Lacquer material:
WATCH OUT!
H226 Flammable liquid and vapor.
H315 Causes skin irritation.
Harder:
WATCH OUT!
H226 Flammable liquid and vapor.
H317 can cause allergic skin reactions.
H319 Causes serious eye irritation.
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H335 May cause respiratory irritation.
H336 May cause drowsiness and dizziness.
EUH066 Repeated contact can lead to chapped or cracked skin.
Dilution:
WATCH OUT!
H226 Flammable liquid and vapor.
H315 Causes skin irritation.
H336 May cause drowsiness and dizziness.
You are bidding on a 5 liter set
2K car paint
GDR Olympic blue in shine
(2 components, single-layer paint)
Scope of delivery:
3 liter 2K car paint
GDR Olympic blue in shine
(UNI no metallic)
(VOC compliant <420g / l)
1.5 liters hardener
0.5 liter dilution
With this color no clear coat needed unless you want it.
Ideally suited for painting or painting / rolling vehicles, motorcycles, trucks and much more ...
This 2K car paint is very easy to apply, it dries quickly and its glossy surface has a high weather protection, as well as a high one Resistance and is scratch-resistant.
With this 2K car paint you are up to date, which makes you stand out in everyday life and becomes an eye-catcher.
as a gift for you
1 mixing beaker with scale 1: 1 - 5: 1
1 color sieve 190my
1 pair of gloves
Easy to process, low material consumption.
We guarantee absolutely new goods.
The surface should be grease and rust-free (sanded) to allow good adhesion.
processing
Sand the surface to be painted with the grit P500 orbital sander or P1000 to 1200 wet sandpaper and then degrease well (silicone remover).
When working on new or unpainted plastic surfaces, apply a plastic primer and note the drying time.
Then apply the filler or a primer (1.7 or 1.8mm nozzle size),
Processing temperature at least 20 ° C.
Sand the surface well with the appropriate grit from the wet sandpaper or smooth.
Then clean with silicone remover, the surface must be free of dust (recommended dust cloth) and grease.
Before the color is processed, the color must be checked (make spray samples).
Subsequent complaints are not possible.
No claim for compensation!
The 2K or basecoats should be processed with a 1.3 or 1.4 mm nozzle size with 2-3 spray passes and even pressure.
The temperature should be at least 20 ° C.
The 2K colors are approx. dry after 20-30 minutes. After 2 days the 2K lacquer is completely dry and completely hardened after 4 days.
If you are not satisfied with the gloss level or want to protect the paint, you can apply a 2K clear coat if you want.
For basic colors (ready to spray metallic or UNI), after approx. 20-30 minutes flash-off time (color dulls) with a 2K clear varnish.
You will of course also receive everything for the preparation and follow-up work for painting work and other great offers in our shop.
We are available for questions or information by phone or email.
Contact:
Looking for something and can not find it? For questions we are available Monday to Friday 8:00 a.m. to 8:00 p.m., contact us!
Bonus!
For each paint order, our customers receive a 3-piece starter set free of charge consisting of:
Checkout:
After winning the auction, at the latest after 2 hours, you will automatically receive an email from us with a link to our purchase process. Please refrain from requesting bank details from us! These will be communicated to you in the course of the purchase.
Some non-binding processing instructions:
Our primer recommendation:
We offer epoxy filler primer in our eBay shop. This creates rust protection and a filler structure at the same time. As a rule, these primers or fillers are gray. But that doesn't always fit. For example, you should use a white filler for red top coats so that the red tone gets a higher brilliance. Likewise, light-colored basecoats or varnishes with a high proportion of pearls often have a low opacity. A primer or the epoxy filler in the subsequent color is required there. Likewise, almost every new car is already pretreated on the line with a colored filler, which is cheaper even with small impacts, since the lower layer in the upper layer of paint is the same color. Likewise, a filler in body color reduces the amount of top coat required because it covers faster.
Our recommended coverage:
If partial painting is required, we recommend that you purchase a paint-adhering paint protection hood, which is available in the eBayshop. This wafer-thin hood resembling a folding garage is pulled over the vehicle and the part to be painted is cut out and taped. So the entire vehicle is quickly taped and protected from spray mist.
Painting of plastics:
Plastics that have already been painted can easily be painted after roughening. If the existing lacquer layer has been sanded off or the plastic is raw, an adhesive bridge must be sprayed. If the plastic is exposed to vibrations, the paint can tear. In this case 20-30% plasticizer can be added to the last layer of lacquer. In our eBay shop we offer you high quality products that guarantee you a good result with professional execution of the work.
For paintwork:
Blending is also known as "spot repair". Prime the area to be painted with small areas and fillers. Adjacent clearcoat areas are also sanded down. Paint the base coat in thin layers from the inside out so that the paint mist does not settle on the surface. Only apply basecoat from the outside to the inside during the last spray coat. Now the clear coat is sprayed over the painted area. Then add 50% thinner to the clear coat and spray the transition area. Finally, inject pure thinning over the entire area and the transition.
Plain paints in matt:
All uni lacquers (single-layer 2-component lacquers) are high-gloss. These are usually mixed 2: 1 with hardener + 15% thinner. You can also get all of these 2K plain paints here in MATT. This new trend usually has to be mixed 4: 1 with hardener + 50% thinner. The price usually stays the same.
Marke | Lackpoint |
EAN | Nicht zutreffend |
Farbcode | DDR Olympiablau |
Farbe | Blau |
Maßeinheit | L |
Lackart | Acryl Lack |
Komponentensystem | 2K |
Herstellernummer | Nicht zutreffend |
Anwendungsbereich | Lackieren & Ausbessern |
Anzahl der Einheiten | 5,0 |
Produktart | Set |