Welcome to the Patkor store auction
In this auction we offer:
Price for 1 piece!!
We offer you a spectrum analyzer produced by the Japanese company Anritsu
The device is type MS2601
The analyzer's operating range is from 9kHz to 2.2GHz
The offered analyzer is equipped with full frequency synthesis and extensive measurement capabilities.
It enables measurements with a resolution of 30 Hz and a width of the observed spectrum of 100 Hz per plot
It is also equipped with an auto-calibration function and markers with a resolution of 1 Hz
The internal frequency standard has a stability of 5x10 to -8
Thanks to the digital memory, the device works brilliantly with very slow tuning times, which allows measurements of noise and frequencies close to the carrier frequency.
Such measurements are made much easier by a set of video filters. which starts at 1Hz in this device
NOTE: the analyzer is in the K option, i.e. the signal input has an impedance of 75Ω
The impedance difference causes a slight input mismatch and an amplitude measurement error of 0.7 dB
It practically does not interfere with measurements. you can set the offset so that the readings on the screen match 100%
It is also possible to install a 50-75Ω broadband transformer, but this does not make sense because we lose about 2dB per transformer.
The device is adapted to field measurements and has the ability to enter a table of amplitude corrections, which is taken into account during measurements.
The analyzer has two intermediate frequency outputs: 3.6MHz and 50MHz
The 3.6MHz output is perfect for connecting a shortwave receiver.
In SWEEP mode 0, the analyzer works as a tuned high-frequency tuner.
TECHNICAL DATA:
Operating frequency range 9kHz -2.2GHz
Range of the observed sweep spectrum from 1kHz to full band, quantization 1-2-5.
Possible operation with 0Hz sweep, the device works as a measuring receiver
Resolution (pcz filters) from 30Hz to 1MHz quantization 1-3
Frequency standard 10MHz stability 5x10 to -8
Dynamics from -124dBm to +120dBm
Amplitude unevenness:
- 0.5dB from 100kHz to 1.5GHz
- 1.5dB from 9kHz to 2.2GHz
Self-noise level better than -114dBm
Built-in markers, amplitude and frequency measurement.
Video signal output.
HPIB interface.
Autocalibration.
Power supply 230V 50Hz
Dimensions 29x18x45 cm
The offered analyzer is in very good technical condition, has been tested and passes all self-tests and auto-calibrations.
Due to eBay sales limits
We do not show the full stock quantity in our offers.
Do you want to buy more pieces?
Write to us .
We will prepare an individual offer on eBay with one shipping cost.
Important information!
Please make sure you read the following to avoid any misunderstanding when purchasing and shipping.
Invoice
We issue invoices (Information for companies registered in the European Union with an EU VAT number, we issue a 0% VAT invoice, the auction price does not include VAT)
Shipment
We ship from Poland. We ship worldwide. We offer standard shipping for this auction. If express delivery is required, please write to us. If you want cheaper shipping - write to us. If your country is not on the shipping list - write to us and we will quote shipping for you. Due to the international transaction, the arrival time of the parcel depends on weather conditions, pandemic, customs policy, holidays, etc. If you have any other questions, please write to us.
Returns
We accept returns in accordance with eBay's regulations. If you are not satisfied with the product - write to us.
PLEASE VISIT OUR OTHER AUCTIONS