2/3/4 Axis DITRON DRO Digital Readout Display Slim Magnetic Scale 5um/1um Mill

• Rated to lP67 protection class.
• Automatic gain control technics,reduced the requirement for installation.The gap between the reader and tape can be 3mm.
• Protection of the anti-pole of the power and wrong wire connection(voltage <5.5V).
• High Speed,can reach 150 Meters/Minute for the resolution of 5 micron.
• Clear indication LED light(Red&Green),easy for installation and adjustment.

DRO Technical Parameter:

●Voltage Range:AC80V-260V/50HZ-60HZ

●Power Dissipation:15W

●Working Temperature:-10C°60C°

●Coordinate Display:2,3,4,5Axis

●Operating Keypad: Mechanical Keypad

●Resolution:0.1um,0.2um,0.5um,1um,2um,2.5um,5um,10um,50um

DRO Features:

1. 7’true color LCD screen,easy to recognizing.

2. Saving the drawing function,the DRO allows to save the drawings into the system which makes the machining to be much more convenient.

3. Special previewing the drawing function,after setting well the parameters,the DRO will display the machined well effect which makes the operating be more visual.

4. Displaying the tool’ s current position function,during the machining,the system will display the tool’ s current position according to the drawing which makes the machining be much more easier.

5. Help function,during the machining,if there is any doubt,pressing the help button will help you to solve.

6. Custom settings for the shortcut keys,operator canset the shortcut keys according to his operatinghabit.

DRO Basic Function:

1) Zeroing 2) 200 sets of SDM Coordinate 3) Input Coordinate 4) Ref Ruler Storage Function 5) Display in Metric / INCH 6) Calculator 7) Power Off Memory Function 8) Non-linear Compensation 9) Encoder Selection 10) 1/2 Function 11) Linear Compensation 12) Rotational Speed Measurement(Customized Cost extra) 13) Counting Direction Selection 14) ABS/INC Coordinate 15) RS232 (customized,cost extra) 16) Data Recovery

D80-3 Axis Details Shows: