Lacquer material:
ATTENTION!
H226 Flammable liquid and vapor.
H315 Causes skin irritation.
Harder:
ATTENTION!
H226 Flammable liquid and vapor.
H317 can cause allergic reactions to your skin.
H319 Causes serious eye irritation.
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H335 May cause respiratory irritation.
H336 May cause drowsiness and dizziness.
EUH066 Repeated contact can lead to brittle or cracked skin.
Dilution:
ATTENTION!
H226 Flammable liquid and vapor.
H315 Causes skin irritation.
H336 May cause drowsiness and dizziness.
You are bidding on a 5 liter set
2K car paint
GDR flame red in shine
(2 components, one coat)
Scope of delivery:
3 liter 2K car paint
GDR flame red in shine
(UNI no metallic)
(VOC compliant <420g / l)
1.5 liters hardener
0.5 liter dilution
With this color no clear coat needed unless you want it.
Ideally suited for painting or painting / rolling vehicles, motorbikes, trucks and much more ...
This 2K car paint is very easy to apply, it dries quickly and its glossy surface has a high weather protection, as well as a high one Resistance and is scratch-resistant.
With this 2K car paint you are up to date, which makes you stand out in everyday life and becomes an eye-catcher.
as a gift for you
1 mixing cup with scale 1: 1 - 5: 1
1 color sieve 190my
1 pair of gloves
Easy to process, low material consumption.
We guarantee absolutely new goods.
The surface should be grease and rust-free (sanded) to allow good adhesion.
processing
Sand the surface to be painted with the grit P500 random sander or P1000 to 1200 wet sandpaper and then degrease well (silicone remover).
When working on new or unpainted plastic surfaces, apply a plastic primer and note the drying time.
Then apply the filler or a primer (1.7 or 1.8mm nozzle size),
Processing temperature at least 20 ° C.
Sand the surface well with the appropriate grit from the wet sandpaper or smooth.
Then clean with silicone remover, the surface must be free of dust (recommended dust cloth) and free of grease.
Before processing the paint, the color must be checked (make spray samples).
Subsequent complaints are not possible.
No claim for compensation!
The 2K or basecoats should be processed with a 1.3 or 1.4 mm nozzle size with 2-3 spray passes and even pressure.
The temperature should be at least 20 ° C.
The 2K colors are approx. dry after 20-30 minutes. After 2 days the 2K paint has dried completely and after 4 days it has completely hardened.
If you are not satisfied with the gloss level or want to protect the paint, you can apply a 2K clear coat if you want.
For basic colors (ready to spray metallic or UNI), after approx. 20-30 minutes flash-off time (paint dulls) with a 2K clear varnish.
You will of course also receive everything for the preparation and post-processing for painting work and other great offers in our shop.
If you have any questions or information, please do not hesitate to contact us by phone or email.
Contact:
Looking for something and can not find it? If you have any questions, please do not hesitate to contact us Monday to Friday 8:00 a.m. to 8:00 p.m.
Bonus!
For each paint order, our customers receive a 3-piece starter set free of charge consisting of:
Checkout:
After winning the auction, at the latest after 2 hours, you will automatically receive an email from us with a link to our purchase process. Please refrain from requesting bank details from us! These will be communicated to you during the purchase process.
Some non-binding processing instructions:
Our primer recommendation:
We offer epoxy primer in our eBay shop. This creates rust protection and a filler structure at the same time. As a rule, these primers or fillers are gray. But that doesn't always fit. For example, you should use a white filler for red top coats so that the red tone gets a higher brilliance. Likewise, light-colored basecoats or varnishes with a high percentage of pearls often have low opacity. A pre-coat or the epoxy filler in the subsequent color is required there. Likewise, almost every new car is already pretreated on the line with a colored filler, which is cheaper even with small impacts, since the lower layer in the upper layer of paint is the same color. Likewise, a filler in the body color reduces the amount of top coat required because it covers faster.
Our covering recommendation:
If partial painting is required, we recommend that you purchase a paint-adhering paint protection hood that is available in the eBayshop. This wafer-thin hood resembling a folding garage is pulled over the vehicle and the section to be painted is cut out and taped. The entire vehicle is quickly covered and protected from spray mist.
Painting of plastics:
Plastics that have already been painted can easily be painted after roughening. If the existing paint layer has been sanded off or the plastic is raw, a bonding agent must be sprayed. If the plastic is exposed to vibrations, the paint can crack. In this case 20-30% plasticizer can be added to the last layer of lacquer. In our eBay shop we offer you high quality products that guarantee you a good result with professional execution of the work.
For paintwork:
Blending is also known as "spot repair". Prime the area to be painted and fillers. Adjacent clearcoat areas are also sanded. Paint the basecoat in thin layers from the inside out so that the paint mist does not settle on the surface. Only apply basecoat from the outside to the inside during the last spray coat. Now the clear coat is sprayed over the painted area. Then add 50% thinner to the clear coat and spray the transition area. Finally, again spray pure thinning over the entire area and the transition.
Plain paints in matt:
All uni-lacquers (single-layer 2-component lacquers) are high-gloss. These are usually mixed 2: 1 with hardener + 15% thinner. You can also get all of these 2K plain paints here in MATT. This new trend usually has to be mixed 4: 1 with hardener + 50% thinner. The price usually stays the same.
10L Novatic swimming pool color Pool color RAL 7015 slate gray chlorinated rubber concrete
Buy it now
5L Novatic swimming pool color Pool color RAL 7015 slate gray chlorinated rubber concrete
Buy it now
2.5L Novatic pool color Pool color 7015 slate gray chlorinated rubber concrete
Buy it now
750ml Novatic swimming pool paint Pool paint 7015 slate gray chlorinated rubber concrete
Buy it now
10L Novatic swimming pool color Pool color RAL 9010 pure white chlorinated rubber for concrete
Buy it now
5 L Novatic swimming pool color Pool color RAL 9010 pure white chlorinated rubber for concrete
Buy it now
2.5 L Novatic swimming pool color Pool color RAL 9010 pure white chlorinated rubber concrete
Buy it now
750ml Novatic swimming pool color Pool color RAL 9010 pure white chlorinated rubber concrete
Buy it now
10 L Novatic pool color Pool color LIGHT BLUE Chlorinated rubber concrete color
Buy it now
5 L Novatic pool color Pool color LIGHT BLUE Chlorinated rubber concrete color
Buy it now
2.5 L Novatic pool color Pool color LIGHT BLUE Chlorinated rubber concrete color
Buy it now
750ml Novatic swimming pool paint pool paint LIGHT BLUE chlorinated rubber concrete paint
Buy it now
Marke | Lackpoint |
EAN | Nicht zutreffend |
Farbcode | DDR Flammenrot |
Farbe | Rot |
Maßeinheit | L |
Lackart | Acryl Lack |
Komponentensystem | 2K |
Herstellernummer | Nicht zutreffend |
Anwendungsbereich | Lackieren & Ausbessern |
Anzahl der Einheiten | 5,0 |
Produktart | Set |