Seller: torques_uk✉️(121,938)99.9%,
Location:Abergavenny, Monmouthshire, GB,
Ships to: WORLDWIDE,
Item:150925644518Torques AN -8 (JIC -8 ORB-8) EFI Adjustable Fuel Pressure Regulator 30-70 PSI. Torques AN -8 (JIC -8 ORB-8) EFI Adjustable Fuel Pressure Regulator 30-70 PSI
• Base pressure adjustable from 30-70 PSI. • Gasoline and alcohol compatible. • Fuel pressure rises on a 1:1 ratio with boost. • 1/8” NPT gauge port. Boost / Vacuum Port (1/8" NPT threaded) • 2 x ORB-8 inlet ports and 1 x ORB-6 return port. Female ORB-8 (AN-8) threads to be sealed with an O Ring adapter ORB-8 = AN-8 3/4" UNF O ring Boss/Adapter Female ORB-8 (AN-8) Plug ( Needed when only one fuel supply is used) to be sealed with an O Ring Port Plug adapter ORB-8 = AN -8 (AN8 AN 08) Hex Head Port Plug with O ring Female return port ORB-6 (AN-6) threads to be sealed with an O Ring adapter ORB-6 = AN-6 9/16" UNF O ring Boss/Adapter A fuel pressure regulator designed to suit modified and motorsport engines. These units operate with the typical fuel enrichment as found on normal fuel pressure regulators. The benefit of these valves is that they are "adjustable" and the fuel pressure (at the injector) may be altered to suit the engine requirements.
Designed to stand up to the destructive properties of alcohol based fuels, including ethanol and methanol.
Bright dip Red/Blue anodized finish for a corrosion resist a nt, show car quality appearance.
Max Pressure 10 BAR
Inline fitment
Boost / Vacuum port
Boost / Vacuum rise ratio 1:1
Rebuildable
Top adjustment for excellent
ease of use
Comes with a mounting bracket and fasteners (As shown in the photo)
Front 1/8" NPT gauge port.
To use this regulator in your vehicle’s fuel system, you must install the necessary adapter fittings and o-rings, high pressure fuel lines and/or fuel injector rails to adapt your system to the configuration and ports of this regulator. Each regulator has one 1/8" NPT gauge port. This port requires thread sealant to seal.
Brand: Torques Type: Fuel pressure regulator Item SKU code: TQFPR-8 Hose End Size: AN-8 / AN-6 Adapter Size: ORB-6 (1/8 NPT gauge point and Vacuum port) Adapter Attachment required: AN-8 / AN-6 Male threads
Quantity: Sold individually.
Item SKU code: TQFPR-8
There is a Maximum postage charge of £8.00 on any combined order for U.K based eBay members