UJK Variable Angle Kitchen Worktop Jig

£99.98 Buy It Now, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: axminstertools ✉️ (89,147) 99.9%, Location: Axminster, GB, Ships to: GB, Item: 351896711397 UJK Variable Angle Kitchen Worktop Jig. Trusted Seller view our feedback - 24 hour dispatch - Fast & Free delivery

UJK Variable Angle Kitchen Worktop Jig Code: 508615 Ask a question Follow Axminster
  • View similar products
  • View search results for UJK
  • Join our mailing list

Key Features
  • Phenolic resin jig covers all common cuts in kitchen worktop preparation
  • Enables 45° and 90° male and female cuts
  • Apertures for 65-150mm worktop connectors
  • Peninsular joints, square and 45° and 22.5° angle cuts
  • Hinge recesses and tap holes
  • Optional Angle Adjustment Plate allows perfect out of square joints 85° to 95° (sold separately)

Supplied with full and comprehensive instructions and a pack of 4 aligning pins.

In Detail

This one jig can offer so much scope. It is capable of 45° and 90° left or right hand joints in worktops with widths of 250/300/400/450/500/550/600/616/620/650/700mm. It enables you to make peninsular joints, corner radii of 40mm, 100mm, 90° square end cuts plus 45° and 22.5° angle cuts. In addition, there are facilities for cutting 35mm cabinet door hinge recesses (18mm carcass), a hole for tap fixings 35mm (3/4" BSP) and three slots for 65mm and 150mm joining bolts. There is also an extra hole for 635mm width of worktops included in the jig. The jig is CNC cut from 12mm thick solid compact phenolic resin which is very stable and doesn't warp. Permanently engraved into the top are instructions, diagrams and pin-hole locations.

This professional patented kitchen worktop jig is also able to solve problems regarding out of square joints. With the addition of the optional accessory, the Angle Adjustment Plate, (sold separately) the jig will cut accurate left and right hand joints between 85° and 95°. The Angle Adjustment Plate sits in the slot provided and adjustment is made to change the angle of the male joint. With the addition of the Plate you can use the jig to find and set the angle required ensuring a perfect joint every time.

Supplied with full and comprehensive instructions and a pack of 4 aligning pins.

You will also need 1/2" router, 12.7mm(1/2") x 50mm router cutter, 30mm guide bush and 2 clamps.

Delivery Information

If you have any specific delivery requirements, please contact us via the eBay Messenger by clicking on the "ask a question" link near the bottom of the listing (You may be asked to sign in) as soon as payment is made for the item won/purchased. We will be happy to make arrangements and accomodate the delivery where possible.

Our aim is to despatch your order the same day, for delivery the next working day (Monday - Friday). All orders under 2kg are sent via Royal Mail 1st Class - please allow up to 5 working days for delivery.

Please also be aware that where your order contains an item greater than 30kg in weight, the order may be delivered using a 'kerbside' type delivery. This means the driver is only contracted to deliver to the outside of the premises and may need assistance offloading.

Further information:

  • Orders below 30kg - We are only able to ship to the UK Mainland, Isle of Wight, Scilly Isles, Scottish Highlands, Scottish Islands & Northern Ireland.
  • Orders over 30kg (except for "Large Delivery" items) - We are only able to ship to the UK Mainland, Northern Ireland & Isle Of Wight.

Please note: We do not export goods purchased through our eBay Store outside of the UK.

Returns

Items sold as "New" or "New Other (See Details)" will carry the standard manufacturer's warranty, which is usually 1 Year unless stated otherwise.

Should you encounter any problems (Faulty, Damaged, Incorrect Item Received or Not as Described), in the first instance please contact us via eBay Messenger (by clicking on the "ask a question" link near the bottom of the listing) and we can action the enquiry accordingly (If the item is damaged in transit, please advise within 7 days from receipt). If the item is damaged or faulty we will typically repair the machine or provide spare parts, dependant on the fault. If this isn't possible, we will be happy to offer a direct replacement or refund you in full via the original payment method used.

*If you are wanting a refund for the goods you have 30 days in which to initiate the return with eBay and we will then provide you with a "Returns Reference Number" to send back with the goods. We will use our respective carrier service or provide a free post label for the return of any goods which are "Faulty", "Not As Described" or "Damaged" only.

**If you are missing parts which are listed as inclusive with the item, please contact us via eBay Messenger and we can arrange for the parts to be sent on accordingly.

If the item is being returned due to not being required or if you change your mind... you then have 30 days in which to return the product, providing it is unused and in the same condition as per received. Please advise us again with eBay Messenger if you are wanting to proceed with a return. Alternatively please open an eBay Return and we will provide you with a "Returns Reference Number" to send back with the goods.

*Carriage charges for unwanted returns will be at the Buyers expense. Transport packaging should be sufficient for the method of carriage. We cannot accept any responsibility for damage caused by your carrier.

Feedback

We here at Axminster, pride ourselves on Customer Service and in the unlikely event you experience any problems or faults with your purchase, before leaving feedback for us, please contact us directly via eBay Messenger by clicking on the "ask a question" link near the bottom of the listing (You may be asked to sign in*). We will endeavour to rectify any issues you may have with your item/s or if there are any discrepancies with the description, in relation to the item/s received.

Terms & Conditions

When you order products from us they will be sold to you by Axminster Tool Centre Ltd. Full Terms & Conditions can be found on our main website.

Browse
  • Power Tools
  • Machinery
  • Hand Tools
  • Health, Safety & Workwear (PPE)
  • Benches, Vices & Storage
  • Abrasives, Cleaners & Finishing
  • Adhesives, Fixings & Hardware
  • Accessories
  • Clearance Sales
  • Other

© Axminster Tool Centre Ltd 2022

Description:

This one jig can offer so much scope. It is capable of 45° and 90° left or right hand joints in worktops with widths of 250/300/400/450/500/550/600/616/620/650/700mm. It enables you to make peninsular joints, corner radii of 40mm, 100mm, 90° square end cuts plus 45° and 22.5° angle cuts. In addition, there are facilities for cutting 35mm cabinet door hinge recesses (18mm carcass), a hole for tap fixings 35mm (3/4" BSP) and three slots for 65mm and 150mm joining bolts. There is also an extra hole for 635mm width of worktops included in the jig. The jig is CNC cut from 12mm thick solid compact phenolic resin which is very stable and doesn't warp. Permanently engraved into the top are instructions, diagrams and pin-hole locations. This professional patented kitchen worktop jig is also able to solve problems regarding out of square joints. With the addition of the optional accessory, the Angle Adjustment Plate, (sold separately) the jig will cut accurate left and right hand joints between 85° and 95°. The Angle Adjustment Plate sits in the slot provided and adjustment is made to change the angle of the male joint. With the addition of the Plate you can use the jig to find and set the angle required ensuring a perfect joint every time. Supplied with full and comprehensive instructions and a pack of 4 aligning pins. You will also need 1/2" router, 12.7mm(1/2") x 50mm router cutter, 30mm guide bush and 2 clamps.
  • Condition: New
  • Brand: UJK
  • EAN: 5052511093427
  • MPN: 700VWTJ
  • Manufacturer Part Number: 700VWTJ
  • Type: Tools & Accessories

PicClick Insights - UJK Variable Angle Kitchen Worktop Jig PicClick Exclusive

  •  Popularity - 31 watchers, 0.0 new watchers per day, 2,702 days for sale on eBay. Super high amount watching. 37 sold, 10 available.
  •  Best Price -
  •  Seller - 89,147+ items sold. 0.1% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive