See Details on eBay Amazon Watch Contact

3m DP8805 Epoxy Adhesive Green 45ml Plastics and Metals, Low Odour Authorised 3M™ distributor, see our range

£19.49 Buy It Now 9d 4h, FREE Shipping, 14-Day Returns, eBay Money Back Guarantee

Seller: appdirect (9,046) 100%, Location: Weybridge, Surrey, Ships to: GB, Item: 301447178383 3M™ Scotch-Weld™ Low Odor Acrylic Adhesives are high performance, two-part acrylic adhesives with lower odor than most acrylic adhesives. These toughened products offer excellent shear, peel, and impact performance. They provide improved adhesion to many plastics and metals, including those with slightly oily surfaces. These durable products feature an exceptionally fast rate of strength build, providing structural strength in minutes. The Base of this product is off white with the activator being a blueish colour. Features Toughened Work life of approximately 4 or 10 minutes Excellent shear strength Structural strength in about 9 or 21 minutes High peel and impact strength Increased cure speed with applied heat 10:1 mix ratio Contain glass beads (0.010” diameter) to control bond line thickness Directions for Use 1. To obtain the highest strength structural bonds, paint, oxide films, oils, dust, mold release agents, and all other surface contaminants must be completely removed. The amount of surface preparation depends on the required bond strength and environmental aging resistance desired by user. For suggested surface preparations on common substrates, see the section on surface preparation. 2. Mixing For Duo-Pak Cartridges Store cartridges with cap end up to allow any air bubbles to rise towards the tip. To use, simply insert the cartridge into the EPX applicator and start the plunger into the cylinders using light pressure on the trigger. Then remove the cap and expel a small amount of adhesive to ensure material flows freely from both sides of cartridge. For automatic mixing, attach an EPX mixing nozzle to the cartridge and begin dispensing the adhesive. For hand mixing, expel the desired amount of adhesive and mix thoroughly. Mix approximately 15 seconds after obtaining a uniform color. 1. To obtain the highest strength structural bonds, paint, oxide films, oils, dust, mold release agents, and all other surface contaminants must be completely removed. The amount of surface preparation depends on the required bond strength and environmental aging resistance desired by user. For suggested surface preparations on common substrates, see the section on surface preparation. 2. Mixing For Duo-Pak Cartridges Store cartridges with cap end up to allow any air bubbles to rise towards the tip. To use, simply insert the cartridge into the EPX applicator and start the plunger into the cylinders using light pressure on the trigger. Then remove the cap and expel a small amount of adhesive to ensure material flows freely from both sides of cartridge. For automatic mixing, attach an EPX mixing nozzle to the cartridge and begin dispensing the adhesive. For hand mixing, expel the desired amount of adhesive and mix thoroughly. Mix approximately 15 seconds after obtaining a uniform color. 3. Apply adhesive and join surfaces within the open time listed for the specific product. Larger quantities and/or higher temperatures will reduce this working time. 4. Allow adhesive to cure at 60°F (16°C) or above until completely firm. Applying heat up to 150°F (66°C) will increase cure speed. 5. Keep parts from moving during cure. Apply contact pressure or fixture in place if necessary. Optimum bond line thickness ranges from 0.005 to 0.020 inch; shear strength will be maximized with thinner bond lines, while peel strength reaches a maximum with thicker bond lines. 6. Excess uncured adhesive can be cleaned up with ketone-type solvents.* *Note: When using solvents, extinguish all ignition sources, including pilot lights, and follow the manufacturer’s precautions and directions for use. Please note for this Adhesive you will require the EPX Manual Applicator, 10-1 plunger and Nozzle/s. 3m DP8805 Epoxy Adhesive Green 45ml Condition: New, Brand: 3M, Colour: Green, MPN: DP8805, Full cure time: 24 hours, UL Certification: QOQW2.MH17478

PicClick Insights PicClick Exclusive
  •  Popularity - 1,908 views, 1.4 views per day, 1,401 days on eBay. Super high amount of views. 4 sold, 50 available.
  •  Price -
  •  Seller - 9,046+ items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.
Similar Items