Ships to: GB,
Item:1534399974771KG CLEAR EPOXY COMPOSITION 714g resin + 286g hardener = 1kg Features: -Crystal clear -Low viscosity -Transparency -Possibility of obtaining smooth decorative substrates -UV resistance -Non toxic, Solvent free -Chemical resistance -Easy to maintain cleanliness -Does not contain nonylphenol Suitable for: -Moulding/Casting/Potting/Encasing. -Laminating/Adhesion/Wood -Boats/Yachts/Bicycles/Motorbikes (and repairs). -Art/Paintings/Crafts/Jewellery -Home Decorations -Tables (kitchen tops, garden tables, bars, wooden tables) -3D Floors - Epoxy number: 0.488-0.513 mol / 100g - Density at 25°C: approx. 1.10 g / cm 3 - Viscosity at 25°C: 500 - 900 mPa s Before use, mix the components of the composition in the following proportions: EPIDIAN®DECO -100 % wt. HARDENER DECO -40 % wt. Examples: Resin 357g - Hardener 143g = 500g Resin 536g - Hardener 214g = 750g Resin 714g - Hardener 286g = 1kg Resin 1071g - Hardener 429g = 1.5kg Resin 1429g - Hardener 571g = 2kg Resin 2000g - Hardener 800g = 2.8kg Resin 2500g - Hardener 1000g = 3.5kg Resin 3571g - Hardener 1429g = 5kg Once prepare the mixture portions not greater than 3 kg. Wear of resin EPIDIAN®DECO with Hardener DECO, when once applied is 1.0-1.1 kg/m2/1mm. (do not exceed the layer thickness of max 0.5cm) Temperature and humidity during the preparation, application and hardening of epoxy compositions have a great influence on the quality and properties of the coating. The optimal operating conditions is the temperature of 20° (not lower than 15°) and the relative humidity of 65%. Higher humidity on the hardened coating may result in turbidities, quartering and stickiness. Particularly critical for the appearance and quality of the substrate is lowering the substrate temperature while hardening below the dew point temperature. Condensate droplets formed on the substrate of the floor significantly lower the decorative qualities of the coating. In the case of making multi-layer coatings, the next layer can be applied after hardening the first one. The coating must be left for 16-24 hours at 20° C. If the interval between consecutive layers is more than 48 hours – it is necessary to matt, dedust and degrease the layer to which the next coating will be applied. In the course of hardening of subsequent coatings, the work area should be protected against flooding of water or other chemicals, as well as against dusting and draught. STRENGTH PARAMETERS: TESTED PARAMETER EPIDIAN®DECO + HARDENER DECO Bending strength, [MPa] PN-EN ISO 178:2006 66.60 72.60 Elasticity module at bending, [MPa] PN-EN ISO 178:2006 2380.00 2480.00 Deflection arrow, [mm] PN-EN ISO 178:2006 6.50 7.10 Breaking stress, [MPa] PN-EN ISO 527-1:1998 PN-EN ISO 527-2:1998 28.60 35.50 Elasticity module at stretching, [MPa] PN-EN ISO 527-1:1998 PN-EN ISO 527-2:1998 2450.00 2490.00 Compression strength, [MPa] PN-EN ISO 604:2006 63.70 64.20 Charpy impact strength, [kJ/m2] PN-EN ISO 179-1:2004 66.00 69.00 Barcola hardness, [°B] ASTM-D 2583-07 5.00 16.00 Ball indentation hardness, [MPa] PN-EN ISO 2039-1:2002 105.00 106.00 Martens deflection temperature, [°C] PN-90/C-89025:1990 43.00 47.00 HDT deflection temperature, [°C] 44.00 48.40 We accept payment by any of the following methods: Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement. We want you to be 100% delighted with your purchase and that's why we offer a 30-day, hassle free return period. If you require any help with your order, please don't hesitate to contact us. If you send an eBay message, you will get an answer back from us the same day, guaranteed! Returns Information If you are not happy with your item, then you are entitled to a full refund (including the original postage cost) if it is returned within 30 days. If you have simply changed your mind, then you have to cover return shipping costs (we suggest using a trackable method). However; if the item is damaged faulty or in any way not as described, then you will not be responsible for the return postage. Since your feedback is very important to our business, we genuinely invite you to leave positive feedback for us If you are satisfied with our service. If however you are not satisfied, could you please let us know before you leave neutral or negative feedback. We promise to try our best to resolve all problems. Good communication is always the way forward. OUR AIM IS 100% CUSTOMER SATISFACTIONCondition:New, MPN:216465, Brand:Epideco Deco + Deco
PicClick Insights for "
1kg Crystal Clear Epoxy Resin Very Low Viscosity UV Resistant Non Toxic