The new Zimo MX600R Decoder. The intention of creating this decoder type is to produce a decoder quite similar to a Lenz or ESU Standard decoder and to make the decoder as attractive as possible, with a focus on the things that it "really needs", omitting features which are superfluous for most modellers. With ZIMO, the actual reductions compared to the "normal" decoders are small and for the intended use (i.e. for DCC operation without SUSI and servos). The term "Flat Decoder" is due to the low height of the placement of all components on one side (2 mm). This also makes a lower price possible than other ZIMO decoders with components on both sides of the printed circuit board. Cost optimization has been achieved with the circuitry and components, but for the vast majority of applications, the MX600 still a full blown ZIMO decoder Dimensions: 1.00 x .44 x .079 inches (25 x 11 x 2 mm) 8 Pin Connector Features: 0.8A continuous, 1.5A peak power 14, 28, 128 speed steps 3-way adjustable back-EMF selectable frequency, low 50 to 150Hz / high 20kHZ to 40 kHz for noiseless operation! for all DC motors inclusive core less NMRA bidirectional communication (RailCom) 3-point or individual speed table short circuit protected thermal protection reliable overload protection 5 digit addressing 4 function outputs all lighting effects with programmable timing and dimming firmware can be updated by the user via Internet!
If you have any questions on this item please contact me through the contact sellers option or on douglas@wicknessmodels.co.uk .
Be sure to add me to your favorites list !
Check out my other items !
Check out our other items in our eBay |