FM Radio BT 1000M Interphone Bluetooth Motorbike Motorcycle Helmet Intercom
Main Features
Wireless headset for Bluetooth enable cell phone at a range of up to 10 meters.
Bike-to-bike intercom for rider& passenger or two separate bikes up to 800-1000 meters.
Up to 10 hours talk time when connected to cell phone.
Up to 6 hours talk time when using the intercom feature.
Up to 300 hours standby
Call out, call answer, call reject, and call hang up.
Receive a cell phone call automatically
Support audio transfer.
FM Radio function
Enjoy the cell phone music through A2DP or connect GPS
Control cell phone music through AVRCP: forward, backward, play, pause
Automatic switching among Bluetooth cell phone, intercom, stereo music.
With DSP echo cancellation and noise suppression technology, crystal clear voice quality is guaranteed in a high speed.
Button panel is water-proof and sun-proof, while the design is durable.
Description
The Inter Phone is a Bluetooth Headset designed for the motorcycle rider and passenger who wish to have clear and reliable wireless communications while riding. This headset is compatible with Bluetooth cellular phones and can be suited to any sort of helmet for motorcyclists.
Technical Specifications
Bluetooth version: 3.0+EDR
Frequency: 2.4GHz
Supports: A2DP and AVRCP
Supported Bluetooth Profiles: Bluetooth Headset and Hands free Profiles with Automatic Detection
Operating Range: Up to 10m for cell phones
Battery Type: Rechargeable Lithium Polymer 350mAh
Stand by: Up to 300hrs
Talk time: Phone up to 10 hours, Intercom up to 6 hours
Charging Time: 3hours
Power Adaptor: DC5V 500mA
Features description
* can be realized Bluetooth helmet headset with helmet headset 800 meters (Or 800-1000 meters) meters of direct full-duplex intercom;
* can be achieved Bluetooth and cellular phones, intercom calls, stereo music and automatic switching between them;
* Mobile phone first, calls automatically switch to the mobile phone to answer calls, hang up automatically after recovery intercom;
* FM Radio function
* can be accessed by telephone, refused to telephone and hang up;
* Support for voice switching;
* Through the transmission over A2DP to enjoy the music through mobile phones or connected GPS;
* can be controlled via mobile phone music AVRCP play, pause, previous song, next song played;
* There are rumors DSP noise reduction and processing, high-speed exercise to ensure a clear call quality;
Turning the unit on into standby mode:
Press and hold the power/intercom button at the end of the unit. After 3 sec you will hear a "Di" and the blue LED will begin to flash. Let go of the button and the unit is now in standby mode.
Turning off the unit:
Press the power /intercom button for 5 seconds or until you hear 2 "Di" tones and the lights extinguish.
To pair to your Bluetooth enabled mobile phone:
When the unit is off, press and hold the power/intercom button at the end of the unit. Hold the button until you see a RED AND BLUE light flashing. It normally takes around 5-8 seconds from off. Do not let go when you see the blue light. You will also hear a "DuDu" tone when the unit enters pairing mode. On your phone, search and attempt to pair to the device, when the device is flashing red and blue. If requested the pairing code will be 0000 and you should set the phone to auto pair to the device.
To Pair 2 devices in intercom mode
-When both devices are turned off, press and hold the power /intercom button on both devices until both units flash red/blue repeatedly. You need to hold the button for more than 6 seconds and don't let go when you see the blue light.
-Short press the power /intercom button on ONE of the two devices and this device will search and auto-pair to the other in intercom mode. A live call will be initiated.(Intercom will start)
-If this fails retry it ensuring both red/blue light sequences are initiated simultaneously and are close together. Also ensure any other Bluetooth devices are turned off.
-When paired, you do not need to go into pairing mode again. In future you only need to go into standby mode (blue light flashing) on both units and press the button on one of the devices.
To Pair 3 devices in intercom mode
-Follow the above procedure for each combination of the three units. (A-B, B-C, A-C).
-Ensure the third unit is switched off when pairing the other two devices.
-Only 1 connection can be live at a time. When successfully paired the connections can be switched by ending any live call and returning to standby.
-From Standby press the power/intercom button 1 time for one of the pairings to be called, or long press (about 2 seconds) for the other pairing to be called.
-The pairing for 1 or 2 presses will depend on the sequence in which you paired the 3 helmets, but once paired the relevant pairings will maintain the number.
-i.e. A will press the power/intercom button 1 time to call B and long press(about 2seconds)to call C. B will press the button 1 time to call C and long press(about 2seconds) to call A. C will press the button 1 time to call A and long pesee(about 2seconds) call C.
To Reset the pairing memory
-If you have problems pairing, then it is best to reset the pairing memory
-Turn on the relevant unit into standby mode. Press the power/intercom button for 3-5 seconds till a "dudu" can be heard.
-Let go of the button when the tone is heard (The unit will turn off)
-Restart, the memory will be erased. (Repair again)
To Start FM radio
After turn the unit on, Long press Phone button about for 1 second (till hear "du" tone), let go of the button, FM radio will start.
Short press:"+" or "-" button you can adjust the channel.
Package Contents
1 X BT-S1 Heaset
1 X Heaset Clip
1 X Screw Driver
1 X Velcro Pad
1 X Travel Adaptor (Only UK AC Adapter available)
1 X USB Charging Cable
1 X User Maual