NANO GPIO Expansion Breakout Board Sensor Shield Module for Arduino V3.0

£9.99 Buy It Now, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: themicrohut ✉️ (7,356) 99.9%, Location: London, United Kingdom, GB, Ships to: EUROPE, Item: 175698890796 NANO GPIO Expansion Breakout Board Sensor Shield Module for Arduino V3.0.

Expansion Breakout Board inc. DuPont cable & optional NANO V3.0
The Nano 3.0 Expansion Adapter is a baseboard that mounts the Arduino Nano 3.0 and compatibles and brings the I/O out to a series of headers.   These headers also include dedicated 5V and ground pins for each I/O pin for easy hookup of both digital and analog sensors.   I2C SDA and SCL lines brought out to a separate 4-pin header along with 5V and Ground allows a nice and simple connection for modules such as OLEDs. One of the weaknesses of the Nano itself is the fact that it can only supply 25mA of 3.3V power.  The adapter includes a separate AMS1117-3.3 regulator which is fed from the 5V pin on the Nano that allows for up to about 200-300mA to be drawn.  This 3.3V is available on a 6-pin header along with ground.  Since this regulator is fed off the Nano on-board 5V regulator, the maximum current available will depend on how much of a load is also being put on the 5V.  The total load on the 5V regulator should typically be kept down to around 500mA or so to avoid overheating. The I/O is brought out to solder pads laid out in an Uno footprint along the edges of the board.   The assembly can mount female or male headers (not supplied) on either side for additional flexibility such as using it with an UNO compatible shield. Features: Dedicated 5V / Ground for each I/O Pin RX/TX lines brought out to a separate 4-pin header along with 5V and Ground. I2C SDA and SCL lines brought out to a separate 4-pin header along with 5V and Ground. I/O is brought out to solder pads laid out in UNO footprint. Standard DC 5.5/2.1mm jack for supplying power. DC input range is 7-12V. The input has a 1A/1000V reverse polarity protection diode and 100uF and 0.1uF filter caps.  This DC input power is connected to the VIN pin on the Nano to power it.  3.3V built-in regulator Optional Nano V3 ATMEGA328P 5V 16MHz with CH340G serial chip. Pre-tested - programmed for LED to double-blink and to output 'The Micro Hut'. Resources for NANO: CH340 version 3.4.2014 drivers required : Mac OSX, Windows, Linux CH340G Drivers - Google 'Sparkfun How to Install CH340 Drivers' Specifications: DC power connector: 7V to 12V 14 pins of I/O in servo configuration (with power and ground) 8 analogue pins with ground and power 6 pins PWM I2C port UART port AREF output  Output 3.3V Board size: 57 x 53 x 12 mm Package includes: 1x I/O Expansion Breakout Board 1x 10-wire DuPont cable. Please specify Female-Female (default), Male-Female or Male to Male. May consist of one or two sections. Optional: 1x NANO V3.0 (soldered pins) 1x Mini USB Data cable Important Note:     Our goal is to achieve 5-star rating for each transaction.     If you are not 100% satisfied, PLEASE do not leave a neutral or negative feedback but contact us by eBay message or email first so that we can help you.

Postage


All of our products are stocked at our London premises therefore there are no delays in posting. Orders placed before 3pm for delivery by Royal Mail will be dispatched the same day, Monday - Friday (excluding public holidays). Orders placed before 11am for delivery by EVRi/Yodel/DPD will be dispatched the same day, Monday - Friday (excluding public holidays). All orders are processed by third party dispatching software and therefore eBay's confirmation dispatch email may be delayed.  Orders dispatched via Royal Mail may be upgraded to Signed-For or Tracked service at our discretion.  Average delivery times for Royal Mail are 1-3 days for 1st/24 and 3-5 days for 2nd/48. Only Royal Mail's Special Delivery service is guaranteed next working day (Mon-Fri) service.  Most items which are not received are caused by incomplete addresses such as no door number, or incorrect street name or postcode.

Payment


Payment is via eBay's checkout facility. Once payment has been same, requests for change of delivery address will not be accepted due to eBay's Buyer Protection Scheme.  Orders must be cancelled and reordered with the correct delivery address.   Warranty
If you have simply changed your mind or no longer require the item(s), you must notify us within 30 days from receiving your order.  The item(s) must be in their original unused and unopened packaging and be in a resalable condition for a full refund.  You will need to pay for the cost of returning the item(s) and the item(s) remain your responsibility until we receive them. Damaged caused during transit must be notified within two days of the delivery. All items sold as tested are genuinely tested before dispatch. Product(s) which show obvious signs of misuse, damage or weather damage will not be eligible for refund or replacement. All items are security marked.  Please ensure all security markings and stickers are intact or any warranty offered will be void. All items are subject to satisfactory inspection of the anti-tamper warranty sticker/seal. Any evidence that these aforementioned stickers/seals have been removed or broken will render the item out of warranty and will not be covered under warranty rules.  If the item becomes faulty within that period a replacement will be issued free of charge upon receipt of the faulty item, back to us, if proved to be faulty upon inspection.  If the item is not faulty or can be repaired, not to the detriment of the item, then this shall be undertaken rather than direct replacement.  Warranty Exclusion: Please note that as batteries are "consumables" we only provide dead on arrival warranty.  The maximum capacity of all rechargeable batteries fades with time depending on application and usage patterns.  This is considered normal - therefore, a change in battery capacity is not covered under warranty.  Battery life is not warranted and will vary depending on usage. Please note- Any software is not covered by the warranty policy. Please refer to the copyright owner for specific details.
  • Condition: New
  • NANO V3.0: Yes
  • Brand: Unbranded
  • Series: Nano
  • Type: Sensor Development Board
  • Unit Type: Unit
  • Bundle Description: inc. DuPont cable & optional NANO V3.0
  • Custom Bundle: Yes
  • Country/Region of Manufacture: China
  • Unit Quantity: 1
  • Core: Arduino

PicClick Insights - NANO GPIO Expansion Breakout Board Sensor Shield Module for Arduino V3.0 PicClick Exclusive

  •  Popularity - 1 watcher, 0.0 new watchers per day, 342 days for sale on eBay. Normal amount watching. 1 sold, 4 available.
  •  Best Price -
  •  Seller - 7,356+ items sold. 0.1% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive