OO9/009 Corris Railway Wooden Slate Open Wagons x 3 Narrow Gauge HOe

£13.99 Buy It Now or Best Offer, £2.99 Shipping, eBay Money Back Guarantee
Seller: nigel_brooks ✉️ (3,882) 100%, Location: Colchester, GB, Ships to: WORLDWIDE, Item: 266638690581 OO9/009 Corris Railway Wooden Slate Open Wagons x 3 Narrow Gauge HOe. Set of 3 Corris Railway Wooden Slate Wagons with Loads, Narrow Gauge in high quality 3D Resin for 4mm scale / 9mm track - OO9 HOe

From Brooks 3D Models (.com)

Order 2 or more sets, and get 10% off making £12.69 per set (e.g. £25.18 for 6).

Please check all the photos, and read the text below to know what you are receiving.There are no instructions with the kit , so refer to notes below !

There is a quick video Corris Wooden Wagon Rotation

Set consists of Tie Rod (TR), 2-Plank (2P) and End Door (ED). With individual unique chassis lengths, wheel-bases, brakes and other details. All 6 brake levers are slightly different, a set of optional Clover Leaf axle-box overlays, and optional Quarry Plates on some (see below). Supplied with new slate loads,

The details and measurements of these 3 types are based on extensive research of multiple sources of both drawings and original photographs. Many thanks to the Corris Railway for their help and support.

Dimensions : height from rail top: 12.5-13.5mm (body), width: 15mm (ex brake lever), length (buffers): 28-29mm

Parts, supplied UNPAINTED : 3 x Wagon Bodies/Chassis with detailed axle boxes, brakes, and other fine details 3 x Coupling sets - fixed loop + 2-link close-couplings, normally fixed inside 3 x Pairs of Kato solid metal wheels/axles, normally pre-fitted to the chassis 3 x Slate Loads - hollow to allow adding weight if desired. 1 x End Door for ED wagon, might be attached in place – take care if removing 6 x Brake Levers (2 variants per wagon type, 1 spare) 18 x Cloverleaf Axle-box overlays (2 spare per wagon) 4 x Quarry Number Plates (TR has them moulded on)

If you want to change the mix of wagons, then please contact me, DO NOT use “Add Message to Seller”, sellers do not see those messages !!! (thanks eBay)

Photos show all the parts supplied, along with some painted versions - the painted ones are prototypes, and may have minor differences.

Cloverleaf Covers : A few of the prototype 2-plank and End Door wagons had the cloverleaf style axle-boxes, these are provided as overlays. The outside has a pip at the top, the inside has a small pip that locates into the hole at the top of the moulded axle-box. See photos.

Quarry Plates : Some vehicles attached to particular quarries displayed these plates on the brake-lever side, as show in photos.

End Door : This is normally supplied fitted, but can be carefully removed. Push outwards from the top. The bottom is held with 2 pegs in locating holes. It can be fitted, left off, or hanging open etc.

COUPLINGS : The wagons have an NEM socket, so you can fit your own types, but my OO9 hook and fixed loop couplings are supplied attached inside the wagon, just apply gentle sideways pressure to snap off. Also supplied are 1 set of double-link close-couplings for more realistic wagon spacing.

WHEELS : If removing/replacing wheel-sets, do this very carefully, using pliers to hold the axles, and only apply gentle pressure to the axle boxes. The 3D resin is not as flexible or forgiving as injection moulded plastic.

Due to tolerances/variations in the printing process, the couplings may be slightly loose, or rather tight. Loose will just require some glue or packing, if tight, ensure all the sprues/bumps are fully removed (a fingernail usually does the trick), you can also lubricate with an HB pencil (as the resin is naturally rough), but some might require gentle filing/sanding to ensure a good fit. Use super glue or PVA - solvent glues do not work on 3D resins.

The NEM style pockets and couplings are a little delicate, so take care, they will not stand up to repeated insertion and removal. Each wagon comes with spares, in case of breakage.

WEIGHTING : The metal wheel-sets give the wagons a reasonable amount of weight. You can of course add weight as the load, but better to add a small lead strip under the chassis, between the axles, to give a low centre of gravity.

CAREFUL : All 3D models can be a little delicate, so don't drop them on the floor ! Also, I recommend any work be done with a file/sandpaper or min-drill rather than trying to cut, as this is gentler. I cannot be held responsible for breakage during handling, but if they are damaged in the post, then please provide photographic evidence of packaging etc. Any breakage can normally be fixed with a spot of super-glue or PVA.

The parts are printed in high-resolution resin, I generally print in white, although this doesn’t photograph well, it paints very well (colour you receive may vary). All prints have been cleaned and cured thoroughly, but as with all 3D prints, there may be small blemishes to tidy up.

STOCK : I hold a small stock, and normally post on Monday, Wednesday and Friday. I will advise you when the order is received of any delay, otherwise I aim to dispatch with 2 working days.

Please check Brooks3Dmodels.com for up to date model lists, as eBay make it impossible to update all the listings here. Locos: OO9 Glyn Steam Tram Loco OO9 Bagnall Contractors Quarry Loco OO9 Hunslet 0-4-0 ex-Tunnelling Diesel OO9 Baguley Drewry RNAD Diesel OO9 Steam Tram 'Toby' B11-109SC Adapter Including Compatible Chassis for KATO 11-109 B11-109SA Adapter Excluding Compatible Chassis for KATO 11-109 Dummy-109 Chassis KATO 11-109 Chassis TU-KOPPEL 0-4-0 Chassis Rolling stock: 3 off Dinorwic / Penrhyn Quarry Rubble Rubbish Wagons 3 off Glyn Valley Tramway GVT Slate Wagons 3 off Snailbeach District Railways Large Hopper Wagons 3 off Corris Slate Slab Trestle Wagons 3 off Ffestiniog 2 Ton Flat Slab Wagons WLLR Closed Goods Van 3 off RAF Fauld Ammo Wagons Glyn Valley Tramway GVT Guard’s Van 3 off Ffestiniog 3 Ton Slate Wagons 3 off GVT 4 Ton Granite/Mineral Wagons 6 off Talyllyn 2 Bar Slate Wagons / 3 off Talyllyn 2 Bar Slate Wagons 6 off Penrhyn Wagons 6 off Tipper Wagons / 3 off Tipper Wagons Pair (2) Cattle Wagons/Vans 6 off Ffestiniog 2 Ton Slate Wagons / 3 off Ffestiniog 2T Slate Wagons 7mm Narrow Gauge / O-16.5 3 off 7mm Tipper Wagons 3 off 7mm Ffestiniog 2 Ton Braked Slate Wagons

Lastly, I am always interested in hearing back from people both the existing range, and suggestions for what to work on next. Also checkout my website: Brooks3DModels.com

Thank you Nigel

  • Condition: New
  • Brand: Brooks Models
  • Power Type: DC
  • Type: Slate Wagon
  • Corporate Livery: Corris Railway
  • Replica of: Corris Railway
  • Material: Resin
  • Scale: 1:76
  • Features: Not Painted
  • Gauge: OO9

PicClick Insights - OO9/009 Corris Railway Wooden Slate Open Wagons x 3 Narrow Gauge HOe PicClick Exclusive

  •  Popularity - 28 watchers, 0.5 new watchers per day, 61 days for sale on eBay. Super high amount watching. 14 sold, 4 available.
  •  Best Price -
  •  Seller - 3,882+ items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive