ESP32-DevKit C WIFI Bluetooth Development Board with ESP32-DevKitC-WROVER Type-C

Store Categories

Store Categories

• Business, Office & Industrial
• Computers/Tablets & Networking
• Garden & Patio
• Home, Furniture & DIY
• Mobile Phones & Communication
• Sound & Vision
• Toys & Games
• Vehicle Parts & Accessories
• UK WAREHOUSE
• Other

ESP32-DevKit C WIFI Bluetooth Development Board with ESP32-DevKitC-WROVER Type-C

Product View

Detail

Features 1.ESP32-DevKitC development board, the new version of the mainstream TYPE-C interface, the backplane can be equipped with ESP32 modules: ESP-WROOM-32,ESP-WROOM-32D,ESP-WROOM-32U, ESP32-WROVER.
2.ESP32-DevKitC is an entry-level ESP32 development board with integrated ESP32 pins pinned out for easy connection and use. It can be used to evaluate the full range of ESP32 modules and chips, and can be easily plugged into a breadboard.
3.ESP32-DevKitC is a small development board based on ESP32 modules, supporting Wi-Fi and Bluetooth functions. The board has a rich set of peripherals, so users can easily realize product development.
4.The on-board LDOs are led out to supply power for external components.ESP32-DevKitC groups different peripheral interfaces to help users get started with product development easily.
5. The ESP32-DevKitC has excellent RF performance, allowing users to design and develop applications without having to consider RF and antenna design. The basic system requirements are already included on the development board, so users only need to connect the USB cable for development.   Specification
ESP32-DevKitC development board:
ESP32 based module
EN: Reset button.
Boot: Download button. Press and hold the Boot key, and press the EN key at the same time (do not release the Boot key at this time) to enter the "Firmware Download" mode and download the firmware through the serial port.
USB-to-UART Bridge: Single chip USB-UART bridge that provides up to 3 Mbps transfer rate.
Interface: TYPE-C connector that can be used as a power supply for the board or as a communication interface between the PC and the ESP32-WROOM-32 module.
Communication: 2.4 GHz Wi-Fi + Bluetooth
Processor: high-performance Xtensa@32-bit LX6 dual-core processor with ultra-low power co-processor.
Multiple peripherals: Optimal power performance, RF performance, stability, versatility and reliability for various application scenarios and power requirements.
The board can be powered by one of the following three power supply options:
TYPE-C connector power supply (default)
5V/GND pin supply
3V3/GND pin supply
Dimension: 54.4*27.9mm   Module Performance:   ESP32-WROVER
Supply Voltage: 2.3V ~ 3.6V
Frequency: 2.4 GHz ~ 2.5 GHz
Mounting Type : SMT
Data Rate: 150Mbps
Protocol: 802.11b/g/n
Storage Capacity: 4MB
Wi-Fi Protocol: 802.11 b/g/n (802.11n with speed up to 150 Mbps)
A-MPDU and A-MSDU aggregation with 0.4 µs protection interval support
Operating channel center frequency range: 2412 ~ 2484 MHz
Bluetooth protocol: Compliant with Bluetooth V4.2 BR/EDR and Low Power Bluetooth standards
RF: NZIF receiver with -97 dBm sensitivity
Class-1, Class-2 and Class-3 transmitters; AFH
Module interfaces: SD card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, IR, Pulse Counter, GPIO, Capacitive Touch Sensor, ADC, DAC, TWAI® (ISO 11898-1 protocol compliant, i.e. CAN specification 2.0)
On-chip sensors: Hall sensors
Integrated crystal: 40 MHz crystal
Integrated SPI flash: 4 MB
Integrated PSRAM: 8 MB
Operating voltage/supply voltage: 2.3 V ~ 3.6 V
Operating Current: Average: 80 mA
Minimum supply current: 500 mA
Recommended operating temperature -40 °C ~ 85 °C   List
1/3/6 x Development Board

• Shipping Policy
• Payment Method
• Returns Policy

Shipping Policy

We only accept your Ebay Address , Please Make sure it's 100% right.

The items you ordered will be shipped out in 3 business day by Hong Kong Air Mail when your payment is clear.

We maintain high standards of excellence and strive for 100% customer satisfaction!

Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutralor or negative feedback, so that we can satisfactorily address your concerns.

