2 Pack Red Head 3/8 in. Small Masonry Anchor Lag Shields #35740
£4.75 Buy It Now or Best Offer
Red Head 1/2 in. Large Masonry Anchor Lag Shields #35770
£4.75 Buy It Now or Best Offer
Red Head 1/4 in. Large Masonry Anchor Lag Shields #35710
£4.75 Buy It Now or Best Offer
5 Count Red Head 1/4 in. Small Masonry Anchor Lag Shields #35700
£3.80 Buy It Now or Best Offer
2 packs of 4 Count Red Head 5/16 in. Small Masonry Anchor Lag Shields #35720
£5.70 Buy It Now or Best Offer
2 Pack Red Head 3/8 in. Large Masonry Anchor Lag Shields #35750
£4.75 Buy It Now or Best Offer
2 packs of 2 Count Red Head 1/2 in. Small Masonry Anchor Lag Shields #35760
£5.70 Buy It Now or Best Offer
Metal Lag Bolt Screw Molly Anchor Short Shield Casings Loose Hardware Parts 44mm
£8.07 Buy It Now
Lag Anchors 5/16 X 1 3/4” Concrete
£7.91 0 Bids or Buy It Now 3d 11h
M16 Hilti Drop In Anchor Setting Tool-HSD-G M16 5/8"X65 #243744
£36.99 Buy It Now or Best Offer
DIEDA Ankle Robust Wfaz / A4 4 Parts for System Balustrade Ref. : 250433 New
£20.98 Buy It Now
50pc 3/8" Short Size Lag-Shield Anchor 5/8" Drill Size FASTENAL NEW Sealed Box
£42.70 Buy It Now or Best Offer
5 ...1/2" x 3" Lag Screw Shield Short Zinc Alloy
£3.96 0 Bids or Buy It Now 5d 13h
Hillman 370187 Lag Shield Anchors (1/4" Long), 2 Pack
£10.36 Buy It Now
Hillman 370190 Lag Shield Anchors (5/16" Long), 2 Pack
£10.36 Buy It Now
Box Of 50 ~ LAG SHIELD 5/16" X 1 1/4"
£5.70 Buy It Now
Masonry anchors mixed lot of various sizes, new open packages, free shipping
£15.82 0 Bids 5d 13h
20 psc 1/4" x 1 1/4" Star 1/4 Loxin Anchors 1/2" hole
£17.93 Buy It Now
24 - 1/4" x 1 1/4" Star 1/4 Loxin Anchors 1/2" hole
£15.20 Buy It Now
3/8" Dia Lag Shield Anchor, 2 1/2" Long (5/8" Hole Size). Package of 15.
£12.25 Buy It Now or Best Offer
Tassel Anchor Passer Fbn II Steel 16/25 " Ø 16 X 145 MM for Any Type
£22.84 Buy It Now
FBN II Steel 16/25" Ø 16 x 145 mm Through Anchor Piece for Each Type
£9.47 Buy It Now
10 Hillman Lag Shields 5/8" Short For Concrete, Brick, and Block 370217
£9.49 Buy It Now or Best Offer
Lot Of 10 Everbilt 1/4 in x 1-1/2 in. Masonry Anchor Long Lag Shields 20Pk (200)
£101.56 Buy It Now or Best Offer
Hardware Essentials 321156 Fg Eye Lag Bolt 3/8X5-1/2 Steel Zinc-Plated
£11.43 Buy It Now
Elematic Package 100 Dowels Bluefix/VA 6x35 MM Anchor Bimateria with Screw
£40.64 Buy It Now
Elematic Bluefix/VA Dowels Anchor Bimateria Ø 6x35 Screw Head Flat 250 Pieces
£76.04 Buy It Now
Tecfi 100 Dowels Nylon Sustained MM 10x80 With Six Wings Screw Tps A Wood
£89.46 Buy It Now
Elematic 100 Piece Bluefix/Va 6x35mm Twin Anchor with Screws
£22.50 Buy It Now
1/4" x 1" Lag Shield Anchor Short 1/2" Drill Hole Concrete Brick Masonry Qty: 10
£10.45 Buy It Now
10x JCP M10 Loose Bolt (Suitable For Concrete And Most Masonry 110mm Bolt
£12.50 0 Bids or Best Offer 3h 17m
10x JCP M10 Loose Bolt (Suitable For Concrete And Most Masonry 130mm Bolt
£12.50 0 Bids or Best Offer 3h 20m
Elematic Bluefix/Go Anchor Pieces Twin Piece Ø 6x35 Flathead Screws 250pcs
£45.77 Buy It Now
Everbilt 3/8 in. x 2-1/2 in. Zinc-Alloy Short Lag Shield 803612
£18.99 Buy It Now
Pack o0f (15) Everbilt 1/2 in. x 2 in. Zinc-Alloy Steel Short Lag Shield 817351
£15.20 Buy It Now
Package 100 Rivets Aluminium Ø 4x13 MM Biker Steel Galvanized Head Loose
£21.22 Buy It Now
Tecfi 100 Dowels Nylon Sustained 8x100 Six Wings for Concrete Brick
£73.24 Buy It Now
Elematic Dowels With Border 10 Pieces IN Polyamide 6 Ø 8 X 40 MM With Screws
£18.16 Buy It Now
Elematic Dowels Impact Loads 10 Pieces IN Polyamide 6 Ø 5 X 25 MM With Screws
£17.28 Buy It Now
Package 100 Rivets Body IN Aluminium Ø 4, 8x16 MM Biker Steel Galvanized
£22.04 Buy It Now
Package 100 Rivets Body IN Aluminium Ø 3, 4x11 MM Biker Steel Galvanized
£19.56 Buy It Now
Elematic Dowels With Border 10 Pieces IN Polyamide 6 Ø 10 For 50 MM With Screws
£20.17 Buy It Now
Tecfì 200 Dowels Ø 10x150 Hdpe for Coats With Biker Nylon Reinforced
£101.68 Buy It Now
Elematic Dowels Impact Loads 10 Pieces IN Polyamide 6 Ø 8 X 40 MM With Screws
£18.54 Buy It Now
Elematic Dowels Impact Loads 10 Pieces IN Polyamide 6 Ø 6x30 MM With Screws
£17.59 Buy It Now
Package 100 Rivets Body IN Aluminium Painted Head Of Dark Ø 4x10 MM
£23.17 Buy It Now
Package 100 Rivets Body IN Aluminium Painted Head Of Dark Ø 3, 4x9 MM
£19.31 Buy It Now
Package 100 Rivets Body IN Aluminium Ø 3x10 MM and Stud Steel Galvanized
£19.24 Buy It Now
Elematic Dowels T-Click for Plasterboard 100 Pieces Polyamide 6 Ø 8x30 MM Screws
£60.88 Buy It Now
Fischer Dowels Fid-V M8 2 Fid 90 +2 Screws Torx + 2 Ros for Fixing Tubes Rain
£109.06 Buy It Now
Elematic Dowels With Border 10 Pieces IN Polyamide 6 Ø 6 For 30 MM With Screws
£17.51 Buy It Now
Tecfì 100 Dowels Ø 10x210 IN Hdpe for Coats With Biker Nylon Reinforced
£107.46 Buy It Now
Tecfi 100 Dowels Nylon Lengthened Package 8x120 with Screw To Tps Sustained
£68.82 Buy It Now
Tecfi 50 Dowels Nylon Sustained MM 10x100 Six Wings Screw for Concrete
£55.80 Buy It Now
Tecfì 200 Dowels Ø 10x110 IN Hdpe for Coats With Biker Nylon Reinforced
£93.61 Buy It Now
Package 100 Rivets Body IN Aluminium Ø 4, 8x10 MM Biker Steel Galvanized
£20.12 Buy It Now
Tecfi 100 Dowels Nylon Sustained 8x80 With Six Wings Screw Tps A Wood Impr
£63.71 Buy It Now
8 pkgs Blue Hawk Lag Shields 2 anchors 5/16" & 2 screws 5/16" x 1-3/4" per/pkg
£14.13 Buy It Now or Best Offer
12 pkgs Blue Hawk Lag Shields 2 anchors 3/8" 2 screws 3/8" x 2-1/4" for Masonry
£28.45 Buy It Now
3/8" bolt - 5/8” hole, Lag Shields Long, Anchor Zinc Alloy, box of 50
£33.25 Buy It Now
3/8" bolt - 5/8” hole, SingleExpansion Shield Anchor Zinc Alloy, box of 50
£33.25 Buy It Now
Stazin Star IS25L 3/8 LAG 5/8 Hole Shield Anchor, box of 50
£28.50 Buy It Now
3 watchersHilti Drop-In Anchor Setting Tool Hsd-G M10 3/8" X 40 #243742 Made In Germany
£50.00 Buy It Now
20ct Everbilt Masonry Medium Duty 1/4 In X 1-1/2 Inch Lag Shields, Bulk Pk Of 5
£14.24 Buy It Now or Best Offer
Vintage Bulldog Home Hardware Advertising Box 1/4” LAG SHIELDS Memphis, TN
£6.60 Buy It Now
Elematic T-click plasterboard tiles 100 pcs polyamide 6 Ø 8x30 mm with screws
£36.30 Buy It Now
Elematic 10-piece polyamide 6 Ø 8 x 40 mm multi-directional pieces with screws
£7.42 Buy It Now
Elematic 10-piece polyamide 6 Ø 6x30 mm multi-directional pieces with screws
£6.77 Buy It Now
Elematic 10-piece polyamide 6 Ø 5 x 25 mm multi-directional pieces with screws
£6.56 Buy It Now
Elematic 10 piece polyamide 6 Ø 8 x 40 mm edge tiles with screws
£7.15 Buy It Now
Elematic 10 piece polyamide 6 Ø 6 x 30 mm edge tiles with screws
£6.72 Buy It Now
Elematic 10 piece polyamide 6 Ø 10 x 50 mm edge tiles with screws
