100
22 Tooth Sprocket, Double Strand 1/4" Pitch 15mm Bore Carbon Steel with Keyway
£13.95 Buy It Now or Best Offer
25 Tooth Sprocket, Double Strand 1/4" Pitch 12mm Bore Carbon Steel
£16.87 Buy It Now or Best Offer
25 Tooth Sprocket, Double Strand 1/4" Pitch 14mm Bore Carbon Steel with Keyway
£16.63 Buy It Now or Best Offer
24 Tooth Sprocket, Double Strand 1/4" Pitch 12mm Bore Carbon Steel
£15.95 Buy It Now or Best Offer
25 Tooth Sprocket, Double Strand 1/4" Pitch 15mm Bore Carbon Steel with Keyway
£16.57 Buy It Now or Best Offer
22 Tooth Sprocket, Double Strand 1/4" Pitch 10mm Bore Carbon Steel
£14.47 Buy It Now or Best Offer
25 Tooth Sprocket, Double Strand 1/4" Pitch 10mm Bore Carbon Steel
£17.05 Buy It Now or Best Offer
20 Tooth Sprocket, Double Strand 1/4" Pitch 12mm Bore Carbon Steel
£12.72 Buy It Now or Best Offer
22 Tooth Sprocket, Double Strand 1/4" Pitch 14mm Bore Carbon Steel with Keyway
£14.02 Buy It Now or Best Offer
20 Tooth Sprocket, Double Strand 1/4" Pitch 14mm Bore Carbon Steel with Keyway
£12.50 Buy It Now or Best Offer
19 Tooth Sprocket, Double Strand 1/4" Pitch 14mm Bore Carbon Steel with Keyway
£11.77 Buy It Now or Best Offer
22 Tooth Sprocket, Double Strand 1/4" Pitch 12mm Bore Carbon Steel
£14.32 Buy It Now or Best Offer
25 Tooth Sprocket, Double Strand 1/4" Pitch 8mm Bore Carbon Steel
£17.23 Buy It Now or Best Offer
20 Tooth Sprocket, Double Strand 1/4" Pitch 8mm Bore Carbon Steel
£13.02 Buy It Now or Best Offer
20 Tooth Sprocket, Double Strand 1/4" Pitch 15mm Bore Carbon Steel with Keyway
£12.41 Buy It Now or Best Offer
18 Tooth Sprocket, Double Strand 1/4" Pitch 14mm Bore Carbon Steel with Keyway
£9.82 Buy It Now or Best Offer
20 Tooth Sprocket, Double Strand 1/4" Pitch 10mm Bore Carbon Steel
£12.83 Buy It Now or Best Offer
19 Tooth Sprocket, Double Strand 1/4" Pitch 12mm Bore Carbon Steel with Keyway
£11.86 Buy It Now or Best Offer
19 Tooth Sprocket, Double Strand 1/4" Pitch 12mm Bore Carbon Steel
£12.10 Buy It Now or Best Offer
20 Tooth Sprocket, Double Strand 1/4" Pitch 12mm Bore Carbon Steel with Keyway
£12.47 Buy It Now or Best Offer
19 Tooth Sprocket, Double Strand 1/4" Pitch 8mm Bore Carbon Steel
£12.31 Buy It Now or Best Offer
18 Tooth Sprocket, Double Strand 1/4" Pitch 12mm Bore Carbon Steel
£11.39 Buy It Now or Best Offer
19 Tooth Sprocket, Double Strand 1/4" Pitch 10mm Bore Carbon Steel
£12.25 Buy It Now or Best Offer
18 Tooth Sprocket, Double Strand 1/4" Pitch 12mm Bore Carbon Steel with Keyway
£9.93 Buy It Now or Best Offer
18 Tooth Sprocket, Double Strand 1/4" Pitch 8mm Bore Carbon Steel
£11.69 Buy It Now or Best Offer
18 Tooth Sprocket, Double Strand 1/4" Pitch 14mm Bore Carbon Steel
£10.00 Buy It Now or Best Offer
12 Tooth Sprocket, Double Strand 1/4" Pitch 8mm Bore Carbon Steel
£7.82 Buy It Now or Best Offer
18 Tooth Sprocket, Double Strand 1/4" Pitch 10mm Bore Carbon Steel
£11.54 Buy It Now or Best Offer
17 Tooth Sprocket, Double Strand 1/4" Pitch 14mm Bore Carbon Steel
£9.37 Buy It Now or Best Offer
15 Tooth Sprocket, Double Strand 1/4" Pitch 12mm Bore Carbon Steel
£8.64 Buy It Now or Best Offer
16 Tooth Sprocket, Double Strand 1/4" Pitch 12mm Bore Carbon Steel
£8.87 Buy It Now or Best Offer
16 Tooth Sprocket, Double Strand 1/4" Pitch 8mm Bore Carbon Steel
£9.24 Buy It Now or Best Offer
16 Tooth Sprocket, Double Strand 1/4" Pitch 10mm Bore Carbon Steel
£9.15 Buy It Now or Best Offer
14 Tooth Sprocket, Double Strand 1/4" Pitch 8mm Bore Carbon Steel
£8.54 Buy It Now or Best Offer
14 Tooth Sprocket, Double Strand 1/4" Pitch 8mm Bore Carbon Steel with Keyway
£9.72 Buy It Now or Best Offer
17 Tooth Sprocket, Double Strand 1/4" Pitch 12mm Bore Carbon Steel
£9.57 Buy It Now or Best Offer
14 Tooth Sprocket, Double Strand 1/4" Pitch 10mm Bore Carbon Steel
£8.43 Buy It Now or Best Offer
15 Tooth Sprocket, Double Strand 1/4" Pitch 10mm Bore Carbon Steel
£8.76 Buy It Now or Best Offer
13 Tooth Sprocket, Double Strand 1/4" Pitch 8mm Bore Carbon Steel
£8.14 Buy It Now or Best Offer
15 Tooth Sprocket, Double Strand 1/4" Pitch 8mm Bore Carbon Steel
£8.87 Buy It Now or Best Offer
BROWNING HB40A175/8 Idler Sprocket HB 40A17 5/8" #40 CHAIN 17 TOOTH 5/8" ID USA
£13.70 Buy It Now
Idler Sprocket, 12mm Bore 1/2" Pitch 13 Tooth, Carbon Steel with 2 Bearing
£17.20 Buy It Now or Best Offer
Idler Sprocket, 17mm Bore 1/2" Pitch 17 Tooth, Carbon Steel with 2 Bearing
£24.29 Buy It Now or Best Offer
Idler Sprocket, 10mm Bore 3/8" Pitch 19 Tooth, Carbon Steel with Bearing
£16.88 Buy It Now or Best Offer
Idler Sprocket 17mm Bore 1/2" Pitch 15 Tooth Carbon Steel with 2 Bearing
£20.54 Buy It Now or Best Offer
Idler Sprocket, 20mm Bore 1/2" Pitch 17 Tooth, Carbon Steel with Bearing
£18.58 Buy It Now or Best Offer
Idler Sprocket, 17mm Bore 1/2" Pitch 16 Tooth, Carbon Steel with Bearing
£17.30 Buy It Now or Best Offer
Idler Sprocket, 10mm Bore 1/2" Pitch 15 Tooth, Carbon Steel with Bearing
£16.20 Buy It Now or Best Offer
Idler Sprocket 12mm Bore 1/2" Pitch 15 Tooth Carbon Steel with 2 Bearing
£20.45 Buy It Now or Best Offer
Idler Sprocket, 12mm Bore 1/2" Pitch 13 Tooth, Carbon Steel with Bearing
£13.55 Buy It Now or Best Offer
Idler Sprocket, 17mm Bore 1/2" Pitch 17 Tooth, Carbon Steel with Bearing
£18.76 Buy It Now or Best Offer
Idler Sprocket 15mm Bore 1/2" Pitch 15 Tooth Carbon Steel with 2 Bearing
£19.92 Buy It Now or Best Offer
Idler Sprocket 10mm Bore 1/2" Pitch 15 Tooth Carbon Steel with 2 Bearing
£20.48 Buy It Now or Best Offer
Idler Sprocket, 10mm Bore 3/8" Pitch 18 Tooth, Carbon Steel with Bearing
£15.86 Buy It Now or Best Offer
Idler Sprocket 12mm Bore 3/8" Pitch 18 Tooth Carbon Steel with 2 Bearing
£19.75 Buy It Now or Best Offer
Idler Sprocket 10mm Bore 3/8" Pitch 15 Tooth Carbon Steel with 2 Bearing
£14.01 Buy It Now or Best Offer
Idler Sprocket, 18mm Bore 3/8" Pitch 18 Tooth, Carbon Steel with Bearing
£15.56 Buy It Now or Best Offer
Idler Sprocket 12mm Bore 1/2" Pitch 16 Tooth Carbon Steel with 2 Bearing
£21.69 Buy It Now or Best Offer
Idler Sprocket 10mm Bore 3/8" Pitch 19 Tooth Carbon Steel with 2 Bearing
£21.04 Buy It Now or Best Offer
Idler Sprocket, 16mm Bore 1/2" Pitch 16 Tooth, Carbon Steel with Bearing
£16.94 Buy It Now or Best Offer
Idler Sprocket, 9mm Bore 3/8" Pitch 15 Tooth, Carbon Steel with Bearing
£11.03 Buy It Now or Best Offer
Idler Sprocket, 10mm Bore 3/8" Pitch 15 Tooth, Carbon Steel with Bearing
£11.03 Buy It Now or Best Offer
Idler Sprocket, 15mm Bore 1/2" Pitch 15 Tooth, Carbon Steel with Bearing
£15.83 Buy It Now or Best Offer
Idler Sprocket 17mm Bore 1/2" Pitch 16 Tooth Carbon Steel with 2 Bearing
£21.96 Buy It Now or Best Offer
Idler Sprocket 16mm Bore 1/2" Pitch 16 Tooth Carbon Steel with 2 Bearing
£21.07 Buy It Now or Best Offer
Idler Sprocket 20mm Bore 1/2" Pitch 17 Tooth Carbon Steel with 2 Bearing
£24.27 Buy It Now or Best Offer
Idler Sprocket 19mm Bore 3/8" Pitch 19 Tooth Carbon Steel with 2 Bearing
£20.82 Buy It Now or Best Offer
Idler Sprocket 10mm Bore 1/2" Pitch 16 Tooth Carbon Steel with 2 Bearing
£21.63 Buy It Now or Best Offer
Idler Sprocket 12mm Bore 1/2" Pitch 14 Tooth Carbon Steel with 2 Bearing
£18.71 Buy It Now or Best Offer
Idler Sprocket 10mm Bore 3/8" Pitch 18 Tooth Carbon Steel with 2 Bearing
£19.80 Buy It Now or Best Offer
Idler Sprocket, 10mm Bore 1/2" Pitch 16 Tooth, Carbon Steel with Bearing
£16.91 Buy It Now or Best Offer
Idler Sprocket, 19mm Bore 3/8" Pitch 19 Tooth, Carbon Steel with Bearing
£16.30 Buy It Now or Best Offer
Idler Sprocket 12mm Bore 3/8" Pitch 17 Tooth Carbon Steel with 2 Bearing
£18.29 Buy It Now or Best Offer
Idler Sprocket 12mm Bore 3/8" Pitch 19 Tooth Carbon Steel with 2 Bearing
£20.82 Buy It Now or Best Offer
Idler Sprocket, 12mm Bore 1/2" Pitch 15 Tooth, Carbon Steel with Bearing
£16.44 Buy It Now or Best Offer
Idler Sprocket, 12mm Bore 1/2" Pitch 16 Tooth, Carbon Steel with Bearing
£17.03 Buy It Now or Best Offer
Idler Sprocket, 12mm Bore 1/2" Pitch 14 Tooth, Carbon Steel with Bearing
£15.80 Buy It Now or Best Offer
Idler Sprocket, 12mm Bore 3/8" Pitch 17 Tooth, Carbon Steel with Bearing
£14.47 Buy It Now or Best Offer
Idler Sprocket, 9mm Bore 3/8" Pitch 15 Tooth, Carbon Steel with 2 Bearing
£14.04 Buy It Now or Best Offer
Idler Sprocket, 12mm Bore 3/8" Pitch 18 Tooth, Carbon Steel with Bearing
£15.98 Buy It Now or Best Offer
Idler Sprocket 18mm Bore 3/8" Pitch 18 Tooth Carbon Steel with 2 Bearing
£19.33 Buy It Now or Best Offer
Idler Sprocket, 12mm Bore 3/8" Pitch 19 Tooth, Carbon Steel with Bearing
£16.64 Buy It Now or Best Offer
Idler Sprocket, 12mm Bore 3/8" Pitch 16 Tooth, Carbon Steel with Bearing
£13.65 Buy It Now or Best Offer
19 Teeth Sprocket Single Strand 1/2" Pitch, 12mm Bore Carbon Steel
£21.46 Buy It Now or Best Offer
50 Teeth Sprocket Type B Double Strand 3/8" Pitch, 20mm Bore A3 Carbon Steel
£77.95 Buy It Now or Best Offer
72 Teeth Sprocket Single Strand 3/8" Pitch, 18mm Bore Carbon Steel
£91.40 Buy It Now or Best Offer
57 Teeth Sprocket Single Strand 5/8" Pitch, 23mm Bore Carbon Steel
£147.13 Buy It Now or Best Offer
32 Teeth Sprocket Type B Double Strand 3/8" Pitch, 14mm Bore A3 Carbon Steel
£34.77 Buy It Now or Best Offer
30 Teeth Sprocket Type B Double Strand 3/8" Pitch, 12mm Bore A3 Carbon Steel
£31.07 Buy It Now or Best Offer
45 Teeth Sprocket Type B Double Strand 3/8" Pitch, 16mm Bore A3 Carbon Steel
£66.22 Buy It Now or Best Offer
38 Teeth Sprocket Type B Double Strand 3/8" Pitch, 16mm Bore A3 Carbon Steel
£44.69 Buy It Now or Best Offer
20 Teeth Sprocket Type B Double Strand 3/8" Pitch, 10mm Bore A3 Carbon Steel
£17.66 Buy It Now or Best Offer
22 Teeth Sprocket Type B Double Strand 3/8" Pitch, 12mm Bore A3 Carbon Steel
£20.00 Buy It Now or Best Offer
40 Teeth Sprocket Type B Double Strand 3/8" Pitch, 16mm Bore A3 Carbon Steel
£54.09 Buy It Now or Best Offer
19 Teeth Sprocket Type B Double Strand 3/8" Pitch, 10mm Bore A3 Carbon Steel
£16.56 Buy It Now or Best Offer
23 Teeth Sprocket Type B Double Strand 3/8" Pitch, 12mm Bore A3 Carbon Steel
£21.33 Buy It Now or Best Offer
34 Teeth Sprocket Type B Double Strand 3/8" Pitch, 14mm Bore A3 Carbon Steel
£37.74 Buy It Now or Best Offer
26 Teeth Sprocket Type B Double Strand 3/8" Pitch, 12mm Bore A3 Carbon Steel
£26.58 Buy It Now or Best Offer
14 Teeth Sprocket Type B Double Strand 3/8" Pitch, 10mm Bore A3 Carbon Steel
£9.91 Buy It Now or Best Offer
13 Teeth Sprocket Type B Double Strand 3/8" Pitch, 10mm Bore A3 Carbon Steel
£9.15 Buy It Now or Best Offer
- 35 Teeth Sprocket Type B Double Strand 3/8" Pitch, 14mm Bore A3 Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. Double strand sprocket with two sets of teeth for use with double strand chains, which have a higher stability and can support greater loads than single strand chains.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 35Outside Diameter: 109mm / 4.29-inchBump Width: 12.5mm / 0.49-inchTotal Width: 28mm / 1.1-inchBore Diameter: 14mm / 0.55-inchPitch: 3/8-inch / 9.
