GLASS POLISHING~CERIUM OXIDE~GLASS ~ 2.5μ POWDER SCRATCH WHITE

CERIUM OXIDE~GLASS ~ 2.5μ POWDER  -  FINE QUALITY REMOVES LIGHT SCRATCHES FROM WINDSCREENS, WINDOWS, HEADLIGHTS,PHONE SCREENS, CHECK LIST BELOW

CERIUM OXIDE IS  NOT SUITABLE FOR POLISHING OUT DEEP SCRATCHES ,  GLASS POLISHING IS A SKILLED JOB WHICH USUALLY REQUIRES PRACTICE AND HARD WORK,    THIS IS NOT A QUICK FIX METHOD FOR REMOVING SCRATCHES ON GLASS  .   IF YOU CAN FEEL THE SCRATCH WITH YOUR FINGER NAIL IT IS TOO DEEP TO SCRATCH OUT

IMPORTANT PLEASE READ:   THIS IS A DIY ITEM,   BUYERS   ARE RESPONSIBLE FOR THE RESULTS OBTAINED IF YOU ARE NOT SURE THAT THIS ITEM IS SUITABLE FOR THE JOB YOU ARE DOING,   PLEASE ASK ME AND I WILL TRY TO HELP AND WILL   GIVE AN HONEST OPINION OR YOU COULD DO YOUR OWN RESEARCH ON USING CERIUM OXIDE, THERE IS PLENTY OF INFORMATION ON THE NET, I WILL ALWAYS   RESOLVE   ANY   GENUINE CUSTOMER   PROBLEMS BUT PLEASE    DO NOT!!   BUY MY ITEMS IF YOU HAVE ANY INTENTIONS OF LEAVING OTHER THAN POSITIVE FEEDBACK.  

TO USE with Wool Bob:     MIX A SMALL AMOUNT OF POWDER WITH WATER TO CREAMY CONSISTENCY COAT THE FLAT

 END OF THE BOB WITH THE MIXTURE, USING A DRILL SPEED OF NO MORE THAN 2000 RPM THE MICRO ABRASIVE CAN

 BE USED   TO VERY SLOWLY POLISH AWAY A VERY THIN LAYER OF GLASS SURFACE   TO BRING BACK THE SHINE OR

 WITH FURTHER POLISHING   SLOWLY! REMOVE VERY FINE SCRATCHES, AS THE FELT DRIES ADD MORE WATER OR

 ABRASIVE MIXTURE AND   KEEP CHECKING   THE GLASS IS NOT GETTING TOO HOT, TO AVOID CRACKING.

Use to for polishing:

1) automobile and other glasses

2) glass headlights

3) mirror, double glaze units

4) display

5) hard plastic

6) insulating glass

7) aquariums, Terrariums

8) marble and granite, table tops, shower screens

9) lens

10) phone screens

10) silver, gold

11) metal surfaces, etc., non coated domestic glass

Method of preparation of polishing paste:

1) mix (1 part powder per 1 parts water) to produce sour cream paste.

2) mix until a uniform mass is obtained.