£8.54 Buy It Now
Open Box Lot of 43 Short Lag Shield Zinc 3/8" x 1 3/4"
£9.49 Buy It Now or Best Offer
M6 Drop In Masonry Concrete Anchor Lipped Zinc£2.63 Buy It Now
Pack of 100 rivets aluminum body painted moorhead Ø 4x10 mm
£10.58 Buy It Now
Pack of 100 rivets aluminum body painted moorhead Ø 3.4x9 mm
£7.94 Buy It Now
Pack of 100 rivets aluminum body Ø 4.8x16 mm galvanized steel nail
£9.81 Buy It Now
1 watcherPack of 100 rivets aluminum body Ø 4.8x10 mm galvanized steel nail
£8.50 Buy It Now
Pack of 100 rivets aluminum body Ø 3.4x11 mm galvanized steel nail
£8.12 Buy It Now
Pack of 100 rivets aluminum body Ø 3x10 mm and galvanized steel nail
£7.90 Buy It Now
Pack of 100 aluminum rivets Ø 4x13 mm galvanized steel nail wide head
£9.25 Buy It Now
M6 M8 M10 M12 Eye Bolt Masonry Shield Anchor Zinc£5.42 Buy It Now
STEEL PIECE W/SCREW mm. 8x35 pcs 200
£40.16 Buy It Now
1/2" x 3" Lag Shield
£23.75 Buy It Now
3/8" x 1 3/4" Lag Shield
£47.49 Buy It Now
5/8" x 2" Lag Shield
£23.75 Buy It Now
1/2 in x 2 in. Masonry Anchor Lag Shields (9-Pack) by Tap-Pro Open Box Zinc
£2.37£1.65 Buy It Now or Best Offer
3/8" Lag Shield Anchor Long, 50pcs
£47.49 Buy It Now or Best Offer
Lot Of 18 Stazin Star Lag Shields 1820S 1/2" Hole 5/16 Lag 1.25" Shaft New
£8.54 Buy It Now or Best Offer
Lot Of 40 Stazin Star Lag Shields 1820S 1/2" Hole 5/16 Lag 1.25" Shaft New
£16.14£8.07 Buy It Now or Best Offer
Box of 10 Stazin Lag Shields 1/2 Short for Concrete and Masonry New
£8.44 Buy It Now
Tecfi 100 8x80 Extended Nylon Pieces with Six Screw Fins TPS Wood impr
£34.62 Buy It Now
Tecfi 100 8x120 Extended Nylon Pieces with TPS Screws Extended Piece
£38.10 Buy It Now
Tecfi 100 Tiles Extended Nylon mm 10x80 with Six Screw Fins Wooden Tps
£52.19 Buy It Now
Tecfi 100 Pile Extended Nylon 8x100 Six Fins for Brick Concrete
£41.12 Buy It Now
Tecfi 50 Piece Extended Nylonmm 10x100 Six Fin Concrete Screw
£29.22 Buy It Now
Single expansion anchor's 3/8 Bolt 5/8 Hole Pkg of 20
£17.10 Buy It Now or Best Offer
(8) 3/4" x 2 1/2" Sleeve Anchors
£9.50 Buy It Now or Best Offer
(4) 1/2" x 4 1/2" Wedge Anchors With Hardware, Zinc
£7.60 Buy It Now or Best Offer
(4) 1/2" x 4 1/4" Stainless Steel Wedge Anchors With Hardware
£7.60 Buy It Now or Best Offer
- (14) 3/8" x 2 1/4" Sleeve Anchors - (14) 3/8" x 2 1/4" L Sleeve Anchors.
- (17) 1/4" x 1 1/2" Lag Shields
- (25) 1/4" x 1" Short Lag Shields
- (15) 1/2" x 2" Lag Shields
- (10) 1/2" x 3" Long Lag Shields
- (60) 3/8" x 2 1/2" Long Lag Shields
- (60) 3/8 in. x 1-3/4 in. Short Lag Shields - Short Lag Shields.
- Diamond Box Of 25 1/2" Short 2" Lag Shield Anchor Zinc Alloy 3/4" Drill - The Lag Shield is a screw style anchor designed for use with lag bolts. It is suitable for use in concrete and the mortar joints of block or brick walls. The long style version is used in soft or weak masonry to better develop strength.
- Everbilt 5/16 in x 1-1/4 in. Zinc-Alloy Long Lag Shields (15-Pack) 817331 - Everbilt 5/16 in x 1-1/4 in. These lag or expansion shields are used for fastening lag screws into fastening into wood and concrete. The expansion shield acts as an anchoring point into a concrete slab or foundation, expanding when the screw threads are engaged during installation.
- Everbilt 1/4 in x 1-1/2 in. Masonry Anchor Lag Shields (15-Pack) 817371 615943 - These lag or expansion shields are used for fastening lag screws into fastening into wood and concrete. The expansion shield acts as an anchoring point into a concrete slab or foundation, expanding when the screw threads are engaged during installation.
- Everbilt 3/8 in x 2-1/2 in. Masonry Anchor Lag Shields (5-Pack) 817391 617180 - These lag or expansion shields are used for fastening lag screws into fastening into wood and concrete. The expansion shield acts as an anchoring point into a concrete slab or foundation, expanding when the screw threads are engaged during installation.
- Everbilt 5/16 in x 1-3/4 in. Zinc-Alloy Long Lag Shields (10-Pack) 817381 615994 - These lag or expansion shields are used for fastening lag screws into fastening into wood and concrete. The expansion shield acts as an anchoring point into a concrete slab or foundation, expanding when the screw threads are engaged during installation.
- Everbilt 1/4 in x 1 in. Masonry Anchor Long Lag Shields (15-Pack) 817321 - Lag shields are screw style anchors with 2 semi-circular, hollow, sections that are interlocked at the top. Use in conjunction with hex lag screws. When installed, the shield expands from the bottom.
- Everbilt 5/16 in x 1-1/4 in. Zinc-Alloy Long Lag Shields (15-Pack) 817331 - Everbilt 5/16 in x 1-1/4 in. These lag or expansion shields are used for fastening lag screws into fastening into wood and concrete. The expansion shield acts as an anchoring point into a concrete slab or foundation, expanding when the screw threads are engaged during installation.
- Everbilt 1/2 in x 3 in. Masonry Anchor Lag Shields (5-Pack) 817401 - Everbilt 1/2 in x 3 in. Crown Bolt's lag shields are screw style Anchor with 2 semi-circular, hollow, sections that are interlocked at the top. Use in conjunction with hex lag Screw. When installed, the shield expands from the bottom.
- Everbilt 1/4 in x 1-1/2 in. Masonry Anchor Long Lag Shields (20-Pack) 803622 - These lag or expansion shields are used for fastening lag screws into fastening into wood and concrete. The expansion shield acts as an anchoring point into a concrete slab or foundation, expanding when the screw threads are engaged during installation.
- Everbilt 5/16 in x 1-3/4 in. Zinc-Alloy Long Lag Shields (20-Pack) 803632 - Everbilt 5/16 in x 1-3/4 in. These lag or expansion shields are used for fastening lag screws into fastening into wood and concrete. The expansion shield acts as an anchoring point into a concrete slab or foundation, expanding when the screw threads are engaged during installation.
- Everbilt 1/2 in x 2 in. Masonry Anchor Short Lag Shields (10-Pack) 803642 - Everbilt 1/2 in x 2 in. These lag or expansion shields are used for fastening lag screws into fastening into wood and concrete. The expansion shield acts as an anchoring point into a concrete slab or foundation, expanding when the screw threads are engaged during installation.
- Anchor TEB-LS126-9 Long Lag 1/2 x 3 Shields & 1/2 x 5-1/2 Lag bolts (Pack of 9) - New Anchor TEB-LS126-9 Long Lag Shields. - 1/2 x 5-1/2 Lag bolts and washers. - for 3/4 Hole x 1/2 Lag.
- Anchor 232-3594 Long Lag Shields 1/4 x 1-1/2 (Pack of 20) for 1/2 Hole x 1/4 Lag - New Anchor 232-3594 Long Lag Shields 1/4 x 1-1/2. - for 1/2 Hole x 1/4 Lag.
- BULK Lag Shields / Lag Bolt Anchors - 1/4" x 1" - qty 1100 + FAST FREE SHIPPING - OVER 1100 lag shields. that's less than 12 cents each!
- (Qty 50) 5/16" x 1-3/4" Lag Shield Anchor Long Zinc Alloy 1/2" Hole - (Qty 25) 5/16" x 1-3/4" Lag Shield Anchor Long Zinc Alloy 1/2" Hole.
- (Qty 25) 5/16" x 1-3/4" Lag Shield Anchor Long Zinc Alloy 1/2" Hole - (Qty 25) 5/16" x 1-3/4" Lag Shield Anchor Long Zinc Alloy 1/2" Hole.
- 1/4" Long Size Lag-Shield Anchor 1/2" Drill Size 50ct Fastenal 51212 1-1/2" long - 1/4" Long Size Lag-Shield Anchor 1/2" Drill Size 50ct Fastenal 51212 1-1/2" long.
- 1x m6 m8 70mm Masonry Socket Anchor Ankerbolt Screw Zinc JCP Anker Bolt - The Ankerbolt Socket Bolt is a self tapping anchor for use in a variety of base materials. Ready for M8 threaded rod. The undercutting action provides a positive anchorage with no expansion forces.
- Diamond Box Of 50 3/8" Short 2" Lag Shield Anchor Zinc Alloy 5/8" Drill Hole - The Lag Shield is a screw style anchor designed for use with lag bolts. It is suitable for use in concrete and the mortar joints of block or brick walls. The long style version is used in soft or weak masonry to better develop strength.
- (Qty 25) 3/8" x 1-3/4" Lag Screw Shield Anchor Short Zinc Alloy 5/8" Hole - Dust / Rub Marks From Storage. Best Deal. Defects: Item May Have Minor.
- Everbilt 3/8 in x 1-3/4 in. Masonry Anchor Zinc-Alloy Lag Shields (15-Pack) - Masonry Anchor Zinc-Alloy Lag Shields. Concrete Shear: 350 lbs. Concrete Pullout: 225 lbs.
- M8 M10 M12 M16 Drop In Masonry Anchor Zinc ETA Approved - ETA/ C.E Approved Drop In Masonry Anchor Applications: Light to heavy-duty into solid concrete. Clear the hole of all debris with a brush and blow out pump. Push the anchor into the hole until it is flush with the surface of the concrete.
- 4x Heavy Duty Anchor Bolt Steel Anchor Wedge Anchor Galvanized Concrete Dowel Stone M10 - Ankerbolzen der Marke Domax Bestens geeignet für die Befestigung von Metallkonstruktionen, Maschinen, Holzunterkonstruktionen etc. in festen Baustoffen Für die Befestigung von mittleren bis schweren Lasten in Stein und Beton. Durch Anziehen der Mutter dehnt sich das Ende des Ankerbolzen aus, wodurch fester Halt gewährleistet wird. Aus hochwertigem und verzinkten Stahl. Erhältlich in den Größen: 4x M10 70 mm Länge 4x M10 90 mm Länge 4x M10 120 mm Länge 4x M10 150 mm Länge.
- The Hillman Group 370197 Mini Lag Shield, 1/2-Inch Short, 10-Pack - Requires 3/4" bit. Takes 1/2" screw. Use in mortar & concrete. From the Manufacturer Provides secure anchorage of lag screws in concrete and the mortar joints of block and brick. Four way expansion insures a tight grip and prevents over expansion.
- Ankerbolt Pan Head M8/10 x 60. Zinc Plated. Quantity 94. - Ankerbolt Pan Head M8/10 x 60. Zinc Plated. Quantity 94..
- Blue Hawk 25-Pack 1/4-in Short Lag Shields #0359932 - Blue Hawk 25-Pack 1/4-in Short Lag Shields #0359932.
- Masonry Concrete Stone Door Window Frame Screw Plus Cap Countersunk ZYP - Features & benefits Virtually stress free fixing, allowing close to edge applications. Through-fixing, eliminating the need for marking and re-positioning. High load capacity with interlocking thread into the base material.
- Fischer FID-V M8 2 FID 90+2 TORX SCREWS + 2 ROS for fixing rain tubes - Lunghezza ancorante: 90 mm. - Profondità di ancoraggio: 90 mm. possesso per superare l'empasse. Condizioni e Privacy.
- M6 M8 M10 M12 M16 M20 Drop In Anchor Setting Tool Zinc - M6 M8 M10 M12 M16 M20 Drop In Anchor Setting Tool Zinc M6, M8, M10, M12. This will force the masonry anchor's, nut downwards, expand the sides and create a secure hold from the bottom of the hole. Drop In Anchor, Setting Tool - Sizes Available 6mm Drop In Anchor Setting Punch.
- (Qty 10) 1/4" x 1-1/2" Lag Shield Anchor Long Zinc Alloy 1/2" Hole - (Qty 10) 1/4" x 1-1/2" Lag Shield Anchor Long Zinc Alloy 1/2" Hole. New, as pictured Stocking # Gr1
- Cobra ~ 2-Pack , 2x 1/4" S Lag Screw Shields 1-1/4" long - Cobra ~ 2-Pack , 2x 1/4" S Lag Screw Shields 1-1/4" long.
- Cobra ~ (252S) 2 x 1/4"L Lag Screw Shields, 350 lbs. Load, 2 pk. - Cobra ~ (252S) 2 x 1/4"L Lag Screw Shields, 350 lbs. Load, 2 pk.. SHIP'S NEXT DAY IF NOT THE SAME DAY .
- Everbilt 5/16 in x 1-1/4 in. Zinc-Alloy Long Lag Shields (25-Pack) 803592 - Everbilt 5/16 in x 1-1/4 in. These lag or expansion shields are used for fastening lag screws into fastening into wood and concrete. The expansion shield acts as an anchoring point into a concrete slab or foundation, expanding when the screw threads are engaged during installation.
- Hillman 3/8” Short Lag Shield 49pcs 370210 3/8” Drill 5/8 Solid Walls - Hillman 3/8” Short Lag Shield 49pcs 370210 3/8” Drill 5/8. New in open boxLoc-F
- Everbilt 3/8 in x 1-3/4 in. Zinc-Alloy Short Lag Shields (15-Pack) 803602 - Everbilt 3/8 in x 1-3/4 in. These lag or expansion shields are used for fastening lag screws into fastening into wood and concrete. The expansion shield acts as an anchoring point into a concrete slab or foundation, expanding when the screw threads are engaged during installation.
- Tecfì 200 pieces Ø 10x110 in HDPE for coats with reinforced nylon nail - Materiale: Polietilene alta densità (HDPE). possesso per superare l'empasse. In scadenza. Pertanto, ci riserviamo la facoltà di modificare/adeguare le informazioni tecniche dei prodotti del catalogo, anche senza preavviso alcuno.
- Tecfì 200 pieces Ø 10x150 HDPE for coats with reinforced nylon nail - Materiale: Polietilene alta densità (HDPE). possesso per superare l'empasse. In scadenza. Pertanto, ci riserviamo la facoltà di modificare/adeguare le informazioni tecniche dei prodotti del catalogo, anche senza preavviso alcuno.
- NOS 3 Boxes of 50, Total of 150 Power Fasteners Lag Shield 01205, 1/2" x 3" - Resolution to the issue.
- Tecfì 100 pieces Ø 10x210 in HDPE for coats with reinforced nylon nail - Materiale: Polietilene alta densità (HDPE). possesso per superare l'empasse. In scadenza. Pertanto, ci riserviamo la facoltà di modificare/adeguare le informazioni tecniche dei prodotti del catalogo, anche senza preavviso alcuno.
- 3/8in-3/4"in Highcraft Zinc Double Expansion Shield Pack of 50/24/10 NEW USA - 3/8in-3/4"in Highcraft Zinc Double Expansion Shield Pack of 50/24/10 NEW USA.
- 16mm Hex Nut Sleeve Masonry Concrete Anchor Zinc - Zinc plated, ‘NUT’ Type. The Hex Nut sleeve anchor is a thin walled sleeve anchor suitable for use in concrete, stone, brickwork, perforated bricks and dense concrete blocks. Installation Drill the correct size hole, clear/ clean the hole, place the anchor in the hole, set the anchor by tightening the nut.
- 12mm Hex Nut Sleeve Masonry Concrete Anchor Zinc - Zinc plated, ‘NUT’ Type. The Hex Nut sleeve anchor is a thin walled sleeve anchor suitable for use in concrete, stone, brickwork, perforated bricks and dense concrete blocks. Installation Drill the correct size hole, clear/ clean the hole, place the anchor in the hole, set the anchor by tightening the nut.
- 10mm Hex Nut Sleeve Masonry Concrete Anchor Zinc - Zinc plated, ‘NUT’ Type. The Hex Nut sleeve anchor is a thin walled sleeve anchor suitable for use in concrete, stone, brickwork, perforated bricks and dense concrete blocks. Installation Drill the correct size hole, clear/ clean the hole, place the anchor in the hole, set the anchor by tightening the nut.