            Payment Method Returns Policy

Copyright © 2017 DataCaciques

• Business, Office & Industrial
• Computers/Tablets & Networking
• Garden & Patio
• Home, Furniture & DIY
• Mobile Phones & Communication
• Sound & Vision
• Toys & Games
• Vehicle Parts & Accessories
• UK WAREHOUSE
• Other

Product View

Detail

Features 1.ESP32-DevKitC development board, the new version of the mainstream TYPE-C interface, the backplane can be equipped with ESP32 modules: ESP-WROOM-32,ESP-WROOM-32D,ESP-WROOM-32U, ESP32-WROVER.
2.ESP32-DevKitC is an entry-level ESP32 development board with integrated ESP32 pins pinned out for easy connection and use. It can be used to evaluate the full range of ESP32 modules and chips, and can be easily plugged into a breadboard.
3.ESP32-DevKitC is a small development board based on ESP32 modules, supporting Wi-Fi and Bluetooth functions. The board has a rich set of peripherals, so users can easily realize product development.
4.The on-board LDOs are led out to supply power for external components.ESP32-DevKitC groups different peripheral interfaces to help users get started with product development easily.
5. The ESP32-DevKitC has excellent RF performance, allowing users to design and develop applications without having to consider RF and antenna design. The basic system requirements are already included on the development board, so users only need to connect the USB cable for development.   Specification
ESP32-DevKitC development board:
ESP32 based module
EN: Reset button.
Boot: Download button. Press and hold the Boot key, and press the EN key at the same time (do not release the Boot key at this time) to enter the "Firmware Download" mode and download the firmware through the serial port.
USB-to-UART Bridge: Single chip USB-UART bridge that provides up to 3 Mbps transfer rate.
Interface: TYPE-C connector that can be used as a power supply for the board or as a communication interface between the PC and the ESP32-WROOM-32 module.
Communication: 2.4 GHz Wi-Fi + Bluetooth
Processor: high-performance Xtensa@32-bit LX6 dual-core processor with ultra-low power co-processor.
Multiple peripherals: Optimal power performance, RF performance, stability, versatility and reliability for various application scenarios and power requirements.
The board can be powered by one of the following three power supply options:
TYPE-C connector power supply (default)
5V/GND pin supply
3V3/GND pin supply
Dimension: 54.4*27.9mm   Module Performance:   ESP32-WROVER
Supply Voltage: 2.3V ~ 3.6V
Frequency: 2.4 GHz ~ 2.5 GHz
Mounting Type : SMT
Data Rate: 150Mbps
Protocol: 802.11b/g/n
Storage Capacity: 4MB
Wi-Fi Protocol: 802.11 b/g/n (802.11n with speed up to 150 Mbps)
A-MPDU and A-MSDU aggregation with 0.4 µs protection interval support
Operating channel center frequency range: 2412 ~ 2484 MHz
Bluetooth protocol: Compliant with Bluetooth V4.2 BR/EDR and Low Power Bluetooth standards
RF: NZIF receiver with -97 dBm sensitivity
Class-1, Class-2 and Class-3 transmitters; AFH
Module interfaces: SD card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, IR, Pulse Counter, GPIO, Capacitive Touch Sensor, ADC, DAC, TWAI® (ISO 11898-1 protocol compliant, i.e. CAN specification 2.0)
On-chip sensors: Hall sensors
Integrated crystal: 40 MHz crystal
Integrated SPI flash: 4 MB
Integrated PSRAM: 8 MB
Operating voltage/supply voltage: 2.3 V ~ 3.6 V
Operating Current: Average: 80 mA
Minimum supply current: 500 mA
Recommended operating temperature -40 °C ~ 85 °C   List
1/3/6 x Development Board

• Shipping Policy
• Payment Method
• Returns Policy
• Feedback
• Contact Us

Shipping Policy

1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.

2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.

3.Usually, the package will be delivered in about 30 days, some remote areas may wait longer.

Payment Method

1.We accept PayPal payment, and must be received within 5 days from the date of purchase.

2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.

3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.

Returns Policy

1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.

2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.

3. Please include your eBay ID and item number with any email requests.

Feedback

1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback or open a case without asking for help.

2.Please DON'T leave negative / neutral feedback or open case if you haven't received item in 30 days, International shipping is uncontrollable, sometimes the package may be delayed, If you have't receive item in time, Please remember to contact us to resolve.

Contact Us

1. If you have any questions, please feel free to email our service specialists.

2.Just contact us using the " Ask the seller a question" link on eBay.

3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.

• Condition: New
• Optional Style: 1PCS
• Brand: Unbranded
• Type: ESP32-DevKitC Core Board
• MPN: ESP32-WROVER
• Marke: Markenlos

See More