KW Coilover Variant 3 inox 35243001 for MASERATI 3200 height adjustable

£2,723.95 Buy It Now, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: tunershop-germany ✉️ (24,922) 99.5%, Location: Naila, Bayern, DE, Ships to: GB, EUROPEAN_UNION, Item: 385406642703 KW Coilover Variant 3 inox 35243001 for MASERATI 3200 height adjustable.

KW Coilover Variant 3 inox Stainless steel drop front: 5-35mm drop rear: 10-40mm Max. front axle load: -1050kg Max. rear axle load: -1000kg KW Part#: 35243001 EAN: 4250173317313 Variant: Coilover Variant 3 inox Set consists of: Set FA + RA coilover struts Height adjustable front/rear: Thread/Thread Damper adjustment: rebound and compression damping TÜV Certification: Part certificate (§19.3) Notes: 1,77 1 Height adjustable on the front and rear axles (threaded strut housings) 77 At vehicles equipped with a factoy sport suspension kit the electronic damper control needs to be deactivated at your local Maserati dealer (Instructions for the deactivation are included in delivery) Fits for:
Brand Model Type Version Body Engine Engine KW Engine ccm Cylinder 4WD
MASERATI 3200 GT Coupe 338B32 (10/1998-03/2002) alle 3.2 Biturbo V8 32V Coupe Benzin 250 3217 8 Nein
MASERATI 3200 GT Coupe 338B32 (10/1998-03/2002) alle 3.2 Biturbo V8 32V Coupe Benzin 271 3217 8 Nein

KW Coilover Variant 3 inox Performance, high level of sportiness and comfort with racing technology for the road. Separately adjustable compression and rebound stage damping. Cutting-edge motor sports technology for more performance on the road. With compression and rebound stage damping, that can be set separately and independently of each other, the damper setup can be customized to your own driving preferences or vehicle changes such as weight, tire characteristics or altered vehicle rigidity. True performance optimization is only possible with this unique, patented system. For example, this allows the compression damping force to be increased and get more grip from the tires, to improve cornering behavior and reduce squat without simultaneously altering the rebound stage damping which is optimally matched to the spring rate – a scenario which results in reduced grip and the associated loss of performance. Setup – factory-set pre-configured damper setup with separately adjustable compression and rebound stage damping The KW coilover kit Variant 3 "inox-line" is the ideal accessory for performance-oriented drivers and tuning enthusiasts who place a high demand on sportiness at their vehicles. The dampers with their “TVR-A” and “TVC-A” technology that are separately adjustable in rebound and compression damping allow an extensive damper setup. So it is easy to directly influence the steering behavior, directional stability, tire grip and handling characteristics for a safe controllability at the limit. TVR-A rebound stage damping (Twin Valve Rebound – Adjustable): The two-step, patented “TVR-A” technology enables the small volume to flow through an adjustable, conical low-speed bypass in the case of slow damper speeds, while in the case of higher piston speeds, the main rebound stage valve opens for the large volume flows. This provides a big improvement in terms of ride comfort without influencing the high-speed in the safety-relevant range. There are 16 precise clicks available for individual settings, so you can choose between more comfort or more body control. TVC-A compression stage damping (Twin Valve Compression – Adjustable): With 12 precise clicks the adjustable compression stage valve (“TVC-A”-technology) can increase or decrease the cross section in the low-speed valve to achieve either more or less compression stage damping. At the same time, in the case of sudden high piston speeds, the spring pre-tensioned needle valve and the spring pre-tensioned main valve open to their maximum valve cross section, to avoid with its blow-off characteristics undesired progressive force increase in the high-speed range. This allows a better bracing of the vehicle body and at the same time at high wheel acceleration offering more comfort than with conventional valve technology. The compression stage damper setting is always supplied in combination with a separate rebound stage setting, as only an independent 2-way damper setting allows a true performance optimization. Continuously lowering The KW Variant 3 allows a maximum or individual lowering within the tested adjustment range. Due to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the continuously lowering can be varied quickly and easily, even after the years. The benchmark for coilovers As with all KW coilovers, the engineers at KW develop in extensive test cycles on the Nürburgring Nordschleife and in our test center on the KW 7-post rig the vehicle-specific KW damper setup estimated by car enthusiasts worldwide. So you will experience your car even more directly and dynamically with a KW coilover kit. After all, you do not buy just any coilover kit, but a KW coilover kit that has been especially developed and adapted for your vehicle type. KW as manufacturer exclusively uses own resources, high-quality components and the same damper technology as high-volume manufacturers. With the KW coilover suspension Variant 1 “inox-line”, the roll and pitch movements of the vehicle body are reduced during compression, so you benefit from an unadulterated directness and a sportier handling while driving. KW experiences for your driving pleasure For more than 20 years, KW as manufacturer have been the market leader and innovator of individual suspension solutions for the street and racing applications. No matter where in the world, sporty drivers, automobile manufacturers and refiners rely on our KW coilovers “Made in Germany”. Every KW coilover kit undergoes extensive stress tests during production and is developed and manufactured directly in KW company headquarters in Fichtenberg in order to meet the high standards of KW quality management
  • Rebound and compression damping adjustable damper technology
  • Stainless steel technology "inox-line"
  • Individual, continuous lowering
  • TÜV-tested adjustment range
  • High quality components for a long life
  • Complete documentation for an easy handling
  • Adjustable rebound damping
  • Adjustable compression damping
  • Unique, independent from each other working damping force adjustment
    • Condition: New
    • Brand: KW
    • Shock Absorber Type: Thread/Thread
    • Features: 100% Accuracy of Fit, Easy to Replace
    • Manufacturer Part Number: 35243001
    • Country/Region of Manufacture: Germany
    • Fits for: MASERATI 3200
    • Free shipping within UK: No import fees, additional duties or taxes will apply!
    • EAN: 4250173317313
  • PicClick Insights - KW Coilover Variant 3 inox 35243001 for MASERATI 3200 height adjustable PicClick Exclusive

    •  Popularity - 0 watchers, 0.0 new watchers per day, 413 days for sale on eBay. 0 sold, 2 available.
    •  Best Price -
    •  Seller - 24,922+ items sold. 0.5% negative feedback. Great seller with very good positive feedback and over 50 ratings.

    People Also Loved PicClick Exclusive