V308 Ultrasonic Injector Cleaning Machine is a fuel injector cleaning machine newly developed by MRCARTOOL. It combines ultrasonic cleaning technology and microcomputer oil pressure closed-loop control cleaning and detection technology. This product simulates various engine working conditions and cleans and inspects various automobiles and motorcycle fuel injectors. Its unique design saves weight and volume, while further optimizing the product's functionality. With a larger cleaning tank and cleaning fluid heating effect, which can achieve better cleaning results. Function Explanation: 🏆2.Injector Testing ➤ 1. [Ultrasonic Cleaning with Heating the Fluid]: Different from others, MRCARTOOL V308 is able to heat the cleaning fluid, which can improve a lot on cleaning effect. With that advantage, ultrasonic cleaning can be more powerful to remove the attachments and internal blockages on the injectors. ➤ 2. [9 Kinds of Fuel Injector Tests]: MRCARTOOL V308 Fuel injector Cleaner is capable of various testing, including 2-idle speed test, 3-medium speed test, 4-high speed test, 5-accelerating test, 6-variable speed test, 7-leakage test, 8-idle spray test, 9-medium spray test, 10-high spray volume test. ➤ 3. [ Compact/Lightweight/Portable]:MRCARTOOL V308 Fuel injector Cleaner only weighs 8KG, allowing to carry around. With 1300ML large capacity ultra cleaning tank, all injectors can be cleaned at one time, which save much time and more efficient. ➤ 4. [Efficient & Labor-free]: 4 injectors can be tested and cleaned at one time. Support reverse cleaning & on-vehicle cleaning. Plus, it can also be used on 6 cylinders, twice tests will do. ➤ 5. [Two Years Warranty, Lifetime Maintenance]: For damage caused by non-human factors, MRCARTOOL promises to resend parts for free within 2 years. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours. |
Ultrasonic Cleaning V308 is equiped with ultrasonic cleaning technology hich can eliminate blockages thoroughly,it can clean 4 injectors at the same time. | Heating The Cleaning Fluid V308 is able to heat the cleaning fluid in the cleaning tank, which can improve the cleaning effect on injectors. | Recovery Cleaning Fluid Used cleaning fluid &testing fluid can be easily recovered. |
Support Cars and Motorcycles V308 supports cars and motorcycles. It will come with 6pcs motorcycle adapters which fit for HONDA YAMAHA SUZUKI SANYANG. |
Ultrasonic Cleaning | Fuel Injector Testing | ||
1.Pour in the detergent and place the fuel injector in the ultrasonic cleaner. | 2.Connect the pulse signal wire & se lect the ultrasonic cle aning function to start working. | 1.Pour in the test liquid, install the fuel injector to the fuel distributor and fix it to the main unit by bolts. | 2.Test if the fuel injector is leaking or blocked under different functions. |
About the cleaning liquid and testing liquid: 1.What liquid I can use for the checking ? Test liquid:Inedible alcohol. 2. What liquid for the cleaning mode of this machine? Special injector cleaning liquid,such as 3M injector cleaning liquid. |
Technical parameters: Working environment: Power supply: AC220V±10% Frequency: 50HZ±0.5 Relative humidity: <85% Environment temperature: 0℃~+40℃ External magnetic field strength: <400A/m (No open flames are allowed around.) Technical parameters: Tank capacity:1300 ml Range of rotation:0-7500r/min PWM pulse width:0~20.0ms step 0.1ms Time:0~20min Cleaning frequency:40 kHz Cylinder volume:100 ml Injection times:0~9900 times, step 100ms System pressure:0~0.6Mpa Ultrasonic cleaning power:70W Package dimensions:340*295*360mm | Package include: 1 x V308 Fuel Injector Cleaner 3 x Plugs 1 x Signal Wire 4 x Adapter Cables 1 x Oil Rail 1 pair Lock Pole & Nut 1 x Ultrasonic Cleaning Stand 1 x Funnel 1 x Testing Pad 2 x Oil Drain Valves 4 x Extended Plugs 4 x Car Top Oil Inlet Connectors (10.6, 13.4 mm) 12 x Moto Top Oil Inlet Connectors (10, 10.6, 11 mm) |