- 16mm Sleeve Masonry Concrete Anchor Bolt Type Zinc - Anchors for Brick/ Block, Concrete, Stone. Fixture Thickness Minimum Hole Depth 8 x 40 8 10 M6 12 35 8 x 70 8 10 M6 37 40 8 x 90 8 10 M6 50 40 10 x 40 10 12 M8 3 45 10 x 50 10 12 M8 12 45 10 x 77 10 12 M8 35 45 10 x 97 10 12 M8 50 45 12 x 60 12 15 M10 12 50 12 x 75 12 15 M10 27 60 12 x 99 12 15 M10 50 60 12 x 129 12 15 M10 80 60 16 x 65 16 19 M12 6 60 16 x 110 16 19 M12 106 65 16 x 150 16 19 M12 140 65 20 x 80 20 24 M16 81 70 20 x 110 20 24 M16 113 70 20 x 150 20 24 M16 157 70 Image is for illustrative purposes only.
- 12mm Sleeve Masonry Concrete Anchor Bolt Type Zinc - Anchors for Brick/ Block, Concrete, Stone. Fixture Thickness Minimum Hole Depth 8 x 40 8 10 M6 12 35 8 x 70 8 10 M6 37 40 8 x 90 8 10 M6 50 40 10 x 40 10 12 M8 3 45 10 x 50 10 12 M8 12 45 10 x 77 10 12 M8 35 45 10 x 97 10 12 M8 50 45 12 x 60 12 15 M10 12 50 12 x 75 12 15 M10 27 60 12 x 99 12 15 M10 50 60 12 x 129 12 15 M10 80 60 16 x 65 16 19 M12 6 60 16 x 110 16 19 M12 106 65 16 x 150 16 19 M12 140 65 20 x 80 20 24 M16 81 70 20 x 110 20 24 M16 113 70 20 x 150 20 24 M16 157 70 Image is for illustrative purposes only.
- M12 Projecting Bolt Nut Stud Shield Masonry Concrete Anchor Zinc - What is a projecting bolt and where are they most commonly applied?. Projecting Bolt, Masonry Shield Anchor is a heavy duty, builder’s masonry, expansion anchor, for fixing heavy materials and fixtures.
- M16 Projecting Bolt Nut Stud Shield Masonry Concrete Anchor Zinc - What is a projecting bolt and where are they most commonly applied?. Projecting Bolt, Masonry Shield Anchor is a heavy duty, builder’s masonry, expansion anchor, for fixing heavy materials and fixtures.
- M10 Projecting Bolt Nut Stud Shield Masonry Concrete Anchor Zinc - What is a projecting bolt and where are they most commonly applied?. Projecting Bolt, Masonry Shield Anchor is a heavy duty, builder’s masonry, expansion anchor, for fixing heavy materials and fixtures.
- M8 Projecting Bolt Nut Stud Shield Masonry Concrete Anchor Zinc - What is a projecting bolt and where are they most commonly applied?. Projecting Bolt, Masonry Shield Anchor is a heavy duty, builder’s masonry, expansion anchor, for fixing heavy materials and fixtures.
- Everbilt 3/8 in x 1-3/4 in. Masonry Anchor Zinc-Alloy Lag Shields (15-Pack) - These lag or expansion shields are used for fastening lag screws into fastening into wood and concrete. The expansion shield acts as an anchoring point into a concrete slab or foundation, expanding when the screw threads are engaged during installation.
- 150 Long Lag Screw Shields 5/16” Bolt x 1-3/4”long Shield x 1/2” Hole Concrete - 3 boxes of 50 ‘US Anchor’ Long Lag Shields Zinc Superloy 5/16” Lag x 1/2” Hole x 1-3/4”long
- 50 Lag Screw Shields Zinc Superloy 1/4” Lag x 1/2” Hole x 1” long ‘Curtis’ - 50 Short Lag Screw Shields Zinc Superloy 1/4” Lag x 1/2” Hole x 1”long.
- M10 Throughbolts Galvanised Heavy Duty Masonry Concrete Anchor - M10 Throughbolts Galvanised Heavy Duty Masonry Concrete Anchor M10 - Throughbolts - Rag Bolts - Heavy Duty, Concrete/ Masonry Anchor, Hot Dip Galvanised - All Lengths. What is a Throughbolt?. (also known as Rag Bolt) Through bolt, expansion, masonry anchors are used for fixing materials to non-cracked concrete/ masonry (brick/ blocks), and non-porous stone.
- 10mm Hex Nut Sleeve Masonry Concrete Anchor Zinc - Zinc plated, ‘NUT’ Type. The Hex Nut sleeve anchor is a thin walled sleeve anchor suitable for use in concrete, stone, brickwork, perforated bricks and dense concrete blocks. Installation Drill the correct size hole, clear/ clean the hole, place the anchor in the hole, set the anchor by tightening the nut.
- 16mm Hex Nut Sleeve Masonry Concrete Anchor Zinc - Zinc plated, ‘NUT’ Type. The Hex Nut sleeve anchor is a thin walled sleeve anchor suitable for use in concrete, stone, brickwork, perforated bricks and dense concrete blocks. Installation Drill the correct size hole, clear/ clean the hole, place the anchor in the hole, set the anchor by tightening the nut.
- 20mm Diameter Hex Nut Sleeve Masonry Anchors Zinc - Zinc plated, ‘NUT’ Type. The Hex Nut sleeve anchor is a thin walled sleeve anchor suitable for use in concrete, stone, brickwork, perforated bricks and dense concrete blocks. Installation Drill the correct size hole, clear/ clean the hole, place the anchor in the hole, set the anchor by tightening the nut.
- 12mm Hex Nut Sleeve Masonry Concrete Anchor Zinc - Zinc plated, ‘NUT’ Type. The Hex Nut sleeve anchor is a thin walled sleeve anchor suitable for use in concrete, stone, brickwork, perforated bricks and dense concrete blocks. Installation Drill the correct size hole, clear/ clean the hole, place the anchor in the hole, set the anchor by tightening the nut.
- 10mm Diameter Sleeve Masonry Concrete Anchor Bolt Type Zinc - Anchors for Brick/ Block, Concrete, Stone. Fixture Thickness Minimum Hole Depth 8 x 40 8 10 M6 12 35 8 x 70 8 10 M6 37 40 8 x 90 8 10 M6 50 40 10 x 40 10 12 M8 3 45 10 x 50 10 12 M8 12 45 10 x 77 10 12 M8 35 45 10 x 97 10 12 M8 50 45 12 x 60 12 15 M10 12 50 12 x 75 12 15 M10 27 60 12 x 99 12 15 M10 50 60 12 x 129 12 15 M10 80 60 16 x 65 16 19 M12 6 60 16 x 110 16 19 M12 106 65 16 x 150 16 19 M12 140 65 20 x 80 20 24 M16 81 70 20 x 110 20 24 M16 113 70 20 x 150 20 24 M16 157 70 Image is for illustrative purposes only.
- 12mm Sleeve Masonry Concrete Anchor Bolt Type Zinc - Anchors for Brick/ Block, Concrete, Stone. Fixture Thickness Minimum Hole Depth 8 x 40 8 10 M6 12 35 8 x 70 8 10 M6 37 40 8 x 90 8 10 M6 50 40 10 x 40 10 12 M8 3 45 10 x 50 10 12 M8 12 45 10 x 77 10 12 M8 35 45 10 x 97 10 12 M8 50 45 12 x 60 12 15 M10 12 50 12 x 75 12 15 M10 27 60 12 x 99 12 15 M10 50 60 12 x 129 12 15 M10 80 60 16 x 65 16 19 M12 6 60 16 x 110 16 19 M12 106 65 16 x 150 16 19 M12 140 65 20 x 80 20 24 M16 81 70 20 x 110 20 24 M16 113 70 20 x 150 20 24 M16 157 70 Image is for illustrative purposes only.
- 16mm Sleeve Masonry Concrete Anchor Bolt Type Zinc - Anchors for Brick/ Block, Concrete, Stone. Fixture Thickness Minimum Hole Depth 8 x 40 8 10 M6 12 35 8 x 70 8 10 M6 37 40 8 x 90 8 10 M6 50 40 10 x 40 10 12 M8 3 45 10 x 50 10 12 M8 12 45 10 x 77 10 12 M8 35 45 10 x 97 10 12 M8 50 45 12 x 60 12 15 M10 12 50 12 x 75 12 15 M10 27 60 12 x 99 12 15 M10 50 60 12 x 129 12 15 M10 80 60 16 x 65 16 19 M12 6 60 16 x 110 16 19 M12 106 65 16 x 150 16 19 M12 140 65 20 x 80 20 24 M16 81 70 20 x 110 20 24 M16 113 70 20 x 150 20 24 M16 157 70 Image is for illustrative purposes only.
- Heavy-duty dowels steel slimming heavy-duty anchor bolt anchor ETA approval M12-M20 c - Der Stahlanker ist galvanisch verzinkt und wird komplett mit Mutter und Unterlegscheibegeliefert. Er eignet sich für Befestigungen in festen Baustoffen. Die Stahlanker besitzen eine ETA Zulassung für ungerissenen Beton. Dieser wirtschaftliche und zeitsparende Anker wird besonders zur Befestigung von Metallkonstruktionen, Maschinen, Holzunterkonstruktionen und Hochbaubefestigungen eingesetzt. Die Verarbeitung darf nur in dichtporigen Steinen bzw. in Beton oder Naturstein erfolgen. Material: Stahl Oberfläche: verzinkt Größe M12 - M20 incl. Mutter + Unterlegscheibe Rechnung: ...mit ausgewiesener MwSt. .
- M10 Projecting Bolt Nut Stud Shield Masonry Concrete Anchor Zinc - What is a projecting bolt and where are they most commonly applied?. Projecting Bolt, Masonry Shield Anchor is a heavy duty, builder’s masonry, expansion anchor, for fixing heavy materials and fixtures.
- M8 Projecting Bolt Nut Stud Shield Masonry Concrete Anchor Zinc - What is a projecting bolt and where are they most commonly applied?. Projecting Bolt, Masonry Shield Anchor is a heavy duty, builder’s masonry, expansion anchor, for fixing heavy materials and fixtures.
- M8 Hex Concrete Anchor Screw Self-Tapping High Tensile Zinc - M8 Hex Concrete Anchor Screw Self-Tapping High Tensile Zinc M8, JCP Anker Masonry Concrete Anchor Screw, Self Tapping, Hexagon Head, Zinc Plated (Lightening/ Thunder Bolt, type). Self Tapping Concrete Screw Installation Simply drill a hole using the correct masonry drill bit, remove the dust and debris and twist in with a socket wrench/ hexagon adapter.
- Wire Hangers Concrete Masonry Anchor Fixing Zinc - Wire Hangers Concrete Masonry Anchor Fixing Zinc Wire Hangers – Masonry Fixing. Image is for illustrative purposes only. Wire Hangers – Masonry Fixing. Installation : Quick, easy – 6mm masonry bit required.
- M12 Throughbolts Zinc ETA APPROVED Heavy Duty Masonry Anchor - M12 Throughbolts Zinc ETA APPROVED Heavy Duty Masonry Anchor ETA Approved, M12 - Through Bolt - Rag Bolt - Heavy Duty, Concrete/ Masonry Anchor - All Lengths. Reliability of masonry anchors starts with the substrate.
- M10 Throughbolts Zinc ETA APPROVED Heavy Duty Masonry Anchor - What is a Throughbolt?. (also known as Rag Bolt) Through bolt, expansion, masonry anchors are used for fixing materials to non-cracked concrete/ masonry (brick/ blocks), and non-porous stone. The concrete base must be compact and porosity insignificant.
- M6 Loose Bolt High Tensile 8.8 Masonry Shield Anchor Zinc - Holes must be square to the surface of the base material (e.g concrete) for safety during installation and to optimise holding capacity. Optimising your fixings holding capacity. Clean the hole using an appropriate sized brush Installation Temp is 0°: make sure water does not seep into the hole.
- M6 Throughbolts Masonry Anchor Zinc ETA APPROVED Heavy Duty - M6 Throughbolts Masonry Anchor Zinc ETA APPROVED Heavy Duty ETA Approved M6 - Through Bolts - Heavy Duty, Concrete Masonry Anchor - All Lengths. Through bolt, expansion, masonry anchors are used for fixing materials to non-cracked concrete/ masonry (brick/ blocks), and non-porous stone.
- M6 Drop In Masonry Concrete Anchor Lipped Zinc - M6 Drop In Masonry Concrete Anchor Lipped Zinc M6, 6mm Internal Thread, Drop In Anchor, Lipped, Zinc - Masonry, Brick, Concrete Expansion Anchor. Lipped Drop In Anchor A Lipped Drop In Anchor Expansion anchor for fixing materials to all types of masonry, concrete, brick and non-porous stone.
- 6mm Masonry Anchor Screw Torx Countersunk Zinc JCP Anker Bolt - The M6 Bolt requires a 6mm Masonry Drill Bit (8mm tapping thread) T30 Drill driver bit required M6, Masonry/ Concrete Anchor Screw Lengths available: Ankerbolts - Countersunk Hd. Torx Drive. 6mm x 30mm.
- M10 Throughbolts A2 Stainless Steel Heavy Duty Masonry Concrete Anchor - The Stainless Steel Throughbolt is grade A2/304. It is ideal for bolting in place awkward fixtures without the need for marking out, removal and repositioning. Throughbolt, expansion anchors are used for fixing materials to non-cracked concrete/ masonry (brick/ blocks), and non-porous stone.
- 8mm Sleeve Masonry Concrete Anchor Eye Bolt Zinc - The Eye Bolt sleeve anchor is a thin walled sleeve anchor suitable for use in concrete, stone, brickwork, perforated bricks and dense concrete blocks. Sleeve Anchors - Eyebolt - Zinc Sizes Available Anchor Hole Size Min Hole Depth 8mm 45mm Material - Zinc Use a zinc plated, masonry anchor when you need to hold materials/ fixtures in the dry.
- M8 Throughbolts A2 Stainless Steel Heavy Duty Masonry Concrete Anchor - Throughbolt, expansion anchors are used for fixing materials to non-cracked concrete/ masonry (brick/ blocks), and non-porous stone. Stainless Steel Grade A2/304 Throughbolt Masonry AnchorThroughbolt, expansion anchors are used for fixing materials to non-cracked concrete/ masonry (brick/ blocks), and non-porous stone.
- M16 Throughbolts A2 Stainless Steel Heavy Duty Masonry Concrete Anchor - Stainless Steel Grade A2/304 Throughbolt Masonry AnchorThroughbolt, expansion anchors are used for fixing materials to non-cracked concrete/ masonry (brick/ blocks), and non-porous stone. The Stainless Steel Throughbolt is grade A2/304.
- M8, Sleeve Anchor Hook Bolt, High Tensile, Masonry Shield Anchor, Zinc. - Sleeve Masonry Anchors for Brick/ Block, Concrete and Dense Stone. Zinc, ‘Hook-Bolt’ Type. Material - Zinc Use a zinc plated, masonry anchor when you need to hold materials/ fixtures in the dry. Image is for illustrative purposes only.
- M6 Throughbolts A2 Stainless Steel Heavy Duty Masonry Concrete Anchor - Throughbolt, expansion anchors are used for fixing materials to non-cracked concrete/ masonry (brick/ blocks), and non-porous stone. Stainless Steel Grade A2/304 Throughbolt Masonry AnchorThroughbolt, expansion anchors are used for fixing materials to non-cracked concrete/ masonry (brick/ blocks), and non-porous stone.
- M6 Projecting Bolt Nut Stud Shield Masonry Concrete Anchor Zinc - What is a projecting bolt and where are they most commonly applied?. Projecting Bolt, Masonry Shield Anchor is a heavy duty, builder’s masonry, expansion anchor, for fixing heavy materials and fixtures.
- 8mm Sleeve Masonry Concrete Anchor Bolt Type Zinc - Anchors for Brick/ Block, Concrete, Stone. Fixture Thickness Minimum Hole Depth 8 x 40 8 10 M6 12 35 8 x 70 8 10 M6 37 40 8 x 90 8 10 M6 50 40 10 x 40 10 12 M8 3 45 10 x 50 10 12 M8 12 45 10 x 77 10 12 M8 35 45 10 x 97 10 12 M8 50 45 12 x 60 12 15 M10 12 50 12 x 75 12 15 M10 27 60 12 x 99 12 15 M10 50 60 12 x 129 12 15 M10 80 60 16 x 65 16 19 M12 6 60 16 x 110 16 19 M12 106 65 16 x 150 16 19 M12 140 65 20 x 80 20 24 M16 81 70 20 x 110 20 24 M16 113 70 20 x 150 20 24 M16 157 70 Image is for illustrative purposes only.
- 8mm 10mm Sleeve Masonry Concrete Anchor Eye Bolt A2 Stainless Steel - A2/ 304 Stainless, ‘Eye-Bolt’ Type. The Eye Bolt Stainless Steel A2/304 sleeve anchor is a thin-walled sleeve anchor suitable for indoor or outdoor use in concrete, stone, brickwork, perforated bricks and dense concrete blocks.
- M12 Throughbolts A2 Stainless Steel Heavy Duty Masonry Concrete Anchor - Stainless Steel Grade A2/304 Throughbolt Masonry AnchorThroughbolt, expansion anchors are used for fixing materials to non-cracked concrete/ masonry (brick/ blocks), and non-porous stone. The Stainless Steel Throughbolt is grade A2/304.
- M24 Throughbolts Zinc ETA APPROVED Heavy Duty Masonry Anchor - The concrete base must be compact and porosity insignificant. Minimum installation depth values must always be respected: for anchors’ depth, for anchor-to-anchor distances and for anchor-to-edge distances.
- 5mm Masonry Anchor Screw Torx Countersunk Zinc JCP Anker Bolt - It also allows the user to adjust or remove the bolt ensuring a secure and accurate installation. 5mm, Countersunk, Concrete Screws Installation Simply drill a hole square to the surface using the correct masonry drill bit, remove the dust and debris and twist in with a T30 Drill driver bit.
- 8mm Masonry Anchor Screw Torx Countersunk Zinc JCP Anker Bolt - Installation Simply drill a hole square to the surface using the correct masonry drill bit, remove the dust and debris and twist in with a T30 Drill driver bit. These fixings do not need plastic plugs of sheilds as they selt tap the hole in the pre drilled concrete.
- 10mm Masonry Anchor Screw Torx Countersunk Zinc JCP Anker Bolt - The M10 Bolt requires a 10mm Masonry Drill Bit (12mm Self Tapping Thread) T50 Drill driver bit required 10mm, Masonry/ Concrete Anchor Screw Lengths available: Ankerbolts - Countersunk Hd. Torx Drive.
- (Lot 20) Machine Screw Lead Anchor Treaded 1/2" Hole
- Qty 40 ea. 3/8" x 1-3/4" Lag Screw Shield Anchor Short Zinc Alloy 5/8" Hole - Qty 40 ea. 3/8" x 1-3/4" Lag Screw Shield Anchor Short Zinc Alloy 5/8" Hole.
- Wej-It MS14 Expansion Shield Anchor 7/8" Length, 1/4"-20 Threads Box of 100 - Anchor consists of an antimonial lead sleeve that expands around the zamac alloy cone, gripping the mounting material to hold the anchor in place. Expansion shield anchor provides a secure hold in most materials, including solid masonry and uncracked concrete.
- (Qty 250) 3/8" x 1-3/4" Lag Screw Shield Anchor Short Zinc Alloy 5/8" Hole - (Qty 250) 3/8" x 1-3/4" Lag Shield Anchor Short Zinc Alloy 5/8" Hole.
- M6 M8 M10 M12 Eye Bolt Masonry Shield Anchor Zinc - Expansion anchor for fixing to all types of masonry, brick/ block and non-porous stone. How to install an eyebolt brick anchor Drill the correct size hole, clear/ clean the hole, place the anchor in the hole, set the anchor by tightening the nut.
- M8 Loose Bolt High Tensile 8.8 Masonry Shield Anchor Zinc - Holes must be square to the surface of the base material (e.g concrete) for safety during installation and to optimise holding capacity. Optimising your fixings holding capacity. Clean the hole using an appropriate sized brush Installation Temp is 0°: make sure water does not seep into the hole.
- M10 Loose Bolt High Tensile 8.8 Masonry Shield Anchor Zinc - Optimising your fixings holding capacity. Clean the hole using an appropriate sized brush Installation Temp is 0°: make sure water does not seep into the hole. The expansion water to ice could crack the concrete.
- M16 Loose Bolt High Tensile 8.8 Masonry Shield Anchor Zinc - Holes must be square to the surface of the base material (e.g concrete) for safety during installation and to optimise holding capacity. Optimising your fixings holding capacity. Clean the hole using an appropriate sized brush Installation Temp is 0°: make sure water does not seep into the hole.
- M6 Loose Bolt High Tensile 8.8 Masonry Shield Anchor Zinc - Holes must be square to the surface of the base material (e.g concrete) for safety during installation and to optimise holding capacity. Optimising your fixings holding capacity. Clean the hole using an appropriate sized brush Installation Temp is 0°: make sure water does not seep into the hole.
- M12 Loose Bolt High Tensile 8.8 Masonry Shield Anchor Zinc - Holes must be square to the surface of the base material (e.g concrete) for safety during installation and to optimise holding capacity. Optimising your fixings holding capacity. Clean the hole using an appropriate sized brush Installation Temp is 0°: make sure water does not seep into the hole.
- M10 Eye Bolt High Tensile Masonry Shield Anchor Zinc - How to install an eyebolt masonry anchor Drill the correct size hole, clear/ clean the hole, place the anchor in the hole, set the anchor by tightening the nut. Expansion anchor for fixing to all types of masonry, brick/ block and non-porous stone.
- M6 Projecting Bolt Nut Stud Shield Masonry Concrete Anchor Zinc - What is a projecting bolt and where are they most commonly applied?. Projecting Bolt, Masonry Shield Anchor is a heavy duty, builder’s masonry, expansion anchor, for fixing heavy materials and fixtures.
- M16 Loose Bolt High Tensile 8.8 Masonry Shield Anchor Zinc - Holes must be square to the surface of the base material (e.g concrete) for safety during installation and to optimise holding capacity. Optimising your fixings holding capacity. Clean the hole using an appropriate sized brush Installation Temp is 0°: make sure water does not seep into the hole.
- M12 Hex Concrete Anchor Screw Self-Tapping High Tensile Zinc - M12 Hex Concrete Anchor Screw Self-Tapping High Tensile Zinc M12, JCP Anker, Masonry Concrete Anchor Screw, Self Tapping, Hexagon Head, Zinc Plated (Lightening/ Thunder/ Anker Bolt, type). M12 concrete screw anchors Installation Simply drill a hole using the correct masonry drill bit, remove the dust and debris and twist in with a socket wrench/ hexagon adapter.
- M16 Hex Concrete Anchor Screw Self-Tapping High Tensile Zinc - M16 concrete screw anchors Installation Simply drill a hole using the correct masonry drill bit, remove the dust and debris and twist in with a socket wrench/ hexagon adapter. No need for plastic plugs as the thread in the concrete is created as you insert the anchor.
- M12 Loose Bolt High Tensile 8.8 Masonry Shield Anchor Zinc - Holes must be square to the surface of the base material (e.g concrete) for safety during installation and to optimise holding capacity. Optimising your fixings holding capacity. Clean the hole using an appropriate sized brush Installation Temp is 0°: make sure water does not seep into the hole.
- M8 Loose Bolt High Tensile 8.8 Masonry Shield Anchor Zinc - Holes must be square to the surface of the base material (e.g concrete) for safety during installation and to optimise holding capacity. Optimising your fixings holding capacity. Clean the hole using an appropriate sized brush Installation Temp is 0°: make sure water does not seep into the hole.
- M10 Loose Bolt High Tensile 8.8 Masonry Shield Anchor Zinc - Optimising your fixings holding capacity. Clean the hole using an appropriate sized brush Installation Temp is 0°: make sure water does not seep into the hole. The expansion water to ice could crack the concrete.
- M10 Eye Bolt High Tensile Masonry Shield Anchor Zinc - How to install an eyebolt masonry anchor Drill the correct size hole, clear/ clean the hole, place the anchor in the hole, set the anchor by tightening the nut. Expansion anchor for fixing to all types of masonry, brick/ block and non-porous stone.
- M10 Hex Concrete Anchor Screw Self-Tapping High Tensile Zinc - It also allows the user to adjust or remove the bolt ensuring a secure and accurate installation. M10, Masonry Concrete Anchor Screw Lengths Available: Ankerbolts - Hex Head. - 10mm x 60mm. Ankerbolts - Hex Head.
- Masonry Concrete Stone Door Window Frame Screw Countersunk ZYP - Features & benefits Virtually stress free fixing, allowing close to edge applications. Through-fixing, eliminating the need for marking and re-positioning. High load capacity with interlocking thread into the base material.
- M6 M8 M10 M12 M16 M20 Drop In Anchor Setting Tool Zinc - M6 M8 M10 M12 M16 M20 Drop In Anchor Setting Tool Zinc M6, M8, M10, M12. This will force the masonry anchor's, nut downwards, expand the sides and create a secure hold from the bottom of the hole. Clear the hole of all debris with a brush and blow out pump.
- M6 Drop In Masonry Concrete Anchor Zinc - M6 Drop In Masonry Concrete Anchor Zinc M6, 6mm Internal Thread, Drop In Anchor, Zinc - Masonry, Brick, Concrete Expansion Anchor. M6 Drop In Anchor A drop in, masonry anchor is an expansion anchor for fixing materials to all types of masonry, concrete, brick and non-porous stone.
- 6mm 8mm 10mm 12mm Sleeve Anchors Nut-Type A4 Stainless Steel - A4/ 316 Stainless Steel, NUT Type. The Stainless Steel A4 sleeve anchor is a thin walled sleeve anchor suitable for use in concrete, stone, brickwork, perforated bricks and dense concrete blocks. Sleeve Anchor, 'NUT' Type Sizes Available Anchor Hole Size Anchor Length 6mm 60mm 8mm 40mm 8mm 65mm 10mm 50mm 10mm 75mm 10mm 100mm 12mm 60mm 12mm 75mm 12mm 100mm Material - A4/ 316 Stainless Steel A4/ 316 is used when performance of a fixing depends on it's ability to withstand constant weathering and chemical attack.
- 8mm 10mm 12mm Sleeve Anchors Countersunk Hex A2 Stainless Steel - A2/ 304 Stainless Steel, ‘Countersunk’ Type. A countersunk head can fit into a countersunk hole leaving the fixing sitting flush, neat and modern on a visible surface. The Stainless Steel A2 sleeve anchor is a thin walled sleeve anchor suitable for use in concrete, stone, brickwork, perforated bricks and dense concrete blocks.
- 8mm Hex Nut Sleeve Masonry Concrete Anchor Zinc - Zinc plated, ‘NUT’ Type. The Hex Nut sleeve anchor is a thin walled sleeve anchor suitable for use in concrete, stone, brickwork, perforated bricks and dense concrete blocks. Installation Drill the correct size hole, clear/ clean the hole, place the anchor in the hole, set the anchor by tightening the nut.
- 8mm 10mm Sleeve Masonry Anchor Countersunk Pozi Zinc - 8mm 10mm Sleeve Masonry Anchor Countersunk Pozi Zinc 8mm and 10mm, Sleeve Masonry Anchors for Brick/ Block, Concrete, Stone. Zinc plated, ‘Countersunk’ Type. A countersunk head can fit into a countersunk hole leaving the fixing sitting flush, neat and modern on a visible surface.
- M8 Throughbolts Zinc ETA Approved Heavy Duty Masonry Anchor - M8 Throughbolts Zinc ETA Approved Heavy Duty Masonry Anchor ETA Approved, M8 - Through Bolts - Heavy Duty - Concrete/ Masonry Anchors - All Lengths. Through bolt, expansion, masonry anchors are used for fixing materials to non-cracked concrete/ masonry (brick/ blocks), and non-porous stone.
- M16 Throughbolts Zinc ETA Approved Heavy Duty Masonry Anchor - Through bolt, expansion, masonry anchors are used for fixing materials to non-cracked concrete/ masonry (brick/ blocks), and non-porous stone. The concrete base must be compact and porosity insignificant.
- M20 Throughbolts Zinc ETA APPROVED Heavy Duty Masonry Anchor - M20 Throughbolts Zinc ETA APPROVED Heavy Duty Masonry Anchor ETA Approved, M20 - Through Bolts - Rag Bolts, Heavy Duty, Concrete. The concrete base must be compact and porosity insignificant. Minimum installation depth values must always be respected: for anchors’ depth, for anchor-to-anchor distances and for anchor-to-edge distances.
- RedHead Lag Shields For Brick, Block, Concrete 1/4” L length, QTY 5 - RedHead Lag Shields For Brick, Block, Concrete 1/4” L length, QTY 5. Let me know if you have any questions. OFFERS ARE WELCOME!!!
- Lag Shields - various sizes - 25 per pack - Can be used in all types of masonry from concrete to brick. Unique four way expansion assures a tight grip even in out-of-round holes. Short style for hard masonry, long style for soft.
- Single Expansion Shield Anchor, Zinc alloy, 1/2” Bolt 7/8” Hole x 2” (BAG OF 10) - Single Expansion Shield Anchor (BAG OF 10). Zinc alloy.
- Single Expansion Shield Anchor, 3/8 Bolt, 5/8 Hole, 1.5", Zinc Alloy (BAG of 10) - Single Expansion Shield Anchor (BAG of 10). Zinc Alloy. 3/8 Bolt, 5/8 Hole.
- Window Dowels - Metal Frame Dowels WU 10/152 - 7 Piece - Leuchtendes Ei - Eierlampedeutliche Gebrauchsspuren und Schäden am Cover Platte guter Zustand.
- Hard-to-Find Fastener 014973269661 Lag Expansion Shields, 5/8 Long, Piece-25 - Material: Steel. Finish: Zinc. Length: Long.
- (Box/50) Star 1/4" Short Lag Shield 1" Long 1/2" Hole - New box of 50.
- Tap-Pro Lag Shields - Tap-Pro Lag Shields. Condition is "New". Total of 20 lag shields for use in concrete and masonry. Diameter: 3/8" and length 1& 3/4". Packaging is old and opened but items are in excellent condition. Shipped with USPS First Class.
- 5/8" x 2" Lag Screw Expansion Shield Short Zinc Alloy - Fastener Type: Lag Screw Expansion Shield Short. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Material: Zinc Alloy. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
- 5/8" Expansion Shield Anchor Single Zinc Alloy - Fastener Type: Expansion Shield Anchor Single. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Material: Zinc Alloy. Finish: Plain Finish (No Plating). PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
- 5/16" Expansion Shield Anchor Single Zinc Alloy - Fastener Type: Expansion Shield Anchor Single. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Material: Zinc Alloy. Finish: Plain Finish (No Plating). PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
- 3/8" Expansion Shield Anchor Single Zinc Alloy - Fastener Type: Expansion Shield Anchor Single. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Material: Zinc Alloy. Finish: Plain Finish (No Plating). PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
- 3/4" x 3 1/2" Lag Screw Expansion Shield Short Zinc Alloy - Fastener Type: Lag Screw Expansion Shield Short. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Material: Zinc Alloy. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
- 3/4" Expansion Shield Anchor Single Zinc Alloy - Fastener Type: Expansion Shield Anchor Single. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Material: Zinc Alloy. Finish: Plain Finish (No Plating). PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
- 1/4" x 1" Lag Screw Expansion Shield Short Zinc Alloy - Fastener Type: Lag Screw Expansion Shield Short. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Material: Zinc Alloy. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
- 1/2" x 3" Lag Screw Expansion Shield Short Zinc Alloy - Fastener Type: Lag Screw Expansion Shield Short. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Material: Zinc Alloy. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
- US ANCHOR CONCRET ANCHOR DOUBLE EXPANSION SHIELD 5/16" X 1 1/4" box of 50 . - US ANCHOR, POMPANO BEACH, FL.
- 20Yy03 Lag Screw Shield Anchors, 5/16", 20 Pcs, New Open Bag - LAG SCREW SHIELD ANCHORS, 5/16", 20 PCS, NEW OPEN BAG. LAG SCREW SHIELD ANCHORS, 5/16", 20 PCS NEW OPEN BAG P42610. ITEM CODING.
- (28) Lag bolt shields 3/4" hole 1/2" Lag 3" long
- Lot of 2 x 1/2" x 3" Lag Shield Zinc Alloy 3/4" Drill Size 3" Minimum Embedment - Up for sale are Crown Bolt Inc. lag shields. This Buy It Now is for 2 lag shields. Zinc Alloy. Drill Size: 3/4" These are. Local pickup is also available.
- Hardware Lag Shield Anchors 1/4 Long
- Hardware Lag Shield Anchors 5/16 Short
- Hardware Lag Shield Anchors 1/2 Long
- Hardware Lag Shield Anchors 1/2 Short
- Hardware Lag Shield Anchors 3/8 Long
- Concrete Anchor 3/8X1 3/4 Inch Zinc Plated Exterior Interior Metallic 15 Pack - These lag or expansion shields are used for fastening lag screws into fastening into wood and concrete. The expansion shield acts as an anchoring point into a concrete slab or foundation, expanding when the screw threads are engaged during installation.
- Lot Of 41- 1/4" x 1-1/2" Universal Brand Lag Shield Anchor, 1/2" Hole - Lot Of 41- 1/4" x 1-1/2" Universal Brand Lag Shield Anchor, 1/2" Hole. Condition is New. Shipped with USPS Priority Mail.This sale is for what is left of an opened box, box has seen better days, but shields are in perfect condition If you are interested in multiple items please let me know, I can combine shipping
- 100 New Rawl Scru-Leads 6-8 X 1 Inch, Macine Screw Anchor - 100 New Rawl Scru-Leads 6-8 X 1 Inch, Macine Screw Anchor. Shipped with USPS Priority Mail.Items will be shipped in a priority mail envelope If you are interested in multiple items please let me know, I can combine shipping
- Sun Hardware Lag Shields for Masonry, 6 pc, 1/2" short, Use 3/4" Drill
- Hillman 3/8” Long Lag Shield Qty 12 - Hillman 3/8” Long Lag Shield Qty 12. Condition is New. Shipped with USPS First Class Package.
- Hillman 5/16” Short Lag Shield Qty 50 - Hillman 5/16” Short Lag Shield Qty 50. Condition is New. Shipped with USPS First Class Package.
- Hillman 1/4” Short Lag Shield Qty 50 - Hillman 1/4” Short Lag Shield Qty 50. Condition is New. Shipped with USPS First Class Package.
- Hillman 1/2” Short Lag Shield Qty 10 - Hillman 1/2” Short Lag Shield Qty 10. Condition is New. Shipped with USPS First Class Package.
- Hillman 1/2” Long Lag Shield (8 Pcs) - Hillman 1/2” Long Lag Shield (8 Pcs). Condition is New. Shipped with USPS First Class Package.
- Lag Sheilds Misc Sizes 1/4" 5/16" 3/8" Approx 100 pc lot - Lag Sheilds. Misc Sizes 1/4" 5/16" 3/8". Approx 100 pc lot.
- US ANCHOR DOUBLE EXPANSION SHIELD 5/16" X 1 1/4" 2 boxes of 50 ea. - US ANCHOR, POMPANO BEACH, FL.
- US ANCHOR DOUBLE EXPANSION SHIELD 5/16" X 1 1/4" box of 50 - US ANCHOR, POMPANO BEACH, FL.
- 1/2" Expansion Shield Anchor Single Zinc Alloy - Fastener Type: Expansion Shield Anchor Single. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Material: Zinc Alloy. Finish: Plain Finish (No Plating). PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
- Crown Bolt Inc. Lag Shield Masonry Anchors, 1/2" Short/2" Long, (Lot Of 3), Nib - CROWN BOLT INC. LAG SHIELD MASONRY ANCHORS. (LOT OF 3). 1/2" SHORT/2" LONG. Part Number.
- (Qty 250) 1/2" x 2" Lag Screw Shield Anchor Short Zinc Alloy 3/4" Hole
- (Qty 100) 1/2" x 2" Lag Screw Shield Anchor Short Zinc Alloy 3/4" Hole
- (Qty 25) 1/2" x 2" Lag Screw Shield Anchor Short Zinc Alloy 3/4" Hole
- (Qty 10) 1/2" x 2" Lag Screw Shield Anchor Short Zinc Alloy 3/4" Hole
- (Qty 250) 3/8" x 1-3/4" Lag Screw Shield Anchor Short Zinc Alloy 5/8" Hole - (Qty 250) 3/8" x 1-3/4" Lag Shield Anchor Short Zinc Alloy 5/8" Hole.
- (Qty 100) 3/8" x 1-3/4" Lag Screw Shield Anchor Short Zinc Alloy 5/8" Hole - (Qty 100) 3/8" x 1-3/4" Lag Shield Anchor Short Zinc Alloy 5/8" Hole.
- (Qty 25) 3/8" x 1-3/4" Lag Screw Shield Anchor Short Zinc Alloy 5/8" Hole - (Qty 25) 3/8" x 1-3/4" Lag Shield Anchor Short Zinc Alloy 5/8" Hole.
- (Qty 10) 3/8" x 1-3/4" Lag Shield Anchor Short Zinc Alloy 5/8" Hole
- (Qty 1000) 5/16" x 1-1/4" Lag Shield Anchor Short Zinc Alloy 1/2" Hole
- (Qty 250) 5/16" x 1-1/4" Lag Shield Anchor Short Zinc Alloy 1/2" Hole
- (Qty 100) 5/16" x 1-1/4" Lag Shield Anchor Short Zinc Alloy 1/2" Hole
- (Qty 25) 5/16" x 1-1/4" Lag Shield Anchor Short Zinc Alloy 1/2" Hole
- (Qty 10) 5/16" x 1-1/4" Lag Shield Anchor Short Zinc Alloy 1/2" Hole
- (Qty 1000) 1/4" x 1" Lag Shield Anchor Short Zinc Alloy 1/2" Hole
- (Qty 250) 1/4" x 1" Lag Shield Anchor Short Zinc Alloy 1/2" Hole
- (Qty 100) 1/4" x 1" Lag Shield Anchor Short Zinc Alloy 1/2" Hole
- (Qty 25) 1/4" x 1" Lag Shield Anchor Short Zinc Alloy 1/2" Hole
- (Qty 10) 1/4" x 1" Lag Shield Anchor Short Zinc Alloy 1/2" Hole
- (Qty 1000) 5/16" x 1-3/4" Lag Shield Anchor Long Zinc Alloy 1/2" Hole
- (Qty 250) 5/16" x 1-3/4" Lag Shield Anchor Long Zinc Alloy 1/2" Hole
- (Qty 100) 5/16" x 1-3/4" Lag Shield Anchor Long Zinc Alloy 1/2" Hole
- (Qty 25) 5/16" x 1-3/4" Lag Shield Anchor Long Zinc Alloy 1/2" Hole
- (Qty 10) 5/16" x 1-3/4" Lag Shield Anchor Long Zinc Alloy 1/2" Hole
- (Qty 250) 3/8" x 2-1/2" Lag Shield Anchor Long Zinc Alloy 5/8" Hole
- (Qty 100) 3/8" x 2-1/2" Lag Shield Anchor Long Zinc Alloy 5/8" Hole
- (Qty 25) 3/8" x 2-1/2" Lag Shield Anchor Long Zinc Alloy 5/8" Hole
- (Qty 10) 3/8" x 2-1/2" Lag Shield Anchor Long Zinc Alloy 5/8" Hole
- (Qty 1000) 1/4" x 1-1/2" Lag Shield Anchor Long Zinc Alloy 1/2" Hole
- (Qty 250) 1/4" x 1-1/2" Lag Shield Anchor Long Zinc Alloy 1/2" Hole
- (Qty 100) 1/4" x 1-1/2" Lag Shield Anchor Long Zinc Alloy 1/2" Hole
- (Qty 25) 1/4" x 1-1/2" Lag Shield Anchor Long Zinc Alloy 1/2" Hole
- (Qty 10) 1/4" x 1-1/2" Lag Shield Anchor Long Zinc Alloy 1/2" Hole
- 1/4" Long Size Lag-Shield Anchor 1/2" Drill Size 50ct Fastenal 51212 1-1/2" long - 1/4" Long Size Lag-Shield Anchor 1/2" Drill Size 50ct Fastenal 51212 1-1/2" long. Condition is New. Shipped with USPS Priority Mail Padded Flat Rate Envelope.
- (Qty 100) 1/2" x 3" Lag Shield Anchor Long Zinc Alloy 3/4" Hole
- (Qty 25) 1/2" x 3" Lag Shield Anchor Long Zinc Alloy 3/4" Hole
- (Qty 10) 1/2" x 3" Lag Shield Anchor Long Zinc Alloy 3/4" Hole
- Star 5/16 Short Lag Shields New Lot Of 90 Free Shipping Via Priority Mail - ORIGINAL BOXES NOT INCLUDED.
- Everbilt 3/8 in. x 1-3/4 in. Zinc-Alloy Short Lag Shield (2-Pieces) - Everbilt 3/8 in. Zinc-Alloy Short Lag Shield (2-Pieces). These lag or expansion shields are used for fastening lag screws into fastening into wood and concrete. The expansion shield acts as an anchoring point into a concrete slab or foundation, expanding when the screw threads are engaged during installation.
- 3/8 inch Lag Shield Masonry Expansion Anchors Zinc Plated Steel - Pick Size+QTY - Fastener Type: Lag Shield Masonry Anchor. Expansion Shield Anchors for Lag Screws in Concrete, Brick, and Block Applications. Zinc Plated Lag Shield Expansion Anchors. An Expansion Shield Anchor is made for use with Lag screws and are designed to anchor into concrete, brick, and block.
- 5/8" x 3 1/2" Lag Screw Expansion Shield Long Zinc Alloy - Fastener Type: Lag Screw Expansion Shield Long. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Material: Zinc Alloy. Finish: Plain Finish (No Plating). PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
- Star 1/4 Short Lag Shield - 1/2" Drill (50 pcs) - Star 1/4 Short Lag Shield. 1/2" Drill.
- Drop-In Anchor 372086 1/4 Inch Hold up to 495 Pounds Capacity for Concrete - Model Number: 372086.
- 1/2” Lag Shields For Lag Screws Bolts Expansion Anchor 3” Long (25) - 25 pieces (1 box)1/2” Lag Shields For Lag Screws Bolts Expansion Anchor 3” Long (25)length is 3 inches Drill size 3/4”Made in USA
- 5/16" Expansion Shield Anchor Double Zinc Alloy - Fastener Type: Expansion Shield Anchor Double. FASTENER SPECIFICATIONS. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Material: Zinc Alloy. Finish: Plain Finish (No Plating).
- 1/4" Expansion Shield Anchor Double Zinc Alloy - Fastener Type: Expansion Shield Anchor Double. FASTENER SPECIFICATIONS. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Material: Zinc Alloy. Finish: Plain Finish (No Plating).
- 3/8" x 2 1/2" Lag Screw Expansion Shield Short Zinc Alloy - Fastener Type: Lag Screw Expansion Shield Long. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Material: Zinc Alloy. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
- 1/2" x 2" Lag Screw Expansion Shield Short Zinc Alloy - Fastener Type: Lag Screw Expansion Shield Short. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Material: Zinc Alloy. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
- 1/4" x 1 1/2" Lag Screw Expansion Shield Long Zinc Alloy - Fastener Type: Lag Screw Expansion Shield Long. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Material: Zinc Alloy. Finish: Plain Finish (No Plating). PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
- 5/16" x 1 1/4" Lag Screw Expansion Shield Short Zinc Alloy - Fastener Type: Lag Screw Expansion Shield Short. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Material: Zinc Alloy. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
- 5/16" x 1 3/4" Lag Screw Expansion Shield Long Zinc Alloy - Fastener Type: Lag Screw Expansion Shield Long. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Material: Zinc Alloy. Finish: Plain Finish (No Plating). PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
- 3/8" x 1 3/4" Lag Screw Expansion Shield Short Zinc Alloy - Fastener Type: Lag Screw Expansion Shield Short. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Material: Zinc Alloy. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.