Welcome European customers to our shop ,we have this product in our Germany Warehouse,so we will ship this product from Germany to you directly |
|
100% Brand New and High Quality!!!
4 Axis off-line stand alone PLC controller (DDCS expert)
Introduction
Feature:
1) Max. 5 Axis; 1M Hz output frequency for each axis; 2-4 Axis linear interpolation, any 2 axis circular interpolation;
2) 7 inch full color display screen; resolution ratio: 1024*600, 40 operation keys;
3) 24 photoelectric isolated digital inputs, 21 photoelectric isolated digital outputs;
4) Analog spindle control 0-10V spindle control, also support PWM Output;
5) Magazine type: Supports multiple spindle mode, support straight Tool Magazine, gantry type Magazine, disk type magazine;
6) Probe Mode: Supprt Floating Probe and Fixed Probe;
7) Backlash compensation methods: direction gap compensation, radius gap compensation, length compensation;
8) Interpolation Algorithm: S type, circular hard algorithem, circular soft algorithm;
9) Language: Chinese, English;
10) Software Alarms: Program Error, operation Error, overtravel Error, Driver Error and so on;
11) Network: Support file share and online machining the remote files by Ethernet;
12) Spindle control mode support Multi-speed (3 lines 8 kinds speed), 0-10V Analog output, and servo spindle output;
13) Compatible with standard G-code, support popular CAD/CAM software, such as ArtCam, MasterCam, ProE, JDSoft SurfMill, Aspire, Fusion 360 and so on;
14) The control system can preview the processing path before machining, and it makes the system more steady, working smoothy and precise;
15) Support high speed machining in continuous Polyline segment, system can choose a most efficient algorithm automatically from different kinds Polyline segment algorithm;
16) Support un-limited size file for machining;
17) Support Pause Breakpoint resume, “Power Cut” recovery, Start from the specific line;
18) Support time-lock function;
19) Support 4 kinds operation rights: visitor, operator, admin,super admin;
20) Support function of “Try cutting” (handwheel guiding) and “Single-stage processing mode” and so on;
21) Support the fuction of Back to orignal point
21) The Power Supply for the controller is 24VDC, minimum Current is 0.5A;
The stepper / servo control output, the Pulse and Direction signal output voltage is ± 5V DDCSE Input and Output are the user-defined IO ports, In our example, we already set IN24 as the “ 5th axis servo alarm signal ” input port. |
DDCSE Input and Output are the user-defined IO ports, In our example, we already set IN12, IN11 and IN10 as the “ axis limit signal ” Input port, and we already set the IN09 as “ Probe ” output port. Please note that the limit switch type should be NPN Normal Open, and the voltage range is 24VDC. |
DDCSE Input and Output are the user-defined IO ports, In our example, we already set IN23 as the “ External Start ” input port, IN22 as the “ External Pause ” input port, and IN21 as “ Extertnal Stop ” input Port. please choose the external buttons which is 24VD power supply input,then no need an external power supply for them. |
DDCS-Expert wiring board, there are about 7 parts as following:
1) System Power and IO Power supply input Ports;
2) Driver Signal output Ports;
3) Input and Output Ports;
4) Spindle Output Ports;
5) MPG Port;
6) Ethernet and USB interface;
7) HMI/RS232 interface.
Shipping
· Please open the package and check if there are some damages before sign, if there are some damages,please do not sign and contact us immediately
· We ship to worldwide but if your country’s custom is strict, please contact us before you bid to check detail and confirmed.
· Please check out your address carefully when processing order.We are not responsible for wrong or undeliverable address.
Problem&Feedback
· Please give us the opportunityto resolve any problem when you have,we concern your problem and we will try our best to resolve it.
· If you are not satisfied, please contact us to resolve any issues. We work hard to make sure EVERY CUSTOMER 100% satisfaction.
· For any inquiries,issues or assistanceplease contact us via eBay message
Refund
· When you have the parcel,and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos to us.
· Any reason required for all refund. Item must be in it's original condition and no physical damage. Buyer responsible for all shipping cost
Contact us
· Please feel free for any questions, all the emails will be replied within 1-2 business days , i f you didn’t receive any mail, maybe it’s in the junk mail fold.
· We are online from Monday to Saturday .