse is 5V, if it is a 12V level pulse, a 1K resistor is required, if it is a 24V level pulse, a 2.4K resistor is required.
  • The motor runs when the CLK has pulses, and automatically enters the set half-current state when there is no pulse, and the motor is locked.
  • The motor rotates forward when CW is high or suspended, and reverses when it is low.
  • When EN is high or floating, it is working state, when it is low, it is offline.

Note:

  • The power supply cannot be connected reversely, otherwise the chip will be burnt out.
  • The set current should not exceed the rated current of the motor.

Mach3 USB motion control board 4 axis

Notice:

  • The motion control card for machine control, with strong professional.Requires the operator to have the relevant expertise!
  • Please strictly follow the instructions and warnings before using this product
  • If you are not familiar with the product and software features, make sure the machine's power switch on hand, you can quickly turn off the power.
  • It is recommended that the limit switch and emergency stop switch must be installed first and can be used normally.

Feature:

  • This USB motion card does not need install any USB driver, Windows2000/XP/Windows7,can directly identify.
  • 4-axis linkage, Maximum step-pulse frequency: 100KHz, support connect four stepper motor drives or servo drives.
  • Signal Output:0-10V, it can control the spindle motor speed through using mach3 software.
  • 4 general-purpose opto-couplers isolation input : can connect the limit switch, emergency stop.
  • 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps or other device.
  • Support for connecting electronic handwheel
  • (Note: the output singal of theelectronic handwheel must be 5V, more than 5V output will damage the hand wheel interface.)

350W 24V DC switching power supply

Specification:

  • DC output: 24V 0-14.5A
  • Inlet stability: ±0.5%
  • Load stability: ±0.5%
  • DC voltage of Adjustable range: ±10%
  • AC input voltage range: 115VAC/6.5A/50HZ----230VAC/3.4A/60HZ; Selected by switch
  • Overload protection: 105%-135% cut off the output, automatic recovery
  • Over-voltage Protection: 115%-150% shut down O/P voltage, re-power on to recover
  • Setup/rise/hold-up time: 200ms、50ms、20ms/230VAC at full load
  • Withstand voltage: I/P-O/P: 1.5KvAC; I/P-FG: 1.5KvAC; O/P-FG: 1.5KvAC; 1minute
  • Isolation resistance: I/P-O/P、 I/P-FG、O/P-FG: 500VDC/100MΩ
  • Working Temperature: -10℃~+50℃
Shipping Please open the package and check when you receive the parcels,if there are some damages before sign,if there are some damages , please do not sign and contact us immediately. We will ship your order within 1-2 working days after payment. Refund&Replace Any reason required for all refund.Item must be in it's original condition and no physical damage. Feedback Please contact us first when you have problems,and we will try our best to help you to solve it. Pls contact us before you want to leave any negative feedback,we will provide solutions,negative feedback can not solve any problems. Customers' service 1.We are happy to have your questions.If you have any question before or after purchase, please feel free to contact us. 2.If there is any problem about the items when you have them , please contact us firstly. We are here to solve them by the friendly and quick ways.
  • Condition: New
  • Country/Region of Manufacture: China
  • Step Angle(degrees): 1.8 degree
  • Application 2: Milling Machine, Engraver machine
  • Application 1: Semiconductor Equipmen
  • Shaft: Single Shaft
  • Motor Size: 57x57x76mm
  • Name: 4 Axis Nema23 Stepper motor usb CNC Controller Kit
  • Phase: 2 Phase
  • Driver: TB6600 Driver
  • Breakout Board: USB Mach3 Motion Control Board
  • Type: Hybrid
  • Lead wire: 4pcs
  • Model: 23HS2430B/TB6600
  • Driver Microstep: 16 microstep
  • Power supply: 350W 24V/10A
  • Current: 3A
  • Holding Torque: 180N.cm/18kg-cm 270 oz-in
  • Brand: RATTM MOTOR

PicClick Insights - 【EU】4 Axis USB Mach3 Controller Kit Nema 23 Stepper Motor Driver 270oz-in 76mm PicClick Exclusive

  •  Popularity - 6 watchers, 0.0 new watchers per day, 726 days for sale on eBay. Super high amount watching. 0 sold, 6 available.
  •  Best Price -
  •  Seller - 1,731+ items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive