DCC Power Bus Wire Kits for Hornby Model Railway from Railwayscenics

Sold See similar items £8.99 Buy It Now, FREE Shipping, 14-Day Returns, eBay Money Back Guarantee
Seller: railwayscenics ✉️ (5,403) 99.8%, Location: Gillingham, Dorset, GB, Ships to: GB, EUROPEAN_UNION, Item: 272414501734 DCC Power Bus Wire Kits for Hornby Model Railway from Railwayscenics.

These non solder below baseboard DCC power bus wiring starter kits allows a proper electrical power bus to be created for all DCC model railway layouts. You are required to solder the dropper wires to the track, and the two components of the filter kits together. Instructions are included for connector use and filter kit fitting.

Can be used with with many DCC systems from most manufacturers including Hornby, Bachmann, Gaugemaster, NCE and Digitrax.

Items e, f, and g are not found in any other DCC power bus wiring kit on eBay. The terminal blocks are supplied to enable the fitting of the termination filter kits and to also allow easy connection to your controller wiring.

Other wire combinations can be exchanged in the kits. Just let us know your choice of wire colours by email. All wire sizes are available in black, blue, brown, green, grey, orange, pink, purple, red, white, and yellow.

Additional 32/0.2 wire, 24/0.2 wire, 16/0.2 wire, P clips, termination filters and connectors are all available from either us on eBay or from our online store railwayscenics.com.  

Select your wire kit size using the drop down box above.

Check out my other items !

Be sure to add me to your favourites list !

Specifications

Micro DCC bus wiring starter kit

This micro DCC power bus wiring starter kit has been put together for those modellers whose layout is less than 5m in length. We have included the light 24/0.2 wire as this would be suitable for all scales of models except 7mm scale short layouts. Kit includes a) 5m each of black and red 24/0.2 wire which is rated to 4.5A. This offers an ideal base for your DCC bus wiring. b) 2m each of black and red 16/0.2 multi core wire which is rated to 3.0amp. This is ideal for running connections from the bus wire to the track. c) 10 x red cable splices. These allow the dropper wires to be connected to the main power bus wire without needing to cut in to it and solder or otherwise make joints. These splices are simply fitted over the cable and the connection made by squeezing them with pliers. The joint is strong and fully insulated. d) 10 x 4.8mm plastic P clips to secure the wiring to the underside of the baseboard. e) 2 x DCC termination filter kits. These small and low cost items can be used to suppress voltage spikes and assist maintenance of good CC signal, and can also extend decoder life and improve overall reliability of your layout. Installation instructions supplied. f) 4 x small terminal blocks to allow easy connection of the termination kits to your bus wires g) 2 x large terminal blocks to allow connection of your DCC bus wires to your controller wires.

Small DCC bus wiring starter kit

This small DCC power bus starter wiring kit has been put together for those modellers whose layout is less than 5m in length. We have included the heavy 32/0.2 wire as this would be suitable for all scales of models especially 7mm scale short layouts. and those smaller layouts which make use of a power booster. Kit includes a) 5m each of black and red 32/0.2 wire which is rated to 6.0A. This offers an ideal base for your DCC bus wiring. b) 2m each of black and red 16/0.2 multi core wire which is rated to 3.0amp. This is ideal for running connections from the bus wire to the track. c) 10 x red cable splices. These allow the dropper wires to be connected to the main power bus wire without needing to cut in to it and solder or otherwise make joints. These splices are simply fitted over the cable and the connection made by squeezing them with pliers. The joint is strong and fully insulated. d) 10 x 4.8mm plastic P clips to secure the wiring to the underside of the baseboard. e) 2 x DCC termination filter kits. These small and low cost items can be used to suppress voltage spikes and assist maintenance of good CC signal, and can also extend decoder life and improve overall reliability of your layout. Installation instructions supplied. f) 4 x small terminal blocks to allow easy connection of the termination kits to your bus wires g) 2 x large terminal blocks to allow connection of your DCC bus wires to your controller wires.

Medium DCC bus wiring starter kit

This medium DCC power bus starter wiring kit allows a proper electrical power bus to be created for your DCC model railway layout which is up to 10m in length and is not fitted with any power boosters. This kit is also idea for creating power districts for your layout using different colour wires to make fault finding easier. Kit includes a) 10m each of black and red 24/0.2 wire which is rated to 4.5A. This offers an ideal base for your DCC bus wiring. b) 5m each of black and red 16/0.2 multi core wire which is rated to 3.0amp. This is ideal for running connections from the bus wire to the track. c) 26 x red cable splices. These allow the dropper wires to be connected to the main power bus wire without needing to cut in to it and solder or otherwise make joints. These splices are simply fitted over the cable and the connection made by squeezing them with pliers. The joint is strong and fully insulated. d) 20 x 4.8mm plastic P clips to secure the wiring to the underside of the baseboard. e) 2 x DCC termination filter kits. These small and low cost items can be used to suppress voltage spikes and assist maintenance of good CC signal, and can also extend decoder life and improve overall reliability of your layout. Installation instructions supplied. f) 4 x small terminal blocks to allow easy connection of the termination kits to your bus wires g) 2 x large terminal blocks to allow connection of your DCC bus wires to your controller wires.

Large DCC bus wiring starter kit

This large DCC power bus starter wiring kit was created for DCC model railway layouts which are up to 10m in length and are fitted with any power boosters. This kit is also idea for creating power districts for your layout using different colour wires to make fault finding easier. Kit includes a) 10m each of black and red 32/0.2 wire which is rated to 4.5A. This offers an ideal base for your DCC bus wiring. b) 5m each of black and red 16/0.2 multi core wire which is rated to 3.0amp. This is ideal for running connections from the bus wire to the track. c) 26 x red cable splices. These allow the dropper wires to be connected to the main power bus wire without needing to cut in to it and solder or otherwise make joints. These splices are simply fitted over the cable and the connection made by squeezing them with pliers. The joint is strong and fully insulated. d) 20 x 4.8mm plastic P clips to secure the wiring to the underside of the baseboard. e) 2 x DCC termination filter kits. These small and low cost items can be used to suppress voltage spikes and assist maintenance of good CC signal, and can also extend decoder life and improve overall reliability of your layout. Installation instructions supplied. f) 4 x small terminal blocks to allow easy connection of the termination kits to your bus wires g) 2 x large terminal blocks to allow connection of your DCC bus wires to your controller wires.

Heavy Duty DCC bus wiring starter kit

This kit can be used for all model railway layouts above 10m in length, and those layouts which make use of a power booster, or are not fitted with power districts. Kit includes a) 10m each of black and red 30/0.25mm wire which is rated to 21.0A. This offers an ideal base for your DCC bus wiring. b) 5m each of black and red 16/0.2 multi core wire which is rated to 5.0amp. This is ideal for running connections from the bus wire to the track. c) 26 x red cable splices. These allow the dropper wires to be connected to the main power bus wire without needing to cut in to it and solder or otherwise make joints. These splices are simply fitted over the cable and the connection made by squeezing them with pliers. The joint is strong and fully insulated. d) 20 x 4.8mm plastic P clips to secure the wiring to the underside of the baseboard. e) 2 x DCC termination filter kits. These small and low cost items can be used to suppress voltage spikes and assist maintenance of good CC signal, and can also extend decoder life and improve overall reliability of your layout. Installation instructions supplied. f) 4 x small terminal blocks to allow easy connection of the termination kits to your bus wires g) 2 x large terminal blocks to allow connection of your DCC bus wires to your controller wires.

About Us Railwayscenics are a UK based business, and have been specialising in selling a wide range of electrical and electronic products, mainly to railway modellers for the last four years. We know our products and will give help and advice where required both both pre and post sales. Our range of components is wide and varied, and is constantly expanding. Our stock currently consists of over 1800 product lines, with a total stock holding of over 30,000 items. All of our products are priced competitively, and we will quote if you think we are too expensive. Railwayscenics are committed to achieving a high level of customer satisfaction. Should you find any of our products or service are not to your satisfaction, please give me the opportunity to resolve the situation before considering leaving anything other than positive feedback. Payment PayPal PayPal is our preferred method of payment. You do not need a PayPal account to pay using this method. Cheques and Postal Orders You can also mail your payment to us if using cheque or postal orders (UK orders only) Goods are sent when payments arrive and when cheques are fully cleared in our bank which can take up to 7 days. Cheques payable to Stephen Lane. Postage Various UK delivery options are available on all products that we sell. Please choose your required method when checking out. We also now offer international delivery to most countries. All orders are dispatched from the UK and those received and paid for Monday-Friday before 1pm will usually be dispatched the same day. Items ordered over the Weekend or on a bank holiday will be dispatched on the following working day. We use Royal Mail to dispatch orders. All orders will be sent to the registered address at PayPal, so please ensure that this address is correct. Please note that deliveries to Northern Ireland, Scottish Highlands, and the Isles may take longer to arrive. We do combine postage if you buy more than one item. Use the eBay shopping basket to build your order. Postage should be automatically re-calculated for multiple purchases, but if you have any queries please do not hesitate to contact us before you checkout. Returns We want you to be completely happy with your purchase from Railwayscenics, however we do understand some items are not always suitable once you receive them or may develop a fault once received. In the unlikely event that you are unhappy with your purchase, please contact us to arrange a return within 14 days of receiving your item. All parts of the purchase must be returned in their original packaging, and must be in their original condition. Return delivery costs will not be refunded, unless the item is faulty. Contact Us As a customer focused business, if you have any pre or post sales questions, we are always happy to help. You can send us an eBay message by using the ‘Ask a question’ link found towards the bottom of this page. We will reply as soon as we can. Please give us as much information as possible to allow us to give help.   Feedback Railwayscenics are working hard to deliver 100% customer satisfaction, putting you, our customer first and take our eBay feedback very seriously Please leave your feedback when you have received your order, which lets us know that the item arrived safely. We can then leave you your positive feedback knowing there are no problems. If you experience any issues with your purchase we will do our utmost to help. Please do allow us the opportunity to work with you to resolve any issues prior to leaving feedback. Your opinion matters to us!

  • Condition: New
  • Wire kit size: Micro
  • Brand: Railwayscenics
  • Control: Digital
  • Power Supply: DC or DCC
  • Country/Region of Manufacture: United Kingdom

PicClick Insights - DCC Power Bus Wire Kits for Hornby Model Railway from Railwayscenics PicClick Exclusive

  •  Popularity - 13 watchers, 0.0 new watchers per day, 293 days for sale on eBay. Super high amount watching. 6 sold, 14 available.
  •  Best Price -
  •  Seller - 5,403+ items sold. 0.2% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive