Fully Threaded Rod, M6-1.0 Thread Pitch, 30Mm Length 304 Stainless Steel - Size: Thread Dia.: M6; Thread Pitch: 1.0mm; Total Length: 30mm / 1.18". Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for the assembly of components. The difference between rods and studs is length: In general, a stud is up to 1 foot long, and a rod is more than 1 foot long.
Metal Threaded Rod Fully Threaded Rod Replacement Stainless Steel M10 Threaded - 3 Pcs Tongs for Ice Cube Portable Scoop Mini Coffee Serving Toaster Salad. -Practical threaded rod is used for anchor bolts, hangers, u bolts and many other uses. 1 x Threaded Rod. 2 Pcs M Work Knitting Supplies Automatic Threader DIY Sewing.
Simpson Strong-Tie CNW1/2 - 1/2" Coupler Nut w/ Witness Hole - The Witness Hole. Tighten the two rods until each all-thread rod is visible in the Witness Hole. Any portion of thread visible in the Witness Hole is a correct installation. The CNW exceeds the specified minimum tensile capacity of corresponding ASTM A36 bolts and threaded rod.
Steel Fully Threaded Rod, Zinc Plated, 5/8"-11 Thread Size, 12" Length, Right H - Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components. The difference between rods and studs is length: In general, a stud is up to 1 foot long, and a rod is more than 1 foot long.
Threaded Rod Long Stainless Steel for Hangers Tooth Stick Metal - Practical threaded rod can make the fasteners that screw into threaded nuts or tapped holes, allowing for the assembly of components. -The steel threaded rod has good toughness, will not easy to get rust, deform or break.
18-8 Stainless Steel Fully Threaded Rod, 3/8"-16 Thread Size, 36" Length - Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components. The difference between rods and studs is length: In general, a stud is up to 1 foot long, and a rod is more than 1 foot long.
1/2"-13 X 36" Blue Tip 316 Stainless Steel Threaded Rod - Hello, Up for sale is a new, open box 1/2"-13 x 36" blue tip threaded rod in 316 stainless steel. Winning buyer has 24 hours to pay with Paypal. Item ships via USPS Ground. All sales are final. If you have any questions, please reach out. Thanks for looking.
M12 Threaded Bar 200mm Mild Steel Zinc Plated Rod Studding 12 Lengths - M12 Threaded Bar 12 Lengths Of 200mm Long Mild Steel Zinc PlatedThese are cut to length so will have one cut end and one machined end and will be minimum of 200mm in length(ranging to 220mm approximately)bar may have small signs of wear due to storage but no damage to thread.Other sizes from M10 up to M32 available upon request or see my other listings
5-Pack National Threaded Rod Coupler N182-717 5/8"-11 Zinc plated - 5-Pack National Threaded Rod Coupler N182-717 5/8"-11 Zinc plated PRODUCT DESCRIPTION Designed to connect 2 pieces of threaded rod. Hexagonal shape allows wrench or other tool to tighten or loosen product. Threads are UNC 2A. Made of steel. Zinc plated. Features: Type: Couplers For Coarse Threaded Rod Stock Number: N182-717 Finish: Zinc plated Size: 5/8"-11 Material: Steel SWL: 4500 lbs ♥♥♥ CLICK HERE TO SEE MY OTHER ITEMS FOR MORE AMAZING DEALS!!!! ♥♥♥ ? Copyright . All rights reserved.
Stainless foot M12x150 80mm base has rubber pad + insert 40x40x1.5mm - Set of 4 - Load capacity 2000kg per set of 4 (500kg per one foot + insert). Design and patent protected foot. Vulcanized FDA-approved, anti-vibration and anti-slip rubber pad under the base. Sturdy insert made of nylon with threads in stainless steel (material no. ).
Simpson Strong-Tie ATR3/4X24 - 3/4" x 24" All-Thread Rod Plain Carbon Steel - Fewer anchor bolts and fasteners, along with easy access to the top and bottom of the wall, result in more efficient installation. u = 58 ksi and not to exceed 80 ksi. Design procedures that account for cumulative overturning.
Simpson Strong-Tie CNW7/8 - 7/8" Coupler Nut w/ Witness Hole - The Witness Hole. Tighten the two rods until each all-thread rod is visible in the Witness Hole. Any portion of thread visible in the Witness Hole is a correct installation. The CNW exceeds the specified minimum tensile capacity of corresponding ASTM A36 bolts and threaded rod.
Type 316 Stainless Steel Fully Threaded Rod, 7/8" -9 Thread Size, 18" Length Rig - Our type 316 stainless steel threaded rod is an excellent multi-purpose all-thread that can be used for hanging fixtures, sprinklers, lights and much more. Material Type 316 Stainless Steel Type 304 Stainless Steel Grade 55 Steel Grade 55 Steel Grade B7 Steel Grade A307 Steel.
BSW x 18" Self Colour Grade 4.8 All Threaded Bar Rod Din 976 - BSW Allthread Studding can be uséd in the following applications 36 x 3/16 BSW M.S Allthread Self Colour x 18". 36 X 1/4 BSW M.S. Allthread Self Colour x 18". 36 X 5/16 BSW M.S. Allthread Self Colour x 18".
Stainless Steel 3/8"-16 Thread Fully Threaded Rod 12" Length Long Threaded Screw - Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components. They have threads along part or all of their length. Those that are partially threaded have equal or unequal thread lengths on one or both ends.
Small Parts 18-8 Stainless Steel Fully Threaded Rod, 3/8"-16 Thread Size, 36" Le - Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components. The difference between rods and studs is length: In general, a stud is up to 1 foot long, and a rod is more than 1 foot long.
GRAINGER APPROVED U55070.025.2400 Threaded Rod,316 SS,1/4-20x2 ft PK 10 - GRAINGER APPROVED U55070.025.2400. Grainger Part #:19NN99-10. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
Steelworks 11016 Threaded Rod, 3/8 X 12-Inch - Item model number 11016. Part Number 11016. Thread Style Fully Threaded. 3/8"-16 x 12" Threaded Steel Rod. Thread Coverage Fully Threaded. Fastener Type Fully Threaded. Coarse Threaded. This product is 1/8" x 36" Round Steel Rod, Cold Rolled Steel, Weldable.
Spool Of Thread For Use With Stihl Autocut 25-2 4002-713-3017 Reliable Use - For use with STIHL Autocut 25-2 and 4002-713-3017. For STIHL FS 40, FS 44, 48, 52, 55, 56, 62, 66, 70, 74, 76, 80, 81, 83, 85, 86, 88, 90, F90, 96, 100, 106, 108,100RX, 110, 120, 130, 200, 250, 350, 450, 550, KM 55, 85, 90, FR106, FR108 110, 130, & FS-KM and many more.
1 X Merriway BH03017 Fully Threaded Studding Rod Bar, M10 x 300mm, - This high-quality Merriway BH03017 fully threaded studding rod bar is a must-have for anyone in need of reliable and durable threaded rods. Measuring at M10 x 300mm, this rod is perfect for a variety of applications in the business, office, and industrial sectors. With its fully threaded design and top-notch manufacturing, this Merriway studding rod bar is built to last. Whether you need it for fasteners and hardware or any other threaded rods and threaded studs, this product is sure to get the job done. So don't hesitate – add this Merriway BH03017 fully threaded studding rod bar to your collection today!
Stainless Steel Lead Screw 8mm Threaded Rod Brass Nut 100-500mm Length - Adjustable 2 Point Hunting Rifle Sling - Outdoor Tactical Gun Strap Belt. - Length: 100mm, 150mm, 200mm, 250mm, 300mm, 330mm, 350mm, 400mm, 500mm (Optional). 10x Fishing Rod Ties Holder Strap Tackle Band Wrap Belt Fastener - Reusable.
10-32 UNF PLATED STUD x 1" LONG, SCREW, THREAD, STUDDING - Made in the United Kingdom, it features a 10-32 thread size and a durable plated finish. Its sturdy construction and precise thread size ensure a tight and stable connection, while its simple design makes it easy to install and use.
ForgeFix Threaded Rod Zinc Plated M8 x 1m Single - These Forgefix Threaded rods are bright Zinc Plated for increased corrosion resistance, and provide a cost effective fastening solution for many varied applications. They can be used with many other products including Drop In Anchors and Masonry Anchor Shields.
8mm Stainless Steel Lead Screw Acme Threaded Rod Brass Nut 100-500mm - Length: 100mm, 150mm, 200mm, 250mm, 300mm, 330mm, 350mm, 400mm, 500mm (Optional). 3Pcs Integrated Transparent Dart Shaft Flights - Anti-Break Standard Shape. Kitchen Gas Range Stove Top Burner Cover Guard Protector Reusable Non-stick Line.
3D Printer For Stepper Motor Lead Screw Rod 8mm Threaded Trapezoidal Nut Kit - Product Features: - Stainless steel material, not rust, durable. - Easy to install and convenient to use, no need to process. - Fine producing and practical. - A great lead screw rod replacement for 3D printer. - Corrosion resistance, high temperature resistance.
18-8 Stainless Steel Fully Threaded Rod, 3/8"-16 Thread Size, 36" Length, Right - Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components. The difference between rods and studs is length: In general, a stud is up to 1 foot long, and a rod is more than 1 foot long.
GRAINGER APPROVED U20365.100.3600 Threaded Rod,Steel,1-12x3 ft PK 3 - GRAINGER APPROVED U20365.100.3600. Grainger Part #:19NR55-3. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED U55070.016.2400 Threaded Rod,316 SS,#8-32x2 ft PK 10 - GRAINGER APPROVED U55070.016.2400. Grainger Part #:19NN87-10. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED M20170.100.1000 Threaded Rod,Steel,M10-1.5x1m PK 10 - GRAINGER APPROVED M20170.100.1000. Grainger Part #:25DL74-10. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
Fischer Backplate With M8 Connector Nut For Threaded Bar Box of 25 - New old stock see photos. This Fischer Backplate comes with an M8 Connector Nut, making it perfect for use with threaded bars. The backplate is designed to be durable and reliable, ensuring that your fasteners and hardware are securely held in place. Constructed by Fischer, a well-known brand in the industry, this backplate is made to the highest standards of quality and performance. Measuring 80mm in length, it is suitable for a range of applications in the business, office, and industrial sector. Whether you need to fasten items together or create a sturdy frame, this backplate is the perfect choice.
Qt 6 Hilti Anchor Rod Threaded Stainless Steel M16x125/60 HAS TZ M16 - This high-quality anchor rod is a must-have for any construction project. Made from durable stainless steel, it provides reliable and long-lasting support. The threaded design allows for easy installation, and the M16 thread size ensures a secure fit. With a brand name like Hilti and specific details like the manufacturer part number (HAS TZ M16), you can trust that this anchor rod is of the highest quality. Its type (Anchor Rod) and material (Stainless Steel) make it perfect for a variety of applications. Whether you're working on a commercial or residential project, this threaded rod will get the job done.
Studding Connectors Zinc Plated Class 6 DIN6334 M6-M24 18mm-72mm Box of 10 - Introducing our Studding Connectors, made of high-quality zinc plated Class 6 material. These connectors come in various models and are available in M6-M24 thread sizes. Our connectors are durable and can withstand high-pressure conditions, making them perfect for industrial and business applications. Not only that, but our connectors also boast a hex end type, which provides a secure grip during installation. These connectors are sold in packs of 10, making it easy to purchase the quantity you need. These connectors are perfect for those looking for reliable, long-lasting connectors for their industrial needs.
Spool Of Thread For Use With Stihl Autocut 25-2 4002-713-3017 Reliable Use - For use with STIHL Autocut 25-2 and 4002-713-3017. For STIHL FS 40, FS 44, 48, 52, 55, 56, 62, 66, 70, 74, 76, 80, 81, 83, 85, 86, 88, 90, F90, 96, 100, 106, 108,100RX, 110, 120, 130, 200, 250, 350, 450, 550, KM 55, 85, 90, FR106, FR108 110, 130, & FS-KM and many more.
Threaded Rod Replacement for Anchor Bolts Long Metal Fully Feet - Practical threaded rod can make the fasteners that screw into threaded nuts or tapped holes, allowing for the assembly of components. -The steel threaded rod has good toughness, will not easy to get rust, deform or break.
Threaded Rod for Clamps Extra Long Stainless Steel Fully Metal Screw - Practical threaded rod is used for anchor bolts, hangers, u bolts and many other uses. 1 x Threaded Rod. -With clear and neat threads, without burrs, the long rod provides uniform force and easy to install.
8mm Stainless Steel Trapezoidal Lead Screw with Brass Nut - ACME Threaded Rod - Phonak ReSound Hearing Aid Waterproof Wax Guards | Cerustop Accessory. Folding Stainless Steel Pocket Hair Comb - Redshell Flick Design. - Lead of Thread: 8mm. - Thread Pitch: 2mm. 20 Tune C Key 10 Hole Gold Harmonica with Storage Case Mouth Organ.
Twisted Iron Bar - 12mm - 1 meter long - self colour - Elevate your DIY projects and business ventures with this 12mm twisted iron bar that measures one meter long. The bar boasts of a self-colour finish and is perfect for various fastening and hardware needs. Its unique twist design adds a touch of character to any project while providing structural support. This versatile bar falls under the categories of Business, Office & Industrial and Fasteners & Hardware, making it a valuable addition to any workshop or storefront. Whether you’re building furniture, creating bespoke fixtures, or constructing machinery, this twisted iron bar is sure to impress.
GRAINGER APPROVED U20300.019.2400 Threaded Rod,Steel,#10-24x2 ft PK 10 - GRAINGER APPROVED U20300.019.2400. Grainger Part #:19NR32-10. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
BestDuplicator 1 to 5 DVD Duplicator Samsung Super WriteMaster M Disc DVD Multi - This DVD duplicator is a top-of-the-line machine that can quickly and easily duplicate up to 5 DVDs at once. It features a Samsung Super WriteMaster M Disc DVD Multi and is perfect for anyone in the business and industrial world who needs fast and reliable duplication capabilities. The machine is made with high-quality materials and is built to last.
18-8 Stainless Steel Fully Threaded Rod, 3/8"-16 Thread Size, 36" Length, Right - Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components. The difference between rods and studs is length: In general, a stud is up to 1 foot long, and a rod is more than 1 foot long.
Threaded Screw Stainless Steel Long Rod for Hangers Metal Fully - Practical threaded rod can make the fasteners that screw into threaded nuts or tapped holes, allowing for the assembly of components. -The steel threaded rod has good toughness, will not easy to get rust, deform or break.
Threaded Screw Stainless Steel Extra Long Rod for Hangers Metal - Practical threaded rod is used for anchor bolts, hangers, u bolts and many other uses. 1 x Threaded Rod. -With clear and neat threads, without burrs, the long rod provides uniform force and easy to install.
1m 100cm 1000mm Fully Threaded Stainless Steel SS Rod Studding Metric M6,8,10,12 - New Unused Threaded Rod. Yes, as long as the order hasn't been 'dispatched'. All manufacturers warranties, obligations and liabilities are now void. Cash Only on Collection. However if you miss this cut off then 1 of 2 things will happen.
(10 Pack) Hilti HAS-E-55 Anchor Rods 218800  3/4" x 11" - This pack of Hilti HAS-E-55 Anchor Rods is a reliable solution for all your fastening needs. With a length of 4 inches and a system of measurement in inches, these rods are suitable for use in a variety of applications. The brand name Hilti ensures high quality and durability of the product. These anchor rods belong to the category of Threaded Rods & Threaded Studs, Fasteners & Hardware, and Business & Industrial, making them ideal for use in a commercial or industrial setting. The model number of 2198001 and the dimensions of 3/4" x 11" provide all the necessary information you need to make an informed purchase.
GRAINGER APPROVED M55070.050.1000 Threaded Rod,A4 SS,M5-0.8x1m PK 10 - GRAINGER APPROVED M55070.050.1000. Grainger Part #:25DM77-10. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED U22182.112.3600 THRD B7 YP UNC,1-1/8-7x3 ft PK 5 - GRAINGER APPROVED U22182.112.3600. THRD B7 YP UNC,1-1/8-7x3 ft PK 5. Grainger Part #:19NN04-5. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order.
High Precision 8mm Threaded For Stepper Motor Lead Screw for 3D Printer - - Product Features: - Stainless steel material, not rust, durable. - Easy to install and convenient to use, no need to process. - Fine producing and practical. - A great lead screw rod replacement for 3D printer. - Corrosion resistance, high temperature resistance.
Simpson Strong-Tie CNW5/8 - 5/8" Coupler Nut w/ Witness Hole - The Witness Hole. Tighten the two rods until each all-thread rod is visible in the Witness Hole. Any portion of thread visible in the Witness Hole is a correct installation. The CNW exceeds the specified minimum tensile capacity of corresponding ASTM A36 bolts and threaded rod.
Simpson Strong-Tie ATR1/2X18 - 1/2" x 18" All-Thread Rod Plain Carbon Steel - Fewer anchor bolts and fasteners, along with easy access to the top and bottom of the wall, result in more efficient installation. u = 58 ksi and not to exceed 80 ksi. Design procedures that account for cumulative overturning.
1-1/4"-7 X 7" Threaded Rod Stud 316 Stainless Steel 10 Pack - Hello, Up for sale are new 1-1/4"-7 x 7" fully threaded rod studs in 316 stainless steel. Winning buyer has 24 hours to pay with Paypal. Item ships via UPS. All sales are final. Any questions please reach out. Thanks for looking.
GRAINGER APPROVED M20230.060.1000 Threaded Rod,Steel,M6-1.0x1m PK 10 - GRAINGER APPROVED M20230.060.1000. Grainger Part #:19NN18-10. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
Alloy Steel Fully Threaded Rod, Meets ASTM A193 Grade B7, 1"-8 Thread Size, 36" - This fully threaded rod is made of alloy steel, has 1"-8 right-hand threads, and is 36" long. Alloy steel is often used in applications where strength is the primary consideration. Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components.
Threaded Rods M16 x 300mm Pack of 5" - 5 lengths of M16 x 300 A4 cut Allthread. Pre-Cut to 300mm Length. Product contents Collections from our trade counters is possible. This does not effect your statutory rights. Ready Chamfered to Accept Nut.
Easyfix Threaded Rods A2 Stainless Steel M12 Weatherproof 1000mm Pack Of 5 - Bolt Size: M12. A2 stainless steel. Fully threaded. Weatherproof: Weatherproof. Construction Material (Fixings): A2 Stainless Steel. Type: Threaded Rods. Drill bits,Sanding sheets, Multi-tool cutting blades, Manuals, More than one Jigsaw/Reciprocating saw blade.
(10-Pk) Hilti HAS Threaded Anchor Rod Carbon Steel 1/2" x8" 385425 NUTS WASHERS - Introducing a pack of 10 high-quality threaded anchor rods from Hilti. These carbon steel rods are 8 inches in length, and feature a diameter of 1/2 inch. Each pack comes complete with nuts and washers to ensure a secure fit for your application. Ideal for use in construction, these threaded rods are perfect for a variety of fastening needs. Trust Hilti for your next project and get the job done right. NEW - (10-Pk) Hilti HAS 5.8 Threaded Anchor Rod Carbon Steel 1/2" x 8" #385425 WITH NUTS & WASHERS (10-Pk) 19.95
GRAINGER APPROVED M20220.200.1000 Threaded Rod,Steel,M20-2.5x1m PK 6 - GRAINGER APPROVED M20220.200.1000. Grainger Part #:25DL92-6. GRAINGER APPROVED U50450.011.0001 Ext TthLk,#4,Brnz,0.26x0.018in,100PK. GRAINGER APPROVED ZUSAESR-332 EPDM Sheet,L 36 in,Black. Diversion contrary to U.S. law is prohibited.
GRAINGER APPROVED M20300.070.1000 Threaded Rod,Steel,M7-1.0x1m PK 10 - GRAINGER APPROVED M20300.070.1000. Grainger Part #:25DM27-10. GRAINGER APPROVED M39070.100.0030 Pin,Steel,10mm dia.,PK5. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order.
Simpson Strong-Tie ATR7/8X48 - 7/8" x 48" All-Thread Rod Plain Carbon Steel - Fewer anchor bolts and fasteners, along with easy access to the top and bottom of the wall, result in more efficient installation. u = 58 ksi and not to exceed 80 ksi. Design procedures that account for cumulative overturning.
18-8 Stainless Steel Fully Threaded Rod, 3/8"-16 Thread Size, 36" Length, Right - Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components. The difference between rods and studs is length: In general, a stud is up to 1 foot long, and a rod is more than 1 foot long.
ForgeFix Threaded Rod Zinc Plated M20 x 1m Single - These Forgefix Threaded rods are bright Zinc Plated for increased corrosion resistance, and provide a cost effective fastening solution for many varied applications. They can be used with many other products including Drop In Anchors and Masonry Anchor Shields.
Simpson Strong-Tie ATR3/8X12 - 3/8 x 12" All-Thread Rod Plain Carbon Steel - Fewer anchor bolts and fasteners, along with easy access to the top and bottom of the wall, result in more efficient installation. u = 58 ksi and not to exceed 80 ksi. Design procedures that account for cumulative overturning.
3D Printer Screw Rod Nut for Stepper Motor - Trapezoidal Lead Screw 8mm - NEW Denshine Dental Low Speed Handpiece Contra Angle Push Button Autoclavable. FDA Grey Dental Composite Gun Dispenser Applicator Tool for Unidose Tip. Variable Speed Tool Device Handheld Massager Anti Cellulite Professional Fitness.
GRAINGER APPROVED U20170.037.2400 Threaded Rod,Steel,3/8-16x2 ft PK 10 - GRAINGER APPROVED U20170.037.2400. Grainger Part #:19NN42-10. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
8mm Trapezoidal Lead Screw Rod w/ Nut for Stepper Motor 3D Printer - Tai Chi Kung Fu Bamboo Silk Fan Right Hand Wushu Dance Training Practice. High-Quality Dental Irrigation Syringe Set - 4 Disposable Curved Tip - Oral. Carbon Fiber Follow Focus Rod Rail Tube - Lengths: 15/20/25/30/40cm - 15mm Dia.
8mm Threaded Rod Trapezoidal Lead Screw + Nut for 3D Printer For Stepper Motor - NEW Denshine Dental Low Speed Handpiece Contra Angle Push Button Autoclavable. FDA Grey Dental Composite Gun Dispenser Applicator Tool for Unidose Tip. Thread Pitch: 2mm. Lead of Thread: 8mm. Variable Speed Tool Device Handheld Massager Anti Cellulite Professional Fitness.
8mm For Stepper Motor Lead Screw Rod with Trapezoidal Thread for 3D Printer - 2PCS Wall Mounted Katana Sword Hook Rack Display Stand Black. Thread Pitch: 2mm. Stainless Steel Ice Cream Scoop Set Trigger Spoon Anti-rust Silver XYZBITS. Lead of Thread: 8mm. NAB Reel Hub Adapters for 10 Tape Recorders Gold Openers.
3/8"-16 x 18" Zinc Plated Threaded Rod 10 Pcs. - This set of 10 threaded rods measure 3/8"-16 in thread size and 18" in length. Made of durable steel material, it is fully threaded and finished with a zinc plating. These rods are perfect for fastening applications in various industries, such as construction, mechanics, and DIY projects.
Easy Install Spool Of Thread For Use With Stihl Autocut 25-2 4002-713-3017 - For use with STIHL Autocut 25-2 and 4002-713-3017. For STIHL FS 40, FS 44, 48, 52, 55, 56, 62, 66, 70, 74, 76, 80, 81, 83, 85, 86, 88, 90, F90, 96, 100, 106, 108,100RX, 110, 120, 130, 200, 250, 350, 450, 550, KM 55, 85, 90, FR106, FR108 110, 130, & FS-KM and many more.
ForgeFix Threaded Rod Stainless M8 x 1m Single - These Forgefix Threaded Rods are made of A2 stainless steel, which will not corrode, rust or stain from water. This makes them ideally suited for corrosive and coastal applications as well as many other varied applications.
ForgeFix Threaded Rod Zinc Plated M6 x 1m Single - These Forgefix Threaded rods are bright Zinc Plated for increased corrosion resistance, and provide a cost effective fastening solution for many varied applications. They can be used with many other products including Drop In Anchors and Masonry Anchor Shields.
ForgeFix Threaded Rod Stainless M6 x 1m Single - These Forgefix Threaded Rods are made of A2 stainless steel, which will not corrode, rust or stain from water. This makes them ideally suited for corrosive and coastal applications as well as many other varied applications.
ForgeFix Threaded Rod Stainless M10 x 1m Single - These Forgefix Threaded Rods are made of A2 stainless steel, which will not corrode, rust or stain from water. This makes them ideally suited for corrosive and coastal applications as well as many other varied applications.
ForgeFix Threaded Rod Stainless M12 x 1m Single - These Forgefix Threaded Rods are made of A2 stainless steel, which will not corrode, rust or stain from water. This makes them ideally suited for corrosive and coastal applications as well as many other varied applications.
ForgeFix Threaded Rod Zinc Plated M12 x 1m Single - These Forgefix Threaded rods are bright Zinc Plated for increased corrosion resistance, and provide a cost effective fastening solution for many varied applications. They can be used with many other products including Drop In Anchors and Masonry Anchor Shields.
GRAINGER APPROVED U51067.025.2400 Threaded Rod,18-8 SS,1/4-28x2 ft PK 10 - GRAINGER APPROVED U51067.025.2400. Grainger Part #:10W694-10. GRAINGER APPROVED 5JJT6 O-Ring Asst,SFS,Urethane,35 Pc,7Sz. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order.
GRAINGER APPROVED M55070.100.1000 Threaded Rod,A4 SS,M10-1.5x1m PK 2 - GRAINGER APPROVED M55070.100.1000. Grainger Part #:25DM80-2. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED M20230.180.1000 Threaded Rod,Steel,M18-2.5x1m PK 3 - GRAINGER APPROVED M20230.180.1000. Grainger Part #:25DM08-3. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED M51070.040.1000 Threaded Rod,A2 SS,M4-0.7x1m PK 10 - GRAINGER APPROVED M51070.040.1000. Grainger Part #:25DM53-10. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED M55070.040.1000 Threaded Rod,A4 SS,M4-0.7x1m PK 10 - GRAINGER APPROVED M55070.040.1000. Grainger Part #:25DM76-10. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED U55067.025.3600 Threaded Rod,316 SS,1/4-28x3 ft PK 6 - GRAINGER APPROVED U55067.025.3600. Grainger Part #:29DT92-6. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED M20220.100.1000 Threaded Rod,Steel,M10-1.5x1m PK 10 - GRAINGER APPROVED M20220.100.1000. Grainger Part #:25DL87-10. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED M20220.060.1000 Threaded Rod,Steel,M6-1.0x1m PK 10 - GRAINGER APPROVED M20220.060.1000. Grainger Part #:25DL85-10. GRAINGER APPROVED 6864 Hose Clamp,2-5/16 to 4-1/2In,SAE 64,PK10 PK 6. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order.
GRAINGER APPROVED U51067.031.1200 Threaded Rod,18-8 SS,5/16-24x1 ft PK 10 - GRAINGER APPROVED U51067.031.1200. Grainger Part #:10W695-10. GRAINGER APPROVED 6864 Hose Clamp,2-5/16 to 4-1/2In,SAE 64,PK10 PK 6. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order.
GRAINGER APPROVED U22180.062.2400 Threaded Rod,B7 Alloy Steel,5/8-11x2 ft PK 10 - GRAINGER APPROVED U22180.062.2400. Grainger Part #:19NM77-10. GRAINGER APPROVED U51450.011.0001 Split Lock Washer,Bolt #4,18-8 SS,PK50 PK 10. Threaded Rod,B7 Alloy Steel,5/8-11x2 ft PK 10. Diversion contrary to U.S. law is prohibited.
GRAINGER APPROVED U22170.043.3600 Threaded Rod,B7,Plain,7/16-20x3 ft PK 6 - GRAINGER APPROVED U22170.043.3600. Grainger Part #:19NT55-6. GRAINGER APPROVED U51450.011.0001 Split Lock Washer,Bolt #4,18-8 SS,PK50 PK 10. Threaded Rod,B7,Plain,7/16-20x3 ft PK 6. Diversion contrary to U.S. law is prohibited.
GRAINGER APPROVED M20300.240.1000 Threaded Rod,Steel,M24-3.0x1m PK 3 - GRAINGER APPROVED M20300.240.1000. Grainger Part #:25DM36-3. GRAINGER APPROVED U51450.011.0001 Split Lock Washer,Bolt #4,18-8 SS,PK50 PK 10. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order.
GRAINGER APPROVED U20365.050.2400 Threaded Rod,Carbon Steel,1/2-20x2 ft PK 10 - GRAINGER APPROVED U20365.050.2400. Grainger Part #:4FGH9-10. GRAINGER APPROVED U51450.011.0001 Split Lock Washer,Bolt #4,18-8 SS,PK50 PK 10. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order.
GRAINGER APPROVED U51067.037.2400 Threaded Rod,18-8 SS,3/8-24x2 ft PK 10 - GRAINGER APPROVED U51067.037.2400. Grainger Part #:10W698-10. GRAINGER APPROVED U51450.011.0001 Split Lock Washer,Bolt #4,18-8 SS,PK50 PK 10. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order.
GRAINGER APPROVED M22100.100.1000 Threaded Rod,Steel,M10-1.5x1m PK 6 - GRAINGER APPROVED M22100.100.1000. Grainger Part #:38DL89-6. GRAINGER APPROVED 5772 Hose Clamp,3 to 5 In,SAE 72,SS,PK10 PK 6. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order.
GRAINGER APPROVED M20230.080.1000 Threaded Rod,Steel,M8-1.25x1m PK 10 - GRAINGER APPROVED M20230.080.1000. Grainger Part #:19NN19-10. GRAINGER APPROVED 5772 Hose Clamp,3 to 5 In,SAE 72,SS,PK10 PK 6. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order.
GRAINGER APPROVED U55067.025.1200 Threaded Rod,316 SS,1/4-28x1 ft PK 10 - GRAINGER APPROVED U55067.025.1200. Grainger Part #:19NL69-10. GRAINGER APPROVED 5772 Hose Clamp,3 to 5 In,SAE 72,SS,PK10 PK 6. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order.
GRAINGER APPROVED U20360.050.2400 Threaded Rod,Carbon Steel,1/2-20x2 ft PK 10 - GRAINGER APPROVED U20360.050.2400. Grainger Part #:4FGU1-10. GRAINGER APPROVED 5772 Hose Clamp,3 to 5 In,SAE 72,SS,PK10 PK 6. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order.
GRAINGER APPROVED U20365.025.3600 Threaded Rod,Steel,1/4-28x3 ft PK 10 - GRAINGER APPROVED U20365.025.3600. Grainger Part #:19NT07-10. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED U20360.056.1200 Threaded Rod,Steel,9/16-18x1 ft PK 6 - GRAINGER APPROVED U20360.056.1200. Grainger Part #:19NR20-6. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED U20360.031.1200 Threaded Rod,Steel,5/16-24x1 ft PK 10 - GRAINGER APPROVED U20360.031.1200. Grainger Part #:19NM71-10. GRAINGER APPROVED 861-082 Nipple,1/2 X 4", PVC PK 10. GRAINGER APPROVED 460-001GR Nipple,Red Brass,1/8 x Close,Threaded PK 10. Diversion contrary to U.S. law is prohibited.
GRAINGER APPROVED U22171.087.3600 Threaded Rod,Steel,7/8-14x3 ft PK 5 - GRAINGER APPROVED U22171.087.3600. Grainger Part #:25DL49-5. GRAINGER APPROVED 460-001GR Nipple,Red Brass,1/8 x Close,Threaded PK 10. GRAINGER APPROVED 861-082 Nipple,1/2 X 4", PVC PK 10. Diversion contrary to U.S. law is prohibited.
GRAINGER APPROVED U20300.016.2400 Threaded Rod,Steel,#8-32x2 ft PK 10 - GRAINGER APPROVED U20300.016.2400. Grainger Part #:19NR30-10. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED M20300.100.1000 Threaded Rod,Steel,M10-1.5x1m PK 10 - GRAINGER APPROVED M20300.100.1000. Grainger Part #:25DM29-10. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED U22182.037.1200 THRD B7 YP UNC,3/8-16x1 ft PK 10 - GRAINGER APPROVED U22182.037.1200. THRD B7 YP UNC,3/8-16x1 ft PK 10. Grainger Part #:19NM90-10. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order.
GRAINGER APPROVED M20360.080.1000 Threaded Rod,Steel,M8-1.0x1m PK 10 - GRAINGER APPROVED M20360.080.1000. Grainger Part #:38DK75-10. GRAINGER APPROVED 464-001BSNPGR Nipple, 3/4 x 1 3/8 In L, Red Brass PK 10. GRAINGER APPROVED U51300.016.0050 MS,#8-32,Plain,1/2"L,100PK PK 10.
GRAINGER APPROVED M51070.030.1000 Threaded Rod,A2 SS,M3-0.5x1m PK 10 - GRAINGER APPROVED M51070.030.1000. Grainger Part #:25DM52-10. GRAINGER APPROVED CSB115BW Wall Switch,15A,White,Toggle,120/277VAC. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order.
GRAINGER APPROVED U20360.037.3600 Threaded Rod,Steel,3/8-24x3 ft PK 10 - GRAINGER APPROVED U20360.037.3600. Grainger Part #:19NT29-10. GRAINGER APPROVED CSB115BW Wall Switch,15A,White,Toggle,120/277VAC. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order.
8mm Stainless Trapezoidal Rod ACME Threaded Nut for T8 Lead Screw - SLS - Product: T8 Lead Screw. NEW Denshine Dental Low Speed Handpiece Contra Angle Push Button Autoclavable. - Lead of Thread: 8mm. - Thread Pitch: 2mm. FDA Grey Dental Composite Gun Dispenser Applicator Tool for Unidose Tip.
10x Hilti HAS-TZ M10x75/30 Ø12 mm anchor rod - unused / original packaging - - Zustand „Neu: Sonstige“ Weitere Angaben finden Sie evtl. Eine Prüfung ist uns nicht möglich. Wir senden wenn möglich auch weitere Bilder. Info zum „Zustand der Ware. Sollte ein Gerät widererwarten defekt sein, sorgen wir für Ersatz (wenn verfügbar) oder erstatten Ihnen den vollen Kaufpreis.
M12 x 250mm RG M Stainless Steel Threaded Galvanised Rods, 10 Pack - 95702 - The fischer rod anchor RG M is produced from stainless steel. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in external areas.
M12 x 300mm RG M Stainless Steel Threaded Galvanised Rods, 10 Pack - 95705 - The fischer rod anchor RG M is produced from stainless steel. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in external areas.
M12 x 220mm RG M Stainless Steel Threaded Galvanised Rods, 10 Pack - 50297 - The fischer rod anchor RG M is produced from stainless steel. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in external areas.
M12 x 200mm RG M Stainless Steel Threaded Galvanised Rods, 10 Pack - 50576 - The fischer rod anchor RG M is produced from stainless steel. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in external areas.
M16 x 250mm RG M 5.8 BZP Steel Threaded Galvanised Rods, 10 Pack - 50288 - The fischer rod anchor RG M is made of zinc-plated steel with a grade of 5.8. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in internal areas.
M12 x 180mm RG M Stainless Steel Threaded Galvanised Rods, 10 Pack - 512249 - The fischer rod anchor RG M is produced from stainless steel. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in external areas.
M16 x 190mm RG M 5.8 BZP Steel Threaded Galvanised Rods, 10 Pack - 50259 - The fischer rod anchor RG M is made of zinc-plated steel with a grade of 5.8. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in internal areas.
M16 x 165mm RG M 5.8 BZP Steel Threaded Galvanised Rods, 10 Pack - 50287 - Overall Length 165mm. The fischer rod anchor RG M is made of zinc-plated steel with a grade of 5.8. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it.
M12 x 300mm RG M 5.8 BZP Steel Threaded Galvanised Rods, 10 Pack - 50285 - The fischer rod anchor RG M is made of zinc-plated steel with a grade of 5.8. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in internal areas.
M12 x 380mm RG M 5.8 BZP Steel Threaded Galvanised Rods, 10 Pack - 95720 - Overall Length 380mm. The fischer rod anchor RG M is made of zinc-plated steel with a grade of 5.8. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it.
M12 x 250mm RG M 5.8 BZP Steel Threaded Galvanised Rods, 10 Pack - 50284 - The fischer rod anchor RG M is made of zinc-plated steel with a grade of 5.8. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in internal areas.
M12 x 220mm RG M 5.8 BZP Steel Threaded Galvanised Rods, 10 Pack - 50283 - The fischer rod anchor RG M is made of zinc-plated steel with a grade of 5.8. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in internal areas.
M12 x 180mm RG M 5.8 BZP Steel Threaded Galvanised Rods, 10 Pack - 512248 - The fischer rod anchor RG M is made of zinc-plated steel with a grade of 5.8. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in internal areas.
M10 x 250mm RG M 5.8 BZP Steel Threaded Galvanised Rods, 10 Pack - 95703 - The fischer rod anchor RG M is made of zinc-plated steel with a grade of 5.8. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in internal areas.
M12 x 160mm RG M 5.8 BZP Steel Threaded Galvanised Rods, 10 Pack - 50258 - The fischer rod anchor RG M is made of zinc-plated steel with a grade of 5.8. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in internal areas.
M10 x 350mm RG M 5.8 BZP Steel Threaded Galvanised Rods, 10 Pack - 95718 - The fischer rod anchor RG M is made of zinc-plated steel with a grade of 5.8. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in internal areas.
M10 x 190mm RG M 5.8 BZP Steel Threaded Galvanised Rods, 10 Pack - 50281 - The fischer rod anchor RG M is made of zinc-plated steel with a grade of 5.8. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in internal areas.
M10 x 130mm RG M 5.8 BZP Steel Threaded Galvanised Rods, 10 Pack - 50257 - The fischer rod anchor RG M is made of zinc-plated steel with a grade of 5.8. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in internal areas.
M10 x 110mm RG M 5.8 BZP Steel Threaded Galvanised Rods, 10 Pack - 535007 - The fischer rod anchor RG M is made of zinc-plated steel with a grade of 5.8. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in internal areas.
M8 x 150mm RG M 5.8 BZP Steel Threaded Galvanised Rods, 10 Pack - 95698 - The fischer rod anchor RG M is made of zinc-plated steel with a grade of 5.8. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in internal areas.
M8 x 110mm RG M 5.8 BZP Steel Threaded Galvanised Rods, 10 Pack - 50256 - The fischer rod anchor RG M is made of zinc-plated steel with a grade of 5.8. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in internal areas.
8mm Stainless ACME Trapezoidal Lead Screw Rod + Brass Nut - SLS - Freeze Dried Chicken Cube Cat Treats - Nutrient-Rich Pet Food - Gift. High Quality Arbor Violin Bow Black Handle Brown Genuine Horsehair. Folding Stainless Steel Pocket Hair Comb - Redshell Flick Design.
T8 8mm Stainless Steel ACME Threaded Lead Screw with Brass Nut SLS - NEW Denshine Dental Low Speed Handpiece Contra Angle Push Button Autoclavable. FDA Grey Dental Composite Gun Dispenser Applicator Tool for Unidose Tip. Thread Pitch: 2mm. Variable Speed Tool Device Handheld Massager Anti Cellulite Professional Fitness.
8mm Stainless Trapezoidal Rod ACME Threaded Lead Screw Brass Nut SLS - Professional Viola Strings Full Set - 4 Pieces Universal. 5-Speed Manual Gear Shift Knob Lever for Toyota 4Runner Hilux Land Cruiser. For Water Sports Paddle Shaft Adjuster - Quick Release Clamp. Durable Canvas Roll Up Storage Bag - Organize Spanner Wrenches 6/8/10/14/25.
5/16"-24 Fully Threaded Rod Fine Thread Zinc Clear (Choose Length & Qty) - Grade A Fine Thread Fully Threaded Rods. Protective Zinc Clear coating to help prevent rust! Finish: Zinc Clear. Coarse / Fine Threads: Fine. Grade: Grade A. These are not second quality fasteners that were previously rejected or rescued from a scrap yard.
1/4"-28 Fully Threaded Rod Fine Thread Zinc Clear (Choose Length & Qty) - Grade A Fine Thread Fully Threaded Rods. Protective Zinc Clear coating to help prevent rust! Finish: Zinc Clear. Coarse / Fine Threads: Fine. Grade: Grade A. These are not second quality fasteners that were previously rejected or rescued from a scrap yard.
5/16"-18 Fully Threaded Rod Coarse Thread Zinc Clear (Choose Length & Qty) - Coarse / Fine Threads: Coarse. Grade A Coarse Thread Fully Threaded Rods. Protective Zinc Clear coating to help prevent rust! Finish: Zinc Clear. Grade: Grade A. These are not second quality fasteners that were previously rejected or rescued from a scrap yard.
1/2"-13 Fully Threaded Rod Coarse Thread Zinc Clear (Choose Length & Qty) - Coarse / Fine Threads: Coarse. Grade A Coarse Thread Fully Threaded Rods. Protective Zinc Clear coating to help prevent rust! Finish: Zinc Clear. Grade: Grade A. These are not second quality fasteners that were previously rejected or rescued from a scrap yard.
1/4"-20 Fully Threaded Rod Coarse Thread Zinc Clear (Choose Length & Qty) - Coarse / Fine Threads: Coarse. Grade A Coarse Thread Fully Threaded Rods. Protective Zinc Clear coating to help prevent rust! Finish: Zinc Clear. Grade: Grade A. These are not second quality fasteners that were previously rejected or rescued from a scrap yard.
3/8"-16 Fully Threaded Rod Coarse Thread Zinc Clear (Choose Length & Qty) - Coarse / Fine Threads: Coarse. Grade A Coarse Thread Fully Threaded Rods. Protective Zinc Clear coating to help prevent rust! Finish: Zinc Clear. Grade: Grade A. These are not second quality fasteners that were previously rejected or rescued from a scrap yard.
#12-24 Fully Threaded Rod Coarse Thread Zinc Clear (Choose Length & Qty) - Coarse / Fine Threads: Coarse. Grade A Coarse Thread Fully Threaded Rods. Protective Zinc Clear coating to help prevent rust! Finish: Zinc Clear. Grade: Grade A. These are not second quality fasteners that were previously rejected or rescued from a scrap yard.
7/16"-14 Fully Threaded Rod Coarse Thread Zinc Clear (Choose Length & Qty) - Coarse / Fine Threads: Coarse. Grade A Coarse Thread Fully Threaded Rods. Protective Zinc Clear coating to help prevent rust! Finish: Zinc Clear. Grade: Grade A. These are not second quality fasteners that were previously rejected or rescued from a scrap yard.
1/2"-20 Fully Threaded Rod Fine Thread Zinc Clear (Choose Length & Qty) - Grade A Fine Thread Fully Threaded Rods. Protective Zinc Clear coating to help prevent rust! Finish: Zinc Clear. Coarse / Fine Threads: Fine. Grade: Grade A. These are not second quality fasteners that were previously rejected or rescued from a scrap yard.
3/8"-24 Fully Threaded Rod Fine Thread Zinc Clear (Choose Length & Qty) - Grade A Fine Thread Fully Threaded Rods. Protective Zinc Clear coating to help prevent rust! Finish: Zinc Clear. Coarse / Fine Threads: Fine. Grade: Grade A. These are not second quality fasteners that were previously rejected or rescued from a scrap yard.
7/16"-20 Fully Threaded Rod Fine Thread Zinc Clear (Choose Length & Qty) - Grade A Fine Thread Fully Threaded Rods. Protective Zinc Clear coating to help prevent rust! Finish: Zinc Clear. Coarse / Fine Threads: Fine. Grade: Grade A. These are not second quality fasteners that were previously rejected or rescued from a scrap yard.
(4808-0004-0050)Full Threaded Screws Rod Bar Studs Wearable Good Cutting - Feature: 1. The threaded rod is made of high quality stainless steel, which has high hardness, wear resistance and durability. Item Type: Stainless Steel Threaded Rod. Used for assembling and tightening, screwing into nuts or threaded holes.
GRAINGER APPROVED M20360.140.1000 Threaded Rod,Steel,M14-1.5x1m PK 6 - GRAINGER APPROVED M20360.140.1000. Grainger Part #:38DK78-6. GRAINGER APPROVED L07470.120.0035 SHCS,Flat,M12-1.75x35mm,Steel,PK300. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order.
(4808-0004-0060)Full Threaded Screws Rod Bar Studs Wearable Good Cutting - Feature: 1. The threaded rod is made of high quality stainless steel, which has high hardness, wear resistance and durability. Item Type: Stainless Steel Threaded Rod. Used for assembling and tightening, screwing into nuts or threaded holes.
Threaded Rod for Anchor Bolts Long Stainless Steel Screw Feet - Practical threaded rod can make the fasteners that screw into threaded nuts or tapped holes, allowing for the assembly of components. -The steel threaded rod has good toughness, will not easy to get rust, deform or break.
(4104-0012-0088)Hex Rod Set Easy Using Aluminium Alloy Wear Resistance Durable - Can be used with other robot parts with matching hex holes, which can effectively prevent the parts from rotating and slipping on the hex axes, so that the force of the parts is more even, and the friction and transmission or driving force efficiency are increased.
GRAINGER APPROVED M20130.060.1000 Threaded Rod,Steel,M6-1.0x1m PK 10 - GRAINGER APPROVED M20130.060.1000. Grainger Part #:19NN10-10. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
M3 - M4 Hex Studs Coupling Nuts Brass Column Female Thread Standoff Connectors - These versatile spacers are used to securely mount your circuit board and set it apart from other components, such as the inside of a computer case or other circuit board. They are also ideal for improving air circulation around components when the device gets hot.
All thread rod 3/8" 1/2' 5/8" Zinc plated different lengths you choose!!! - This all thread rod is available in different lengths of your choice ranging from 3/8", 1/2" to 5/8". Made of high-quality steel and coated with zinc for protection against corrosion, this fully threaded rod is ideal for various industrial and DIY projects. Its inch-based system of measurement makes it easily compatible with other parts and equipment. Additionally, this threaded rod comes with a number in pack of one, ensuring that you get the exact amount you need for your project. The material and finish of this all thread rod have been carefully chosen to ensure maximum strength and durability. Shop now for this versatile and reliable fastener for all your industrial and DIY needs.
GRAINGER APPROVED U20200.013.3600 Threaded Rod,Steel,#6-32x3 ft PK 10 - GRAINGER APPROVED U20200.013.3600. Grainger Part #:19NT25-10. GRAINGER APPROVED U38871.009.0268 O-Ring,Dash 147,Viton,0.1 In.,PK10. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order.
2pcs 6mm SA6T/K Threaded Rod End Spherical Plain Bearing - Type: Spherical Plain Bearing. Self-lubricating rod end bearing. We'd like to settle any problem in a friendly manner. It's just take you 1 minute. Because the unpaid dispute will not be closed automatically, and we may ignore it.
2pcs 6mm sa6T/K Threaded Rod End Spherical Plain Bearing - Type: Spherical Plain Bearing. Self-lubricating rod end bearing. We'd like to settle any problem in a friendly manner. It's just take you 1 minute. Because the unpaid dispute will not be closed automatically, and we may ignore it.
2pcs 6mm Sa6t / K Threaded Fine - 2pcs 6mm SA6T/K Threaded Rod End Spherical Plain Bearing. Because the unpaid dispute will not be closed automatically, and we may ignore it. It's just take you 1 minute. We'd like to settle any problem in a friendly manner.
2pcs 6mm SA6T/K Threaded Rod End Spherical Plain Bearing - Type: Spherical Plain Bearing. We'd like to settle any problem in a friendly manner. Self-lubricating rod end bearing. It's just take you 1 minute. Because the unpaid dispute will not be closed automatically, and we may ignore it.
Simpson Strong-Tie ATR5/8X18 - 5/8" x 18" All-Thread Rod Plain Carbon Steel - Fewer anchor bolts and fasteners, along with easy access to the top and bottom of the wall, result in more efficient installation. u = 58 ksi and not to exceed 80 ksi. Design procedures that account for cumulative overturning.
5/8"-13 x 8" Steel Fully Threaded Rod Lot of 8 - Warehouse Location: M53315. Prefer to pick it up yourself?. Country of Manufacture: N/A. To get a freight quote we will need to know the following Need it urgently?. Call us and we will do what we can to get it to you quickly.
18-8 Stainless Steel Fully Threaded Rod 3/8-16 Thread Size 36 Length Right - Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components. The difference between rods and studs is length: In general, a stud is up to 1 foot long, and a rod is more than 1 foot long.
Precision 8mm Stainless Steel Lead Screw Rod w/ Brass Nut - Length Range - Adjustable 2 Point Hunting Rifle Sling - Outdoor Tactical Gun Strap Belt. 10x Fishing Rod Ties Holder Strap Tackle Band Wrap Belt Fastener - Reusable. 40pcs Interdental Brush Toothpick Floss Stick for Teeth Cleaning Dental Care.
8mm Stainless Steel Lead Screw 100-500mm Length for DIY Projects Machinery - Length: 100mm, 150mm, 200mm, 250mm, 300mm, 330mm, 350mm, 400mm, 500mm (Optional). Kitchen Gas Range Stove Top Burner Cover Guard Protector Reusable Non-stick Line. 3Pcs Integrated Transparent Dart Shaft Flights - Anti-Break Standard Shape.
1/4 In. X 12 In. Zinc Threaded Rod - These 1/4 in. Zinc Threaded Rods have continuous threading without a head or fashioned tip. Zinc Threaded Rod. Zinc-plated finish is corrosion resistant. Steel construction.
4 pieces 1018 steel threaded rods 4 inches long 3/8-24 3/8 24 thread military - 24W201 up for sale is a lot of 5 1018 steel threaded rods these are all 4 inches long and have a thread that is 3/8-24 the full length , these are use for a military application and covered under part number 10862293 and also NSN 5307-00-624-0344 , the rods have some minor oxidation from storage , but are in good usable shape for any project , these come loose as shown in the photos , see our store for more items like this we try to add new items like this weekly , thank you Rwk
E-z Lok Ez-329-7 Thread Repair Kit, Self Locking Thread Inserts, Black - Introducing the Zoro Select EZ-329-7 Thread Repair Kit, the perfect solution for repairing damaged threads. This kit includes self-locking thread inserts made of durable steel material, compatible with metal materials. The kit weighs 0.8600 pounds and measures 9.000 inches in length and 5.000 inches in width.The EZ-329-7 model is designed to provide reliable and long-lasting thread repair, making it a valuable addition to any toolbox. This kit does not include a battery or bundle, and it complies with California Prop 65 Warning. Don't miss out on this high-quality thread repair kit from Zoro Select.Item is new, plastic seal was broken.
GRAINGER APPROVED M20300.040.1000 Threaded Rod,Steel,M4-0.7x1m PK 10 - GRAINGER APPROVED M20300.040.1000. Grainger Part #:25DM24-10. GRAINGER APPROVED ZA0196-SS32D Standoff,Round,18-8,1" OD,5/16"-18,PK2. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order.
1"-8 x 36" Long Full Thread Rod - Prefer to pick it up yourself?. Warehouse Location: L4435. To get a freight quote we will need to know the following Need it urgently?. Call us and we will do what we can to get it to you quickly. Size: Length: 38 in.
GRAINGER APPROVED M20200.120.1000 Threaded Rod,Steel,M12-1.75x1m PK 10 - GRAINGER APPROVED M20200.120.1000. Grainger Part #:38DK58-10. GRAINGER APPROVED M01258.120.0020 Flange Bolts,Fastener L 20 mm,PK50. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order.
8mm T8 Stainless Steel Threaded Rod Lead Screw Brass Nut 100-500mm Length - Length: 100mm, 150mm, 200mm, 250mm, 300mm, 330mm, 350mm, 400mm, 500mm (Optional). Kitchen Gas Range Stove Top Burner Cover Guard Protector Reusable Non-stick Line. 3Pcs Integrated Transparent Dart Shaft Flights - Anti-Break Standard Shape.
Wexxar 06-023 Bearing Rod End 5/16" Female Stud - For sale is a Wexxar 06-023 Bearing Rod End 5/16" Female Stud. Item appears new and in excellent condition. May show minor imperfections from shelf wear but nothing that will impact performance. Bearing Rod End.
Everbilt Threaded Rod 3/8 in. x 72 in. Zinc Long-Lasting Durable Steel - Zinc Threaded Rod. Thread Type: Threaded. Features long-lasting durable steel construction. Fastener Callout Size: 3/8 in.-16 x 72 in. Material: Steel. For this reason, we are typically unable to honor cancellation requests.
Lot of 8 - Threaded Teflon Coated Stud Bolts w/ Hex Nuts 1-1/4" -8 X 10” H2 B7 - Lot of 8 - Threaded Teflon Coated Stud Bolts w/ Hex Nuts 1-1/4" x 8 threads 10” Long 2- H2 Heavy Hex Nuts on each Stud B7 Material for Studs and H2 for the Nuts1-1/4 -8 x 10 B7 Stud w/2 2HNew in box. Box was opened to check for quantity and quality. Buyer to confirm fit for use prior to purchase. If you have any questions please let me know. Thanks
Marine 3/8" Swageless Threaded Stud 5/8" Thread 3/8" Cable Stainless Steel 316 - 5/8" Thread. Used For 3/8" Cable Wire. Stainless Steel T316 which performs superior in corrosion and rust resistance, durability, and strength, applicable for both indoor and outdoor uses, so you’re sure to use our turnbuckle for years.
Marine 1/4" Swageless Threaded Stud 1/2" Thread 1/4" Cable Stainless Steel 4 Pcs - 5/16" Thread. Used For 3/16" Cable Wire. Stainless Steel T316 which performs superior in corrosion and rust resistance, durability, and strength, applicable for both indoor and outdoor uses, so you’re sure to use our turnbuckle for years.
3/16" Swageless Threaded Stud 5/16" Thread 3/16" Cable Stainless Steel 4 Pcs - Marine 3/16" Swageless Threaded Stud 5/16" Thread 3/16" Cable Stainless Steel T316 4 Pcs. 5/16" Thread. Used For 3/16" Cable Wire. Stainless Steel T316 which performs superior in corrosion and rust resistance, durability, and strength, applicable for both indoor and outdoor uses, so you’re sure to use our turnbuckle for years.
8mm Stainless Steel Lead Screw + Brass Nut 100-500mm Length - Fast Shipping - Length: 100mm, 150mm, 200mm, 250mm, 300mm, 330mm, 350mm, 400mm, 500mm (Optional). Professional Self Tanning Brush - Maximum Coverage Body Makeup - Black. New Oticon ProWax MiniFit Earwax Filters - Hearing Aid Wax Guards - Genuine.
(4808-0004-0050)Rod Bar Studs Full Threaded Screws High Speed High Hardness For - Feature: 1. The threaded rod is made of high quality stainless steel, which has high hardness, wear resistance and durability. Item Type: Stainless Steel Threaded Rod. Used for assembling and tightening, screwing into nuts or threaded holes.
8mm Acme Threaded Rod 100-500mm Stainless Steel Lead Screw + Brass Nut - Features: - Stainless steel material, not rust, durable. - Easy to install and convenient to use, no need to process. - Fine producing and practical. - A great lead screw rod replacement for 3D printer. - Corrosion resistance, high temperature resistance.
(12 Pcs.) Ameribolt 316 Stainless Steel Studs 1/2-13 x 2-1/2" Long ~NEW~ - Stainless Steel Studs. Fully Threaded Studs. Material:316 Stainless Steel. Unless other provisions are necessary. Size: 1/2-13 x 2-1/2" Long. Condition:~NEW~. Total Wt.: 2 lbs. We Are Not Responsible For Typographical Errors.
T8 Stainless Steel Lead Screw 8mm Acme Threaded Rod w/ Brass Nut 100-500mm - LED Flasher Relay for Turn Signal Indicator - Fix Blinker with 3-Pin Light. - Length: 100mm, 150mm, 200mm, 250mm, 300mm, 330mm, 350mm, 400mm, 500mm (Optional). Portable USB Car Spray Paint Gun Light for Automotive - Lightweight.
Screw Bolt M8/10cm Long (100 Piece) - for Pipe Clamp - The hanger bolt is a fastening screw that has a dowel thread at one end and a metric thread at the other. It can be used to attach pipe clamps to masonry. There is a hexagon between the threads of the hanger screw so that you can screw the screw into the wall with an open-end wrench. At the end of the metric thread there is still the option of attaching the screw using a tork. If all forms of drive fail, the hanger bolt can also be turned using locked nuts. Technical data: Material: galvanized steel Total length: 10cm Length metric thread: 40mm Length of dowel thread: 40mm Diameter: 8mm (M8) Contents: 100 pieces.
Screw Bolt M10/10cm Long (100 Piece) - for Pipe Clamp - The hanger bolt is a fastening screw that has a dowel thread at one end and a metric thread at the other. It can be used to attach pipe clamps to masonry. There is a hexagon between the threads of the hanger screw so that you can screw the screw into the wall with an open-end wrench. At the end of the metric thread there is still the option of attaching the screw using a tork. If all forms of drive fail, the hanger bolt can also be turned using locked nuts. Technical data: Material: galvanized steel Total length: 10cm Length metric thread: 40mm Length of dowel thread: 40mm Diameter: 10mm (M10) Contents: 100 pieces.
8mm Acme Threaded Rod T8 Stainless Steel Lead Screw w/ Brass Nut 100-500mm - Length: 100mm, 150mm, 200mm, 250mm, 300mm, 330mm, 350mm, 400mm, 500mm (Optional). Kitchen Gas Range Stove Top Burner Cover Guard Protector Reusable Non-stick Line. Durable Camo Canteen for Outdoor Excursions - Military-Grade Aluminum Design.
T8 Stainless Steel 8mm Acme Threaded Rod 100-500mm + Brass Nut Lead Screw - Professional ABS Sports Whistle Black and Silver Design Nuclear-Free. - Length: 100mm, 150mm, 200mm, 250mm, 300mm, 330mm, 350mm, 400mm, 500mm (Optional). 12KN Aluminum Alloy Auto Locking Rock Climbing Carabiner - Strong Safe.
GRAINGER APPROVED M51070.140.1000 Threaded Rod,A2 SS,M14-2.0x1m PK 6 - GRAINGER APPROVED M51070.140.1000. Grainger Part #:25DM59-6. GRAINGER APPROVED U07410.043.0125 SHCS,Flat,Steel,7/16"-14x1-1/4",PK25. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order.
50 X 3m M8 threaded Rod bar din 9761 - This listing is for 50X lengths of high-quality M8 threaded bar, each measuring 3 meters in length. These threaded bars are made according to the DIN 9761 standard, ensuring their durability and reliability in a variety of applications.
1"-8 Full Threaded Rod 36" OAL - Size: Length: 36 in. Width: 6 in. Height: 6 in. To get a freight quote we will need to know the following Prefer to pick it up yourself?. Need it urgently?. Call us and we will do what we can to get it to you quickly.
1-1/8"-7 Full Threaded Rod 36" OAL - Size: Length: 36 in. Width: 6 in. Height: 6 in. To get a freight quote we will need to know the following Prefer to pick it up yourself?. Need it urgently?. Call us and we will do what we can to get it to you quickly.
M10-M20 Metric Fully Threaded Rod 30-300mm Lenth A2 Stainless Steel Solid Stud - Material :A2(304) Stainless Steel. Fully Threaded Rods. 304 and 316 are both stainless and acid resistant steel, and both are sanitary grade stainless steel, suitable for use in coastal areas. 201 stainless steel has poor corrosion resistance and a dull surface, even when polished, it still presents a bright black color.
M2.5-M8 Metric Fully Threaded Rod 16-300mm Lenth A2 Stainless Steel Solid Stud - Material :A2(304) Stainless Steel. Fully Threaded Rods. 304 and 316 are both stainless and acid resistant steel, and both are sanitary grade stainless steel, suitable for use in coastal areas. Stainless steel material characteristics.
Simpson Strong-Tie ATR5/8X24 - 5/8" x 24" All-Thread Rod Plain Carbon Steel - Fewer anchor bolts and fasteners, along with easy access to the top and bottom of the wall, result in more efficient installation. u = 58 ksi and not to exceed 80 ksi. Design procedures that account for cumulative overturning.
(10) 3/8-16 X 13" Full Thread Stud Rod Stainless Steel all thread 3/8x13 - The material used is of high quality, ensuring durability and reliability in the long run. The thread size and length are specified in the title, making it easy to identify the product. These threaded stud rods belong to the category of threaded rods & threaded studs and fasteners & hardware.
(2) 3/8-16 X 13" Full Thread Stud Rod Stainless Steel all thread 3/8x13 - The material used is of high quality, ensuring durability and reliability in the long run. The thread size and length are specified in the title, making it easy to identify the product. These threaded stud rods belong to the category of threaded rods & threaded studs and fasteners & hardware.
M6 M8 M10 M12 Threaded Metric Bar Studding Rod Zinc Bzp Plated - Discover the strength and versatility of our Steel Threaded Bars, an essential component for any construction, DIY, or repair project. Each bar is fully threaded, ensuring optimal fit and secure fastening.
GRAINGER APPROVED U20365.050.1200 Threaded Rod,Steel,1/2-20x1 ft PK 10 - GRAINGER APPROVED U20365.050.1200. Grainger Part #:19NM25-10. GRAINGER APPROVED 12033 Sinus and Allergy,Tablet,545mg Sz,PK100. GRAINGER APPROVED 4NXU1 Swivel Flange,Fr Pipe Sz 1 1/4 in. Diversion contrary to U.S. law is prohibited.
Simpson Strong-Tie ATR1/2X12 - 1/2" x 12" All-Thread Rod Plain Carbon Steel - Fewer anchor bolts and fasteners, along with easy access to the top and bottom of the wall, result in more efficient installation. u = 58 ksi and not to exceed 80 ksi. Design procedures that account for cumulative overturning.
Simpson Strong-Tie ATR7/8X20 - 7/8" x 20" All-Thread Rod Plain Carbon Steel - Fewer anchor bolts and fasteners, along with easy access to the top and bottom of the wall, result in more efficient installation. u = 58 ksi and not to exceed 80 ksi. Design procedures that account for cumulative overturning.
5/8"-11 x 24" OAL Steel Fully Threaded Rod Lot Of 16 - Size: Length: 26 in. Width: 7 in. Height: 7 in. Weight (lbs, oz): 27. Warehouse Location: F2093. Prefer to pick it up yourself?. Country of Manufacture: N/A. To get a freight quote we will need to know the following.
GRAINGER APPROVED U55070.025.3600 Threaded Rod,316 SS,1/4-20x3 ft PK 10 - GRAINGER APPROVED U55070.025.3600. Grainger Part #:4RDK7-10. GRAINGER APPROVED 24M098 Flat Indicator Light,Red,24VDC. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order.
Simpson Strong-Tie CNW1-7/8 - 1" to 7/8" Coupler Nut Reducer w/ Witness Hole - The Witness Hole. Tighten the two rods until each all-thread rod is visible in the Witness Hole. Any portion of thread visible in the Witness Hole is a correct installation. The CNW exceeds the specified minimum tensile capacity of corresponding ASTM A36 bolts and threaded rod.
(4104-0012-0096)Hex Rod Set Easy Using Aluminium Alloy Wear Resistance Durable - Can be used with other robot parts with matching hex holes, which can effectively prevent the parts from rotating and slipping on the hex axes, so that the force of the parts is more even, and the friction and transmission or driving force efficiency are increased.
GRAINGER APPROVED M20220.050.1000 Threaded Rod,Steel,M5-0.8x1m PK 2 - GRAINGER APPROVED M20220.050.1000. Grainger Part #:25DL84-2. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
Stainless Steel 1/4" Thread Fully Threaded Rod 12" Length Long Threaded Screw (1 - Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components. The difference between rods and studs is length: In general, a stud is up to 1 foot long, and a rod is more than 1 foot long.
3/8"-16 Threaded Steel Welding Stud 1.147" OAL 1" Thread Length Lot Of 115 - Weight (lbs, oz): 4. Warehouse Location: S5644. Prefer to pick it up yourself?. To get a freight quote we will need to know the following Country of Manufacture: N/A. Need it urgently?. Call us and we will do what we can to get it to you quickly.
1/4"-20 Threaded Steel Welding Stud 1.185" OAL 1" Thread Length Lot Of 135 - Weight (lbs, oz): 2. Warehouse Location: S5644. Prefer to pick it up yourself?. To get a freight quote we will need to know the following Country of Manufacture: N/A. Need it urgently?. Call us and we will do what we can to get it to you quickly.
3/8"-16 Partial Threaded Steel Weld Stud 1.4005" OAL 1" Thread Length Lot Of 260 - Weight (lbs, oz): 10. Warehouse Location: S5644. Prefer to pick it up yourself?. To get a freight quote we will need to know the following Country of Manufacture: N/A. Need it urgently?. Call us and we will do what we can to get it to you quickly.
M10/M8 stainless steel bolt, concentrically threaded - Concentrically threaded. Stainless steel bolt. Length of primary bolt: 65 mm. De pending on the weight and density of the goods we use cardboard boxes, with bubble wrap and/or closed cell foam for padding.
M20 / M10 stainless steel bolt, concentrically threaded - Concentrically threaded. Stainless steel bolt. Length of primary bolt: 80 mm. De pending on the weight and density of the goods we use cardboard boxes, with bubble wrap and/or closed cell foam for padding.
M16 Threaded Brass Bar 900mm Long - M16 Threaded Brass bar 900 long left over from a job a few years ago been left and as a few slight scuffs as shown in photos weights kg
GRAINGER APPROVED U22182.050.2400 THRD B7 YP UNC,1/2-13x2 ft PK 10 - GRAINGER APPROVED U22182.050.2400. THRD B7 YP UNC,1/2-13x2 ft PK 10. Grainger Part #:19NM93-10. GRAINGER APPROVED 4NXU1 Swivel Flange,Fr Pipe Sz 1 1/4 in. GRAINGER APPROVED 12033 Sinus and Allergy,Tablet,545mg Sz,PK100.
Carbon Steel Rod, Ends Threaded Equally, Black Oxide Finish, 1/2"-13 Threads, 12 - Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components. The difference between rods and studs is length: In general, a stud is up to 1 foot long, and a rod is more than 1 foot long.
Highland 1"-8 x 7-3/4" Fully Threaded Stud w/ 2x 1"-8 Nuts, Blue Teflon Coated - This is size 1"-8 with a length of 7-3/4". Both the stud and nuts have a heavy blue PTFE Xylan Teflon coating for superior corrosion resistance and extended stud life. This coating provides a dramatically increased lifespan, tensile strength, ease of use, and corrosion resistance.
GRAINGER APPROVED U20170.037.3600 Threaded Rod,Steel,3/8-16x3 ft PK 10 - GRAINGER APPROVED U20170.037.3600. Grainger Part #:19NT51-10. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
Threaded Screw Stainless Steel Metal Fully Rod for Hangers Replacement - Blow Up Dog Cone Dog Collars Pet Collars Elizabethan Collar for Dogs. -Practical threaded rod is used for anchor bolts, hangers, u bolts and many other uses. 1 x Threaded Rod. -With clear and neat threads, without burrs, the long rod provides uniform force and easy to install.
3/8"-16 x 3' Steel Threaded Rod Lot of 8 - Warehouse Location: F0012. Size: Length: 38 in. Width: 4 in. Height: 4 in. Prefer to pick it up yourself?. Country of Manufacture: N/A. To get a freight quote we will need to know the following Need it urgently?.
M5 Threaded Rod Set for TA1LSX Butterfly Capacitor Plates, Stainless Steel - M5 (5mm) Fully Threaded Rods for Butterfly capacitors (Right Hand Threads). If you build butterfly capacitor you will need 5 pcs. 5 SET Butterfly Plates: 10-14 CM. 10 SET Butterfly Plates: 13-17 CM. 15 SET Butterfly Plates: 17-21 CM.
Simpson Strong-Tie ATR1/2X48 - 1/2" x 48" All-Thread Rod Plain Carbon Steel - Fewer anchor bolts and fasteners, along with easy access to the top and bottom of the wall, result in more efficient installation. u = 58 ksi and not to exceed 80 ksi. Design procedures that account for cumulative overturning.
NELSON STUD WELDING INC. 101-010-073-G100 NELSON 100pc 1.25" Drawn Arc Weld Stud - NELSON 100pc 1.25" Drawn Arc Weld Stud PK 4. NELSON STUD WELDING INC. 101-010-073-G100. Diversion contrary to U.S. law is prohibited. Country of Importation and Anti-diversion. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
GRAINGER APPROVED M20130.050.1000 Threaded Rod,Steel,M5-0.8x1m PK 10 - GRAINGER APPROVED M20130.050.1000. Grainger Part #:19NN09-10. GRAINGER APPROVED 4NXU1 Swivel Flange,Fr Pipe Sz 1 1/4 in. GRAINGER APPROVED 12033 Sinus and Allergy,Tablet,545mg Sz,PK100. Diversion contrary to U.S. law is prohibited.
11x M16 Threaded Rod Pin Screw Threaded Bolt Studs Twin-Threaded #3 - VAT is already included in the amount and is shown separately for use with slot nuts for clamping on a slot table more industrial supplies, machines, shelves, tools, spare parts, screws... can be found here Special items/bankruptcy goods We would be very grateful if you gave us 5 stars for each of the detailed evaluations You will automatically receive a positive rating as soon as you have submitted a positive rating. If you are dissatisfied with the delivered item, please contact us before you leave a review. We try to find a reasonable solution to problems. If you have any questions, please always email me directly via ebay, this will be processed with priority, as I can then immediately see what it is about. If the request goes directly to my email address, the answer may take a little.
17x M14 M16 M18 Threaded Rod Pin Screw Threaded Bolt Studs #4 - VAT is already included in the amount and is shown separately 1x M16x220mm: 1x M16x100mm + M16x20mm more industrial supplies, machines, shelves, tools, spare parts, screws... can be found here Special items/bankruptcy goods We would be very grateful if you gave us 5 stars for each of the detailed evaluations You will automatically receive a positive rating as soon as you have submitted a positive rating. If you are dissatisfied with the delivered item, please contact us before you leave a review. We try to find a reasonable solution to problems. If you have any questions, please always email me directly via ebay, this will be processed with priority, as I can then immediately see what it is about.
GRAINGER APPROVED M20230.100.1000 Threaded Rod,Steel,M10-1.5x1m PK 10 - GRAINGER APPROVED M20230.100.1000. Grainger Part #:19NN20-10. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
Metric Zinc BZP HT 8.8 All Threaded Bar Stud 100mm 250mm 500mm - M6 X 1Mtr Ht Allthread Gr8.8 Zp. M8 X 1Mtr Ht Allthread Gr8.8 Zp. M10 X 1Mtr Ht Allthread Gr8.8 Zp. M12 X 1Mtr Ht Allthread Gr8.8 Zp. M16 X 1Mtr Ht Allthread Gr8.8 Zp. M20 X 1Mtr Ht Allthread Gr8.8 Zp.
Metric x 500mm Solid Brass All Thread Bar Stud Rod DIN 975 - 500mm LengthsM3, M4, M5, M6, M8, M10, M12, Solid Brass, All Threaded Bar/ Rod, DIN 975. M3 X 500mm Din 975 Brass Studding. M4 X 500mm Din 975 Brass Studding. M5 X 500mm Din 975 Brass Studding. M6 X 500mm Din 975 Brass Studding.
Metric Zinc BZP HT 8.8 All Threaded Bar Stud Rod 500mm - M6 X 1Mtr Ht Allthread Gr8.8 Zp. M8 X 1Mtr Ht Allthread Gr8.8 Zp. M10 X 1Mtr Ht Allthread Gr8.8 Zp. M12 X 1Mtr Ht Allthread Gr8.8 Zp. M16 X 1Mtr Ht Allthread Gr8.8 Zp. M20 X 1Mtr Ht Allthread Gr8.8 Zp.
Metric Self Colour Grade 4.8 Threaded Bar Stud Rod 500mm - Chemical Anchor. M10 Loose Bolt High Tensile 8.8 Masonry Shield Anchor Zinc. M12 Throughbolts A2 Stainless Steel Heavy Duty Masonry Concrete Anchor. UNC, 1" Hex Bolt and Set Screw High Tensille 8.8 Self Colour DIN931.
Metric Various Lengths Solid Brass All Thread Bar Rod Din 976 - M3, M4, M5, M6, M8, M10, M12 x Various Lengths, Solid Brass, All Threaded Bar/ Rod, Din 976. M3x 100mm, 250mm, 500mm Din 975 Brass Studding. M4x 100mm, 250mm, 500mm Din 975 Brass Studding. M5x 100mm, 250mm, 500mm Din 975 Brass Studding.
Metric x 500mm A2 304 Stainless Steel Threaded Bar Stud Rod DIN975 - M3-M36 x 500mm Lengths, A2/ 304 Stainless Steel, Threaded Bar/ Studding/ Rod/ Din 975. M3 A2 - 304 St/St Studding x 500mm Lengths. M4 A2 - 304 St/St Studding x 500mm Lengths. M5 A2 - 304 St/St Studding x 500mm Lengths.
Metric Zinc BZP Mild Steel 4.8 All Threaded Bar Stud Rod 500mm - M5x1000mm Threaded Rod Din976 G4.8 BZP CR3. M6x1000mm Threaded Rod Din976 Gr4.8 BZP CR3. M8x1000mm Threaded Rod Din976 Gr4.8 BZP CR3. M10x1000mm Threaded Rod Din976 Gr4.8 BZP CR3. M12x1000mm Threaded Rod Din976 Gr4.8 BZP CR3.
BSW x Various Lengths Self Colour Grade 4.8 All Thread Bar Din 976 - BSW Allthread Studding can be uséd in the following applications 36 x 3/16 BSW M.S Allthread Self Colourx 12", 18", 24", 36". 36 X 1/4 BSW M.S. Allthread Self Colourx 12", 18", 24",36". 36 X 5/16 BSW M.S. Allthread Self Colourx 12", 18", 24", 36".
BSW x 1yd Self Colour Grade 4.8 All Threaded Bar Rod Din 976 - 36 x 3/16 BSW M.S Allthread Self Colour x 1yd Lengths. 36 X 1/4 BSW M.S. Allthread Self Colour x 1yd Lengths. 36 X 5/16 BSW M.S. Allthread Self Colour x 1yd Lengths. 36 X 3/8 BSW M.S. Allthread Self Colour x 1yd Lengths.
Metal Threaded Rod Replacement for Hangers Extra Long Studs - Practical threaded rod is used for anchor bolts, hangers, u bolts and many other uses. 24pcs proposal holder earrings studs case Jewelery Organizers. 1 x Threaded Rod. -With clear and neat threads, without burrs, the long rod provides uniform force and easy to install.
1"-8 Full Threaded Rod 21" OAL - Size: Length: 23 in. Width: 3 in. Height: 3 in. To get a freight quote we will need to know the following Prefer to pick it up yourself?. Need it urgently?. Call us and we will do what we can to get it to you quickly.
Threads Rod Long Threaded Replacement Metal Stainless Steel Teeth - Practical threaded rod can make the fasteners that screw into threaded nuts or tapped holes, allowing for the assembly of components. -The steel threaded rod has good toughness, will not easy to get rust, deform or break.
Stainless Steel 304 Fully Threaded Rod (1/2-13 X 3Ft (3 Pack)) - These 1/2"-13coarse threaded rods are high quality type 18-8 stainless steel and are sold in bundles of 3 foot sections. Each bundle gives you 3 pieces for a total of 9FT. Every piece is fully threaded.
All America Fully Threaded Rod, 1-3/8"-6, 3 ft, Steel, Low Carbon, Plain Finish - Introducing the All America Fully Threaded Rod, suitable for a variety of industrial and business needs. This high-quality threaded rod has a thread size of 1-3/8"-6 and a length of 3 ft. Made from low carbon steel material, it is both durable and corrosion-resistant. The plain finish gives it a sleek, professional look. With fully threaded coverage and a right-hand thread direction, this threaded rod is compatible with a wide range of fasteners and hardware. It is available in a unit quantity of 1 and is categorized under Threaded Rods & Threaded Studs, Fasteners & Hardware, and Business & Industrial. Get your hands on this versatile and reliable threaded rod today!
Carbon Steel Rod, Ends Threaded Equally, Black Oxide Finish, 1/2"-13 Threads, 12 - Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components. The difference between rods and studs is length: In general, a stud is up to 1 foot long, and a rod is more than 1 foot long.
Simpson Strong-Tie ATR1/2X24 - 1/2" x 24" All-Thread Rod Plain Carbon Steel - Fewer anchor bolts and fasteners, along with easy access to the top and bottom of the wall, result in more efficient installation. u = 58 ksi and not to exceed 80 ksi. Design procedures that account for cumulative overturning.
Metric Fine/ Extra Fine Pitch x 1m Self Colour 4.8 Threaded Bar Rod - M10 X 1.0P MS Allthread x 1m Lengths. M10 X 1.25P MS Allthread x 1m Lengths. M12 X 1.25P MS Allthread x 1m Lengths. M12 X 1.5P MS Allthread x 1m Lengths. M16 X 1.5P MS Allthread x 1m Lengths. M20 X 1.5P MS Allthread x 1m Lengths.
UNF 12" 18" 24" Threaded Bar Stud Rod A2/ 304 Stainless Steel - Various Lengths - UNF (UNIFIED Fine Thread) Threaded Studding/ Bar/ Rod A2/ 304 Stainless Steel, Din 976. Chemical Anchor. M12 Throughbolts A2 Stainless Steel Heavy Duty Masonry Concrete Anchor. M10 Loose Bolt High Tensile 8.8 Masonry Shield Anchor Zinc.
UNF 18" Threaded Bar Stud Rod A2/ 304 Stainless Steel - 18"/ 1.5ft Lengths - UNF (Unified Fine Thread) Threaded Studding/ Bar/ Rod, A2/ 304 Stainless Steel, Din 976. Chemical Anchor. M12 Throughbolts A2 Stainless Steel Heavy Duty Masonry Concrete Anchor. M10 Loose Bolt High Tensile 8.8 Masonry Shield Anchor Zinc.
UNF 36" 1yd Threaded Bar Stud Rod A2/ 304 Stainless Steel - 36"/ 3ft/ 1yard Lengths - UNF (Unified Fine Thread) Threaded Studding/ Bar/ Rod, A2/ 304 Stainless Steel, Din 976. Chemical Anchor. M12 Throughbolts A2 Stainless Steel Heavy Duty Masonry Concrete Anchor.
Simpson Strong-Tie ATR3/8X48 - 3/8" x 48" All-Thread Rod Plain Carbon Steel - Fewer anchor bolts and fasteners, along with easy access to the top and bottom of the wall, result in more efficient installation. u = 58 ksi and not to exceed 80 ksi. Design procedures that account for cumulative overturning.
Stearns 8-14-6201-00 Rod, Stainless Steel, Right Hand (No Box) - Stearns 8-14-6201-00 Rod, Stainless Steel, Right Hand (No Box) Stearns 8-14-6201-00 Rod, Deadman Release Rod, Stainless Steel, Right Hand. Stearns 8-14-6201-00 Rod, Deadman Release Rod, Stainless Steel, Right Hand.
M6 M8 6mm 8mm THREADED BAR 300mm 30cm Zinc Plated Steel Rod Studding Stud - A 300mm threaded bar stud that is zinc plated steel is a type of fastener used in construction and various other applications. 300mm THREADED BAR. Zinc Plated Steel refers to a protective coating applied to the steel surface.
Fully Threaded Rod Bar Studding 304(A2) Stainless Steel M4 16mm-250mm Length - Fully Threaded Rod Bar Studding. Size:M4 16mm-250mm Length. Material :A2(304) Stainless Steel. 304 and 316 are both stainless and acid resistant steel, and both are sanitary grade stainless steel, suitable for use in coastal areas.
Fully Threaded Rod Bar Studding 304(A2) Stainless Steel M2 M2.5 M3 Metric - Fully Threaded Rod Bar Studding. Size:M2 M2.5 M3. Material :A2(304) Stainless Steel. 304 and 316 are both stainless and acid resistant steel, and both are sanitary grade stainless steel, suitable for use in coastal areas.
Fully Threaded Rod Bar Studding 304(A2) Stainless Steel M6 20mm-300mm Length - Fully Threaded Rod Bar Studding. Size:M6 20mm-300mm Length. Material :A2(304) Stainless Steel. 304 and 316 are both stainless and acid resistant steel, and both are sanitary grade stainless steel, suitable for use in coastal areas.
Fully Threaded Rod Bar Studding 304(A2) Stainless Steel M5 16mm-300mm Length - Fully Threaded Rod Bar Studding. Material :A2(304) Stainless Steel. Size:M5 16mm-300mm Length. 304 and 316 are both stainless and acid resistant steel, and both are sanitary grade stainless steel, suitable for use in coastal areas.
Fully Threaded Rod Bar Studding 304(A2) Stainless Steel M8 25mm-300mm Length - Fully Threaded Rod Bar Studding. Size:M8 25mm-300mm Length. Material :A2(304) Stainless Steel. 304 and 316 are both stainless and acid resistant steel, and both are sanitary grade stainless steel, suitable for use in coastal areas.
Fully Threaded Rod Bar Studding 304(A2) Stainless Steel M14 M16 40-250mm Length - Fully Threaded Rod Bar Studding. Size:M14 M16 40-250mm Length. Material :A2(304) Stainless Steel. 304 and 316 are both stainless and acid resistant steel, and both are sanitary grade stainless steel, suitable for use in coastal areas.
Fully Threaded Rod Bar Studding 304(A2) Stainless Steel M10 M12 30-300mm Length - Fully Threaded Rod Bar Studding. Size:M10 M12 30-300mm Length. Material :A2(304) Stainless Steel. 304 and 316 are both stainless and acid resistant steel, and both are sanitary grade stainless steel, suitable for use in coastal areas.
Fully Threaded Rod Bar Studding 304(A2) Stainless Steel M18 M20 Metric - Fully Threaded Rod Bar Studding. Size:M18 M20. Material :A2(304) Stainless Steel. 304 and 316 are both stainless and acid resistant steel, and both are sanitary grade stainless steel, suitable for use in coastal areas.
Simpson Strong-Tie ATR1-1/4X48ZP - 1-1/4" x 48" All-Thread Rod Zinc Plated - Fewer anchor bolts and fasteners, along with easy access to the top and bottom of the wall, result in more efficient installation. u = 58 ksi and not to exceed 80 ksi. Design procedures that account for cumulative overturning.
Simpson Strong-Tie ATR1-1/8X24ZP - 1-1/8" x 24" All-Thread Rod Zinc Plated - Fewer anchor bolts and fasteners, along with easy access to the top and bottom of the wall, result in more efficient installation. u = 58 ksi and not to exceed 80 ksi. Design procedures that account for cumulative overturning.
7/16 X 3 - 7/8" Alloy Steel Stud - 4140 Steel, Heat Treated to GR 8 specs (RC33-39). CNC machines typically will not make parts that will be authentic. These reproduction fasteners are the last of CR Machine's inventory.
7/16 X 3 - 1/16" Alloy Steel Stud - 4140 Steel, Heat Treated to GR 8 specs (RC33-39). CNC machines typically will not make parts that will be authentic. These reproduction fasteners are the last of CR Machine's inventory.
7/16 X 2 - 9/16" Alloy Steel Stud - 4140 Steel, Heat Treated to GR 8 specs (RC33-39). CNC machines typically will not make parts that will be authentic. These reproduction fasteners are the last of CR Machine's inventory.
7/16 X 4- 1/8" Alloy Steel Stud - 4140 Steel, Heat Treated to GR 8 specs (RC33-39). CNC machines typically will not make parts that will be authentic. These reproduction fasteners are the last of CR Machine's inventory.
Simpson Strong-Tie ATR7/8X24 - 7/8" x 24" All-Thread Rod Plain Carbon Steel - Fewer anchor bolts and fasteners, along with easy access to the top and bottom of the wall, result in more efficient installation. u = 58 ksi and not to exceed 80 ksi. Design procedures that account for cumulative overturning.
Simpson Strong-Tie ATR5/8X48 - 5/8" x 48" All-Thread Rod Plain Carbon Steel - Fewer anchor bolts and fasteners, along with easy access to the top and bottom of the wall, result in more efficient installation. u = 58 ksi and not to exceed 80 ksi. Design procedures that account for cumulative overturning.
Simpson Strong-Tie ATR1-1/8X12ZP - 1-1/8" x 12" All-Thread Rod Zinc Plated - Fewer anchor bolts and fasteners, along with easy access to the top and bottom of the wall, result in more efficient installation. u = 58 ksi and not to exceed 80 ksi. Design procedures that account for cumulative overturning.
Simpson Strong-Tie ATR1-1/4X24ZP - 1-1/4" x 24" All-Thread Rod Zinc Plated - Fewer anchor bolts and fasteners, along with easy access to the top and bottom of the wall, result in more efficient installation. u = 58 ksi and not to exceed 80 ksi. Design procedures that account for cumulative overturning.
Simpson Strong-Tie ATR1-1/4X18ZP - 1-1/4" x 18" All-Thread Rod Zinc Plated - Fewer anchor bolts and fasteners, along with easy access to the top and bottom of the wall, result in more efficient installation. u = 58 ksi and not to exceed 80 ksi. Design procedures that account for cumulative overturning.
Simpson Strong-Tie ATR1-1/4X12ZP - 1-1/4" x 12" All-Thread Rod Zinc Plated - Fewer anchor bolts and fasteners, along with easy access to the top and bottom of the wall, result in more efficient installation. u = 58 ksi and not to exceed 80 ksi. Design procedures that account for cumulative overturning.
Simpson Strong-Tie CNW3/4-5/8 - 3/4" to 5/8" Coupler Nut w/ Witness Hole - The Witness Hole. Tighten the two rods until each all-thread rod is visible in the Witness Hole. Any portion of thread visible in the Witness Hole is a correct installation. The CNW exceeds the specified minimum tensile capacity of corresponding ASTM A36 bolts and threaded rod.
Simpson Strong-Tie HSCNW1 - 1" High Strength Coupler Nut w/ Witness Holes - The Witness Hole. Tighten the two rods until each all-thread rod is visible in the Witness Hole. Any portion of thread visible in the Witness Hole is a correct installation. The CNW exceeds the specified minimum tensile capacity of corresponding ASTM A36 bolts and threaded rod.
Simpson Strong-Tie ATR1-1/8X18ZP - 1-1/8" x 18" All-Thread Rod Zinc Plated - Fewer anchor bolts and fasteners, along with easy access to the top and bottom of the wall, result in more efficient installation. u = 58 ksi and not to exceed 80 ksi. Design procedures that account for cumulative overturning.
Simpson Strong-Tie CNW5/8-R - 5/8" Coupler Nut w/Witness Hole - The Witness Hole. Tighten the two rods until each all-thread rod is visible in the Witness Hole. Any portion of thread visible in the Witness Hole is a correct installation. The CNW exceeds the specified minimum tensile capacity of corresponding ASTM A36 bolts and threaded rod.
Simpson Strong-Tie ATR5/8X12 - 5/8" x 12" All-Thread Rod Plain Carbon Steel - Fewer anchor bolts and fasteners, along with easy access to the top and bottom of the wall, result in more efficient installation. u = 58 ksi and not to exceed 80 ksi. Design procedures that account for cumulative overturning.
Simpson Strong-Tie CNW5/8-5/8-OST - 5/8" Coupler Nut w/ One Side Oversized for - Couplers may be oversized on both ends. The CNW exceeds the specified minimum tensile capacity of corresponding ASTM A36 bolts and threaded rod. The HSCNW exceeds the specified minimum tensile capacity of corresponding ASTM A449 bolts and threaded rod.
Simpson Strong-Tie ATR3/4X12 - 3/4" x 12" All-Thread Rod Plain Carbon Steel - Fewer anchor bolts and fasteners, along with easy access to the top and bottom of the wall, result in more efficient installation. u = 58 ksi and not to exceed 80 ksi. Design procedures that account for cumulative overturning.
Spool Of Thread For Use With Stihl Autocut 25-2 4002-713-3017 Reliable Use - For use with STIHL Autocut 25-2 and 4002-713-3017. For STIHL FS 40, FS 44, 48, 52, 55, 56, 62, 66, 70, 74, 76, 80, 81, 83, 85, 86, 88, 90, F90, 96, 100, 106, 108,100RX, 110, 120, 130, 200, 250, 350, 450, 550, KM 55, 85, 90, FR106, FR108 110, 130, & FS-KM and many more.
BZP M10x100mm PRE CUT STUDS Packs Of 50 Studs 9 Packs Available At £15 Each Pack - Introducing BZP M10x100mm pre-cut studs, packs of 50 studs, a top-quality product from Midfix. These studs come with a 10mm thread size and a length of 100mm, making them an ideal fit for various applications in the fasteners and hardware industry. The BZP M10x100mm pre-cut studs are perfect for use in business, office, and industrial settings. They're sturdy and reliable, making them a valuable asset to any project. With their top-notch quality and precise measurements, these studs will surely meet your needs. Get your hands on them today and experience their outstanding performance.
Alloy Steel Fully Threaded Rod, Meets ASTM A193 Grade B7, 1"-8 Thread Size, 36" - This fully threaded rod is made of alloy steel, has 1"-8 right-hand threads, and is 36" long. Alloy steel is often used in applications where strength is the primary consideration. Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components.
X6 3/8-16 FEMALE x 5/16-18 MALE 5/8" HEX THREADED ROD COUPLER STANDOFF ADAPTER - USAGE: THREADED ROD COUPLING, ADAPTER, COUPLER, SPACER, STAND OFF, MOUNT, SUPPORT. Is For: (inventory 13-5SO.375-16T-Fx.312-18T-MxMF-STL-ZNC(SO35)X6. THREADED END #1: FEMALE 3/8-16. 817 DEEP. THREADED END #2: MALE 5/16-18 3/4" LONG. ).
M20 Steel Bar 3m - I have 10 X M20 steel threaded bar 3m long , and pretty heavy if u add all 10 together. They are new n unused, and would be suited to come and collect them in se london. U r budding for 10 steel threaded bars. Msg for more info
5 PCS Hillman Steelworks 1/4 In 1 Ft Steel Threaded Rod 11007 HILLMAN Steelworks - 5 PCS Hillman Steelworks 1/4 In 1 Ft Steel Threaded Rod 11007 HILLMAN Steelworks--------------------------------------------------------------IF YOU HAVE ANY ISSUES REGARDING AN ORDER, PLEASE MESSAGE ME BEFORE OPENING A CASE.-I answer my emails MONDAY through FRIDAY. On weekdays, please allow up to 24 hours for an email response.-I take photos of the exact item that you will receive, unless stated otherwise. Please look at ALL of my pictures before purchasing an order. Y828 AXM 923
1"-14 x 3' Threaded Rod Carbon Steel - Size: Length: 38 in. Width: 6 in. Height: 6 in. Prefer to pick it up yourself?. Need it urgently?. Call us and we will do what we can to get it to you quickly. Unless otherwise specifically agreed to in writing by.
Navistar International 1820515C1 M8 x 20 x 20mm Stud Bolt Lot Of 8 - MPN: 1820515C1. Warehouse Location: S1954. Prefer to pick it up yourself?. To get a freight quote we will need to know the following Need it urgently?. Call us and we will do what we can to get it to you quickly.
5 Lengths 5mm X 155mm Threaded Rod Stainless Steel Studding Bar M5 Metric Course - Being made of stainless steel makes it resistant to corrosion and wear. A2 is the most commonly used grade in fasteners also known as A2–70, 70 represents tensile strength of 700/mm2, it’s also known as 304 or 18/8 because 18% chromium and 8% of nickel.
2 Lengths 5mm X 155mm Threaded Rod Stainless Steel Studding Bar M5 Metric Course - Being made of stainless steel makes it resistant to corrosion and wear. A2 is the most commonly used grade in fasteners also known as A2–70, 70 represents tensile strength of 700/mm2, it’s also known as 304 or 18/8 because 18% chromium and 8% of nickel.
1 Length 5mm X 155mm Threaded Rod Stainless Steel Studding Bar M5 Metric Course - Being made of stainless steel makes it resistant to corrosion and wear. A2 is the most commonly used grade in fasteners also known as A2–70, 70 represents tensile strength of 700/mm2, it’s also known as 304 or 18/8 because 18% chromium and 8% of nickel.
20 Lengths 6mm X 135mm Threaded Rod Stainless Steel Studding Bar M6 Metric - This pack of 20 quality threaded rods are standard M6 metric course 1mm tread pitch, made of durable stainless steel to a grade off A2 304, with a length of 135mm. ensuring reliable performance and strength. Being made of stainless steel makes it resistant to corrosion and wear.A2 is the most commonly used grade in fasteners also known as A2–70, 70 represents tensile strength of 700/mm2, it’s also known as 304 or 18/8 because 18% chromium and 8% of nickel. This type of stainless steel is always very slightly magnetic due to the cold working process.we am to dispatch all orders placed by 4pm, same day, Monday to Friday. Orders are sent out in well packaged boxes by courier to avoid damage that normally occurs when sent by Royal mail
15 Lengths 6mm X 135mm Threaded Rod Stainless Steel Studding Bar M6 Metric - Being made of stainless steel makes it resistant to corrosion and wear. A2 is the most commonly used grade in fasteners also known as A2–70, 70 represents tensile strength of 700/mm2, it’s also known as 304 or 18/8 because 18% chromium and 8% of nickel.
10 Lengths 6mm X 135mm Threaded Rod Stainless Steel Studding Bar M6 Metric - Being made of stainless steel makes it resistant to corrosion and wear. A2 is the most commonly used grade in fasteners also known as A2–70, 70 represents tensile strength of 700/mm2, it’s also known as 304 or 18/8 because 18% chromium and 8% of nickel.
5 Lengths 6mm X 135mm Threaded Rod Stainless Steel Studding Bar M6 Metric Course - Being made of stainless steel makes it resistant to corrosion and wear. A2 is the most commonly used grade in fasteners also known as A2–70, 70 represents tensile strength of 700/mm2, it’s also known as 304 or 18/8 because 18% chromium and 8% of nickel.
2 Lengths 6mm X 135mm Threaded Rod Stainless Steel Studding Bar M6 Metric Course - Being made of stainless steel makes it resistant to corrosion and wear. A2 is the most commonly used grade in fasteners also known as A2–70, 70 represents tensile strength of 700/mm2, it’s also known as 304 or 18/8 because 18% chromium and 8% of nickel.
1 Length 6mm X 135mm Threaded Rod Stainless Steel Studding Bar M6 Metric Course - Being made of stainless steel makes it resistant to corrosion and wear. A2 is the most commonly used grade in fasteners also known as A2–70, 70 represents tensile strength of 700/mm2, it’s also known as 304 or 18/8 because 18% chromium and 8% of nickel.
Fully Threaded Rod Bar Studding 304(A2) Stainless Steel M18 M20 Metric - Fully Threaded Rod Bar Studding. Size:M18 M20. Material :A2(304) Stainless Steel. 304 and 316 are both stainless and acid resistant steel, and both are sanitary grade stainless steel, suitable for use in coastal areas.
Fully Threaded Rod Bar Studding 304(A2) Stainless Steel M14 M16 40-250mm Length - Fully Threaded Rod Bar Studding. Size:M14 M16 40-250mm Length. Material :A2(304) Stainless Steel. 304 and 316 are both stainless and acid resistant steel, and both are sanitary grade stainless steel, suitable for use in coastal areas.
Fully Threaded Rod Bar Studding 304(A2) Stainless Steel M10 M12 30-300mm Length - Fully Threaded Rod Bar Studding. Size:M10 M12 30-300mm Length. Material :A2(304) Stainless Steel. 304 and 316 are both stainless and acid resistant steel, and both are sanitary grade stainless steel, suitable for use in coastal areas.
Fully Threaded Rod Bar Studding 304(A2) Stainless Steel M8 25mm-300mm Length - Fully Threaded Rod Bar Studding. Size:M8 25mm-300mm Length. Material :A2(304) Stainless Steel. 304 and 316 are both stainless and acid resistant steel, and both are sanitary grade stainless steel, suitable for use in coastal areas.
Fully Threaded Rod Bar Studding 304(A2) Stainless Steel M6 20mm-300mm Length - Fully Threaded Rod Bar Studding. Size:M6 20mm-300mm Length. Material :A2(304) Stainless Steel. 304 and 316 are both stainless and acid resistant steel, and both are sanitary grade stainless steel, suitable for use in coastal areas.
Fully Threaded Rod Bar Studding 304(A2) Stainless Steel M5 16mm-300mm Length - Fully Threaded Rod Bar Studding. Material :A2(304) Stainless Steel. Size:M5 16mm-300mm Length. 304 and 316 are both stainless and acid resistant steel, and both are sanitary grade stainless steel, suitable for use in coastal areas.
Fully Threaded Rod Bar Studding 304(A2) Stainless Steel M4 16mm-250mm Length - Fully Threaded Rod Bar Studding. Size:M4 16mm-250mm Length. Material :A2(304) Stainless Steel. 304 and 316 are both stainless and acid resistant steel, and both are sanitary grade stainless steel, suitable for use in coastal areas.
Fully Threaded Rod Bar Studding 304(A2) Stainless Steel M2 M2.5 M3 Metric - Fully Threaded Rod Bar Studding. Size:M2 M2.5 M3. Material :A2(304) Stainless Steel. 304 and 316 are both stainless and acid resistant steel, and both are sanitary grade stainless steel, suitable for use in coastal areas.
10 Lengths 6mm X 115mm Threaded Rod Stainless Steel Studding Bar M6 Metric - Being made of stainless steel makes it resistant to corrosion and wear. A2 is the most commonly used grade in fasteners also known as A2–70, 70 represents tensile strength of 700/mm2, it’s also known as 304 or 18/8 because 18% chromium and 8% of nickel.
5 Lengths 6mm X 115mm Threaded Rod Stainless Steel Studding Bar M6 Metric Course - Being made of stainless steel makes it resistant to corrosion and wear. A2 is the most commonly used grade in fasteners also known as A2–70, 70 represents tensile strength of 700/mm2, it’s also known as 304 or 18/8 because 18% chromium and 8% of nickel.
2 Lengths 6mm X 115mm Threaded Rod Stainless Steel Studding Bar M6 Metric Course - Being made of stainless steel makes it resistant to corrosion and wear. A2 is the most commonly used grade in fasteners also known as A2–70, 70 represents tensile strength of 700/mm2, it’s also known as 304 or 18/8 because 18% chromium and 8% of nickel.
1 Length 6mm X 115mm Threaded Rod Stainless Steel Studding Bar M6 Metric Course - Being made of stainless steel makes it resistant to corrosion and wear. A2 is the most commonly used grade in fasteners also known as A2–70, 70 represents tensile strength of 700/mm2, it’s also known as 304 or 18/8 because 18% chromium and 8% of nickel.
7/8"-9 x 5" Double Ended Threaded Stud Center Flats Lot Of 2 - Prefer to pick it up yourself?. Need it urgently?. Call us and we will do what we can to get it to you quickly. Warehouse Location: S0555. To get a freight quote we will need to know the following Country of Manufacture: N/A.
1"-8 x 5" Double Ended Threaded Stud Center Flats - Prefer to pick it up yourself?. Need it urgently?. Call us and we will do what we can to get it to you quickly. To get a freight quote we will need to know the following We choose the carrier. LOCAL PICK-UP.
3/4"-10 x 6" Double Ended Threaded Stud Lot Of 2 - Thread lengths are 2" x 1". Prefer to pick it up yourself?. Warehouse Location: S0553. To get a freight quote we will need to know the following Country of Manufacture: N/A. Unless otherwise specifically agreed to in writing by.
3/4"-10 x 6" Double Ended Threaded Hold Down Clamp Stud Center Flat - Will there be a dock or forklift. Prefer to pick it up yourself?. Need it urgently?. Call us and we will do what we can to get it to you quickly. We choose the carrier. To get a freight quote we will need to know the following.
1"-8 x 6" Double Ended Threaded Stud Center Flats Lot Of 2 - Prefer to pick it up yourself?. Need it urgently?. Call us and we will do what we can to get it to you quickly. Warehouse Location: S0555. To get a freight quote we will need to know the following Country of Manufacture: N/A.
3/4"-10 x 6" Double Ended Threaded Stud Center Flats - Prefer to pick it up yourself?. Need it urgently?. Call us and we will do what we can to get it to you quickly. To get a freight quote we will need to know the following We choose the carrier. LOCAL PICK-UP.
Assorted Lot Of All Threaded Rods Steel **Lot Of 8** - Approximate weight: 1 lbs. aucCounter span:hover { text-decoration:underline; }. aucHiddenCounter { display:none; }. aucCounterOrangeText { color:#FB6D05; font-family:Arial; Font-size:13px; Font-weight:bold; }.
M14-2.0x1000 Fully Threaded Rod A2-70 Stainless Steel (Choose Qty) - Grade: A2-70 Stainless Steel. Protective Stainless Steel to help prevent rust! These are not second quality fasteners that were previously rejected or rescued from a scrap yard. We will do our best to make it right.
M10-1.5x1000 Fully Threaded Rod A2-70 Stainless Steel (Choose Qty) - Grade: A2-70 Stainless Steel. Protective Stainless Steel to help prevent rust! These are not second quality fasteners that were previously rejected or rescued from a scrap yard. We will do our best to make it right.
M16-2.0x1000 Fully Threaded Rod A2-70 Stainless Steel (Choose Qty) - Grade: A2-70 Stainless Steel. Protective Stainless Steel to help prevent rust! These are not second quality fasteners that were previously rejected or rescued from a scrap yard. We will do our best to make it right.
M8-1.25x1000 Fully Threaded Rod A2-70 Stainless Steel (Choose Qty) - Grade: A2-70 Stainless Steel. Protective Stainless Steel to help prevent rust! These are not second quality fasteners that were previously rejected or rescued from a scrap yard. We will do our best to make it right.
M12-1.75x1000 Fully Threaded Rod A2-70 Stainless Steel (Choose Qty) - Grade: A2-70 Stainless Steel. Protective Stainless Steel to help prevent rust! These are not second quality fasteners that were previously rejected or rescued from a scrap yard. We will do our best to make it right.
M6-1.0x1000 Fully Threaded Rod A2-70 Stainless Steel (Choose Qty) - Grade: A2-70 Stainless Steel. Protective Stainless Steel to help prevent rust! These are not second quality fasteners that were previously rejected or rescued from a scrap yard. We will do our best to make it right.
3/8-16x3' ft Fully Threaded Rod Stainless Steel (Choose Qty) - Stainless Steel Coarse Thread Fully Threaded Rods. Grade: 18-8(304) Stainless Steel. Protective Stainless Steel to help prevent rust! These are not second quality fasteners that were previously rejected or rescued from a scrap yard.
1/4-20x3' ft Fully Threaded Rod Stainless Steel (Choose Qty) - Stainless Steel Coarse Thread Fully Threaded Rods. Grade: 18-8(304) Stainless Steel. Protective Stainless Steel to help prevent rust! These are not second quality fasteners that were previously rejected or rescued from a scrap yard.
1/2-13x3' ft Fully Threaded Rod Stainless Steel (Choose Qty) - Stainless Steel Coarse Thread Fully Threaded Rods. Grade: 18-8(304) Stainless Steel. Protective Stainless Steel to help prevent rust! These are not second quality fasteners that were previously rejected or rescued from a scrap yard.
5/16-18x3' ft Fully Threaded Rod Stainless Steel (Choose Qty) - Stainless Steel Coarse Thread Fully Threaded Rods. Grade: 18-8(304) Stainless Steel. Protective Stainless Steel to help prevent rust! These are not second quality fasteners that were previously rejected or rescued from a scrap yard.
(5) Threaded Rod 3/8 x 36"-Zinc Plated All-Thread 3/8 x 36", 3' Foot Long - 5 Pack of Threaded Rod 3/8-16 x 36" Zinc Plated All-Thread 3/8 36", 3' Foot Long Fully Threaded Rod - can be cut per order. Steel - zinc plated Custom orders can be arranged to your exact length up to the length you ordered if you message me what length you want. .375 inch diameter 16 threads per inch.
(5) Threaded Rod 3/8 x 6"-Zinc Plated All-Thread 3/8 6", - 5 Pack of Threaded Rod 3/8-16 x 6" Zinc Plated All-Thread 3/8 6", Fully Threaded Rod - can be cut per order. Steel - zinc plated I will cut it to your exact length up to the length you ordered if you message me what length you want. .375 inch diameter 16 threads per inch.
Military Grade A193 B16 Ms16187-152 Nos 1-1/4-8 X 8" L Rh Threaded Steel Stud - ( 1 ) MILITARY GRADE A193 B16 1-1/4-8 2A UN RH THREADED STUD 8" LONG P/N MS16187-152 NSN 5307-00-637-6520 STEEL NOTE: A193 B16 IS A HEAT TREATED CHROMIUM, MOLYDENUM,VANADIUM STEEL QUENCHED AND TEMPERED FOR A STRONGER HIGHER TEMP.
M24 x 332mm THREADED ROD STUD ZINC PLATED STUDDING BAR GRADE 4.8 - We had a job where we thought that we needed 18 off M24 x 300mm studs. We bought 6 x 1000 mm lengths of M24 Grade 4.8 steel Plated (BZP) and paid for a local firm to cut each of them into 3 equal lengths, they then sprayed the cut ends with silver paint.
Threaded Bar M16 X 2Mm Nuts & Washers 8.8 High Tensile Steel Rod Studding Stud - These are a DIN 975. Further details are as follows Threaded Bar with Nuts & Washers - 8.8 Bright Zinc Plated Steel. Threaded Bar. The tolerance on the length of these bars is +/- 2mm expect for the 500mm length which has a +/- 4mm tolerance .
Hillman Steelworks 1/2 In. x 1 Ft. Steel Threaded Rod 11025 HILLMAN Steelworks - Zinc threaded course rods are for hangers, anchor bolts, U-bolts, and clamps. Complete with a zinc plated these threaded rods have been electroplated to proved a clean and bright look. Electroplating zinc also protects against rust. Do not weld electroplated products.
Zinc Plated Steel Threaded Studs 1/4-20 x 10" Length, Pkg of 5 Pcs - This package contains five pieces of 1/4-20 x 10" length threaded studs made of high-quality zinc plated steel. These studs are perfect for fastening applications in the business and industrial sector, particularly in the fastener and hardware industry. The finish of these studs is of great quality and is zinc plated, which ensures durability and longevity. Inch is the primary system of measurement for these studs. They are versatile and can be used for several applications. These threaded studs are new. Will ship next day air if requested at the buyers expense. .
Stainless Steel 304 Fully Threaded Rod (1/2-13 X 3Ft (3 Pack)) - These 1/2"-13coarse threaded rods are high quality type 18-8 stainless steel and are sold in bundles of 3 foot sections. Each bundle gives you 3 pieces for a total of 9FT. Every piece is fully threaded.
Simpson Strong-Tie ATR5/8X30 - 5/8" x 30" All-Thread Rod Plain Carbon Steel - Fewer anchor bolts and fasteners, along with easy access to the top and bottom of the wall, result in more efficient installation. u = 58 ksi and not to exceed 80 ksi. Design procedures that account for cumulative overturning.
M16 / 16mm STEEL THREADED METRIC BAR THREAD STUDDING ROD RESIN ANCHOR STUD ZINC - Threaded Studding Threaded BAR / ROD ZINC PLATED-Sizes from M6 upto M16. ZINC Plated Steel Fully Threaded Rod / Threaded Bar. Mild Steel Zinc plated All-threaded Stud. All are fully plated with chamfered ends for easy assembly of nut and washers.
Mild Steel Threaded Metric Bar Thread Studding Rod Resin Anchor Stud Bright Zinc - Threaded Studding Threaded BAR / ROD ZINC PLATED-Sizes from M6 upto M16. ZINC Plated Steel Fully Threaded Rod / Threaded Bar. Mild Steel Zinc plated All-threaded Stud. All are fully plated with chamfered ends for easy assembly of nut and washers.
M8 / 8mm STEEL THREADED METRIC BAR THREAD STUDDING ROD RESIN ANCHOR STUD ZINC - Threaded Studding Threaded BAR / ROD ZINC PLATED-Sizes from M6 upto M16. ZINC Plated Steel Fully Threaded Rod / Threaded Bar. Mild Steel Zinc plated All-threaded Stud. All are fully plated with chamfered ends for easy assembly of nut and washers.
M6 / 6mm STEEL THREADED METRIC BAR THREAD STUDDING ROD RESIN ANCHOR STUD ZINC - Threaded Studding Threaded BAR / ROD ZINC PLATED-Sizes from M6 upto M16. ZINC Plated Steel Fully Threaded Rod / Threaded Bar. Mild Steel Zinc plated All-threaded Stud. All are fully plated with chamfered ends for easy assembly of nut and washers.
Mild Steel Allthread Metric Bar Studding Rod Resin Anchor Stud Bright Zinc - Threaded Studding Threaded BAR / ROD ZINC PLATED-Sizes from M6 upto M16. Mild Steel Zinc plated All-threaded Stud. ZINC Plated Steel Fully Threaded Rod / Threaded Bar. All are fully plated with chamfered ends for easy assembly of nut and washers.
M12 / 12mm STEEL THREADED METRIC BAR THREAD STUDDING ROD RESIN ANCHOR STUD ZINC - Threaded Studding Threaded BAR / ROD ZINC PLATED-Sizes from M6 upto M16. ZINC Plated Steel Fully Threaded Rod / Threaded Bar. Mild Steel Zinc plated All-threaded Stud. All are fully plated with chamfered ends for easy assembly of nut and washers.
M10 / 10mm STEEL THREADED METRIC BAR THREAD STUDDING ROD RESIN ANCHOR STUD ZINC - Threaded Studding Threaded BAR / ROD ZINC PLATED-Sizes from M6 upto M16. ZINC Plated Steel Fully Threaded Rod / Threaded Bar. Mild Steel Zinc plated All-threaded Stud. All are fully plated with chamfered ends for easy assembly of nut and washers.
Fully Threaded Metric Bar Studding Rod Zinc Plated Nuts Washers M5 To M30 - Threaded Bar Studding Threaded BAR / ROD ZINC PLATED-Sizes from M5 upto M30. ZINC Plated Steel Fully Threaded Rod / Threaded Bar. You can also chooseFull Nuts, Wing Nuts, Nyloc Nuts or From A Washer from above if you need any of them with the threaded Rod.
Hillman Steelworks 1/4 In. x 1 Ft. Steel Threaded Rod 11007 HILLMAN Steelworks - Zinc threaded course rods are for hangers, anchor bolts, U-bolts, and clamps. Complete with a zinc plated these threaded rods have been electroplated to proved a clean and bright look. Electroplating zinc also protects against rust. Do not weld electroplated products.
Hillman Steelworks 7/16 In. x 3 Ft. Steel Threaded Rod 11023 HILLMAN Steelworks - Zinc threaded course rods are for hangers, anchor bolts, U-bolts, and clamps. Complete with a zinc plated these threaded rods have been electroplated to proved a clean and bright look. Electroplating zinc also protects against rust. Do not weld electroplated products.
7/8-8 Threaded End Stud Hold Down 2-1/4" Thread Length 12" OAL Lot Of 2 - Will there be a dock or forklift. Size: Length: 13 in. Width: 6 in. Height: 6 in. Need it urgently?. Call us and we will do what we can to get it to you quickly. Prefer to pick it up yourself?. To get a freight quote we will need to know the following.
SC08-22Studded Clips, Fit 5/16in (M8) Threaded Rod, 7/8in Tube OD, Bag Of 10 - SC08-22 Studded Clips, Fit 5/16in (M8) Threaded Rod, 7/8in Tube OD, Bag Of 10. Condition is "New". Dispatched with eBay delivery – Packlink 2-3 days. Description: Studded Clips fit directly onto 5/16" (M8) size threaded rods. No tool required to intall. Use for refrigeration, A/C tubing, PEX piping, conduit, and cabling support. The clips are UL2043 compliant and suitable for Plenum spaces. They are heat, light and U.V. stabilized for outdoor use. size 8mm to fit pipes with 7/8" outer diameter. 2b
Rotaloc Male Stud Bonding Fasteners Set Of (20) Stainless Ss-M1-Rb38-1/4-20X1.50 - I am selling a Rotaloc male stud bonding fasteners (set of 20/ 4 packs of 5) ), part # SS-M1-RB38-1/4-20x1.50. This item is new and comes as shown. The male stud bonding fasteners are made of stainless steel stamped 316, threaded post is 1 1/2" length, 1 3/8" perforated base size and thread diameter is 1/4" OD. For more information regarding this item contact a dealer in your area. (LP / 37 B / 9100887) (14) Shipping cost is for the continental United States only (lower 48 States). For shipping outside this area, please inquire about shipping costs before bidding..
M24 x 3.0 Socket Head Cap Screw SHCS 375mm Long - Will there be a dock or forklift. Size: Length: 18 in. Width: 6 in. Height: 6 in. Prefer to pick it up yourself?. Warehouse Location: S1113. To get a freight quote we will need to know the following.
M20 x 2.5 Metric Socket Head Cap Screw SHCS Lass 12.9 230mm Long - Will there be a dock or forklift. Prefer to pick it up yourself?. Weight (lbs, oz): 1,6. Warehouse Location: S1113. To get a freight quote we will need to know the following Need it urgently?. Call us and we will do what we can to get it to you quickly.
Hillman Steelworks 5/8 In. x 1 Ft. Steel Threaded Rod 12051 Pack of 5 HILLMAN - Hot dipped, galvanized threaded, course rod. Baked for corrosion resistance. Threaded rods can bend without cracking or flaking when bent. Thread Size: 5/8" .Length: 12" .Material: Steel .Threads Per Inch: 11 tpi .: Galvanized . pack of 5.
Hillman Steelworks 1/4 In. x 3 Ft. Hardened Steel Threaded Rod 11052 Pack of 5 - All-thread rods are for use wherever, and whenever, tension loads are expected. All-thread oil rods come in 5/16"-18 x 3' and 3/8"-16 x 3' sizes. All threaded rods come in 3-foot lengths. Thread Size: 1/4" .Length: 3' .Material: Hardened Steel .Threads Per Inch: 20 tpi .: Steel . pack of 5.
Hillman Steelworks 1/2 In. x 3 Ft. Steel Threaded Rod 11529 Pack of 5 HILLMAN - Hot dipped, galvanized threaded, course rod. Baked for corrosion resistance. Threaded rods can bend without cracking or flaking when bent. Thread Size: 1/2" .Length: 36" .Material: Steel .Threads Per Inch: 13 tpi .: Galvanized . pack of 5.
Hillman Steelworks 5/8 In. x 3 Ft. Steel Threaded Rod 11530 Pack of 5 HILLMAN - Hot dipped, galvanized threaded, course rod. Baked for corrosion resistance. Threaded rods can bend without cracking or flaking when bent. Thread Size: 5/8" .Length: 36" .Material: Steel .Threads Per Inch: 11 tpi .: Galvanized . pack of 5.
Hillman Steelworks 3/4 In. x 2 Ft. Steel Threaded Rod 12054 Pack of 5 HILLMAN - Hot dipped, galvanized threaded, course rod. Baked for corrosion resistance. Threaded rods can bend without cracking or flaking when bent. Thread Size: 3/4" .Length: 24" .Material: Steel .Threads Per Inch: 10 tpi .: Galvanized . pack of 5.
Hillman Steelworks 5/8 In. x 2 Ft. Steel Threaded Rod 12052 Pack of 5 HILLMAN - Hot dipped, galvanized threaded, course rod. Baked for corrosion resistance. Threaded rods can bend without cracking or flaking when bent. Thread Size: 5/8" .Length: 24" .Material: Steel .Threads Per Inch: 11 tpi .: Galvanized . pack of 5.
Hillman Steelworks 1/2 In. x 1 Ft. Steel Threaded Rod 12049 Pack of 5 HILLMAN - Hot dipped, galvanized threaded, course rod. Baked for corrosion resistance. Threaded rods can bend without cracking or flaking when bent. Thread Size: 1/2" .Length: 12" .Material: Steel .Threads Per Inch: 13 tpi .: Galvanized . pack of 5.
Hillman Steelworks 1/4 In. x 1 Ft. Steel Threaded Rod 11007 Pack of 5 HILLMAN - Zinc threaded course rods are for hangers, anchor bolts, U-bolts, and clamps. Complete with a zinc plated these threaded rods have been electroplated to proved a clean and bright look. Electroplating zinc also protects against rust. Do not weld electroplated products. Thread Size: 1/4" .Length: 1' .Material: Steel .Threads Per Inch: 20 tpi .: Zinc-Plated . pack of 5.
Hillman Steelworks 7/16 In. x 3 Ft. Steel Threaded Rod 11023 Pack of 5 HILLMAN - Zinc threaded course rods are for hangers, anchor bolts, U-bolts, and clamps. Complete with a zinc plated these threaded rods have been electroplated to proved a clean and bright look. Electroplating zinc also protects against rust. Do not weld electroplated products. Thread Size: 7/16" .Length: 3' .Material: Steel .Threads Per Inch: 14 tpi .: Zinc-Plated . pack of 5.
Hillman Steelworks 3/4 In. x 2 Ft. Steel Threaded Rod 11037 Pack of 3 HILLMAN - Zinc threaded course rods are for hangers, anchor bolts, U-bolts, and clamps. Complete with a zinc plated these threaded rods have been electroplated to proved a clean and bright look. Electroplating zinc also protects against rust. Do not weld electroplated products. Thread Size: 3/4" .Length: 2' .Material: Steel .Threads Per Inch: 10 tpi .: Zinc-Plated . pack of 3.
Hillman Steelworks 1/2 In. x 1 Ft. Steel Threaded Rod 11025 Pack of 5 HILLMAN - Zinc threaded course rods are for hangers, anchor bolts, U-bolts, and clamps. Complete with a zinc plated these threaded rods have been electroplated to proved a clean and bright look. Electroplating zinc also protects against rust. Do not weld electroplated products. Thread Size: 1/2" .Length: 1' .Material: Steel .Threads Per Inch: 13 tpi .: Zinc-Plated . pack of 5.
Hillman Steelworks 5/16 In. x 3 Ft. Hardened Steel Threaded Rod 11053 Pack of 5 - All-thread rods are for use wherever, and whenever, tension loads are expected. All-thread oil rods come in 5/16"-18 x 3' and 3/8"-16 x 3' sizes. All threaded rods come in 3-foot lengths. Thread Size: 5/16" Length: 3' Material: Hardened Steel Threads Per Inch: 18 tpi : Steel pack of 5.
Hillman Steelworks 5/8 In. x 3 Ft. Steel Fine Threaded Rod 11072 Pack of 3 - Fine threaded rods are for hangers, anchor bolts, u-bolts, and clamps. Zinc is great for preventing rust and provides a clean look. Thread Size: 5/8" Length: 3' Material: Steel Threads Per Inch: 18 tpi : Zinc-Plated pack of 3.
Hillman Steelworks 1/2 In. x 2 Ft. Steel Threaded Rod 12050 Pack of 5 HILLMAN - Hot dipped, galvanized threaded, course rod. Baked for corrosion resistance. Threaded rods can bend without cracking or flaking when bent. Thread Size: 1/2" Length: 24" Material: Steel Threads Per Inch: 13 tpi : Galvanized pack of 5.
Hillman Steelworks 3/8 In. x 3 Ft. Hardened Steel Threaded Rod 11054 Pack of 5 - All-thread rods are for use wherever, and whenever, tension loads are expected. All-thread oil rods come in 5/16"-18 x 3' and 3/8"-16 x 3' sizes. All threaded rods come in 3-foot lengths. Thread Size: 3/8" Length: 3' Material: Hardened Steel Threads Per Inch: 16 tpi : Steel pack of 5.
Hillman Steelworks 3/8 In. x 3 Ft. Stainless Steel Threaded Rod 11551 Pack of 5 - All-thread 304SS course rods are for hangers, anchor bolts, U-bolts, and clamps. Complete with a zinc-plated these threaded rods are stainless steel to withstand corrosion. Thread Size: 3/8" Length: 3' Material: Stainless Steel Threads Per Inch: 16 tpi : Stainless Steel pack of 5.
Hillman Steelworks 1/2 In. x 3 Ft. Hardened Steel Threaded Rod 11055 Pack of 5 - All-thread rods are for use wherever, and whenever, tension loads are expected. All-thread oil rods come in 5/16"-18 x 3' and 3/8"-16 x 3' sizes. All threaded rods come in 3-foot lengths. Thread Size: 1/2" Length: 3' Material: Hardened Steel Threads Per Inch: 13 tpi : Steel pack of 5.
Qty 50 Hex Rod Coupling Nuts 1/2-13 x 1-1/4" Threaded Rod Connectors Zinc Couple - This Hex Rod Coupling Nuts set includes 50 pieces of zinc-coated connectors that are perfect for threaded rod applications. The nuts have a 1/2-13 thread size and an item length of 1-1/4 inch, making them suitable for industrial and construction use. The brand, Cully, is a trusted name in hardware and fasteners.Designed to provide a secure and stable connection, these coupling nuts are ideal for use in threaded rod assemblies. They are made of high-quality materials that ensure durability and longevity. Whether you are working on a DIY project at home or need fasteners for a large-scale construction project, these Hex Rod Coupling Nuts are an excellent choice.
New 10-32 x 1" Full Threaded Studs, Brass (25ea) - The threaded studs are made from high-quality brass and are manufactured in the United States. Each stud is fully threaded, ensuring a secure and tight fit. Other Information.
1 5/8" X 11" Threaded Rod w/ 2 Nuts 2pcs - 1 5/8" X 11" Threaded Rod w/ 2 Nuts 2pcs.Zinc Coated but a little rusty sitting for awhile.Shipped with Economy Shipping.
Spool Of Thread For Use With Stihl Autocut 25-2 4002-713-3017 Reliable Use - For use with STIHL Autocut 25-2 and 4002-713-3017. For STIHL FS 40, FS 44, 48, 52, 55, 56, 62, 66, 70, 74, 76, 80, 81, 83, 85, 86, 88, 90, F90, 96, 100, 106, 108,100RX, 110, 120, 130, 200, 250, 350, 450, 550, KM 55, 85, 90, FR106, FR108 110, 130, & FS-KM and many more.
M24 Male Thread x M20 Female Draw Bar Rod 27-1/4" OAL - Prefer to pick it up yourself?. To get a freight quote we will need to know the following Need it urgently?. Call us and we will do what we can to get it to you quickly. Size: Length: 30 in. Width: 6 in.
Engineers Studs DIN 939 Or DIN 938 A2 Stainless Steel - M10 X 30 ENGINEERS STUD Din 938 A2 Stainless Steel Overall Length 40mm. M10 X 35 ENGINEERS STUD Din 938 A2 Stainless Steel Overall Length 45mm. M10 X 50 ENGINEERS STUD Din 938 A2 Stainless Steel Overall Length 60mm.
Raymond 115-001-227 1-14 Threaded Double Ended Connector - Prefer to pick it up yourself?. Unless otherwise specifically agreed to in writing by. To get a freight quote we will need to know the following Warehouse Location: S3942. MPN: 115-001-227. LOCAL PICK-UP.
Hillman Steelworks 3/4 In. x 2 Ft. Steel Threaded Rod 11037 HILLMAN Steelworks - Zinc threaded course rods are for hangers, anchor bolts, U-bolts, and clamps. Complete with a zinc plated these threaded rods have been electroplated to proved a clean and bright look. Electroplating zinc also protects against rust. Do not weld electroplated products.
4Pcs M5 M6 M8 M10 Fully Threaded Studding Rod Bar Stainless Steel Right Hand - Description:304 stainless steel, provides great corrosion resistance and antirust ability for a long service life.Fully threaded rods are widely applied in many occasions.Used for assembly fastening, screw into threaded nuts or tapped holes.Specifications:Type: Fully Threaded RodColor: Silver ToneMaterial: 304 stainless steelThread: Right-Hand ThreadThread Dia: M5Total Length: 250mmThread Pitch:0.8mmThread Dia: M6Total Length: 200mm, 250mmThread Pitch:1mmThread Dia: M8Total Length: 150mm,200mmThread Pitch:1.25mmThread Dia: M10Total Length: 150mmThread Pitch:1.5mmPackage Content:4 x Threaded Rod.
Garden Room - Threaded Rod System. Base - Garden Room - Threaded Rod System. All items order from Orbital fasteners44x M24 × 100 × 10mm Square Plate Washer, Galvanised22x M24 x 1 Metre High Tensile Grade 8.8 Studding (Threaded Rod), Steel Bright Zinc Plated110xM24 Hexagon Steel Full Nut Grade 8 Bright Zinc Plated22x M24 (24x72x5.0mm) Form G Mild Steel Bright Zinc Plated, Heavy Duty Penny Mudguard Repair Flat WasherComplete set for 5m X 3m garden room. Collection only
M10-M20 Metric Fully Threaded Rod 30-300mm Lenth A2 Stainless Steel Solid Stud - Material :A2(304) Stainless Steel. Fully Threaded Rods. 304 and 316 are both stainless and acid resistant steel, and both are sanitary grade stainless steel, suitable for use in coastal areas. 201 stainless steel has poor corrosion resistance and a dull surface, even when polished, it still presents a bright black color.
18-8 Stainless Steel Fully Threaded Rod, 3/8"-16 Thread Size, 36" Length, Right - Threaded rods and studs are fasteners that screw into threaded nuts or tapped holes, allowing for assembly of components. The difference between rods and studs is length: In general, a stud is up to 1 foot long, and a rod is more than 1 foot long.
SteelWorks 11004 10-24 x 12" Steel Threaded Rod, Zinc Plated - This SteelWorks 10-24 x 12 in. Threaded Rod is designed for hanging, connecting, clamping and supporting in plumbing, heating and electrical applications and other do-it-yourself projects. This threaded rod features UNC coarse threads, can be drilled, heated, shaped, etc.
SteelWorks 11007 1/4"-20 x 12" Steel Threaded Rod, Zinc Plated - This SteelWorks 1/4 in.-20 x 12 in. Threaded Rod is designed for hanging, connecting, clamping and supporting in plumbing, heating and electrical applications and other do-it-yourself projects. This threaded rod features UNC coarse threads, can be drilled, heated, shaped, etc.
SteelWorks 11006 10-24 x 36" Steel Threaded Rod, Zinc Plated - This SteelWorks 10-24 x 36 in. Threaded Rod is designed for hanging, connecting, clamping and supporting in plumbing, heating and electrical applications and other do-it-yourself projects. This threaded rod features UNC coarse threads, can be drilled, heated, shaped, etc.
SteelWorks 11023 7/16"-14 x 36" Steel Threaded Rod, Zinc Plated - This SteelWorks 7/16 in.-14 x 36 in. Threaded Rod is designed for hanging, connecting, clamping and supporting in plumbing, heating and electrical applications and other do-it-yourself projects. This threaded rod features UNC coarse threads, can be drilled, heated, shaped, etc.
SteelWorks 11045 7/8"-11 x 36" Steel Threaded Rod, Zinc Plated - This SteelWorks 7/8 in.-11 x 36 in. Threaded Rod is designed for hanging, connecting, clamping and supporting in plumbing, heating and electrical applications and other do-it-yourself projects. This threaded rod features UNC coarse threads, can be drilled, heated, shaped, etc.
SteelWorks 11046 1"-8 x 36" Steel Threaded Rod Coarse Thread Zinc Plated - This SteelWorks 1 in.-8 x 36 in. Threaded Rod is designed for hanging, connecting, clamping and supporting in plumbing, heating and electrical applications and other do-it-yourself projects. This threaded rod features UNC coarse threads, can be drilled, heated, shaped, etc.
Timco - Threaded Bars - High Tensile - Grade 8.8 - Zinc. Various Sizes Available - Timco - Threaded Bars - High Tensile - Grade 8.8 - Zinc. Various Sizes Available. Bar ends are yellow for ease of identification and to distinguish from other grades of threaded bar. Manufactured from grade 8.8 high tensile carbon steel.
Fully Threaded Stud 1.5579-12 Rod 2' Long Fine Treaded Crane Hanger Bolt - Lift Tables. 1.5579-12-UNS type. Plain steel type finish. Part Number 24" 1.5579-12-UNS. x 4.00 in. We are not sure of the grade of these bolts. 2' section weights 11.5 lbs. It is neither inferred or implied that any item sold by Arrow Industrial is a product authorized or in any way connected with any manufacturers displayed on our pages.
Fully Threaded Stud 1.0441-16 Rod 18" Long Fine Treaded Crane Bolt Lot of 7 - Lift Tables. We are not sure of the grade of these bolts. 18" section weights 3.5 lbs. Plain steel type finish. Information and Support. Part Number N/A. We are dedicated to understanding the unique challenges and opportunities that each industry faces.
M24- 3.0 x 100mm Double-Ended Threaded Stud Plain Center Black Oxide Lot of 36 - Model M24- 3.0 x 100mm. M24- 3.0 Thread. 100mm Length. Lift Tables. We are dedicated to understanding the unique challenges and opportunities that each industry faces. Lot of 36 Bolts. Available on select orders within USA lower 48 states.
Alinabal CXF-5 5/16" Eye ID 5/16-24 Threaded Rod End Lot Of 7 - Lift Tables. Available on select orders within USA lower 48 states. LET'S STAY IN TOUCH. Part Number CXF-5. Information and Support. We are dedicated to understanding the unique challenges and opportunities that each industry faces.
Timco - Metal Threaded Bars Rods - Carbon Steel - Zinc per Pack of 10 - Finish - Zinc. Material - Carbon Steel. Conveniently cut shorter lengths, commonly used with chemical resin. All orders are dispatched within 48 hours of being cleared. An invoice is provided for all orders.
Timco - Metal Threaded Bars Rods - Carbon Steel - Zinc per Pack of 5 or 10 - Finish - Zinc. Manufactured from grade 4.8 carbon steel. Material - Carbon Steel. Length mm - 1000. Commonly used with drop in anchors for suspending cable trays from ceilings or can be cut to a required length and used with chemical resin.
Ball thread spindle | 20 x 5 | right | 500 mm | steel CF 53 - Kugelgewindespindel | 20 x 5 | rechts. Material Stahl CF 53. Diese werden als ungeprüfte Lagerware verkauft. Länge 500mm. Gewicht ca. 1,1 kg. Weitere Angaben finden Sie evtl.
National Hardware 179291 Steel Threaded Rod 8-32 x 12 inch Zinc Plated - This National Hardware 8-32 x 12 in. Threaded Rod is designed for hanging, connecting, clamping and supporting in plumbing, heating and electrical applications and other do-it-yourself projects. This threaded rod features UNC coarse threads, can be drilled, heated, shaped, etc.
3/8" UNF Solid Brass Threaded Bar Studding Rod DIN975 - 12", 18", 24", 36" UNF Lengths, Solid Brass, All Threaded Bar, Studding, Rod, DIN 975. SOLID BRASS All-Thread Studding can be uséd in the following applications M12 Throughbolts A2 Stainless Steel Heavy Duty Masonry Concrete Anchor.
M2 M3 Fully Threaded Rod Bar Studding Allthread A2 Stainless Steel 304 250mm L - ◪ Material: Stainless steel 304 A2. ◪ Category: Full threaded rod. ◪ Model: 304 national standard wire rod. ◪ Head type: None. ◪ Head drive: None. ◪ Standard type: GB. 💌 Product is on sale, you can get coupons and place order normally.
FK Bearings 3/4" x 3/4" Rod End Bearing pair - F12SB 3-Piece Sintered Bronze Race Spherical Rod End Bearing. 3/4"-16 Thread. Female Thread. Right Hand Thread. Precision Series Rod Ends. ZINC PLATED. LOW CARBON STEEL. 52100 STEEL.
Metric x 500mm A4 316 Stainless Steel Threaded Bar Stud Rod DIN976 - M2 X 500mm THREADED ROD DIN 976-1 A4 STAINLESS STEEL. M2.5 X 500mm THREADED ROD DIN 976-1 A4 STAINLESS STEEL. M3 X 500mm THREADED ROD DIN 976-1 A4 STAINLESS STEEL. M4 X 500mm THREADED ROD DIN 976-1 A4 STAINLESS STEEL.
Lot Brackets Threaded Rod T-Groove Austriebkeil Werzeugaufnahme MK2 - Item clamping iron, threaded rod, T-slot nut, drive wedge, tool holder MK2 more industrial supplies, machines, shelves, tools, spare parts, screws... can be found here Special items/bankruptcy goods We would be very grateful if you gave us 5 stars for each of the detailed evaluations You will automatically receive a positive rating as soon as you have submitted a positive rating. If you are dissatisfied with the delivered item, please contact us before you leave a review. We try to find a reasonable solution to problems. If you have any questions, please always email me directly via ebay, this will be processed with priority, as I can then immediately see what it is about. If the request goes directly to my email address, the answer may take a little longer because I get a lot of spam the.
All America 2"-12 x 12" Fully Threaded Rod Steel Grade 2 All Thread 56117 - *NEW WITHOUT ORIGINAL PACKAGING SHOWING SOME SLIGHT SIGNS OF SHELF WEAR SUCH AS SURFACE RUST PLEASE SEE THE PICTURES* All America 2"-12 x 12" Fully Threaded Rod Steel Grade 2 All Thread 56117. Thread Size 2"-12 Overall Length 12 in Tensile Strength 60,000 psi Material Steel Material Grade/Class Grade 2
ForgeFix 10MUDWASH1250 Flat Mudguard Washers ZP M12 x 50mm Bag 10 - They are bright Zinc Plated for increased corrosion resistance. Flat Mudguard Washers ZP M12 x 50 Bag 10. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.
ForgeFix 10WING5 Wing Nut ZP M5 Bag 10 - These Forgefix Wing Nuts are a convenient alternative to the standard Hex Nut, and allow hand tightening rather than having to use spanners or other tools. The nuts are bright zinc plated for increased corrosion resistance.
1" Threaded Tungsten Rod 1-8 Thread 8-3/32" Long - 1" Threaded Tungsten Rod 1-8 Thread 8-3/32" Long. There is a smooth (unthreaded) section approx. 1/2" long and 1" in diameter. New surplus, old stock. Location - MS3
Remington Pins MT-37 Threaded Studs 50-Pkg. - In most cases, we do not have the capability or knowledge to fully test the functionality of an item other than what were are able to see visually or by simply plugging an item into a wall outlet and seeing if it lights up.
5 Piece M10 Grub Screws/Grub Screws with Lace DIN914 - ISO 4027 V2A - 5 M10 set screws with hexagon socket and tip din 914 - ISO 4027 5 x M10 hexagon socket set screws with cone point din 914 - ISO 4027 Material: A2 stainless steel Size: M10 - different lengths M2 to M10 available in our shop Application: Industry, Crafts, mechanical engineering, model making.
5 Piece M8 Grub Screws/Grub Screws with Lace DIN914 - ISO 4027 V2A - 5 M8 set screws with hexagon socket and tip din 914 - ISO 4027 5 x M8 hexagon socket set screws with cone point din 914 - ISO 4027 Material: A2 stainless steel Size: M8 - different lengths from M2 to M10 available in our shop Application: Industry, Crafts, mechanical engineering, model making.
5 Piece M3 Grub Screws/Grub Screws with Lace DIN914 - ISO 4027 V2A - 5 M3 set screws with hexagon socket and tip din 914 - ISO 4027 5 x M3 hexagon socket set screws with cone point din 914 - ISO 4027 Material: A2 stainless steel Size: M3 - different lengths from M2 to M10 available in our shop Application: Industry, Crafts, mechanical engineering, model making.
5 Piece - M10 - Grub Screws/Grub Screws With Flat Point DIN913 A2 Iso 4026 - 5 M10 grub screws with hexagon socket and conical tip din 913 - ISO 4026 5x M10 hexagon socket set screws with flat point din 913 - ISO 4026 Material: A2 stainless steel Size: M10 M2 to M12 available in our shop Application: industry, trade, mechanical engineering, Modelling.
5 Piece - M4 - Grub Screws/Grub Screws With Flat Point DIN913 A2 Iso 4026 - 5 M4 grub screws with hexagon socket and conical tip din 913 - ISO 4026 5x M4 hexagon socket set screws with flat point din 913 - ISO 4026 Material: A2 stainless steel Size: M4 M2 to M12 available in our shop Application: industry, trade, mechanical engineering, Modelling.
4Pcs M6 x 150mm Fully Threaded Rod 304 Stainless Steel Right Hand Threads - Description:304 stainless steel, provides great corrosion resistance and antirust ability for a long service life.Fully threaded rods are widely applied in many occasions.Used for assembly fastening, screw into threaded nuts or tapped holes.Specifications:Type: Fully Threaded RodColor: Silver ToneThread Dia: M6Material: 304 stainless steelTotal Length: 150mmThread: Right-Hand ThreadThread Pitch:1mmPackage Content:4 x Threaded Rod.
4Pcs M5 x 200mm Fully Threaded Rod 304 Stainless Steel Right Hand Threads - Description:304 stainless steel, provides great corrosion resistance and antirust ability for a long service life.Fully threaded rods are widely applied in many occasions.Used for assembly fastening, screw into threaded nuts or tapped holes.Specifications:Type: Fully Threaded RodColor: Silver ToneThread Dia: M5Material: 304 stainless steelTotal Length: 200mmThread: Right-Hand ThreadThread Pitch:0.8mmPackage Content:4 x Threaded Rod.
4Pcs M4 x 150mm Fully Threaded Rod 304 Stainless Steel Right Hand Threads - Description:304 stainless steel, provides great corrosion resistance and antirust ability for a long service life.Fully threaded rods are widely applied in many occasions.Used for assembly fastening, screw into threaded nuts or tapped holes.Specifications:Type: Fully Threaded RodColor: Silver ToneThread Dia: M4Material: 304 stainless steelTotal Length: 150mmThread: Right-Hand ThreadThread Pitch:0.7mmPackage Content:4 x Threaded Rod.
4Pcs M8 x 250mm Fully Threaded Rod 304 Stainless Steel Right Hand Threads - Description:304 stainless steel, provides great corrosion resistance and antirust ability for a long service life.Fully threaded rods are widely applied in many occasions.Used for assembly fastening, screw into threaded nuts or tapped holes.Specifications:Type: Fully Threaded RodColor: Silver ToneThread Dia: M8Material: 304 stainless steelTotal Length: 250mmThread: Right-Hand ThreadThread Pitch:1.25mmPackage Content:4 x Threaded Rod.
M2.5-M8 Metric Fully Threaded Rod 16-300mm Lenth A2 Stainless Steel Solid Stud - Material :A2(304) Stainless Steel. Fully Threaded Rods. 304 and 316 are both stainless and acid resistant steel, and both are sanitary grade stainless steel, suitable for use in coastal areas. 201 stainless steel has poor corrosion resistance and a dull surface, even when polished, it still presents a bright black color.
Two Threaded Rods - 1/2-20 Thread Size - The item length varies, and the unit quantity is two. These rods are designed for use in fastening applications and are compatible with a wide range of hardware. The model and country/region of manufacture are unknown.
36 inch Long 1/2-20 Thread Size Fully Threaded Rod - It is a versatile piece of hardware that can be used in various industries. The rod is a great addition to any project that requires a strong and durable fastening solution.
4Pcs M5 x 150mm Fully Threaded Rod 304 Stainless Steel Right Hand Threads - Description:304 stainless steel, provides great corrosion resistance and antirust ability for a long service life.Fully threaded rods are widely applied in many occasions.Used for assembly fastening, screw into threaded nuts or tapped holes.Specifications:Type: Fully Threaded RodColor: Silver ToneThread Dia: M5Material: 304 stainless steelTotal Length: 150mmThread: Right-Hand ThreadThread Pitch:0.8mmPackage Content:4 x Threaded Rod.
Simpson Strong-Tie CNW7/8-5/8 - 7/8" to 5/8" Coupler Nut w/ Witness Hole - The Witness Hole. Tighten the two rods until each all-thread rod is visible in the Witness Hole. Any portion of thread visible in the Witness Hole is a correct installation. The CNW exceeds the specified minimum tensile capacity of corresponding ASTM A36 bolts and threaded rod.
Simpson Strong-Tie CNW1 - 1" Coupler Nut w/ Witness Hole - The Witness Hole. Tighten the two rods until each all-thread rod is visible in the Witness Hole. Any portion of thread visible in the Witness Hole is a correct installation. The CNW exceeds the specified minimum tensile capacity of corresponding ASTM A36 bolts and threaded rod.
Angle Reducer Reducers Spacers Rod End Joint High Misalignment Spacer - Can be used as a spacer as well as a reducer. Allows free rotation of the ball as the lip slides inside the joint housing. Ideal for applications where the bore size on the rod end needs to be reduced to take a smaller bolt.
4Pcs M4 x 250mm Fully Threaded Rod 304 Stainless Steel Right Hand Threads - Description:304 stainless steel, provides great corrosion resistance and antirust ability for a long service life.Fully threaded rods are widely applied in many occasions.Used for assembly fastening, screw into threaded nuts or tapped holes.Specifications:Type: Fully Threaded RodColor: Silver ToneThread Dia: M4Material: 304 stainless steelTotal Length: 250mmThread: Right-Hand ThreadThread Pitch:0.7mmPackage Content:4 x Threaded Rod.
18-8 Stainless Steel Threaded Rod 1/2"-13 Thread 5-1/2" Long Qty: 4 - This 18-8 Stainless Steel Threaded Rod comes with a 1/2 inch diameter and 1/2"-13 thread. The item length is 12 inches and the rod is 5-1/2 inches long. It is made of high-quality stainless steel material with a plain finish. The alloy used in this item is 18-8, and it has been manufactured by Online Metal Supply. The rod is designed for use in various applications and is suitable for commercial and industrial use. This item is sold in a pack of 4 and is perfect for threaded rods and threaded studs. With its high-quality material and excellent finish, this threaded rod will provide you with the strength and durability needed for your projects.
A2 Stainless Steel Left Thread Fully Threaded Rod Bar Studding M4 M5 M6 M8 -M24 - M6 1mm M24 3mm. M8 1.25mm M27 3mm. M4 0.7mm M20 2.5mm. -Material: 304(A2) Stainless Steel. M5 0.8mm M22 2.5mm. Thread Pitch Thread Pitch. -304 stainless steel is selected as the product, which has the characteristics of good corrosion resistance, oxidation resistance and heat resistance, high strength and high toughness.
3/8" UNF Solid Brass Threaded Bar Studding Rod DIN975 - 12", 18", 24", 36" UNF Lengths, Solid Brass, All Threaded Bar, Studding, Rod, DIN 975. SOLID BRASS All-Thread Studding can be uséd in the following applications UNF 5/8" Socket Cap Screw High Tensile 12.9 Self Colour DIN912.
3/8" UNF Solid Brass Threaded Bar Studding Rod DIN975 - 12", 18", 24", 36" UNF Lengths, Solid Brass, All Threaded Bar, Studding, Rod, DIN 975. SOLID BRASS All-Thread Studding can be uséd in the following applications Direct Deposit. Can be uséd in repairs and to secure parts together.
Stange Description DV6-800 30Ø - Item description for the offer: ■ DV6-800 30Ø Dimensions: approx. 66cm length x 3cm diameter weight: approx. 3.6kg Condition: see pictures below payment You will receive payment information after purchase. For multiple purchases, the shipping costs merged to a minimum. Then please wait with the payment on an invoice adjusted by us. Open questions please BEFORE clarify the purchase. gw.
Lot bearing BF10 | storage unit for spindle | 8 mm - Lagereinheit für Spindel. Loslager BF10. Diese werden als ungeprüfte Lagerware verkauft. mit 8mm Spindelendenbearbeitung. Condition: new. Gewicht ca. 247 g.
3/8-16 x 2 1/4 (FT) Coarse Grade B7 Stud End to End Zinc Plated - Thread Pitch Type: Coarse. Fastener Type: Stud End to End. Finish: Zinc Plated. Thread Pitch: 16. Studs are a relatively long rod that is threaded on both ends; the thread may extend along the complete length of the rod and are designed to be used in tension.
Forgefix - Threaded Rod Stainless Steel M8 x 1m Single - These Forgefix Threaded Rods are made of A2 stainless steel, which will not corrode, rust or stain from water. This makes them ideally suited for corrosive and coastal applications as well as many other varied applications.
Forgefix - Threaded Rod Stainless Steel M10 x 1m Single - These Forgefix Threaded Rods are made of A2 stainless steel, which will not corrode, rust or stain from water. This makes them ideally suited for corrosive and coastal applications as well as many other varied applications.
Forgefix - Threaded Rod Stainless Steel M12 x 1m Single - These Forgefix Threaded Rods are made of A2 stainless steel, which will not corrode, rust or stain from water. This makes them ideally suited for corrosive and coastal applications as well as many other varied applications.
Forgefix - Threaded Rod Stainless Steel M6 x 1m Single - These Forgefix Threaded Rods are made of A2 stainless steel, which will not corrode, rust or stain from water. This makes them ideally suited for corrosive and coastal applications as well as many other varied applications.
4Pcs M4 x 200mm Fully Threaded Rod 304 Stainless Steel Right Hand Threads - Description:304 stainless steel, provides great corrosion resistance and antirust ability for a long service life.Fully threaded rods are widely applied in many occasions.Used for assembly fastening, screw into threaded nuts or tapped holes.Specifications:Type: Fully Threaded RodColor: Silver ToneThread Dia: M4Material: 304 stainless steelTotal Length: 200mmThread: Right-Hand ThreadThread Pitch:0.7mmPackage Content:4 x Threaded Rod.
M00497-FS MOREZMORE HPA 10 Threaded 8 mm 8mm Stainless Steel Ball M3 HALF Thread - A stone-paved path leads to Morezmore Studio. The Morezmore Estate. Humanly Posable Armature (HPA) Parts. Thread: M3 Half Thread (4mm deep hole). 10 Threaded Balls. Northern wing of the estate. If you are planning to use it with our compression plates, you will need M2 12mm screws.
M00497x5 MOREZMORE HPA 50 Threaded 8 mm 8mm Stainless Steel Balls M3 HALF Thread - A stone-paved path leads to Morezmore Studio. The Morezmore Estate. Humanly Posable Armature (HPA) Parts. Thread: M3 Half Thread (4mm deep hole). 50 Threaded Balls. Northern wing of the estate. If you are planning to use it with our compression plates, you will need M2 12mm screws.
M00451 MOREZMORE HPA 10 Threaded 6 mm Stainless Steel Balls M3 HALF Thread - A stone-paved path leads to Morezmore Studio. The Morezmore Estate. Humanly Posable Armature (HPA) Parts. Thread: M3 Half Thread (3mm deep hole). 10 Threaded Balls. Northern wing of the estate. Stainless Steel (non-magnetic).
M00497 MOREZMORE HPA 10 Threaded 8 mm 8mm Stainless Steel Balls M3 HALF Thread - A stone-paved path leads to Morezmore Studio. The Morezmore Estate. Humanly Posable Armature (HPA) Parts. Thread: M3 Half Thread (4mm deep hole). 10 Threaded Balls. Northern wing of the estate. If you are planning to use it with our compression plates, you will need M2 12mm screws.
M01154 MOREZMORE HPA 2 Stop Motion Puppet Armature Threaded Foot Feet Tie-Down - A stone-paved path leads to Morezmore Studio. The Morezmore Estate. Humanly Posable Armature (HPA) Parts. For details on Humanly Posable Armature. "Instructions for Humanly Posable Armature Kits". 2 L-shaped Threaded rod 2 wing nuts.
M00451x5 MOREZMORE HPA 50 Threaded 6 mm Stainless Steel Balls M3 HALF Thread - A stone-paved path leads to Morezmore Studio. The Morezmore Estate. Humanly Posable Armature (HPA) Parts. Thread: M3 Half Thread (3mm deep hole). 50 Threaded Balls. Northern wing of the estate. Stainless Steel (non-magnetic).
A2 Stainless Steel Thraded Rod Bar Studding M3 M4 M5 M6 M8 M10 M12 - A2 304 Grade Stainless Steel Thread Rod Bar Studding. Stainless Steel threaded rod can be used for many different applications that require a non-rusting, corrosion resistant fixing. All cut ends are machined to provide a lead in for nuts.
M00031 MOREZMORE HPA 10 Threaded 5mm Stainless Steel Balls M2 Full Thread - A stone-paved path leads to Morezmore Studio. The Morezmore Estate. Humanly Posable Armature (HPA) Parts. Thread: M2 full through thread. 10 Threaded Balls. Northern wing of the estate. Stainless Steel (non-magnetic).
Stainless Machine Mounting Foot 5/8" rod 3" Pad 9 5/8" long - Threaded Machine Mounting Foot loc: #28 S71. 5/8" threaded rod. 3" Pad / base. Threaded shaft is 7 1/4". No warranty beyond that. I have made an honest and fair evaluation of this item, but I am only human.
ForgeFix Flat Mudguard Washers ZP M12 x 50mm Bag 10 - Flat Mudguard Washers ZP M12 x 50 Bag 10. Important Links. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools. Garden Tools.
Simpson Strong-Tie ATR3/8X24 - 3/8 x 24" All-Thread Rod Plain Carbon Steel - Fewer anchor bolts and fasteners, along with easy access to the top and bottom of the wall, result in more efficient installation. u = 58 ksi and not to exceed 80 ksi. Design procedures that account for cumulative overturning.
(20 Pcs.) 316 Stainless Steel Studs M12 x 1.75 x 80mm ~NEW~ - Size: M12 x 1.75" x 80 mm. Stainless Steel Studs. Fully Threaded Studs. Material:Stainless Steel. Unless other provisions are necessary. #: Cab A 18. Condition:~NEW~. Total Wt: 3 lbs.
Metric Self Colour HT 8.8 Threaded Bar Stud Rod 1m - Applications of Threaded Bar, Self-Colour, High Tensile (8.8) Studding/ Bar/ Rod. 1000mm lengths of Threaded Studding/ Bar/ Rod/, Self-Colour, High Tensile, 8.8 Grade. Chemical Anchor. Threaded Bar, Self-Colour.
3/8 16 threaded rod 7" long( set of 3) - 3/8 16 threaded rod. These were cut off from an operator shaft. There is nothing wrong with them. Each is a minimum of 7 inches.
3/8 16 threaded rod 14" long (set of 4) - 3/8 16 threaded rod. These were cut off from an operator shaft. There is nothing wrong with them. Each is a minimum of 14 inches.
3/8 16 threaded rod 12" long (set of 4) - 3/8 16 threaded rod. These were cut off from an operator shaft. There is nothing wrong with them. Each is a minimum of 12.5 inches.
BSW x 18" Self Colour Grade 4.8 All Threaded Bar Rod Din 976 - BSW Allthread Studding can be uséd in the following applications 36 x 3/16 BSW M.S Allthread Self Colour x 18". 36 X 1/4 BSW M.S. Allthread Self Colour x 18". 36 X 5/16 BSW M.S. Allthread Self Colour x 18".
BSW x Various Lengths Self Colour Grade 4.8 All Thread Bar Din 976 - BSW Allthread Studding can be uséd in the following applications 36 x 3/16 BSW M.S Allthread Self Colourx 12", 18", 24", 36". 36 X 1/4 BSW M.S. Allthread Self Colourx 12", 18", 24",36". 36 X 5/16 BSW M.S. Allthread Self Colourx 12", 18", 24", 36".
BSW x 1yd Self Colour Grade 4.8 All Threaded Bar Rod Din 976 - 36 x 3/16 BSW M.S Allthread Self Colour x 1yd Lengths. 36 X 1/4 BSW M.S. Allthread Self Colour x 1yd Lengths. 36 X 5/16 BSW M.S. Allthread Self Colour x 1yd Lengths. 36 X 3/8 BSW M.S. Allthread Self Colour x 1yd Lengths.
Simpson Strong-Tie ATR7/8X12 - 7/8" x 12" All-Thread Rod Plain Carbon Steel - Fewer anchor bolts and fasteners, along with easy access to the top and bottom of the wall, result in more efficient installation. u = 58 ksi and not to exceed 80 ksi. Design procedures that account for cumulative overturning.
1"-8 X 7-1/4" Threaded Rods W/ 7/8"-9 Heavy Hex Nuts Lot Of 5 - 1"-8 X 7-1/4" THREADED RODS W/ 7/8"-9 HEAVY HEX NUTS. (5) 1"-8 X 7-1/4" THREADED RODS. (10) 7/8"-9 HEAVY HEX NUTS. THREAD STYLE: FULLY THREADED. THREAD TYPE: COARSE. LOT OF 5 . APPROXIMATE WEIGHT: 14 LBS.
1/2" X 13 Thread Rod Couplings (40) - 1/2" X 13 Thread Rod Couplings (40). Lot of 40 pieces Mix of new old stock and reclaimed. Most are off the shelf perfect, some may contain tarnish or minor corrosion spots Zinc coated steel
1/4 BSF threaded rod bar studding - steel - 300mm long - optional nuts & washers - This is a set of 1/4 BSF (British Standard Fine) imperial threaded rod/studding, made from self-coloured steel. The price is for one 300 mm length. It can be supplied as plain threaded rod (no nuts & washers), or with 2, 4, 6, 8, 10 or 12 nuts & washers included.
3/8" Stainless Steel Threaded Rod 12 Inch, 5 Pcs w/ Stainless Nuts and Hanger - 3/8" Stainless Steel Threaded Rod 12 Inch, 5 Pcs w/ Stainless Nuts and Hanger. Package contains qty of 5, 3/8" X 12 Inch Stainless Steel Threaded Rod, qty of 20 3/8" Nuts, qty of 10 3/8" Lock Washers and qty of 5 Hanger Hardware Brackets. All hardware is Stainless Steel. Includes all parts shown in the pictures.
3/8" Stainless Steel Threaded Rod 9.5 Inch,10 Pcs w/ Stainless Nuts and Washers - 3/8" Stainless Steel Threaded Rod 9.5 Inch,10 Pcs w/ Stainless Nuts and Washers. Package contains qty of 10, 3/8" X 9.5 Inch Stainless Steel Threaded Rod, qty of 30 3/8" Nuts, qty of 20 3/8" Lock Washers and qty of 50 3/8" Flat Washers. All hardware is Stainless Steel. Includes all parts shown in the pictures.
Simpson Strong-Tie CNW5/8-1/2 - 5/8" to 1/2" Coupler Nut w/ Witness Hole - The Witness Hole. Tighten the two rods until each all-thread rod is visible in the Witness Hole. Any portion of thread visible in the Witness Hole is a correct installation. The CNW exceeds the specified minimum tensile capacity of corresponding ASTM A36 bolts and threaded rod.
Metric Various Lengths Galvanised Grade 8.8 All Thread Bar Stud Rod DIN976 - M8, M10, M12, M16, M20, M24, M30 x Various Lengths, Galvanised, High Tensile 8.8, Threaded Bar / Studding/ Rod. 1000mm Galvanised, High Tensile 8.8, Threaded Studding/ Bar/ Rod, DIN 976-1. M8 x 1mtr HT Allthread Galvanised Grade 8.8.
Metric 1m Galvanised Grade 8.8 Threaded Bar Stud Rod DIN976 - Galvanised, High Tensile 8.8, Steel Material Properties Suitable for applications prone to chemical corrosion e.g. Salt Water. 1m Lengths, M8, M10, M12, M16, M20, M24, M30, 100cm lengths, Galvanised, High Tensile 8.8, Threaded Studding/ Bar/ Rod.
Metric Self Colour HT 8.8 All Thread Bar Stud Rod 500mm - Chemical Anchor. Applications of Threaded Bar, Self-Colour, High Tensile (8.8) Studding/ Bar/ Rod. M6 X 1mtr H.T. Allthread Gr.8.8 Self Colour. M8 X 1mtr H.T. Allthread Gr.8.8 Self Colour. M10 X 1mtr H.T. Allthread Gr.8.8 Self Colour.
UNF 18" Self Colour Threaded Bar Stud Rod Steel Mild Steel 4.8 - 36” X 1/4 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 5/16 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 3/8 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 1/2 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 5/8 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 3/4 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 7/8 UNF Mild Steel 4.8 Threaded Bar Self Colour Image is for illustrative purposes only.
UNC 36" 1yd Threaded Bar Stud Rod Steel 4.8 - 36"/ 3ft/ 1 yard Lengths - UNC (Unified Coarse Thread) Threaded Studding/ Bar/ Rod 4.8 Mild Steel, DIN 976. 36 X 3/16 UNC 24 tpi Mild Steel 4.8 Allthread Self Colour. 36 X 1/4 UNC 20 tpi Mild Steel 4.8 Allthread Self Colour.
UNF 36" 1yd Self Colour Threaded Bar Stud Rod Steel Mild Steel 4.8 - 36” X 1/4 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 5/16 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 3/8 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 1/2 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 5/8 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 3/4 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 7/8 UNF Mild Steel 4.8 Threaded Bar Self Colour Image is for illustrative purposes only.
Metric x 500mm Galvanised Grade 8.8 All Thread Bar Studding Rod DIN976 - 50cm Lengths of M8, M10, M12, M16, M20, M24, M30, 50cm lengths, Galvanised, High Tensile 8.8, Threaded Studding/ Bar/ Rod, DIN 976-1. 1000mm Galvanised, High Tensile 8.8, Threaded Studding/ Bar/ Rod, DIN 976-1.
Threaded 4" Rods B7 Blue Teflon Coated, 5/8"-11 w/ Nuts *Lot of (8)* (No Box) - Threaded 4" Rods B7 Blue Teflon Coated, 5/8"-11 w/ Nuts Lot of (8) (No Box) Threaded 4" Rods B7 Blue Teflon Coated, IAFA NDF, 5/8"-11 w/ Nuts Lot of (8) , New-No Box. Threaded 4" Rods B7 Blue Teflon Coated, IAFA NDF, 5/8"-11 w/ Nuts Lot of (8) , New-No Box.
TBS-436-21 C1662 With Splines on the Outside - TBS-436-21 C1662 With Splines on Each End. We do the best research we can and represent the item(s) as clearly and honestly as possible. Ask all ?????.
Fischer stud bolts 8No. FTR M16 x 190 - They are FTR M16 x 190, see the photo of the box label for all the information I have. A set of 8 Fischer studs / bolts with washer and nut. There are 8 in the box as I used 2 out o a box of 10.
11x M24 Threaded Rod Pin Screw Threaded Bolt Studs Twin-Threaded #E - VAT is already included in the amount and is shown separately for use with slot nuts for clamping on a slot table more industrial supplies, machines, shelves, tools, spare parts, screws... can be found here Special items/bankruptcy goods We would be very grateful if you gave us 5 stars for each of the detailed evaluations You will automatically receive a positive rating as soon as you have submitted a positive rating. If you are dissatisfied with the delivered item, please contact us before you leave a review. We try to find a reasonable solution to problems. If you have any questions, please always email me directly via ebay, this will be processed with priority, as I can then immediately see what it is about. If the request goes directly to my email address, the answer may take a little.
M24 Threaded Rod Nut T-Groove Threaded Bolt Twin-Threaded #A - VAT is already included in the amount and is shown separately for use with slot nuts for clamping on a slot table more industrial supplies, machines, shelves, tools, spare parts, screws... can be found here Special items/bankruptcy goods We would be very grateful if you gave us 5 stars for each of the detailed evaluations You will automatically receive a positive rating as soon as you have submitted a positive rating. If you are dissatisfied with the delivered item, please contact us before you leave a review. We try to find a reasonable solution to problems. If you have any questions, please always email me directly via ebay, this will be processed with priority, as I can then immediately see what it is about. If the request goes directly to my email address, the answer may take a little.
14x M12 M16 M24 M30 Threaded Rod Threaded Bolt Studs Twin-Threaded - VAT is already included in the amount and is shown separately for use with slot nuts for clamping on a slot table and others more industrial supplies, machines, shelves, tools, spare parts, screws... can be found here Special items/bankruptcy goods We would be very grateful if you gave us 5 stars for each of the detailed evaluations You will automatically receive a positive rating as soon as you have submitted a positive rating. If you are dissatisfied with the delivered item, please contact us before you leave a review. We try to find a reasonable solution to problems. If you have any questions, please always email me directly via ebay, this will be processed with priority, as I can then immediately see what it is about. If the request goes directly to my email address, the answer may ta.
6x M24 Threaded Rod Pin Screw Threaded Bolt Studs Twin-Threaded #C - VAT is already included in the amount and is shown separately Thread length: 3X 170mm + 30mm, 1X 120mm + 30mm and 1X 100mm + 30mm more industrial supplies, machines, shelves, tools, spare parts, screws... can be found here Special items/bankruptcy goods We would be very grateful if you gave us 5 stars for each of the detailed evaluations You will automatically receive a positive rating as soon as you have submitted a positive rating. If you are dissatisfied with the delivered item, please contact us before you leave a review. We try to find a reasonable solution to problems. If you have any questions, please always email me directly via ebay, this will be processed with priority, as I can then immediately see what it is about. If the request goes directly to my email address, the answer m.
11x M24 threaded rod pen screw threaded bolt stud double thread #E - 11x M24 Gewindestange Stiftschraube Gewindebolzen #E. Gewinde M24. ist bereits im Betrag enthalten und wird separat ausgewiesen. für die Verwendung mit Nutenmuttern zum Spannen auf einem Nutentisch. Sehr Schnell.
M24 Threaded Rod Nut T-Slotstone Threaded Bolt Double Thread #A - M24 Gewindestange Mutter T-Nutenstein #A. Gewinde M24 mit Mutter und T-Nutenstein. Sehr genau. für die Verwendung mit Nutenmuttern zum Spannen auf einem Nutentisch. ist bereits im Betrag enthalten und wird separat ausgewiesen.
Metric Zinc BZP Mild Steel 4.8 All Threaded Bar Stud Rod 500mm - M5x1000mm Threaded Rod Din976 G4.8 BZP CR3. M6x1000mm Threaded Rod Din976 Gr4.8 BZP CR3. M8x1000mm Threaded Rod Din976 Gr4.8 BZP CR3. M10x1000mm Threaded Rod Din976 Gr4.8 BZP CR3. M12x1000mm Threaded Rod Din976 Gr4.8 BZP CR3.
Metric Zinc BZP 4.8 All Threaded Bar Stud Rod 100mm 250mm 500mm - Undercut studs are designed to better distribute axial stresses. In a full-bodied stud the stresses are greater in the threads than in the shank. Undercut studs are only required in applications where the stud is exposed to fatigue.
M3 4 5 6 8 10 12 14 16 18 20 22 24 30 x Cut 4.8 Threaded Bar Stud Rod Zinc BZP - Undercut studs are designed to better distribute axial stresses. In a full-bodied stud the stresses are greater in the threads than in the shank. Undercut studs are only required in applications where the stud is exposed to fatigue.
Fully Threaded Rod W/ Hex Nuts Attached #Hyb7 2.5 3-1/8" Lot Of 10 - YOU WILL RECEIVE WHAT IS PICTURED, NOTHING LESS NOTHING MORE. APPROXIMATE WEIGHT: 5 LBS. APPROXIMATE WEIGHT: 4.8 LBS. AE/477/SC4 F-2/(13)SMN. LBP/#119/SC7 I-3/(1)TR PFR. FULLY THREADED ROD WITH HEX NUTS ATTACHED.
1.25” Rod End Heim Joint KIT Left and Right thread - These massive heim joints are the best you can buy. The race is teflon impregnated nylon for superior durability. These rod ends have a 1.25” Shaft with 12tpi. The 1” bore is the strongest way to make this heim.
Metric Self Colour Grade 4.8 Threaded Bar Stud Rod 500mm - Chemical Anchor. Direct Deposit. All-Thread Studding can be uséd in the following applications Can be uséd in repairs and to secure parts together. Image is for illustrative purposes only. You might also like.
M4 5 6 8 10 12 14 16 18 20 22 24 30 36 x 500mm 4.8 Threaded Bar Stud Self Colour - 50cm S/Col Studding – M4. Chemical Anchor. UNF 5/8" Socket Cap Screw High Tensile 12.9 Self Colour DIN912. Direct Deposit. M10 Socket Cap Allen Screw Bolt A2/304 Stainless Steel DIN 912. M10 Socket Screw Button Round A2 304 Stainless Steel DIN 9427.
M3,4,5,6 Double End Threaded Rod Bar Bolt Stud Connector A2 304 Stainless Steel - Double End Threaded Rod Bar Studs Specification: Material: A2 304 Stainless Steel Type: Threaded Rod (Threaded on Both Ends) Thead: Metric / Coarse Thread Thread Diameter: M3 M4 M5 M6 Thread Pitch: M3*0.5; M4*0.7; M5*0.8; M6*1 For specific parameters, pls refer to the attached parameter diagram. Specification Eg: M3 x 20mm ( Thread Diameter d = 3mm; Length L = 10mm) Packing: Plastic bag / Carton box Brand: GooBetter Fastener.
M6 M8 M10 M12 Double End Threaded Rod Bar Bolt Stud Connector A4 Stainless Steel - Double End Threaded Rod Bar Studs Specification: Material: A4 316 Stainless Steel Type: Threaded Rod (Threaded on Both Ends) Thead: Metric / Coarse Thread Thread Diameter: M6 M8 M10 M12 Thread Pitch: M6*1; M8*1.25; M10*1.5; M12*1.75 For specific parameters, pls refer to the attached parameter diagram. Specification Eg: M6 x 20mm ( Thread Diameter d = 6mm; Length L = 10mm) Packing: Plastic bag / Carton box Brand: GooBetter Fastener.
Metric Self Colour HT 8.8 Threaded Bar Stud Rod 1m - Applications of Threaded Bar, Self-Colour, High Tensile (8.8) Studding/ Bar/ Rod. 1000mm lengths of Threaded Studding/ Bar/ Rod/, Self-Colour, High Tensile, 8.8 Grade. Chemical Anchor. Threaded Bar, Self-Colour.
Angelo 12" Brass Finish Down Rod 77042 -NOS - 12″ POLISHED BRASS FINISH. 8 COUNT AVAILABLE. LIGHTING/FAN DOWN ROD. about buying the item. • Local pick up. different condition than stated in the ad. If your item is. received in a different condition than stated (DOA, not. ).
Fully Threaded Rod/Rod/Stud/Fully Threaded Brass Stud M2 M2.5 M3 M4/M5-M20 - Size: M2 M2.5 M3 M4 M5 M6 M8 M10 M12 M14 M16 M18 M20. The specification is composed of D L, for example: M2 0.25m (L stands for length). H59-3 brass is widely used in the manufacture of pins, screws, gaskets, hardware, pipe fittings, bearing retainers, etc.
Chemical Anchor Resin Studs A2/ 304 Stainless Steel - Installation Guide Check that the substrate you are fixing to is stable Use the chart to find the correct drill bit to use. Use a suitable chemical resin Gently turn the stud as you depress it down wards (sit around 10mm from the bottom of the hole).
Metric Various Lengths Galvanised Grade 8.8 All Thread Bar Stud Rod DIN976 - M8, M10, M12, M16, M20, M24, M30 x Various Lengths, Galvanised, High Tensile 8.8, Threaded Bar / Studding/ Rod. 1000mm Galvanised, High Tensile 8.8, Threaded Studding/ Bar/ Rod, DIN 976-1. M8 x 1mtr HT Allthread Galvanised Grade 8.8.
Metric Self Colour HT 8.8 All Thread Bar Stud Rod 500mm - Chemical Anchor. Applications of Threaded Bar, Self-Colour, High Tensile (8.8) Studding/ Bar/ Rod. M6 X 1mtr H.T. Allthread Gr.8.8 Self Colour. M8 X 1mtr H.T. Allthread Gr.8.8 Self Colour. M10 X 1mtr H.T. Allthread Gr.8.8 Self Colour.
Metric Zinc BZP HT 8.8 All Threaded Bar Stud Rod 500mm - M6 X 1Mtr Ht Allthread Gr8.8 Zp. M8 X 1Mtr Ht Allthread Gr8.8 Zp. M10 X 1Mtr Ht Allthread Gr8.8 Zp. M12 X 1Mtr Ht Allthread Gr8.8 Zp. M16 X 1Mtr Ht Allthread Gr8.8 Zp. M20 X 1Mtr Ht Allthread Gr8.8 Zp.
Metric Zinc BZP HT 8.8 All Threaded Bar Stud 100mm 250mm 500mm - M6 X 1Mtr Ht Allthread Gr8.8 Zp. M8 X 1Mtr Ht Allthread Gr8.8 Zp. M10 X 1Mtr Ht Allthread Gr8.8 Zp. M12 X 1Mtr Ht Allthread Gr8.8 Zp. M16 X 1Mtr Ht Allthread Gr8.8 Zp. M20 X 1Mtr Ht Allthread Gr8.8 Zp.
ETA Approved Chemical Anchor Resin Studs A4 Stainless Steel JCP - ETA Approved Chemical Anchor Resin Studs A4 Stainless Steel JCP C. E., ETA Approved M8, M10, M12, M16, M20, M24 J.C.P, A4/ 316 Stainless Steel, Chemical Anchor Studs, Chisel Tip. Installation Guide Check that the substrate you are fixing to is stable Use the chart to find the correct drill bit to use.
ETA Approved Chemical Anchor Resin Studs Galvanised Steel JCP - ETA Approved Chemical Anchor Resin Studs Galvanised Steel JCP C. E., ETA Approved M8, M10, M12, M16, M20, M24 J.C.P, 5.8 Grade Galvanised Steel, Chemical Anchor Studs, Chisel Tip. Installation Guide Check that the substrate you are fixing to is stable Use the chart to find the correct drill bit to use.
ETA Approved Chemical Anchor Resin Studs A2/ 304 Stainless JCP - ETA Approved Chemical Anchor Resin Studs A2/ 304 Stainless JCP C. E., ETA Approved M8, M10, M12, M16, M20, M24 J.C.P, A2/ 304 Stainless Steel, Chemical Anchor Studs, Chisel Tip. Installation Guide Check that the substrate you are fixing to is stable Use the chart to find the correct drill bit to use.
Chemical Anchor Resin Studs A2/ 304 Stainless Steel - Installation Guide Check that the substrate you are fixing to is stable Use the chart to find the correct drill bit to use. Use a suitable chemical resin Gently turn the stud as you depress it down wards (sit around 10mm from the bottom of the hole).
Zinc Chemical Anchor Resin Studs Plain Tip Grade 4.8 - Installation Guide Check that the substrate you are fixing to is stable Use the chart to find the correct drill bit to use. Use a suitable chemical resin Gently turn the stud as you depress it down wards (sit around 10mm from the bottom of the hole).
Chemical Anchor Resin Studs Plain End Chisel Tip Zinc Grade 5.8 - Use a suitable chemical resin Gently turn the stud as you depress it down wards (sit around 10mm from the bottom of the hole). Missing installation details will impair the performance of the stud, potentially making it unsafe.
100 Pack FABORY M12-1.75MM x 45mm Length Double-End Threaded Stud Size B - Location FC20-1 New without original package showing some signs of shelf wear such as slight surface rust mixed in. Please see pictures for example. 100PK FABORY M21520.120.0030 Double-End Threaded Stud, M12-1.75MM. Double-End Threaded Stud: Steel, Class 8, Black Oxide, 45 mm Lg, 15 mm Thread Lg A, 100 PK
M8 10 12 16 20 24 30 x Cut Length 8.8 Threaded Bar Stud Rod Galvanised - M8, M10, M12, M16, M20, M24, M30 x Various Lengths, Galvanised, High Tensile 8.8, Threaded Bar / Studding/ Rod. 1000mm Galvanised, High Tensile 8.8, Threaded Studding/ Bar/ Rod, DIN 976-1. M8 x 1mtr HT Allthread Galvanised Grade 8.8.
M20-2.50 X 39" All Thread Fully Threaded Rod A2 Stainless Steel SS - (1) New 39" length of A2 (304, 18/8) Stainless all thread. Total 1 piece, 1 stick. I am a one man operation. I will do my best to take care of YOU. At Your Service, Chitswood. I will send an updated invoice.
All Full Threaded Metric Bar Studding Rod Zinc Plated Nuts Washers M5 To M30 - Threaded Bar Studding Threaded BAR / ROD ZINC PLATED-Sizes from M5 upto M30. ZINC Plated Steel Fully Threaded Rod / Threaded Bar. You can also chooseFull Nuts, Wing Nuts, Nyloc Nuts or From A Washer and Vinyl Thread Cover Cap from above if you need any of them with the threaded Rod.
UNC 18" Threaded Bar Stud Rod Steel 4.8 - 36 X 3/16 UNC 24 tpi Mild Steel 4.8 Allthread Self Colour. 36 X 1/4 UNC 20 tpi Mild Steel 4.8 Allthread Self Colour. 36 X 5/16 UNC 18 tpi Mild Steel 4.8 Allthread Self Colour. 36 X 3/8 UNC 16 tpi Mild Steel 4.8 M.S. Allthread Self Colour.
Hex Threaded Bar Connector Long Nut A2 Stainless Steel - Hex Threaded Bar Connector Long Nut A2 Stainless Steel M6, M8, M10, M12, M16, M20, M24, Hex Allthread Connector Nut, A2/ 304 Stainless Steel. Hexagon Threaded Bar/ Rod Connector Nut Application A hexagon connector nut is used as a coupling 2 threaded bars together.
Hex Allthread Threaded Bar Rod Connector Nut BZP - Hex Allthread Threaded Bar Rod Connector Nut BZP M6, M8, M10, M12, M16, M20, M24, Zinc Plated/ BZP, Hexagon Threaded Bar/ Rod Connector Nut. Hexagon Threaded Bar/ Rod Connector Nut Application A hexagon connector nut is used as a coupling 2 threaded bars together.
UNF 18" Self Colour Threaded Bar Stud Rod Steel Mild Steel 4.8 - 36” X 1/4 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 5/16 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 3/8 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 1/2 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 5/8 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 3/4 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 7/8 UNF Mild Steel 4.8 Threaded Bar Self Colour Image is for illustrative purposes only.
UNF 18" Threaded Bar Stud Rod A2/ 304 Stainless Steel - 18"/ 1.5ft Lengths - UNF (Unified Fine Thread) Threaded Studding/ Bar/ Rod, A2/ 304 Stainless Steel, Din 976. Chemical Anchor. Direct Deposit. M3 Dowel Pins A1 Stainless Steel DIN 7. M5 Dowel Pins A1 Stainless Steel DIN 7.
UNC 18" Threaded Bar Stud Rod A2/ 304 Stainless Steel - Chemical Anchor. Direct Deposit. M3 Dowel Pins A1 Stainless Steel DIN 7. M5 Dowel Pins A1 Stainless Steel DIN 7. M6 Dowel Pins A1 Stainless Steel DIN 7. All-Thread Studding can be uséd in the following applications.
Metric Cut Lengths A4 316 Stainless Steel All Thread Bar Rod - M4, M5, M6, M8, M10, M12, M14, M16, M18, M20, M24, A4/ 316 Stainless Studding, Threaded Bar/ Studding, Full Bodied - 500mm, DIN 976-1. M2 X 100mm, 250mm, 500mm THREADED ROD DIN 976-1 A4 STAINLESS STEEL.
Metric 1m Solid Brass Threaded Bar Studding Rod DIN975 - SOLID BRASS All-Thread Studding can be uséd in the following applications M3 X 1 MTR Din 975 Brass Studding. M4 X 1 MTR Din 975 Brass Studding. M5 X 1 MTR Din 975 Brass Studding. M6 X 1 MTR Din 975 Brass Studding.
Metric Fine/ Extra Fine Pitch x 1m Self Colour 4.8 Threaded Bar Rod - M10 X 1.0P MS Allthread x 1m Lengths. M10 X 1.25P MS Allthread x 1m Lengths. M12 X 1.25P MS Allthread x 1m Lengths. M12 X 1.5P MS Allthread x 1m Lengths. M16 X 1.5P MS Allthread x 1m Lengths. M20 X 1.5P MS Allthread x 1m Lengths.
Metric x 500mm Solid Brass All Thread Bar Stud Rod DIN 975 - 500mm LengthsM3, M4, M5, M6, M8, M10, M12, Solid Brass, All Threaded Bar/ Rod, DIN 975. M3 X 500mm Din 975 Brass Studding. M4 X 500mm Din 975 Brass Studding. M5 X 500mm Din 975 Brass Studding. M6 X 500mm Din 975 Brass Studding.
UNF 12" 18" 24" Threaded Bar Stud Rod A2/ 304 Stainless Steel - Various Lengths - UNF (UNIFIED Fine Thread) Threaded Studding/ Bar/ Rod A2/ 304 Stainless Steel, Din 976. Chemical Anchor. Direct Deposit. M3 Dowel Pins A1 Stainless Steel DIN 7. M5 Dowel Pins A1 Stainless Steel DIN 7.
UNF 36" 1yd Threaded Bar Stud Rod A2/ 304 Stainless Steel - 36"/ 3ft/ 1yard Lengths - UNF (Unified Fine Thread) Threaded Studding/ Bar/ Rod, A2/ 304 Stainless Steel, Din 976. Chemical Anchor. Direct Deposit. M3 Dowel Pins A1 Stainless Steel DIN 7. M5 Dowel Pins A1 Stainless Steel DIN 7.
UNC 12" 18" 24" Threaded Bar Stud Rod A2/ 304 Stainless Steel - Chemical Anchor. Direct Deposit. M3 Dowel Pins A1 Stainless Steel DIN 7. M5 Dowel Pins A1 Stainless Steel DIN 7. M6 Dowel Pins A1 Stainless Steel DIN 7. All-Thread Studding can be uséd in the following applications.
UNF 36" 1yd Self Colour Threaded Bar Stud Rod Steel Mild Steel 4.8 - 36” X 1/4 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 5/16 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 3/8 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 1/2 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 5/8 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 3/4 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 7/8 UNF Mild Steel 4.8 Threaded Bar Self Colour Image is for illustrative purposes only.
UNF 12" 18" 24" Self Colour Threaded Bar Stud Rod Steel Mild Steel 4.8 - 36” X 1/4 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 5/16 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 3/8 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 1/2 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 5/8 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 3/4 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 7/8 UNF Mild Steel 4.8 Threaded Bar Self Colour Image is for illustrative purposes only.
UNC 36" 1yd Threaded Bar Stud Rod Steel 4.8 - 36"/ 3ft/ 1 yard Lengths - UNC (Unified Coarse Thread) Threaded Studding/ Bar/ Rod 4.8 Mild Steel, DIN 976. 36 X 3/16 UNC 24 tpi Mild Steel 4.8 Allthread Self Colour. 36 X 1/4 UNC 20 tpi Mild Steel 4.8 Allthread Self Colour.
Metric 1m A2 304 Stainless Steel Threaded Bar Stud Rod DIN976 - M3-M36 x 1m Lengths, A2/ 304 Stainless Steel, Threaded Bar/ Studding/ Rod/ Chemical Anchor. M3-M36 x 1m, A2/ 304 Stainless Steel, All Threaded Bar/ Studding/ Rod,Din 976. M3 A2 - 304 St/St Studding x 1m Lengths.
Metric x 500mm A2 304 Stainless Steel Threaded Bar Stud Rod DIN975 - M3-M36 x 500mm Lengths, A2/ 304 Stainless Steel, Threaded Bar/ Studding/ Rod/ Din 975. M3 A2 - 304 St/St Studding x 500mm Lengths. M4 A2 - 304 St/St Studding x 500mm Lengths. M5 A2 - 304 St/St Studding x 500mm Lengths.
Metric Cut Lengths A2 304 Stainless Steel Threaded Bar Stud Rod DIN976 - M3-M36 x Various Lengths, A2/ 304 Stainless Steel, All Threaded Bar/ Studding/ Rod, Din 976. M3 A2 - 304 St/St Studding x 100mm, 250mm, 500mm. M4 A2 - 304 St/St Studding x100mm, 250mm, 500mm. M5 A2 - 304 St/St Studding x100mm, 250mm, 500mm.
Metric x 500mm A4 316 Stainless Steel Threaded Bar Stud Rod DIN976 - M2 X 500mm THREADED ROD DIN 976-1 A4 STAINLESS STEEL. M2.5 X 500mm THREADED ROD DIN 976-1 A4 STAINLESS STEEL. M3 X 500mm THREADED ROD DIN 976-1 A4 STAINLESS STEEL. M4 X 500mm THREADED ROD DIN 976-1 A4 STAINLESS STEEL.
Metric x 500mm Galvanised Grade 8.8 All Thread Bar Studding Rod DIN976 - 50cm Lengths of M8, M10, M12, M16, M20, M24, M30, 50cm lengths, Galvanised, High Tensile 8.8, Threaded Studding/ Bar/ Rod, DIN 976-1. 1000mm Galvanised, High Tensile 8.8, Threaded Studding/ Bar/ Rod, DIN 976-1.
UNF 18" Self Colour Threaded Bar Stud Rod Steel Mild Steel 4.8 - 36” X 1/4 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 5/16 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 3/8 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 1/2 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 5/8 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 3/4 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 7/8 UNF Mild Steel 4.8 Threaded Bar Self Colour Image is for illustrative purposes only.
UNF 18" Threaded Bar Stud Rod A2/ 304 Stainless Steel - 18"/ 1.5ft Lengths - UNF (Unified Fine Thread) Threaded Studding/ Bar/ Rod, A2/ 304 Stainless Steel, Din 976. Chemical Anchor. UNF 5/8" Socket Cap Screw High Tensile 12.9 Self Colour DIN912. M10 Socket Screw Button Round A2 304 Stainless Steel DIN 9427.
UNC 18" Threaded Bar Stud Rod Steel 4.8 - 36 X 3/16 UNC 24 tpi Mild Steel 4.8 Allthread Self Colour. 36 X 1/4 UNC 20 tpi Mild Steel 4.8 Allthread Self Colour. 36 X 5/16 UNC 18 tpi Mild Steel 4.8 Allthread Self Colour. 36 X 3/8 UNC 16 tpi Mild Steel 4.8 M.S. Allthread Self Colour.
UNC 18" Threaded Bar Stud Rod A2/ 304 Stainless Steel - Chemical Anchor. M10 Socket Screw Button Round A2 304 Stainless Steel DIN 9427. Direct Deposit. M10 Socket Cap Allen Screw Bolt A2/304 Stainless Steel DIN 912. All-Thread Studding can be uséd in the following applications.
M3 M4 M5 M6 M8 M10 M12 x 1m Lengths Threaded Bar Stud Rod Solid Brass - M8 X 1 MTR Din 975 Brass Studding. M12 X 1 MTR Din 975 Brass Studding. M10 X 1 MTR Din 975 Brass Studding. M4 X 1 MTR Din 975 Brass Studding. M6 X 1 MTR Din 975 Brass Studding. M5 X 1 MTR Din 975 Brass Studding.
M3 M4 M5 M6 M8 M10 M12 x 500mm Threaded Bar Stud Rod Solid Brass - 500mm LengthsM3, M4, M5, M6, M8, M10, M12, Solid Brass, All Threaded Bar/ Rod, DIN 975. M8 X 500mm Din 975 Brass Studding. M4 X 500mm Din 975 Brass Studding. M12 X 500mm Din 975 Brass Studding. M10 X 500mm Din 975 Brass Studding.
Metric Fine Extra 10 12 16 20 24 x 1m 4.8 Threaded Bar Rod Stud Self Colour - M10 X 1.0P MS Allthread x 1m Lengths. M10 X 1.25P MS Allthread x 1m Lengths. M12 X 1.25P MS Allthread x 1m Lengths. M12 X 1.5P MS Allthread x 1m Lengths. M16 X 1.5P MS Allthread x 1m Lengths. M20 X 1.5P MS Allthread x 1m Lengths.
150 mm - threaded bolt DIN 976-1 - with nut and disc - stainless A2 or A4 - Gewindebolzen DIN 976-1 mit Scheibe DIN 125 und Mutter DIN 934 Material: Edelstahl A2 oder A4 Größe: M10 Länge: 150 mm Lieferumfang: 1 Gewindebolzen + 2 Scheiben + 2 Muttern andere Scheiben oder Muttern finden sie bei uns im Shop Anwendung: Industrie, Handwerk, Maschinenbau.
UNF 36" 1yd Self Colour Threaded Bar Stud Rod Steel Mild Steel 4.8 - 36” X 1/4 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 5/16 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 3/8 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 1/2 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 5/8 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 3/4 UNF Mild Steel 4.8 Threaded Bar Self Colour 36” X 7/8 UNF Mild Steel 4.8 Threaded Bar Self Colour Image is for illustrative purposes only.
UNF 12" 18" 24" Threaded Bar Stud Rod A2/ 304 Stainless Steel - Various Lengths - UNF (UNIFIED Fine Thread) Threaded Studding/ Bar/ Rod A2/ 304 Stainless Steel, Din 976. Chemical Anchor. UNF 5/8" Socket Cap Screw High Tensile 12.9 Self Colour DIN912. M10 Socket Screw Button Round A2 304 Stainless Steel DIN 9427.
UNF 36" 1yd Threaded Bar Stud Rod A2/ 304 Stainless Steel - 36"/ 3ft/ 1yard Lengths - UNF (Unified Fine Thread) Threaded Studding/ Bar/ Rod, A2/ 304 Stainless Steel, Din 976. Chemical Anchor. UNF 5/8" Socket Cap Screw High Tensile 12.9 Self Colour DIN912. M10 Socket Screw Button Round A2 304 Stainless Steel DIN 9427.
UNC 12" 18" 24" Threaded Bar Stud Rod A2/ 304 Stainless Steel - Chemical Anchor. M10 Socket Screw Button Round A2 304 Stainless Steel DIN 9427. Direct Deposit. M10 Socket Cap Allen Screw Bolt A2/304 Stainless Steel DIN 912. All-Thread Studding can be uséd in the following applications.
M8 10 12 16 20 24 30 x 1m Length 8.8 Threaded Bar Stud Rod Galvanised - Galvanised, High Tensile 8.8, Steel Material Properties Suitable for applications prone to chemical corrosion e.g. Salt Water. 1m Lengths, M8, M10, M12, M16, M20, M24, M30, 100cm lengths, Galvanised, High Tensile 8.8, Threaded Studding/ Bar/ Rod.
M4 5 6 8 10 12 14 16 18 20 22 24 30 x 1m Length 4.8 Threaded Bar Rod Self Colour - 1m/ 100cm Lengths Threaded Bar, Self Colour, Grade 4.8 Studding/ Bar/ Rod, Din 976. Chemical Anchor. UNF 5/8" Socket Cap Screw High Tensile 12.9 Self Colour DIN912. Direct Deposit. M10 Socket Cap Allen Screw Bolt A2/304 Stainless Steel DIN 912.
UNC 12" 18" 24" Threaded Bar Stud Rod Steel 4.8 - Various Lengths - UNC (Unified Coarse Thread) Threaded Studding/ Bar/ Rod 4.8 Mild Steel, Din 976. 36 X 3/16 UNC 24 tpi Mild Steel 4.8 Allthread Self Colour. 36 X 1/4 UNC 20 tpi Mild Steel 4.8 Allthread Self Colour.
UNC 36" 1yd Threaded Bar Stud Rod A2/ 304 Stainless Steel - 36"/ 3ft/ 1 yard Lengths - UNC (UNIFIED Coarse Thread) Threaded. Chemical Anchor. M10 Socket Screw Button Round A2 304 Stainless Steel DIN 9427. Direct Deposit. M10 Socket Cap Allen Screw Bolt A2/304 Stainless Steel DIN 912.
M3 M4 M5 M6 M8 M10 M12 x Various Lengths Threaded Bar Stud Rod Solid Brass - M3, M4, M5, M6, M8, M10, M12 x Various Lengths, Solid Brass, All Threaded Bar/ Rod, Din 976. M10 Socket Screw Button Round A2 304 Stainless Steel DIN 9427. M10 Socket Cap Allen Screw Bolt A2/304 Stainless Steel DIN 912.
M3 4 5 6 8 10 12 14 16 18 20 22 24 30 33 x 1m Threaded Bar Stud Rod A4 Stainless - A4/ 306 Stainless Steel Material Properties Suitable for applications prone to chemical corrosion e.g. Salt Water. 1m Lengths, M2, M2.5, M3, M4, M5, M6, M8, M10, M12, M14, M16, M17, M20, M22, M24, M27, M30, M32, M36 A4/ 316 Stainless Studding, Threaded Bar/ Studding, Full Bodied, DIN 976-1.
M6 8 10 12 16 18 20 24 30 x 1m High Tensile 8.8 Threaded Bar Stud Rod Zinc BZP - Applications of Threaded Bar, Zinc, High Tensile (8.8) Studding/ Bar/ Rod. M6 X 1Mtr Ht Allthread Gr8.8 Zp. High Tensile, Grade 8.8, Studding/ Bar/ Rod/ DIN 976. Threaded Bar, Zinc. Chemical Anchor. BSW Whitworth 3/16" Socket Cap Screw High Tensile 12.9 DIN 912.
M6 M8 M10 M12 M20 Threaded Rod Studding Bar Stud BZP KAF - M6 M8 M10 M12 to M20 Threaded / Studding Bar DIN 976 BZP. They are designed for a nut to be applied on both ends and are often used for electrical, construction and plumbing for hanging purposes. What is DIN 976?.
190 Screw In Studs L47964, 10189 - 190 Screw In Studs L47964, 10189. Bag Was Ripped Open From Shipping and Some Studs are Missing. There are Approximately 190 Studs in Bag. New Unused Condition.Sellers NotesItem Location R1B Bin 2AS
Commercial Threaded Rod 24-in x 5/8-in Silver Zinc - Item Number: 882-020316. Country of Manufacture: Unknown. We are located in Bellingham, Washington. ITEM PERFORMANCE AND CONDITION DETAILS: 1 (low) to 10 (high). Item Actual Operation: 10. If an item cannot be tested or is partially tested the details will be listed with the Item Actual Operation details.
Commercial Threaded Rod 13-in x 5/8-in Silver Zinc - Item Number: 884-020316. Country of Manufacture: Unknown. We are located in Bellingham, Washington. ITEM PERFORMANCE AND CONDITION DETAILS: 1 (low) to 10 (high). Item Actual Operation: 10. Total Length/Girth: 24.
Commercial Threaded Pendant Light Rods 16-in Lot of 3 White/Silver - Item Number: 892-020316. Country of Manufacture: Unknown. Pick up at our location after purchasing on this site. Item Condition: Used Good. If an item cannot be tested or is partially tested the details will be listed with the Item Actual Operation details.
1 3/4"-8 X 27" Grade B7 Fully Threaded Stud - 1 3/4"-8 X 27" FULLY THREADED STUDS. COURSE THREAD. OVERALL LENGTH: 27". 27" X 1 3/4"" X 1 3/4". APPROXIMATE WEIGHT: 19 LBS. WEIGHT: 13 LBS. DIA/THREAD SIZE: 1 3/4"-8. YOU WILL RECEIVE WHAT IS PICTURED, NOTHING LESS NOTHING MORE.
NEW Griptite M12 500mm 20" Fully Threaded Rod - Bright Zinc Plated - 500mm M12 threaded Rod. BZP (Bright Zinc Plated) for durability. Length: 500mm. All manufacturer warranties, obligations and liabilities are void. I've placed an order by mistake, can I cancel?. Item Specs.
Stud, 1-3/8" -8 X 10", B7 Grade, Lot Of 2 - THREAD SIZE: -8. SF/23557/SK 439/(17)E. 1-3/8" -8 X 10". LENGTH: 10". YOU WILL RECEIVE WHAT IS PICTURED, NOTHING LESS NOTHING MORE.
1 3/8" x 12 1/2" Fully Threaded Stud with 2 Hex Nuts - Threaded Rod Finish : Black Oxide. Threaded Rod Material Grade : Grade B7. Threaded Rod Thread Type : 8UN. Threaded Rod Material : Steel. Item : Fully Threaded Rod. Range : -58 Degrees to 752 Degrees F.
1-1/4 x 7-1/2 in. Fully Threaded B7 Stud with 2 Hex Nuts - ASTM Specifications: ASTM A-193, ASTM A-194, ASTM A193 Grade B7. Grade: B7;2H. Drive Type: Hex. Product Type: Stud Bolt. Fitting Size 1: 1-1/4 in. Fitting Size 2: 1-1/4 in. Fitting Sizes: 1-1/4 in. Length: 7-1/2 in.
Tige Filetee A/I 6-32 Stainless Steel Threaded Rod - MATERIAL : STAINLESS STEEL. THREAD : 32. The item you receive may be different from the actual item in the photo in the case of multiple quantity lots.
.500" 1/2" Rod End Heim Joint Right and Left (2 joints) - 1/2". 500" Rod End Heim Joint. Includes 1-left hand thread and 1-Right Hand thread Heim set. Spacer Jam nut included. These XMR heim joints are the best you can buy. The 1/2” bore is the strongest way to make this heim.
ETA Approved Chemical Anchor Resin Studs A2/ 304 Stainless JCP - ETA Approved Chemical Anchor Resin Studs A2/ 304 Stainless JCP C. E., ETA Approved M8, M10, M12, M16, M20, M24 J.C.P, A2/ 304 Stainless Steel, Chemical Anchor Studs, Chisel Tip. Installation Guide Check that the substrate you are fixing to is stable Use the chart to find the correct drill bit to use.
ETA Approved Chemical Anchor Resin Studs A4 Stainless Steel JCP - ETA Approved Chemical Anchor Resin Studs A4 Stainless Steel JCP C. E., ETA Approved M8, M10, M12, M16, M20, M24 J.C.P, A4/ 316 Stainless Steel, Chemical Anchor Studs, Chisel Tip. Installation Guide Check that the substrate you are fixing to is stable Use the chart to find the correct drill bit to use.
ETA Approved Chemical Anchor Resin Studs Galvanised Steel JCP - ETA Approved Chemical Anchor Resin Studs Galvanised Steel JCP C. E., ETA Approved M8, M10, M12, M16, M20, M24 J.C.P, 5.8 Grade Galvanised Steel, Chemical Anchor Studs, Chisel Tip. Installation Guide Check that the substrate you are fixing to is stable Use the chart to find the correct drill bit to use.
Chemical Anchor Resin Studs Plain End Chisel Tip Zinc Grade 5.8 - Use a suitable chemical resin Gently turn the stud as you depress it down wards (sit around 10mm from the bottom of the hole). Missing installation details will impair the performance of the stud, potentially making it unsafe.
Zinc Chemical Anchor Resin Studs Plain Tip Grade 4.8 - Installation Guide Check that the substrate you are fixing to is stable Use the chart to find the correct drill bit to use. Use a suitable chemical resin Gently turn the stud as you depress it down wards (sit around 10mm from the bottom of the hole).
Metric 1m A4 316 Stainless Steel Threaded Bar Stud Rod DIN976 - A4/ 306 Stainless Steel Material Properties Suitable for applications prone to chemical corrosion e.g. Salt Water. 1m Lengths, M2, M2.5, M3, M4, M5, M6, M8, M10, M12, M14, M16, M17, M20, M22, M24, M27, M30, M32, M36 A4/ 316 Stainless Studding, Threaded Bar/ Studding, Full Bodied, DIN 976-1.
Metric 1m Galvanised Grade 8.8 Threaded Bar Stud Rod DIN976 - Galvanised, High Tensile 8.8, Steel Material Properties Suitable for applications prone to chemical corrosion e.g. Salt Water. 1m Lengths, M8, M10, M12, M16, M20, M24, M30, 100cm lengths, Galvanised, High Tensile 8.8, Threaded Studding/ Bar/ Rod.
Metric Self Colour 4.8 Threaded Bar Stud Rod 1m - 1m/ 100cm Lengths Threaded Bar, Self Colour, Grade 4.8 Studding/ Bar/ Rod, Din 976. Chemical Anchor. Direct Deposit. All-Thread Studding can be uséd in the following applications Can be uséd in repairs and to secure parts together.
UNC 12" 18" 24" Threaded Bar Stud Rod Steel 4.8 - Various Lengths - UNC (Unified Coarse Thread) Threaded Studding/ Bar/ Rod 4.8 Mild Steel, Din 976. 36 X 3/16 UNC 24 tpi Mild Steel 4.8 Allthread Self Colour. 36 X 1/4 UNC 20 tpi Mild Steel 4.8 Allthread Self Colour.
Metric Various Lengths Solid Brass All Thread Bar Rod Din 976 - M3, M4, M5, M6, M8, M10, M12 x Various Lengths, Solid Brass, All Threaded Bar/ Rod, Din 976. M3x 100mm, 250mm, 500mm Din 975 Brass Studding. M4x 100mm, 250mm, 500mm Din 975 Brass Studding. M5x 100mm, 250mm, 500mm Din 975 Brass Studding.
Metric Zinc BZP HT 8.8 All Threaded Bar Stud Rod 1m - Applications of Threaded Bar, Zinc, High Tensile (8.8) Studding/ Bar/ Rod. M6 X 1Mtr Ht Allthread Gr8.8 Zp. M8 X 1Mtr Ht Allthread Gr8.8 Zp. M10 X 1Mtr Ht Allthread Gr8.8 Zp. M12 X 1Mtr Ht Allthread Gr8.8 Zp.
Metric Zinc BZP Mild Steel 4.8 All Threaded Bar Stud Rod 1m - 100cm Lengths M5, M6, M8, M10, M12, M16, M18, M20, M22, M24, M30, Zinc, 4.8 Grade Steel, All Thread Studding/ Bar/ Rod/ DIN 976. Chemical Anchor. Direct Deposit. All-Thread Studding can be uséd in the following applications.
5pcs M10 Threaded Pins/Pin Screws with Tip DIN914 - ISO 4027 V2A - 5 Stück M10 Gewindestifte mit Innensechskant und Spitze DIN 914 - ISO 4027 5 x M10 Hexagon socket set screws with cone point DIN 914 - ISO 4027 Material: Edelstahl A2 Größe: M10 - verschiedene Längen M2 bis M10 bei uns im Shop erhältlich Anwendung: Industrie, Handwerk, Maschinenbau, Modellbau .
5pcs M8 Threaded Pins/Pin Screws with Tip DIN914 - ISO 4027 V2A - 5 Stück M8 Gewindestifte mit Innensechskant und Spitze DIN 914 - ISO 4027 5 x M8 Hexagon socket set screws with cone point DIN 914 - ISO 4027 Material: Edelstahl A2 Größe: M8 - verschiedene Längen M2 bis M10 bei uns im Shop erhältlich Anwendung: Industrie, Handwerk, Maschinenbau, Modellbau .
5pcs - M2 - threaded pins / pin screws with cone top DIN913 A2 ISO 4026 - 5 Stück M2 Gewindestifte mit Innensechskant und Kegelkuppe DIN 913 - ISO 4026 5x M2 Hexagon socket set screws with flat point DIN 913 - ISO 4026 Material: Edelstahl A2 Größe: M2 M2 bis M12 bei uns im Shop erhältlich Anwendung: Industrie, Handwerk, Maschinenbau, Modellbau .
5pcs - M6 - Threaded Pins/Pin Screws with Cone Top DIN913 A2 ISO 4026 - 5 Stück M6 Gewindestifte mit Innensechskant und Kegelkuppe DIN 913 - ISO 4026 5x M6 Hexagon socket set screws with flat point DIN 913 - ISO 4026 Material: Edelstahl A2 Größe: M6 M2 bis M12 bei uns im Shop erhältlich Anwendung: Industrie, Handwerk, Maschinenbau, Modellbau .
5pcs - M3 - Threaded Pins/Pin Screws with Cone Top DIN913 A2 ISO 4026 - 5 Stück M3 Gewindestifte mit Innensechskant und Kegelkuppe DIN 913 - ISO 4026 5x M3 Hexagon socket set screws with flat point DIN 913 - ISO 4026 Material: Edelstahl A2 Größe: M3 M2 bis M12 bei uns im Shop erhältlich Anwendung: Industrie, Handwerk, Maschinenbau, Modellbau .
5pcs - M12 - Threaded Pins/Pin Screws with Cone Top DIN913 A2 ISO 4026 - 5 Stück M12 Gewindestifte mit Innensechskant und Kegelkuppe DIN 913 - ISO 4026 5x M12 Hexagon socket set screws with flat point DIN 913 - ISO 4026 Material: Edelstahl A2 Größe: M10 M2 bis M12 bei uns im Shop erhältlich Anwendung: Industrie, Handwerk, Maschinenbau, Modellbau .
5pcs - M5 - Threaded Pins/Pin Screws with Cone Top DIN913 A2 ISO 4026 - 5 Stück M5 Gewindestifte mit Innensechskant und Kegelkuppe DIN 913 - ISO 4026 5x M5 Hexagon socket set screws with flat point DIN 913 - ISO 4026 Material: Edelstahl A2 Größe: M5 M2 bis M12 bei uns im Shop erhältlich Anwendung: Industrie, Handwerk, Maschinenbau, Modellbau .
5pcs - M10 - Threaded Pins/Pin Screws with Cone Top DIN913 A2 ISO 4026 - 5 Stück M10 Gewindestifte mit Innensechskant und Kegelkuppe DIN 913 - ISO 4026 5x M10 Hexagon socket set screws with flat point DIN 913 - ISO 4026 Material: Edelstahl A2 Größe: M10 M2 bis M12 bei uns im Shop erhältlich Anwendung: Industrie, Handwerk, Maschinenbau, Modellbau .
5pcs - M4 - threaded pins / pin screws with cone top DIN913 A2 ISO 4026 - 5 Stück M4 Gewindestifte mit Innensechskant und Kegelkuppe DIN 913 - ISO 4026 5x M4 Hexagon socket set screws with flat point DIN 913 - ISO 4026 Material: Edelstahl A2 Größe: M4 M2 bis M12 bei uns im Shop erhältlich Anwendung: Industrie, Handwerk, Maschinenbau, Modellbau .
5pcs - M8 - Threaded Pins/Pin Screws with Cone Top DIN913 A2 ISO 4026 - 5 Stück M8 Gewindestifte mit Innensechskant und Kegelkuppe DIN 913 - ISO 4026 5x M8 Hexagon socket set screws with flat point DIN 913 - ISO 4026 Material: Edelstahl A2 Größe: M8 M2 bis M12 bei uns im Shop erhältlich Anwendung: Industrie, Handwerk, Maschinenbau, Modellbau .
Vintage Ramset Shure- Set Fasteners 9 Threaded Studs # Cs210 - Vintage Ramset Shure- Set Fasteners 9 Threaded Studs # Cs210. Please see pictures for more detailPictures are part of the description, please ask any questions before buyingIf Return is accepted within 14 days of purchase, item returned needs to be in the same condition as received. Buyer must pay return shipping, we will ONLY refund purchase price excluding shipping cost.We ONLY ship to lower 48 lower states not included PR: HI ; we don not ship to POBox .Shipping Quotes is to Lower 48 States ONLYWe do not ship to PO Box address
7/8"-9 x 4-1/2" ASTM A320 Blue Teflon Coated Studs w/Nuts #6363 - Our Ref: Shelf Area C, 175W, 06-20 Location #6363. Grade: ASTM A320 L7. ASTM A320, GRADE L7. ASTM A193 B7 vs A320 L7 Stud Bolts. It is a heat treated Chromium Molybdenum steel and is considered for applications up to 450° Celsius (840° Fahrenheit).
Fastenal Plain Heavy Hex Nut, 2-1/4", 8 Thread Pitch, Grade 2H, 36590 - YOU WILL RECEIVE WHAT IS PICTURED, NOTHING LESS NOTHING MORE. APPROXIMATE WEIGHT: 5 LBS. APPROXIMATE WEIGHT: 5.2 LBS. AE/481/SC4 F-2/(1)SMN. PART NO. 36590. LBP/#119/SC7 I-3/(1)TR PFR. PLAIN FINISH HEAVY HEX NUT.
5/8"-11 x 3" Fully Threaded Monel NiCu Nickel Copper Rod Bar Stud - Monel threaded rods are made from a nickel-copper alloy and exhibit high strength, toughness and good corrosion resistance over a wide temperature range. For hydrofluoric acid applications. Monel Threaded Rods.
7/8"-9 x 5-1/4" Fully Threaded Monel NiCu Nickel Copper Stud Rod Bolt - Monel threaded rods are made from a nickel-copper alloy and exhibit high strength, toughness and good corrosion resistance over a wide temperature range. For hydrofluoric acid applications. Monel Threaded Rods.
5/8"-11 x 5-1/4" Fully Threaded S Monel NiCu Nickel Copper Rod Bar Stud - Monel threaded rods are made from a nickel-copper alloy and exhibit high strength, toughness and good corrosion resistance over a wide temperature range. For hydrofluoric acid applications. S MONEL is an age-hardenable casting alloy that provides unusual strength, hardness and anti-galling properties at temperatures up to 1100 F. in addition to the general corrosion resistance of Monel.
5/8"-11 x 3-1/2" Fully Threaded Monel NiCu Nickel Copper Rod Bar Stud - Monel threaded rods are made from a nickel-copper alloy and exhibit high strength, toughness and good corrosion resistance over a wide temperature range. For hydrofluoric acid applications. Monel Threaded Rods.
1/2"-13 x 2-1/2" Fully Threaded S Monel NiCu Nickel Copper Stud Bolt Rod - Monel threaded rods are made from a nickel-copper alloy and exhibit high strength, toughness and good corrosion resistance over a wide temperature range. For hydrofluoric acid applications. S MONEL is an age-hardenable casting alloy that provides unusual strength, hardness and anti-galling properties at temperatures up to 1100 F. in addition to the general corrosion resistance of Monel.
1M Fully Threaded Stainless Steel SS Rod Studding Metric M6,M8,M10,M12 FREEPOST - New Unused Threaded Rod. Yes, as long as the order hasn't been 'dispatched'. All manufacturers warranties, obligations and liabilities are now void. Cash Only on Collection. However if you miss this cut off then 1 of 2 things will happen.
Industry Edelstahl-Stab M5 short Threads Ø 10mm SW8 System-Halte-Stange L~325mm - Fast shipping competent service 1 month cancellation VAT bill eBay shop Remember shop reviews Newsletter ElectromyneShop CPUs / processors RAMs / memory Drives / drives Power supplies Motherboards Graphics cards Sound cards Other cards Fans / fans Accessories Server parts Laptop parts Electronic components Advantages Fast shipping 12/24 months warranty Professional checkout Pickup possible Quick shipping Pickup possible XXL zoom Dimensions: Dimensions: Status • second hand Condition • used packaging Package • safe packaging scope of delivery Items delivered General information Shipping Payment After your buy payment shipping Shop Electromyne shop .
A2 304 stainless steel studding 1m metre metric allthread bar threaded rod 1 m - Stainless steel A2 304 grade studding 1 metre lengths Product information Fully threaded lengths of metric coarse studding in 1 metre lengths available in M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5, M12 x 1.75, M14 x 2.0, M16 x 2.0, M18 x 2.5, M20 x 2.5, M22 x 2.5 & M24 x 3.0.
TRA 1210 1/2" - 13 x 10" Threaded Steel Support Rod, 4 Pack - TRA 1210 1/2" - 13 x 10" Threaded Steel Support Rod. Threaded rod is an excellent multi-purpose all-thread that can be used for hanging fixtures, sprinklers, lights and much more. The plain finish is designed for indoor use only where there aren't any chemicals or solvents present.
Fully Threaded UNF Stud 300mm Long Steel Plated Stud Rod Bar Thread - Available size : UNF THREAD. 1/4-20 UNF Thread (12" Long ) Auto. 5/16-24 UNF Thread (12" LONG) Auto. 3/8-24 UNF Thread (12" LONG) YELLOW. 7/16-20 UNF Thread (12" LONG) AUTO. 1/2-20 UNF Thread (12" LONG) YELLOW.
M8 M10 M12 M16 M20 Hot Galvanised Chemical Resin Anchor Studs Threaded Rod / Bar - Hot Dip Galvanised Resin Studs. Hot Dip Galvanised. Chemical anchor studs Grade 5.8 with a external hex drive and chisel point which prevents the rod turning when tightening. Bolt World. Depth mark, chisel point and hex drive system as standard.
M3 Aluminum Alloy Column Threaded Sleeve Rod Stud Round Connector Standoff Nut - Model:Column Threaded Sleeve Rod Stud Round Connector Standoff Nut. Colour:Aluminum colour. Material:Aluminum Alloy Red Black Golden Blue Silver Purple. Note: due to the differences in shooting scenes and technology, there will be a chromatic aberration between the photos and actual colors.
Industry Metal Schraub-Stifte Convolute M4-M8 Fixier-Verschraubung Pin Stopper - Fast shipping competent service 1 month cancellation VAT bill eBay shop Remember shop reviews Newsletter ElectromyneShop CPUs / processors RAMs / memory Drives / drives Power supplies Motherboards Graphics cards Sound cards Other cards Fans / fans Accessories Server parts Laptop parts Electronic components Advantages Fast shipping 12/24 months warranty Professional checkout Pickup possible Quick shipping Pickup possible XXL zoom Note: 42 pieces Note: 42-pieces Status • second hand Condition • used packaging Package • safe packaging scope of delivery Items delivered General information Shipping Payment After your buy payment shipping Shop Electromyne.
1/4-20x8” Fully Threded Zinc Plated Studs 10pc - 1/4-20x8” Fully Threded Zinc Plated Studs 10pc. Condition is "New". Free shipping • Included in this sale are the exact items as pictured, please see all photos for the best description and everything included with this sale.• We will be shipping your item within 3 business days of receiving payment. We usually pack and ship on Sunday and Thursday. • Please do not hesitate to ask any questions you may have, we are always happy to help.• We always strive for the best service! If you have any issues with your order please contact us prior to leaving feedback
5/8"-11 x 7" Coarse Thread A193 Grade B7 Stud (End to End) Plain Finish - Thread Pitch Type: Coarse. Thread Pitch: 11. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Fastener Type: Stud (End to End). Studs are a relatively long rod that is threaded on both ends; the thread may extend along the complete length of the rod and are designed to be used in tension.
5/8"-11 x 3" Coarse Thread A193 Grade B7 Stud (End to End) Plain Finish - Thread Pitch Type: Coarse. Thread Pitch: 11. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Fastener Type: Stud (End to End). Studs are a relatively long rod that is threaded on both ends; the thread may extend along the complete length of the rod and are designed to be used in tension.
1/2"-13 x 2 1/4" Coarse A193 Grade B7 Stud (End to End) Plain Finish - Thread Pitch Type: Coarse. Fastener Type: Stud (End to End). Thread Pitch: 13. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Finish: Plain Finish (No Plating). Studs are a relatively long rod that is threaded on both ends; the thread may extend along the complete length of the rod and are designed to be used in tension.
1"-8 x 6' Coarse Thread ASTM F593 All Thread Rod Stainless Steel 316 - Thread Pitch Type: Coarse. All thread rod is available in low carbon steel (plain, zinc plated or hot dip galvanized) as well as 304 and 316 stainless, and B7 alloy steel. Other materials are available on special order.
1 1/4"-7 x 3' Coarse Thread A193 Grade B7 All Thread Rod Plain Finish - All thread rod is available in low carbon steel (plain, zinc plated or hot dip galvanized) as well as 304 and 316 stainless, and B7 alloy steel. Other materials are available on special order. Thread Pitch Type: Coarse.
1 1/4"-7 x 3' UNC Coarse Thread A307 Grade A All Thread Rod Zinc Plated - Thread Pitch Type: Coarse. All thread rod is available in low carbon steel (plain, zinc plated or hot dip galvanized) as well as 304 and 316 stainless, and B7 alloy steel. Other materials are available on special order.
3/4"-10 x 6' Coarse Thread ASTM F593 All Thread Rod Stainless Steel 316 - Thread Pitch Type: Coarse. All thread rod is available in low carbon steel (plain, zinc plated or hot dip galvanized) as well as 304 and 316 stainless, and B7 alloy steel. Other materials are available on special order.
3/4"-10 x 6' Coarse Thread A193 Grade B7 All Thread Rod Plain Finish - All thread rod is available in low carbon steel (plain, zinc plated or hot dip galvanized) as well as 304 and 316 stainless, and B7 alloy steel. Other materials are available on special order. Thread Pitch Type: Coarse.
M20 x 2.50 x 1 M Coarse Thread All Thread Rod Low Carbon Steel Zinc Plated - Thread Pitch Type: Coarse. All thread rod is available in low carbon steel (plain, zinc plated or hot dip galvanized) as well as 304 and 316 stainless, and B7 alloy steel. Other materials are available on special order.
1/2"-13 x 6' Coarse Thread ASTM F593 All Thread Rod Stainless Steel 316 - Thread Pitch Type: Coarse. All thread rod is available in low carbon steel (plain, zinc plated or hot dip galvanized) as well as 304 and 316 stainless, and B7 alloy steel. Other materials are available on special order.
1/2"-13 x 3' UNC Coarse Thread A307 Grade A All Thread Rod Zinc Plated - Thread Pitch Type: Coarse. All thread rod is available in low carbon steel (plain, zinc plated or hot dip galvanized) as well as 304 and 316 stainless, and B7 alloy steel. Other materials are available on special order.
1"-8 x 8 3/4" 8UN Thread A193 Grade B7 Stud (End to End) Plain Finish - Thread Pitch Type: 8UN. Thread Pitch: 8. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Fastener Type: Stud (End to End). Studs are a relatively long rod that is threaded on both ends; the thread may extend along the complete length of the rod and are designed to be used in tension.
M12 x 1.75 x 1 M Coarse Thread All Thread Rod Low Carbon Steel Zinc Plated - Thread Pitch Type: Coarse. All thread rod is available in low carbon steel (plain, zinc plated or hot dip galvanized) as well as 304 and 316 stainless, and B7 alloy steel. Other materials are available on special order.
1"-8 x 8 1/2" 8UN Thread A193 Grade B7 Stud (End to End) Plain Finish - Thread Pitch Type: 8UN. Thread Pitch: 8. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Fastener Type: Stud (End to End). Studs are a relatively long rod that is threaded on both ends; the thread may extend along the complete length of the rod and are designed to be used in tension.
3/4"-10 x 12 1/4" Coarse A193 Grade B7 Stud (End to End) Plain Finish - Thread Pitch Type: Coarse. Fastener Type: Stud (End to End). Thread Pitch: 10. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Finish: Plain Finish (No Plating). Studs are a relatively long rod that is threaded on both ends; the thread may extend along the complete length of the rod and are designed to be used in tension.
3/4"-10 x 4" Coarse Thread A193 Grade B7 Stud (End to End) Plain Finish - Thread Pitch Type: Coarse. Thread Pitch: 10. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Fastener Type: Stud (End to End). Studs are a relatively long rod that is threaded on both ends; the thread may extend along the complete length of the rod and are designed to be used in tension.
M5 x 0.80 x 1 M Coarse Thread All Thread Rod Stainless Steel 18-8 - Thread Pitch Type: Coarse. All thread rod is available in low carbon steel (plain, zinc plated or hot dip galvanized) as well as 304 and 316 stainless, and B7 alloy steel. Other materials are available on special order.
5/8"-11 x 6" Coarse Thread A193 Grade B7 Stud (End to End) Plain Finish - Thread Pitch Type: Coarse. Thread Pitch: 11. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Fastener Type: Stud (End to End). Studs are a relatively long rod that is threaded on both ends; the thread may extend along the complete length of the rod and are designed to be used in tension.
7/8"-9 x 10" Coarse Thread A193 Grade B7 Stud (End to End) Plain Finish - Thread Pitch Type: Coarse. Thread Pitch: 9. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Fastener Type: Stud (End to End). Studs are a relatively long rod that is threaded on both ends; the thread may extend along the complete length of the rod and are designed to be used in tension.
5/8"-11 x 3' UNC Coarse Thread A307 Grade A All Thread Rod Zinc Plated - Thread Pitch Type: Coarse. All thread rod is available in low carbon steel (plain, zinc plated or hot dip galvanized) as well as 304 and 316 stainless, and B7 alloy steel. Other materials are available on special order.
5/8"-11 x 3' Coarse Thread ASTM F593 All Thread Rod Stainless Steel 316 - Thread Pitch Type: Coarse. All thread rod is available in low carbon steel (plain, zinc plated or hot dip galvanized) as well as 304 and 316 stainless, and B7 alloy steel. Other materials are available on special order.
5/8"-11 x 3 1/2" Coarse A193 Grade B7 Stud (End to End) Plain Finish - Thread Pitch Type: Coarse. Fastener Type: Stud (End to End). Thread Pitch: 11. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Finish: Plain Finish (No Plating). Studs are a relatively long rod that is threaded on both ends; the thread may extend along the complete length of the rod and are designed to be used in tension.
1"-8 x 6' UNC Coarse Thread A307 Grade A All Thread Rod Plain Finish - Thread Pitch Type: Coarse. All thread rod is available in low carbon steel (plain, zinc plated or hot dip galvanized) as well as 304 and 316 stainless, and B7 alloy steel. Other materials are available on special order.
Stainless Pelican Hook With Slide 5.75", 316 Ss - The Pelican Hook with Slide is available in a 4" or 5-3/4" size. This hook is made from grade 316 stainless steel for maximum corrosion resistance and durability, making it ideal for marine and industrial applications.
Stainless Pelican Hook With Slid 4", 316 Ss - The Pelican Hook with Slide is available in a 4" or 5-3/4" size. This hook is made from grade 316 stainless steel for maximum corrosion resistance and durability, making it ideal for marine and industrial applications.
Stainless Pelican Hook W/ Stud, 1/4" X 1/8" Wire, 316 Ss - The Pelican Hook and Swage Stud fits wire rope sizes from 1/8" to 1/4". It features a pelican hook, swage stud and UNF threads. This pelican hook is made from grade 316 stainless steel for maximum corrosion resistance and durability, making it ideal for a lifeline application where a gate is desired.
Shock Absorber Rod End Top Hat Step Reducer Rose Joint Spacer Rally Car - Can be used as a spacer as well as a reducer. Allows free rotation of the ball as the lip slides inside the joint housing. Ideal for applications where the bore size on the rod end needs to be reduced to take a smaller bolt.
Zinc Plated Steel Threaded Rod Bar M10 x 300mm Includes Lock Nuts & Washers - Thread is M10 x 300mm with lock nuts and washers. Buggy, Gokart, Prokart. Zinc plated to protect from rusting. Double nuts set for firm positioning. Strong steel rod for use in multiple applications. This varies depending on your location, and the options are displayed at the top of each ad.
Forgefix Threaded Rod Stainless Steel M12 X 1M Single FORROD12SS - These Forgefix Threaded Rods are made of A2 stainless steel, which will not corrode, rust or stain from water. This makes them ideally suited for corrosive and coastal applications as well as many other varied applications. They can be used with many other products including Drop in Anchors and Masonry Anchor Shields, and provide a cost effective fastening for many applications. Conform to DIN 975 standards. APPLICATION:Used widely in the soft furnishing trades where strong timber connection is required. Also extensively used in Playground and Climbing Wall manufacturing.
Forgefix Threaded Rod Stainless Steel M8 X 1M Single FORROD8SS - These Forgefix Threaded Rods are made of A2 stainless steel, which will not corrode, rust or stain from water. This makes them ideally suited for corrosive and coastal applications as well as many other varied applications. They can be used with many other products including Drop in Anchors and Masonry Anchor Shields, and provide a cost effective fastening for many applications. Conform to DIN 975 standards. APPLICATION:Used widely in the soft furnishing trades where strong timber connection is required. Also extensively used in Playground and Climbing Wall manufacturing.
Forgefix Threaded Rod Stainless Steel M10 X 1M Single FORROD10SS - These Forgefix Threaded Rods are made of A2 stainless steel, which will not corrode, rust or stain from water. This makes them ideally suited for corrosive and coastal applications as well as many other varied applications. They can be used with many other products including Drop in Anchors and Masonry Anchor Shields, and provide a cost effective fastening for many applications. Conform to DIN 975 standards. APPLICATION:Used widely in the soft furnishing trades where strong timber connection is required. Also extensively used in Playground and Climbing Wall manufacturing.
5 Piece M6 Grub Screws/Grub Screws with Lace DIN914 - ISO 4027 V2A - 5 M6 set screws with hexagon socket and tip din 914 - ISO 4027 5 x M6 hexagon socket set screws with cone point din 914 - ISO 4027 Material: A2 stainless steel Size: M6 - different lengths from M2 to M10 available in our shop Application: Industry, Crafts, mechanical engineering, model making.
5 Piece M4 Grub Screws/Grub Screws with Lace DIN914 - ISO 4027 V2A - 5 pieces M4 set screws with hexagon socket and point din 914 - ISO 4027 5 x M4 hexagon socket set screws with cone point din 914 - ISO 4027 Material: Stainless steel A2 Size: M4 - different lengths M2 to M10 available in our shop Application: Industry, Craft, mechanical engineering, model making.
Grub Screws/Grub Screws with Lace DIN914 - M6 To M10 - Stainless Steel A2 Inox - Hexagon socket set screws with tip din 914 - ISO 4027 Hexagon socket set screws with cone point din 914 - ISO 4027 Material: A2 stainless steel Size: M6 to M10 M2 to M5 available in our shop Application: Industry, trade, mechanical engineering, model making.
M3 - M16 Studs GB901 Screw Rod Threaded On Both Ends Bolts A2 A4 Stainless Steel - M3, M4, M5, M6, M8, M10, M12, M16. ● Thread Size: M3, M4, M5, M6, M8, M10, M12, M16. ● Equal Threaded On Both Ends. ● Material: A2Stainless Steel (SUS304) / A4 StainlessSteel (SUS316). ● Studs Total Length: 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, 45 mm, 50 mm, 60 mm, 55 mm, 65 mm, 70 mm, 80 mm, 90 mm, 100 mm, 120 mm, 130 mm, 140 mm, 150 mm, 200 mm, 250 mm.
15mm Rod Caps, Threaded (x 5) - 15mm Rod Caps, Threaded (x 5). Unused. For some reason I have 5 so have them all for the price of 4...! Dispatched with Royal Mail 2nd Class.
Grub Screws/Grub Screws With Small Qty's From DIN 916 / Iso 4029 M6 To M10 V2A - You are buying here Grub screws with cup point din 916 / ISO 4029 with hexagon socket in sizes M6, M8, M10 You can find sizes from M2 to M5 in our shop Length 5 to 50 mm Material stainless steel V2A Please select size and diameter above You can find different sizes and quantities in our shop All prices quoted include 19% VAT. and packaging, but plus stated costs for shipping When purchasing, you will receive an invoice with VAT shown. Larger quantities available on request. If you are satisfied with the articles and the handling, we would be happy to receive a 4x5 ***** rating. Should we have made a mistake, an email or phone call is sufficient and we will solve the problem. Look out for our other auctions! With us you will find many other screws and accessories.
Grub Screws/Grub Screws with Lace DIN914 M2 To M5 Stainless Steel V2A - Hexagon socket set screws with tip din 914 - ISO 4027 Hexagon socket set screws with cone point din 914 - ISO 4027 Material: A2 stainless steel Size: M2 to M5 M6 to M10 available in our shop Application: Industry, trade, mechanical engineering, model making.
M2 & M2.5 Metric Stainless Steel Studding Grade A2 All Thread Threaded Rod Bar - CARE SHOULD BE TAKEN WHEN HANDLING STUDDING TO AVOID INJURY. ALLTHREAD THREADED BAR ROD S/S GR304. STAINLESS STEEL. DUE TO ANY BURRS / SHARP EDGES. VARIOUS QUANTITIES TO CHOOSE FROM. LENGTH TOLERANCE OF + / - 10mm & ROUGH CUT ONLY TO SIZE.
Mixed Bundle of 9 Threaded Steel Bar 34436 - Mixed Bundle of 9 Threaded Steel Bar 34436 Mixed Bundle of 9 Threaded Steel Bar 34436. Buy now and save! Pick up procedure is as follows PICK UP OPTION. Britool 15/16 AF 1/2" Drive Socket 5815. You might also like.
Steel All Thread, 5/8"-11 X 6", B7, M57, Course, Lot Of 2** - Approximate weight: 1 lbs. aucCounter span:hover { text-decoration:underline; }. aucHiddenCounter { display:none; }. aucCounterOrangeText { color:#FB6D05; font-family:Arial; Font-size:13px; Font-weight:bold; }.
2BA x 2 3/4" long allthread mild steel studs, threaded bar, s/c (250 pack) - Mild steel imperial allthread studs - 2BA x 2 3/4" long. Our range of short length allthread studs is unrivalled. No need to cut your studs from long lengths of threaded rod. Material:Mild steel. Thread:British Association.
2BA x 1 3/4" long allthread mild steel studs, threaded bar, s/c (400 pack) - Mild steel imperial allthread studs - 2BA x 1 3/4" long. Our range of short length allthread studs is unrivalled. No need to cut your studs from long lengths of threaded rod. Material:Mild steel. Thread:British Association.
2BA x 11/16" long allthread mild steel studs, threaded bar, s/c (500 pack) - Mild steel imperial allthread studs - 2BA x 11/16" long. Our range of short length allthread studs is unrivalled. No need to cut your studs from long lengths of threaded rod. Material:Mild steel. Thread:British Association.
Spacer rod, 5/8, 1.75", 3/8x16 - Spacer rod, hexagonal. /////////// En ESPAGNOL ////////////////////. Imagen(s): Puede haber varias cantidades de este artículo, por lo que es posible que no reciba el que está en la imagen. Presione el botón "ver detalles" en el lado derecho del precio y se mostrarán las diferentes opciones.
ForgeFix Flat Penny Washer ZP M10 x 25mm Bag 10 - Important Links. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools. Garden Tools. Drill Bits & Holesaws.
ForgeFix Flat Washer Form B ZP M8 Bag 100 - Flat Washer Form B ZP M8 Bag 100. MAC Trading LTD. Important Links. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools.
ForgeFix Dog Tooth Washer ZP 50 x 12mm Box 100 - Forgefix Dog Tooth Washers are mainly used with Carriage Bolts, where timber to timber connections are required. Power Tool Accessories. Tool Storage & Safety. Can be used with many types of bolts and fasteners, in particular Carriage Bolts.
ForgeFix Threaded Rod Stainless Steel M6 x 1m Single - Threaded Rod Stainless Steel M6 x 1m Box 1. Power Tool Accessories. Tool Storage & Safety. Top Categories. Power Tools. Hand Tools. Ladders & Accessories. Hardware & Security.
ForgeFix Flat Repair Washers ZP M12 x 40mm Bag 10 - Tool Storage & Safety. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools. Garden Tools. Drill Bits & Holesaws.
ForgeFix Flat Washer Form B ZP M12 Bag 100 - Flat Washer Form B ZP M12 Bag 100. MAC Trading LTD. Important Links. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools.
ForgeFix Spring Washers ZP M6 Bag 100 - Spring Washers ZP M6 Bag 100. Important Links. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools. Garden Tools.
ForgeFix Flat Penny Washer ZP M8 x 25mm Bag 10 - Important Links. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools. Garden Tools. Drill Bits & Holesaws.
ForgeFix Flat Repair Washers ZP M8 x 40mm Bag 10 - Tool Storage & Safety. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools. Garden Tools. Drill Bits & Holesaws.
ForgeFix Flat Mudguard Washers ZP M10 x 50mm Bag 10 - Flat Mudguard Washers ZP M10 x 50 Bag 10. Important Links. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools. Garden Tools.
ForgeFix Flat Repair Washers ZP M10 x 40mm Bag 10 - Tool Storage & Safety. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools. Garden Tools. Drill Bits & Holesaws.
ForgeFix Flat Washer Form B ZP M6 Bag 100 - Flat Washer Form B ZP M6 Bag 100. MAC Trading LTD. Important Links. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools.
ForgeFix Flat Penny Washer ZP M6 x 25mm Bag 10 - Important Links. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools. Garden Tools. Drill Bits & Holesaws.
ForgeFix Flat Washer Heavy-Duty ZP M12 Bag 100 - Flat Washer Heavy-Duty ZP M12 Box 10. Important Links. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools. Garden Tools.
ForgeFix Flat Washer Form B ZP M5 Bag 100 - Flat Washer Form B ZP M5 Bag 100. MAC Trading LTD. Important Links. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools.
ForgeFix Flat Penny Washer ZP M12 x 25mm Bag 10 - Important Links. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools. Garden Tools. Drill Bits & Holesaws.
ForgeFix Flat Washer Form B ZP M10 Bag 100 - Flat Washer Form B ZP M10 Bag 100. MAC Trading LTD. Important Links. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools.
Machinery Adjustment knob with shaft, M10x1.0 thread - Thread: M10x1.0. Shaft thread length: 45 mm. Picture(s): There may be multiple quantities of this item, so you may not receive the one in the picture. Envíos durante la noche, no hay problema. Presione el botón "ver detalles" en el lado derecho del precio y se mostrarán las diferentes opciones.
5pcs M2 Threaded Pins/Pin Screws with Tip DIN914 - ISO 4027 V2A - 5 Stück M2 Gewindestifte mit Innensechskant und Spitze DIN 914 - ISO 4027 5 x M2 Hexagon socket set screws with cone point DIN 914 - ISO 4027 Material: Edelstahl A2 Größe: M2 - verschiedene Längen M2 bis M10 bei uns im Shop erhältlich Anwendung: Industrie, Handwerk, Maschinenbau, Modellbau .
5pcs M4 Threaded Pins/Pin Screws with Tip DIN914 - ISO 4027 V2A - 5 Stück M4 Gewindestifte mit Innensechskant und Spitze DIN 914 - ISO 4027 5 x M4 Hexagon socket set screws with cone point DIN 914 - ISO 4027 Material: Edelstahl A2 Größe: M4 - verschiedene Längen M2 bis M10 bei uns im Shop erhältlich Anwendung: Industrie, Handwerk, Maschinenbau, Modellbau .
5pcs M2.5 Threaded Pins/Pin Screws with Tip DIN914 - ISO 4027 V2A - 5 Stück M2,5 Gewindestifte mit Innensechskant und Spitze DIN 914 - ISO 4027 5 x M2,5 Hexagon socket set screws with cone point DIN 914 - ISO 4027 Material: Edelstahl A2 Größe: M2,5 - verschiedene Längen M2 bis M10 bei uns im Shop erhältlich Anwendung: Industrie, Handwerk, Maschinenbau, Modellbau .
5pcs M6 Threaded Pins/Pin Screws with Tip DIN914 - ISO 4027 V2A - 5 Stück M6 Gewindestifte mit Innensechskant und Spitze DIN 914 - ISO 4027 5 x M6 Hexagon socket set screws with cone point DIN 914 - ISO 4027 Material: Edelstahl A2 Größe: M6 - verschiedene Längen M2 bis M10 bei uns im Shop erhältlich Anwendung: Industrie, Handwerk, Maschinenbau, Modellbau .
5pcs M3 Threaded Pins/Pin Screws with Tip DIN914 - ISO 4027 V2A - 5 Stück M3 Gewindestifte mit Innensechskant und Spitze DIN 914 - ISO 4027 5 x M3 Hexagon socket set screws with cone point DIN 914 - ISO 4027 Material: Edelstahl A2 Größe: M3 - verschiedene Längen M2 bis M10 bei uns im Shop erhältlich Anwendung: Industrie, Handwerk, Maschinenbau, Modellbau .
5pcs M5 Threaded Pins/Pin Screws with Tip DIN914 - ISO 4027 STAINLESS A2 - 5 Stück M5 Gewindestifte mit Innensechskant und Spitze DIN 914 - ISO 4027 5 x M5 Hexagon socket set screws with cone point DIN 914 - ISO 4027 Material: Edelstahl A2 Größe: M5 - verschiedene Längen M2 bis M10 bei uns im Shop erhältlich Anwendung: Industrie, Handwerk, Maschinenbau, Modellbau .
Threaded Rod To Beam Assembly 1/8"-1/4" Flange 3/8" Rod - MORRIS-18255 - This threaded rod is well-suited for applications where stability and load-bearing capacity are essential, ensuring a secure link between structural components. Upgrade your construction projects with the MORRIS-18255 Threaded Rod to Beam Assembly – a durable, adjustable, and easy-to-install solution that provides a secure connection between threaded rods and beams.
ForgeFix Square Plate Washer ZP 50 x 50 x 12mm Bag 10 - Square Plate Washer ZP 50 x 50 x 12mm Builder Bag. Important Links. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools. Garden Tools.
ForgeFix Flat Washer Form B ZP M4 Bag 100 - Flat Washer Heavy-Duty ZP M4 Bag 100. MAC Trading LTD. Important Links. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools.
ForgeFix Flat Penny Washer ZP M5 x 25mm Bag 10 - Important Links. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools. Garden Tools. Drill Bits & Holesaws.
ForgeFix Flat Mudguard Washers ZP M6 x 50mm Bag 10 - Flat Mudguard Washers ZP M6 x 50 Bag 10. Important Links. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools. Garden Tools.
ForgeFix TechFast Bonded EPDM Washer 6.3 x 19mm Box 100 - These Forgefix TechFast Bonded EPDM Washers have the following specification Size: 6.3 x 19mm. Power Tools. Power Tool Accessories. Ladders & Accessories. Hand Tools. Hardware & Security. Garden Tools.
ForgeFix Flat Washer Form B ZP ZP M20 Bag 10 - Flat Washer Heavy-Duty ZP M20 Bag 10. MAC Trading LTD. Important Links. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools.
ForgeFix Spring Washers ZP M12 Bag 100 - Spring Washers ZP M12 Bag 100. Important Links. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools. Garden Tools.
ForgeFix Flat Washer Heavy-Duty ZP M8 Bag 100 - Flat Washer Heavy-Duty ZP M8 Box 10. Important Links. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools. Garden Tools.
ForgeFix Flat Mudguard Washers ZP M8 x 50mm Bag 10 - Flat Mudguard Washers ZP M8 x 50 Bag 10. Important Links. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools. Garden Tools.
ForgeFix Threaded Rod Stainless Steel M12 x 1m Single - Threaded Rod Stainless Steel M12 x 1m Box 1. Power Tool Accessories. Tool Storage & Safety. Top Categories. Power Tools. Hand Tools. Ladders & Accessories. Hardware & Security.
ForgeFix Spring Washers ZP M8 Bag 100 - Spring Washers ZP M8 Bag 100. Important Links. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools. Garden Tools.
ForgeFix Flat Washer Heavy-Duty ZP M16 Bag 10 - Flat Washer Heavy-Duty ZP M16 Bag 10. Important Links. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools. Garden Tools.
ForgeFix Flat Washer Form B ZP M3 Bag 100 - Flat Washer Heavy-Duty ZP M3 Bag 100. MAC Trading LTD. Important Links. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools.
ForgeFix Threaded Rod Stainless Steel M8 x 1m Single - Threaded Rod Stainless Steel M8 x 1m Box 1. Power Tool Accessories. Tool Storage & Safety. Top Categories. Power Tools. Hand Tools. Ladders & Accessories. Hardware & Security.
ForgeFix Flat Repair Washers ZP M6 x 40mm Bag 10 - Tool Storage & Safety. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools. Garden Tools. Drill Bits & Holesaws.
ForgeFix TechFast Bonded EPDM Washer 6.3 x 16mm Box 100 - These Forgefix TechFast Bonded EPDM Washers have the following specification Size: 6.3 x 16mm. Power Tools. Power Tool Accessories. Ladders & Accessories. Hand Tools. Hardware & Security. Garden Tools.
ForgeFix Flat Washer Heavy-Duty ZP M10 Bag 100 - Flat Washer Heavy-Duty ZP M10 Box 10. Important Links. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools. Garden Tools.
ForgeFix Threaded Rod Stainless Steel M10 x 1m Single - Threaded Rod Stainless Steel M10 x 1m Box 1. Power Tool Accessories. Tool Storage & Safety. Top Categories. Power Tools. Hand Tools. Ladders & Accessories. Hardware & Security.
ForgeFix TechFast Bonded EPDM Washer 5.5 x 16mm Box 100 - These Forgefix TechFast Bonded EPDM Washers have the following specification Size: 5.5 x 16mm. Power Tools. Power Tool Accessories. Ladders & Accessories. Hand Tools. Hardware & Security. Garden Tools.
ForgeFix Spring Washers ZP M10 Bag 100 - Spring Washers ZP M10 Bag 100. Important Links. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools. Garden Tools.
ForgeFix Flat Washer Heavy-Duty ZP M6 Bag 100 - Flat Washer Heavy-Duty ZP M6 Box 10. Important Links. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools. Garden Tools.
RIDGID 1390M Threaded Rod Cutter 8mm 20271 - RIDGID 1390M Threaded Rod Cutter. Blade Size: 8mm. Power Tool Accessories. Tool Storage & Safety. Power Tools. Hardware & Security. Ladders & Accessories. Hand Tools.
ForgeFix Flat Washer Heavy-Duty ZP M4 Bag 100 - Flat Washer Heavy-Duty ZP M4 Bag 100. Important Links. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools. Garden Tools.
ForgeFix Spring Washers DIN127 ZP M5 ForgePack 80 - Important Links. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools. Garden Tools. Drill Bits & Holesaws.
ForgeFix Spring Washers ZP M5 Bag 100 - Spring Washers ZP M5 Bag 100. Important Links. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools. Garden Tools.
ForgeFix TechFast Bonded EPDM Washer 5.5 x 19mm Box 100 - These Forgefix TechFast Bonded EPDM Washers have the following specification Size: 5.5 x 19mm. Power Tools. Power Tool Accessories. Ladders & Accessories. Hand Tools. Hardware & Security. Garden Tools.
ForgeFix Flat Washer Form B ZP ZP M16 Bag 10 - Flat Washer Heavy-Duty ZP M16 Bag 10. MAC Trading LTD. Important Links. Power Tools. Power Tool Accessories. Ladders & Accessories. Hardware & Security. Hand Tools.
LOT of 4 HEAVY DUTY B7 STUD BOLT & NUTS 1-1/8 x 8.5” HIGH STRENGTH CARBON STEEL - LOT of (4) HEAVY DUTY HIGHLAND THREADS B7 STUD BOLT W/ NUTS 1-1/8” X 8-1/2” HIGH STRENGTH CARBON STEEL. ASTM A193 GRADE B7 STUDS, GRADE 2H NUTS. Quantity: (4) B7 stud, (8) 2H nuts. High Strength stud bolts for pressure-temperature piping.
M8 Threaded Metric Bar Studding Rod Connectors Nuts Washers Caps Zinc Mild Steel - Threaded Bar Studding Threaded BAR / ROD ZINC PLATED. M8 x 1.25 Pitch. ZINC Plated Steel Fully Threaded Rod / Threaded Bar. You can also chooseFull Nuts, Wing Nuts, Nyloc Nuts or From A Washer and Vinyl Thread Cover Cap from above if you need any of them with the threaded Rod.
Threaded Metric Bar Studding Rod Connectors Nuts Washers Caps Zinc Mild Steel - Threaded Bar Studding Threaded BAR / ROD ZINC PLATED-Sizes from M5 upto M30. ZINC Plated Steel Fully Threaded Rod / Threaded Bar. You can also chooseFull Nuts, Wing Nuts, Nyloc Nuts or From A Washer and Vinyl Thread Cover Cap from above if you need any of them with the threaded Rod.
M20 Threaded Metric Bar Studding Rod Connectors Nuts Washers Caps Zinc Steel - Threaded Bar Studding Threaded BAR / ROD ZINC PLATED. M20 x 2.5 Pitch. ZINC Plated Steel Fully Threaded Rod / Threaded Bar. You can also chooseFull Nuts, Wing Nuts, Nyloc Nuts or From A Washer and Vinyl Thread Cover Cap from above if you need any of them with the threaded Rod.
M30 Threaded Metric Bar Studding Rod Connectors Nuts Washers Caps Zinc Steel - Threaded Bar Studding Threaded BAR / ROD ZINC PLATED. M30 x 3.5 Pitch. ZINC Plated Steel Fully Threaded Rod / Threaded Bar. You can also chooseFull Nuts, Wing Nuts, Nyloc Nuts or From A Washer and Vinyl Thread Cover Cap from above if you need any of them with the threaded Rod.
M16 Threaded Metric Bar Studding Rod Connectors Nuts Washers Caps Zinc Steel - Threaded Bar Studding Threaded BAR / ROD ZINC PLATED. M16 x 2.0 Pitch. ZINC Plated Steel Fully Threaded Rod / Threaded Bar. You can also chooseFull Nuts, Wing Nuts, Nyloc Nuts or From A Washer and Vinyl Thread Cover Cap from above if you need any of them with the threaded Rod.
M10 Threaded Metric Bar Studding Rod Connectors Nuts Washers Caps Zinc Steel - Threaded Bar Studding Threaded BAR / ROD ZINC PLATED. M10 x 1.50 Pitch. ZINC Plated Steel Fully Threaded Rod / Threaded Bar. You can also chooseFull Nuts, Wing Nuts, Nyloc Nuts or From A Washer and Vinyl Thread Cover Cap from above if you need any of them with the threaded Rod.
M12 Threaded Metric Bar Studding Rod Connectors Nuts Washers Caps Zinc Steel - Threaded Bar Studding Threaded BAR / ROD ZINC PLATED. M12 x 1.75 Pitch. ZINC Plated Steel Fully Threaded Rod / Threaded Bar. You can also chooseFull Nuts, Wing Nuts, Nyloc Nuts or From A Washer and Vinyl Thread Cover Cap from above if you need any of them with the threaded Rod.
M24 Threaded Metric Bar Studding Rod Connectors Nuts Washers Caps Zinc Steel - Threaded Bar Studding Threaded BAR / ROD ZINC PLATED. M24 x 3.0 Pitch. ZINC Plated Steel Fully Threaded Rod / Threaded Bar. You can also chooseFull Nuts, Wing Nuts, Nyloc Nuts or From A Washer and Vinyl Thread Cover Cap from above if you need any of them with the threaded Rod.
M5 Threaded Metric Bar Studding Rod Connectors Nuts Washers Caps Zinc Mild Steel - Threaded Bar Studding Threaded BAR / ROD ZINC PLATED. ZINC Plated Steel Fully Threaded Rod / Threaded Bar. You can also chooseFull Nuts, Wing Nuts, Nyloc Nuts or From A Washer and Vinyl Thread Cover Cap from above if you need any of them with the threaded Rod.
M6 Threaded Metric Bar Studding Rod Connectors Nuts Washers Caps Zinc Mild Steel - Threaded Bar Studding Threaded BAR / ROD ZINC PLATED. M6 x 1.0 Pitch. ZINC Plated Steel Fully Threaded Rod / Threaded Bar. You can also chooseFull Nuts, Wing Nuts, Nyloc Nuts or From A Washer and Vinyl Thread Cover Cap from above if you need any of them with the threaded Rod.
Threaded Black Stud Bolt 1" O.D. X 6-1/4" W/ Hex Nuts & Washers Long (Lot of 10) - You are purchasingTen (10) - Threaded Black Stud Bolt 1" O.D. X 6-1/4" Long W/ (2) 2H Heavy Hex Nuts & (2) Flat Washers. We pride ourselves in being one of the largest new surplus pipe, valve, and fitting distributors in the United States.
Threaded Black Stud Bolt 1" O.D. X 5-1/2" Long W/ Hex Nuts & Washers (Lot of 10) - You are purchasingTen (10) - Threaded Black Stud Bolt 1" O.D. X 5-1/2" Long W/ (2) 2H Heavy Hex Nuts & (2) Flat Washers. We pride ourselves in being one of the largest new surplus pipe, valve, and fitting distributors in the United States.
Threaded Black Stud Bolt 1/2" O.D. X 2-3/4" W/ Hex Nuts & Washers (Lot of 20) - You are purchasingTwenty (20) - Threaded Black Stud Bolt 1/2" O.D. X 2-3/4" Long W/ (2) 2H Heavy Hex Nuts & (2) Flat Washers. We pride ourselves in being one of the largest new surplus pipe, valve, and fitting distributors in the United States.
Threaded Black Stud Bolt 1-1/4" O.D. X 7-1/4" W/ Hex Nuts & Washers (Lot of 6) - You are purchasingSix (6) - Threaded Black Stud Bolt 1-1/4" O.D. X 7-1/4" Long W/ (2) 2H Heavy Hex Nuts & (2) Flat Washers. We pride ourselves in being one of the largest new surplus pipe, valve, and fitting distributors in the United States.
Threaded Black Stud Bolt 1-1/4" O.D. X 7" W/ Hex Nuts & Washers (Lot of 6) - You are purchasingSix (6) - Threaded Black Stud Bolt 1-1/4" O.D. X 7" Long W/ (2) 2H Heavy Hex Nuts & (2) Flat Washers. We pride ourselves in being one of the largest new surplus pipe, valve, and fitting distributors in the United States.
Threaded Black Stud Bolt 1-1/8" O.D. X 7-1/4" W/ Hex Nuts & Washers (Lot of 6) - You are purchasingSix (6) - Threaded Black Stud Bolt 1-1/8" O.D. X 7-1/4" Long W/ (2) 2H Heavy Hex Nuts & (2) Flat Washers. We pride ourselves in being one of the largest new surplus pipe, valve, and fitting distributors in the United States.
Threaded Black Stud Bolt 1-1/8" O.D. X 6-1/4" W/ Hex Nuts & Washers (Lot of 6) - You are purchasingSix (6) - Threaded Black Stud Bolt 1-1/8" O.D. X 6-1/4" Long W/ (2) 2H Heavy Hex Nuts & (2) Flat Washers. We pride ourselves in being one of the largest new surplus pipe, valve, and fitting distributors in the United States.
Threaded Black Stud Bolt 1-1/8" O.D. X 6-1/2" W/ Hex Nuts & Washers (Lot of 6) - You are purchasingSix (6) - Threaded Black Stud Bolt 1-1/8" O.D. X 6-1/2" Long W/ (2) 2H Heavy Hex Nuts & (2) Flat Washers. We pride ourselves in being one of the largest new surplus pipe, valve, and fitting distributors in the United States.
Threaded Black Stud Bolt 1-1/8" O.D. X 5" Long W/ Hex Nuts & Washers (Lot of 6) - You are purchasingSix (6) - Threaded Black Stud Bolt 1-1/8" O.D. X 5" Long W/ (2) 2H Heavy Hex Nuts & (2) Flat Washers. We pride ourselves in being one of the largest new surplus pipe, valve, and fitting distributors in the United States.
Threaded Black Stud Bolt 1" O.D. X 6-3/4" W/ Hex Nuts & Washers Long (Lot of 10) - You are purchasingTen (10) - Threaded Black Stud Bolt 1" O.D. X 6-3/4" Long W/ (2) 2H Heavy Hex Nuts & (2) Flat Washers. We pride ourselves in being one of the largest new surplus pipe, valve, and fitting distributors in the United States.
Threaded Black Stud Bolt 1" O.D. X 5-3/4" W/ Hex Nuts & Washers Long (Lot of 10) - You are purchasingTen (10) - Threaded Black Stud Bolt 1" O.D. X 5-3/4" Long W/ (2) 2H Heavy Hex Nuts & (2) Flat Washers. We pride ourselves in being one of the largest new surplus pipe, valve, and fitting distributors in the United States.
Threaded Black Stud Bolt 1" O.D. X 5-1/2" W/ Hex Nuts & Washers Long (Lot of 10) - You are purchasingTen (10) - Threaded Black Stud Bolt 1" O.D. X 5-1/2" Long W/ (2) 2H Heavy Hex Nuts & (2) Flat Washers. We pride ourselves in being one of the largest new surplus pipe, valve, and fitting distributors in the United States.
Threaded Black Stud Bolt W/ Hex Nuts & Washers 7/8" O.D. X 5-1/4" Lg (Lot of 15) - You are purchasingFifteen (15) - Threaded Black Stud Bolt 7/8" O.D. X 5-1/4" Long W/ (2) 2H Heavy Hex Nuts & (2) Flat Washers. We pride ourselves in being one of the largest new surplus pipe, valve, and fitting distributors in the United States.
Threaded Black Stud Bolt W/ Hex Nuts & Washers 7/8" O.D. X 4" Long (Lot of 15) - You are purchasingFifteen (15) - Threaded Black Stud Bolt 7/8" O.D. X 4" Long W/ (2) 2H Heavy Hex Nuts & (2) Flat Washers. We pride ourselves in being one of the largest new surplus pipe, valve, and fitting distributors in the United States.
Threaded Black Stud Bolt W/ Hex Nuts & Washers 3/4" O.D. X 7-1/2" Lg (Lot of 15) - You are purchasingFifteen (15) - Threaded Black Stud Bolt 3/4" O.D. X 7-1/2" Long W/ (2) 2H Heavy Hex Nuts & (2) Flat Washers. We pride ourselves in being one of the largest new surplus pipe, valve, and fitting distributors in the United States.
3/4"-10 Threaded Stud Stainless Steel, 3 1/4" Long, Lot Of 8 Pcs - 3/4"-10 Threaded Stud Stainless Steel, 3 1/4" Long, Lot Of 8Pcs. Shipped with USPS First Class Package.As per photosThis sale is for a lot of 8 pcs in this photosOne end is crowned and other is straight cut offThanksJohnD1
3/4"-10 Threaded Stud Stainless Steel, 3 3/4" Long, Lot Of 9 Pcs - 3/4"-10 Threaded Stud Stainless Steel, 3 3/4" Long, Lot Of 9 Pcs. Shipped with USPS First Class Package.As per photosThis sale is for a lot of 9 pcs in this photosOne end is crowned and other is straight cut offThanksJohnS3
Threaded Stud Bolt 1-3/4" x 12-1/2" Long with Two (2) Heavy Hex Nuts - Quantity subject to change. We pride ourselves in being one of the largest new surplus pipe, valve, and fitting distributors in the United States. It’s what we do, we do it well! Approximate Weight:14 lbs.
A2 Stainless Steel Metric Exhaust Manifold Studs Din938 M6 M8 M10 - Type - DIN938. DO NOT include the small threaded end (for M8 studs this is + 8mm). M8 x 35 = 20mm + 15mm. M8 x 40 = 20mm + 20mm. M8 x 45 = 20mm + 25mm. M8 x 50 = 20mm + 30mm. M8 x 55 = 25mm + 30mm.
7/16", A2 Unc Stainless Steel Fully Threaded Rod Bar Studding All Thread - A2 UNC (36" Length) Stainless Steel Threaded Bar. A2 UNC Stainless Steel Threaded Bar. All threads are UNC Thread. Available in 1, 2, 3, 5 or 10, Threaded Bars. Bolt World. Also Available in 6, 8, 10, 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4", 7/8", 1", 1.1/4" or 1.1/2.
#6, A2 Unc Stainless Steel Fully Threaded Rod Bar Studding Allthread - #6, A2 UNC STAINLESS STEEL FULLY THREADED ROD BAR STUDDING ALLTHREAD A2 UNC (36" Length) Stainless Steel Threaded Bar. A2 UNC Stainless Steel Threaded Bar. All threads are UNC Thread. Available in 1, 2, 3, 5 or 10, Threaded Bars.
5/16" Imperial A2 Unc Stainless Steel Fully Threaded Rod Bar Studding All Thread - 5/16" IMPERIAL A2 UNC STAINLESS STEEL FULLY THREADED ROD BAR STUDDING ALL THREAD A2 UNC (36" Length) Stainless Steel Threaded Bar. A2 UNC Stainless Steel Threaded Bar. All threads are UNC Thread. Available in 1, 2, 3, 5 or 10, Threaded Bars.
M20 X 100mm GRUB SCREWS, QTY.10 Pcs. HEX SOCKET HEAD, FABORY - 10 x FABORY M20 X 100mm Long. Thead Pitch 2.5, Hex Key width 10mm/0.4". HEXAGON SOCKET SET SCREW WITH CUP POINT. Often used for holding a pulley, gear, or other parts from turning relative to a shaft.
M10 Threaded Rod Clip 54Mm Pack Of 10 - Fits to M10 Threaded rodRubber Lined for Anti-Vibration, Sound ReductionSuitable for temperatures between -40° and 140°Low moisture sensitivity and resistant to solvents, hydrolysis battery acid and salt solutionsSuitable for A/C and refrigeration pipeworkSold as a Pack of 10
M10 Threaded Rod Clip 50Mm Pack Of 10 - Fits to M10 Threaded rodRubber Lined for Anti-Vibration, Sound ReductionSuitable for temperatures between -40° and 140°Low moisture sensitivity and resistant to solvents, hydrolysis battery acid and salt solutionsSuitable for A/C and refrigeration pipeworkSold as a Pack of 10
M10 Threaded Rod Clip 42Mm Pack Of 10 - Fits to M10 Threaded rodRubber Lined for Anti-Vibration, Sound ReductionSuitable for temperatures between -40° and 140°Low moisture sensitivity and resistant to solvents, hydrolysis battery acid and salt solutionsSuitable for A/C and refrigeration pipeworkSold as a Pack of 10
M10 Threaded Rod Clip 40Mm Pack Of 10 - Fits to M10 Threaded rodRubber Lined for Anti-Vibration, Sound ReductionSuitable for temperatures between -40° and 140°Low moisture sensitivity and resistant to solvents, hydrolysis battery acid and salt solutionsSuitable for A/C and refrigeration pipeworkSold as a Pack of 10
M10 Threaded Rod Clip 35Mm Pack Of 10 - Fits to M10 Threaded rodRubber Lined for Anti-Vibration, Sound ReductionSuitable for temperatures between -40° and 140°Low moisture sensitivity and resistant to solvents, hydrolysis battery acid and salt solutionsSuitable for A/C and refrigeration pipeworkSold as a Pack of 10
M10 Threaded Rod Clip 32Mm Pack Of 10 - Fits to M10 Threaded rodRubber Lined for Anti-Vibration, Sound ReductionSuitable for temperatures between -40° and 140°Low moisture sensitivity and resistant to solvents, hydrolysis battery acid and salt solutionsSuitable for A/C and refrigeration pipeworkSold as a Pack of 10
M10 Threaded Rod Clip 28Mm Pack Of 10 - Fits to M10 Threaded rodRubber Lined for Anti-Vibration, Sound ReductionSuitable for temperatures between -40° and 140°Low moisture sensitivity and resistant to solvents, hydrolysis battery acid and salt solutionsSuitable for A/C and refrigeration pipeworkSold as a Pack of 10
M10 Threaded Rod Clip 25Mm Pack Of 10 - Fits to M10 Threaded rodRubber Lined for Anti-Vibration, Sound ReductionSuitable for temperatures between -40° and 140°Low moisture sensitivity and resistant to solvents, hydrolysis battery acid and salt solutionsSuitable for A/C and refrigeration pipeworkSold as a Pack of 10
M10 Threaded Rod Clip 22Mm Pack Of 10 - Fits to M10 Threaded rodRubber Lined for Anti-Vibration, Sound ReductionSuitable for temperatures between -40° and 140°Low moisture sensitivity and resistant to solvents, hydrolysis battery acid and salt solutionsSuitable for A/C and refrigeration pipeworkSold as a Pack of 10
M10 Threaded Rod Clip 20Mm Pack Of 10 - Fits to M10 Threaded rodRubber Lined for Anti-Vibration, Sound ReductionSuitable for temperatures between -40° and 140°Low moisture sensitivity and resistant to solvents, hydrolysis battery acid and salt solutionsSuitable for A/C and refrigeration pipeworkSold as a Pack of 10
M10 Threaded Rod Clip 15Mm Pack Of 10 - Fits to M10 Threaded rodRubber Lined for Anti-Vibration, Sound ReductionSuitable for temperatures between -40° and 140°Low moisture sensitivity and resistant to solvents, hydrolysis battery acid and salt solutionsSuitable for A/C and refrigeration pipeworkSold as a Pack of 10
M8 Threaded Rod Clip 54Mm Pack Of 10 - Fits to M8 Threaded rodRubber Lined for Anti-Vibration, Sound ReductionSuitable for temperatures between -40° and 140°Low moisture sensitivity and resistant to solvents, hydrolysis battery acid and salt solutionsSuitable for A/C and refrigeration pipeworkSold as a Pack of 10
M8 Threaded Rod Clip 50Mm Pack Of 10 - Fits to M8 Threaded rodRubber Lined for Anti-Vibration, Sound ReductionSuitable for temperatures between -40° and 140°Low moisture sensitivity and resistant to solvents, hydrolysis battery acid and salt solutionsSuitable for A/C and refrigeration pipeworkSold as a Pack of 10
M8 Threaded Rod Clip 42Mm Pack Of 10 - Fits to M8 Threaded rodRubber Lined for Anti-Vibration, Sound ReductionSuitable for temperatures between -40° and 140°Low moisture sensitivity and resistant to solvents, hydrolysis battery acid and salt solutionsSuitable for A/C and refrigeration pipeworkSold as a Pack of 10
M8 Threaded Rod Clip 40Mm Pack Of 10 - Fits to M8 Threaded rodRubber Lined for Anti-Vibration, Sound ReductionSuitable for temperatures between -40° and 140°Low moisture sensitivity and resistant to solvents, hydrolysis battery acid and salt solutionsSuitable for A/C and refrigeration pipeworkSold as a Pack of 10
M8 Threaded Rod Clip 35Mm Pack Of 10 - Fits to M8 Threaded rodRubber Lined for Anti-Vibration, Sound ReductionSuitable for temperatures between -40° and 140°Low moisture sensitivity and resistant to solvents, hydrolysis battery acid and salt solutionsSuitable for A/C and refrigeration pipeworkSold as a Pack of 10
M8 Threaded Rod Clip 32Mm Pack Of 10 - Fits to M8 Threaded rodRubber Lined for Anti-Vibration, Sound ReductionSuitable for temperatures between -40° and 140°Low moisture sensitivity and resistant to solvents, hydrolysis battery acid and salt solutionsSuitable for A/C and refrigeration pipeworkSold as a Pack of 10
M8 Threaded Rod Clip 28Mm Pack Of 10 - Fits to M8 Threaded rodRubber Lined for Anti-Vibration, Sound ReductionSuitable for temperatures between -40° and 140°Low moisture sensitivity and resistant to solvents, hydrolysis battery acid and salt solutionsSuitable for A/C and refrigeration pipeworkSold as a Pack of 10
M8 Threaded Rod Clip 25Mm Pack Of 10 - Fits to M8 Threaded rodRubber Lined for Anti-Vibration, Sound ReductionSuitable for temperatures between -40° and 140°Low moisture sensitivity and resistant to solvents, hydrolysis battery acid and salt solutionsSuitable for A/C and refrigeration pipeworkSold as a Pack of 10
M8 Threaded Rod Clip 22Mm Pack Of 10 - Fits to M8 Threaded rodRubber Lined for Anti-Vibration, Sound ReductionSuitable for temperatures between -40° and 140°Low moisture sensitivity and resistant to solvents, hydrolysis battery acid and salt solutionsSuitable for A/C and refrigeration pipeworkSold as a Pack of 10
M8 Threaded Rod Clip 20Mm Pack Of 10 - Fits to M8 Threaded rodRubber Lined for Anti-Vibration, Sound ReductionSuitable for temperatures between -40° and 140°Low moisture sensitivity and resistant to solvents, hydrolysis battery acid and salt solutionsSuitable for A/C and refrigeration pipeworkSold as a Pack of 10
M8 Threaded Rod Clip 15Mm Pack Of 10 - Fits to M8 Threaded rodRubber Lined for Anti-Vibration, Sound ReductionSuitable for temperatures between -40° and 140°Low moisture sensitivity and resistant to solvents, hydrolysis battery acid and salt solutionsSuitable for A/C and refrigeration pipeworkSold as a Pack of 10
T8 8mm Stainless Steel Threaded Lead Screw Rod Brass Nut 3D Printer Part 300mm - Length: 100mm, 150mm, 200mm, 250mm, 300mm, 330mm, 350mm, 400mm, 500mm (Optional). Lead of Thread: 8mm. Thread Pitch: 2mm. Application: For 3D printer. Color: Screw-silver; nut: gold. 1 x Screw Rod. Stainless steel material, not rust, durable.
Threaded Rod, 5 Piece Galv. Galvanized M10 1000 MM Long - Threaded rod, galv. Galvanized. Continuous metric thread Please contact us and we will create a personal offer for you on Ebay. You can find accessories in our shop.
M24 Threaded Rod - High Tensile Steel 8.8 Grade - 1 Meter (HDG) (Pack of 5) - M24 Threaded Rod - High Tensile Steel 8.8 Grade - 1 Meter (HDG)Grade 8.8 Steel - Coarse Pitch ThreadDIN 9761 Meter LengthHot Dipped Galvanised (HDG) Corrosion Resistant - For External / Internal Use**This items thread pattern is only compatible with Hot Dipped Galvanised nuts (Not suitable for BZP and Stainless Steel range)**Sold as a pack of 5
M20 Threaded Rod - High Tensile Steel 8.8 Grade - 1 Meter (HDG) (Pack of 10) - M20 Threaded Rod - High Tensile Steel 8.8 Grade - 1 Meter (HDG)Grade 8.8 Steel - Coarse Pitch ThreadDIN 9761 Meter LengthHot Dipped Galvanised (HDG) Corrosion Resistant - For External / Internal Use**This items thread pattern is only compatible with Hot Dipped Galvanised nuts (Not suitable for BZP and Stainless Steel range)**Sold as a pack of 10
M16 Threaded Rod - High Tensile Steel 8.8 Grade - 1 Meter (HDG) (PACK OF 10) - M16 Threaded Rod - High Tensile Steel 8.8 Grade - 1 Meter (HDG)Grade 8.8 Steel - Coarse Pitch ThreadDIN 9761 Meter LengthHot Dipped Galvanised (HDG) Corrosion Resistant - For External / Internal Use**This items thread pattern is only compatible with Hot Dipped Galvanised nuts (Not suitable for BZP and Stainless Steel range)**Sold as a pack of 10
M12 Threaded Rod - High Tensile Steel 8.8 Grade - 1 Meter (HDG) (Pack of 25) - M12 Threaded Rod - High Tensile Steel 8.8 Grade - 1 Meter (HDG)Grade 8.8 Steel - Coarse Pitch ThreadDIN 9761 Meter LengthHot Dipped Galvanised (HDG) Corrosion Resistant - For External / Internal Use**This items thread pattern is only compatible with Hot Dipped Galvanised nuts (Not suitable for BZP and Stainless Steel range)**Sold as a pack of 25
M10 Threaded Rod - High Tensile Steel 8.8 Grade - 1 Meter (HDG) (Pack of 25) - M10 Threaded Rod - High Tensile Steel 8.8 Grade - 1 Meter (HDG)Grade 8.8 Steel - Coarse Pitch ThreadDIN 9761 Meter LengthHot Dipped Galvanised (HDG) Corrosion Resistant - For External / Internal Use**This items thread pattern is only compatible with Hot Dipped Galvanised nuts (Not suitable for BZP and Stainless Steel range)**Sold as a pack of 25
M8 Threaded Rod - High Tensile Steel 8.8 Grade - 1 Meter (HDG) (Pack of 50) - M8 Threaded Rod - High Tensile Steel 8.8 Grade - 1 Meter (HDG)Grade 8.8 Steel - Coarse Pitch ThreadDIN 9761 Meter LengthHot Dipped Galvanised (HDG) Corrosion Resistant - For External / Internal Use**This items thread pattern is only compatible with Hot Dipped Galvanised nuts (Not suitable for BZP and Stainless Steel range)**Sold as a pack of 50
M20 Threaded Rod (4.8 Grade) - 1 Meter (HDG) (Pack of 10) - M20 Threaded Rod (HDG)Hot Dipped Galvanised (HDG) Corrosion Resistant - For External / Internal Use.Grade 4.8 Mild Steel1 Meter Length**This items thread pattern is only compatible with Hot Dipped Galvanised nuts (Not suitable for BZP and Stainless Steel range)**Sold as a pack of 10
M12 Threaded Rod (4.8 Grade) - 1 Meter (HDG) (Pack of 25) - M12 Threaded Rod (HDG)Hot Dipped Galvanised (HDG) Corrosion Resistant - For External / Internal Use.Grade 4.8 Mild Steel1 Meter Length**This items thread pattern is only compatible with Hot Dipped Galvanised nuts (Not suitable for BZP and Stainless Steel range)**Sold as a pack of 25
M10 Threaded Rod (4.8 Grade) - 1 Meter (HDG) (Pack of 25) - M10 Threaded Rod (HDG)Hot Dipped Galvanised (HDG) Corrosion Resistant - For External / Internal Use.Grade 4.8 Mild Steel1 Meter Length**This items thread pattern is only compatible with Hot Dipped Galvanised nuts (Not suitable for BZP and Stainless Steel range)**Sold as a pack of 25
M8 Threaded Rod (4.8 Grade) - 1 Meter (HDG) (Pack of 50) - M8 Threaded Rod (HDG)Grade 4.8 Steel - 1.25mm Coarse Pitch ThreadDIN 9751 Meter LengthHot Dipped Galvanised (HDG) Corrosion Resistant - For External / Internal Use**This items thread pattern is only compatible with Hot Dipped Galvanised nuts (Not suitable for BZP and Stainless Steel range)**Sold as a pack of 50
Thin Sheet Threaded Insert 6.0mm Pk 50 Connect 32799 - Thin Sheet Threaded Inserts. Spark Plug Tools. Direct Fit. Glow Plugs. Manufacturer Part NumberConnect. Denso Spark Plugs. Champion Spark Plugs. 6.0mm ID Thread.
Thin Sheet Threaded Insert 8.0mm Pk 50 Connect 32795 - Thin Sheet Threaded Inserts. Spark Plug Tools. Direct Fit. Open end type. Glow Plugs. Manufacturer Part NumberConnect. Denso Spark Plugs. Champion Spark Plugs.
Half-Hex Threaded Insert 12.0mm Pk 50 Connect 32807 - Spark Plug Tools. Half-Hex Threaded Insert. Direct Fit. Open end type. Glow Plugs. Manufacturer Part NumberConnect. Denso Spark Plugs. Champion Spark Plugs.
Full Hex Threaded Insert 12.0mm Pack 50 Connect 35109 - Spark Plug Tools. Full-Hex Threaded Insert. Plain Collar with Full Hex Body. 12.0mm ID Thread. Heavy Duty. Direct Fit. Car Care > Tools > General Hand Tools. Open End Type.
Full Hex Threaded Insert 8.0mm Pack 50 Connect 35107 - Spark Plug Tools. Full-Hex Threaded Insert. Plain Collar with Full Hex Body. 8.0mm ID Thread. Heavy Duty. Direct Fit. Car Care > Tools > General Hand Tools. Open End Type.
Full Hex Threaded Insert 10.0mm Pack 50 Connect 35108 - Spark Plug Tools. Full-Hex Threaded Insert. Plain Collar with Full Hex Body. 10.0mm ID Thread. Heavy Duty. Direct Fit. Car Care > Tools > General Hand Tools. Open End Type.
Full Hex Threaded Insert 4.0mm Pack 50 Connect 35105 - Spark Plug Tools. Full-Hex Threaded Insert. Plain Collar with Full Hex Body. 4.0mm ID Thread. Heavy Duty. Direct Fit. Car Care > Tools > General Hand Tools. Open End Type.
Thin Sheet Threaded Insert 10.0mm Pk 50 Connect 32796 - Thin Sheet Threaded Inserts. Spark Plug Tools. Direct Fit. Open End Type. Glow Plugs. Manufacturer Part NumberConnect. Denso Spark Plugs. Champion Spark Plugs.
Thin Sheet Threaded Insert 6.0mm Pk 50 Connect 32794 - Spark Plug Tools. Thin Sheet Thread Inserts. Direct Fit. Open end type. Glow Plugs. Manufacturer Part NumberConnect. Denso Spark Plugs. Champion Spark Plugs.
Half-Hex Threaded Insert 8.0mm Pk 50 Connect 32805 - Spark Plug Tools. Half-Hex Threaded Insert. Direct Fit. Open end type. Glow Plugs. Manufacturer Part NumberConnect. Denso Spark Plugs. Champion Spark Plugs.
Half-Hex Threaded Insert 10.0mm Pk 50 Connect 32806 - Spark Plug Tools. Half-Hex Threaded Insert. Direct Fit. Open end type. Glow Plugs. Manufacturer Part NumberConnect. Denso Spark Plugs. Champion Spark Plugs.
Thin Sheet Threaded Insert 4.0mm Pk 50 Connect 32793 - Thin Sheet Threaded Inserts. Spark Plug Tools. Direct Fit. Open end type. Glow Plugs. Manufacturer Part NumberConnect. Denso Spark Plugs. Champion Spark Plugs.
Steel 10mm M10 Allthread 15mm Long Hollow Rod FREE UK POSTAGE - Steel 10mm Allthread 15mm Long Hollow Rod. These 10mm Allthreads are 15mm long and have a hollow centre to allow the flex to run up the middle. For the fixing of lamp holders with a 10mm threaded base fixing.
115015EG Caddy 1-1/2” Conduit Loop Hanger, 3/8” Rod, Box Of 100, NIB - 115015EG Caddy 1-1/2” Conduit Loop Hanger, 3/8” Rod. Condition is New. The 115 Standard Duty Loop Hanger is ideal for suspending stationary, non-insulated pipe lines, including CPVC pipes, in fire sprinkler systems.
(4) Blue Teflon Coated B7 Studs 7/8" X 7" w/ (2) 2H Heavy Hex Nuts - We pride ourselves in being one of the largest new surplus pipe, valve, and fitting distributors in the United States. Four (4) -. It’s what we do, we do it well! You are purchasing Free local pick up.
Industrial Stainless Steel Rod M5 Short Thread Ø 10mm SW8 System Holding Rod L~325mm - Cables & Adapters / Kabel. System Cases / Gehäuse. HDDs / Hard Disk Drives. Rechnung mit ausgew. Wir bemühen uns dann schnellstmöglich um eine faire Lösung für Sie! Laptop Parts. Sound Cards. Des Weiteren geben wir aufNeuware 24 Monate und aufGebrauchtware 12 Monate Gewährleistung.
Zinc Plated Steel Threaded Rod Bar M8 x 300mm Includes Lock Nuts & Washers 8mm - Thread is M8 x 300mm with lock nuts and washers. Buggy, Gokart, Prokart. Zinc plated to protect from rusting. Double nuts set for firm positioning. Strong steel rod for use in multiple applications. This varies depending on your location, and the options are displayed at the top of each ad.
3/4"-10 x 9" Coarse Thread A193 Grade B7 Stud (End to End) Plain Finish - Thread Pitch Type: Coarse. Thread Pitch: 10. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Fastener Type: Stud (End to End). Studs are a relatively long rod that is threaded on both ends; the thread may extend along the complete length of the rod and are designed to be used in tension.
Brass BZP Stainless Steel Studding THREADED ROD Bar Studs 1 MTR Long - Available in 3 Materials - BZP Steel, A2 grade 304 Stainless Steel or Brass. 1 Mtr Long Threaded Rod / Studding. Fully threaded studs and rods are ideal for applications where a screw head is not needed or space is precious.
Threaded Rod Bolts 1m. Steel Galvanized 4.8 - 8.8 - 10.9 or A2 A4 Stainless Steel - Gewindestange Din 976A Stahl/galv. Gewindestange Din 976A Edelstahl A2. Gewindestange Din 976A Edelstahl A4. Gewindestangen aus Edelstahl sind Stahlstangen, an dessen Außenseite sich ein durchgehendes Gewinde über die gesamte Länge erstreckt.
Misalignment Spacer Washer Metric Imperial Tapered Joint Size Reducer - CNC precision machined. Protective coated for corrosion resistance (Bright Zinc Plated). Ideal for use as a spacer with all types of rod end. Finish :- Zinc Plated. Material :- Steel. (B) :- 6MM. (E) :- 5MM.
High Misalignment Angle Reducer Reducers Spacers Rod End Joint 12mm-10mm - This allow's for more of the ball to rotate up into the body, thus allowing for higher degrees of articulation.These spacers are CNC machined from steel with a Zinc finish for corrosion resistance. CNC precision machined.
High Misalignment Angle Reducer Reducers Spacers Rod End Joint 12mm-8mm - This allow's for more of the ball to rotate up into the body, thus allowing for higher degrees of articulation.These spacers are CNC machined from steel with a Zinc finish for corrosion resistance. CNC precision machined.
High Misalignment Angle Reducer Reducers Spacers Rod End Joint 10mm-8mm - This allow's for more of the ball to rotate up into the body, thus allowing for higher degrees of articulation.These spacers are CNC machined from steel with a Zinc finish for corrosion resistance. CNC precision machined.
Rod End High Misalignment Spacers Reducers Heim Joints Metric size - This allow's for more of the ball to rotate up into the body, thus allowing for higher degrees of articulation.These spacers are CNC machined from steel with a Zinc finish for corrosion resistance. CNC precision machined.
5/8" Cone Spacer Heims Heim Joint Rod End Ends Joints Imperial Size - CONE SPACERS IMPERIAL SIZE. CNC precision machined. Protective coated for corrosion resistance (Bright Zinc Plated). Note: Due to the difference between different monitors, the pictures may not reflect the actual colour of the item.
1/2" Cone Spacer Heims Heim Joint Rod End Ends Joints Imperial Size - 1/2" CONE SPACERS IMPERIAL SIZE. CNC precision machined. Protective coated for corrosion resistance (Bright Zinc Plated). Note: Due to the difference between different monitors, the pictures may not reflect the actual colour of the item.
3/4" 1/2" 5/8" Imperial Size Cone Spacer Heims Heim Joint Rod End Ends Joints - CONE SPACERS IMPERIAL SIZE. CNC precision machined. Protective coated for corrosion resistance (Bright Zinc Plated). Note: Due to the difference between different monitors, the pictures may not reflect the actual colour of the item.
20Mm Cone Spacer Heims Heim Joint Rod End Ends Joints M20 Cone Washer - SIZE :- M20. Note: Due to the difference between different monitors, the pictures may not reflect the actual colour of the item. Finish :- zink Plated. CNC precision machined. Protective coated for corrosion resistance (Bright Zinc Plated).
M18 Cone Spacer Heims Heim Joint Rod End Ends Joints 18Mm Cone Washer - SIZE :- M18. Note: Due to the difference between different monitors, the pictures may not reflect the actual colour of the item. Finish :- zink Plated. CNC precision machined. Protective coated for corrosion resistance (Bright Zinc Plated).
M16 Cone Spacer Heims Heim Joint Rod End Ends Joints 16Mm Cone Washer - SIZE :- M16. Note: Due to the difference between different monitors, the pictures may not reflect the actual colour of the item. Finish :- zink Plated. CNC precision machined. Protective coated for corrosion resistance (Bright Zinc Plated).
M14 Cone Spacer Heims Heim Joint Rod End Ends Joints 14Mm Cone Washer - SIZE :- M14. Note: Due to the difference between different monitors, the pictures may not reflect the actual colour of the item. Finish :- zink Plated. CNC precision machined. Protective coated for corrosion resistance (Bright Zinc Plated).
Steel Metric Cone Spacer Heims Heim Joint Rod End Ends Joints - Material :- Steel. Note: Due to the difference between different monitors, the pictures may not reflect the actual colour of the item. Finish :- zink Plated. CNC precision machined. Protective coated for corrosion resistance (Bright Zinc Plated).
Cone Spacer Joint Rod End Ends Joints Washer Metric Mm Size M14 M16 M18 M20 - SIZE :- M14. SIZE :- M18. SIZE :- M16. SIZE :- M20. CNC precision machined. Protective coated for corrosion resistance (Bright Zinc Plated). (E) :- 11.3MM. Note: Due to the difference between different monitors, the pictures may not reflect the actual colour of the item.
Full Hex Threaded Insert 6.0mm Pack 50 Connect 35106 - Spark Plug Tools. Full-Hex Threaded Insert. Plain Collar with Full Hex Body. 6.0mm ID Thread. Heavy Duty. Direct Fit. Car Care > Tools > General Hand Tools. Open End Type.
Thin Sheet Threaded Insert 12mm Pk 50 Connect 32802 - Thin Sheet Threaded Inserts. Spark Plug Tools. Direct Fit. Glow Plugs. Manufacturer Part NumberConnect. Denso Spark Plugs. Champion Spark Plugs. 12.0mm ID Thread.
Half-Hex Threaded Insert 6.0mm Pk 50 Connect 32804 - Spark Plug Tools. Half-Hex Threaded Insert. Direct Fit. Open end type. Glow Plugs. Manufacturer Part NumberConnect. Denso Spark Plugs. Champion Spark Plugs.
Half-Hex Threaded Insert 4.0mm Pk 50 Connect 32803 - Spark Plug Tools. Half-Hex Threaded Insert. Direct Fit. Open end type. Glow Plugs. Manufacturer Part NumberConnect. Denso Spark Plugs. Champion Spark Plugs.
Thin Sheet Threaded Insert 4.0mm Pk 50 Connect 32798 - Thin Sheet Threaded Inserts. Spark Plug Tools. Direct Fit. Glow Plugs. Manufacturer Part NumberConnect. Denso Spark Plugs. Champion Spark Plugs. 4.0mm ID Thread.
Type 316 Stainless Steel Threaded Rod / Stainless All Thread (3 Foot Sections) - These are type 316 (Marine Grade) stainless steel bundles of threaded rod (also known as all thread). Superior Grade Type 316 Stainless Steel Threaded Rod. Type 316 stainless is superior in resisting rust & corrosion when compared to standard type 304/18-8 stainless.
National 3/8-16X1' Threaded Rod - Coarse threads. Zinc-plated steel finish for maximum rust protection. Designed for hanging, connecting, clamping, and supporting in plumbing, heating, and electrical applications and other DIY projects.
National 1/4-20X2' Threaded Rod - Coarse threads. Zinc-plated steel finish for maximum rust protection. Designed for hanging, connecting, clamping, and supporting in plumbing, heating, and electrical applications and other DIY projects.
1 Mtr Long SOLID BRASS Threaded Allthread STUDDING M3 M4 M5 M6 M8 M10 & M12 - Solid Brass Allthread Studding. Threaded rod is also known as studding, threaded bar and all thread. M3, M4, M5, M6, M8, M10 & M12. Threaded rod has a wide range of uses in the engineering, architectural and eletrical trades.
Mild Steel Threaded Metric Bar Thread Studding Rod Resin Anchor Stud Bright Zinc - Threaded Studding Threaded BAR / ROD ZINC PLATED-Sizes from M6 upto M16. ZINC Plated Steel Fully Threaded Rod / Threaded Bar. Mild Steel Zinc plated All-threaded Stud. All are fully plated with chamfered ends for easy assembly of nut and washers.
Fully Threaded Metric Bar Studding Rod Zinc Plated Nuts Washers M5 To M30 - Threaded Bar Studding Threaded BAR / ROD ZINC PLATED-Sizes from M5 upto M30. ZINC Plated Steel Fully Threaded Rod / Threaded Bar. You can also chooseFull Nuts, Wing Nuts, Nyloc Nuts or From A Washer from above if you need any of them with the threaded Rod.
Pure Molybdenum- Moly- Threaded Rod 1/4"-20 X 36" length - Grade: Molybdenum. Brazing fixtures & Boring bars. Semiconductor base plates. Heat shields. Sputtering targets for coating solar cells & flat screens. Hot Zones for high-temperature furnaces.
All Full Threaded Metric Bar Studding Rod Zinc Plated Nuts Washers M5 To M30 - Threaded Bar Studding Threaded BAR / ROD ZINC PLATED-Sizes from M5 upto M30. ZINC Plated Steel Fully Threaded Rod / Threaded Bar. You can also chooseFull Nuts, Wing Nuts, Nyloc Nuts or From A Washer and Vinyl Thread Cover Cap from above if you need any of them with the threaded Rod.
M1.0 M1.2 M1.4 M1.6 M2.0 Miniature Threaded Rod Pocher Upgrade - The M2.0 rod is also perfect for replacing the threaded rod in Pocher model kits. M1.0 1.0mm 125mm 0.25mm Brass. M1.2 1.2mm 125mm 0.25mm Brass. M1.4 1.4mm 125mm 0.30mm Brass. M1.6 1.6mm 125mm 0.35mm Brass.