Surface Grinding Dust Shroud for 150mm Angle Grinder Grinding Cup Wheel Disc

Surface Grinding Dust Shroud for 150mm Angle Grinder Grinding Cup Wheel Disc Description Specification:
Item Type: Grinding Dust Shroud
Cover Outer Diameter: Approx. 150mm / 5.9in
Cover Height: Approx. 28mm / 1.1in
Pipe Outer Diameter: Approx. 31/35/38mm
Suitable for Models: 100/125 Type
Clamping Inner Diameter: 41-54mm
Grinding Wheel Standard: 100-115mm
Abrasives: Bowl Mill / Flap Disk
Suitable for Installation: Diamond Disc / Flap Disk / Sanding Disc
Grinding Application: Concrete / Frp / Resin Board

Installation Steps:
1. Loosen 1 bracket screw
2. Set on the angle grinder head
3. Tighten the hoop
4. Tighten the bracket screws

Content:
1 X Protective Cover
1 X Grinding Wheel
1 x Wrench
1 X Adapter
1 x Accessory Payment 1. All payments must be prepaid.
2. We only accept payment via eBay. Please kindly check if you can do the payment via eBay before placing an order,Payment must be received within 7 days after order is made. Delivery 1. We are not responsible for undeliverable address. We reserve the right to charge the shipping fee again for returned items due to wrong address.
2. Items are generally shipped out the next business day after your payment has been cleared (Sat. & Sun. excluded.)
3.By Royal Mail shipping 2-3 days Contact us Our services are available: Monday To Friday: 8:30 to 18:00.
1. We are in different time zones, during the working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and considerable to give us a little more time.
2, please contact us with ebay message if we made a deal on ebay. E-mail is often filtered as spam.
3, Please wait for our reply to your email, we will do our best to help you solve the problem. Specification:
Item Type: Grinding Dust Shroud
Cover Outer Diameter: Approx. 150mm / 5.9in
Cover Height: Approx. 28mm / 1.1in
Pipe Outer Diameter: Approx. 31/35/38mm
Suitable for Models: 100/125 Type
Clamping Inner Diameter: 41-54mm
Grinding Wheel Standard: 100-115mm
Abrasives: Bowl Mill / Flap Disk
Suitable for Installation: Diamond Disc / Flap Disk / Sanding Disc
Grinding Application: Concrete / Frp / Resin Board

Installation Steps:
1. Loosen 1 bracket screw
2. Set on the angle grinder head
3. Tighten the hoop
4. Tighten the bracket screws

Content:
1 X Protective Cover
1 X Grinding Wheel
1 x Wrench
1 X Adapter
1 x Accessory

• Condition: New
• Brand: Unbranded
• Type: Grinding Dust Shroud
• Cover Outer Diameter:: Approx. 150mm / 5.9in
• Cover Height:: Approx. 28mm / 1.1in
• Pipe Outer Diameter:: Approx. 31/35/38mm
• Suitable for Models:: 100/125 Type
• Clamping Inner Diameter:: 41-54mm
• Grinding Wheel Standard:: 100-115mm
• Abrasives:: Diamond Disc / Flap Disk / Sanding Disc
• Grinding Application:: Concrete / Frp / Resin Board

See More