- 36 Teeth Sprocket Type B Double Strand 3/8" Pitch, 14mm Bore A3 Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. Double strand sprocket with two sets of teeth for use with double strand chains, which have a higher stability and can support greater loads than single strand chains.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 36Outside Diameter: 112mm / 4.41-inchBump Width: 12.5mm / 0.49-inchTotal Width: 28mm / 1.1-inchBore Diameter: 14mm / 0.55-inchPitch: 3/8-inch / 9.
- 16 Teeth Sprocket Type B Double Strand 3/8" Pitch, 10mm Bore A3 Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. Double strand sprocket with two sets of teeth for use with double strand chains, which have a higher stability and can support greater loads than single strand chains.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 16Outside Diameter: 52mm / 2.05-inchBump Width: 12.5mm / 0.49-inchTotal Width: 28mm / 1.1-inchBore Diameter: 10mm / 0.39-inchPitch: 3/8-inch / 9.
- 48 Teeth Sprocket Type B Double Strand 3/8" Pitch, 16mm Bore A3 Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. Double strand sprocket with two sets of teeth for use with double strand chains, which have a higher stability and can support greater loads than single strand chains.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 48Outside Diameter: 148mm / 5.83-inchBump Width: 19.5mm / 0.77-inchTotal Width: 35mm / 1.38-inchBore Diameter: 16mm / 0.63-inchPitch: 3/8-inch / 9.
- 15 Teeth Sprocket Type B Double Strand 3/8" Pitch, 10mm Bore A3 Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. Double strand sprocket with two sets of teeth for use with double strand chains, which have a higher stability and can support greater loads than single strand chains.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 15Outside Diameter: 49mm / 1.93-inchBump Width: 8.5mm / 0.33-inchTotal Width: 24mm / 0.94-inchBore Diameter: 10mm / 0.39-inchPitch: 3/8-inch / 9.
- 42 Teeth Sprocket Type B Double Strand 3/8" Pitch, 16mm Bore A3 Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. Double strand sprocket with two sets of teeth for use with double strand chains, which have a higher stability and can support greater loads than single strand chains.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 42Outside Diameter: 130mm / 5.12-inchBump Width: 19.5mm / 0.77-inchTotal Width: 35mm / 1.38-inchBore Diameter: 16mm / 0.63-inchPitch: 3/8-inch / 9.
- 18 Teeth Sprocket Type B Double Strand 3/8" Pitch, 10mm Bore A3 Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. Double strand sprocket with two sets of teeth for use with double strand chains, which have a higher stability and can support greater loads than single strand chains.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 18Outside Diameter: 58mm / 2.28-inchBump Width: 12.5mm / 0.49-inchTotal Width: 28mm / 1.1-inchBore Diameter: 10mm / 0.39-inchPitch: 3/8-inch / 9.
- 17 Teeth Sprocket Type B Double Strand 3/8" Pitch, 10mm Bore A3 Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. Double strand sprocket with two sets of teeth for use with double strand chains, which have a higher stability and can support greater loads than single strand chains.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 17Outside Diameter: 55mm / 2.17-inchBump Width: 12.5mm / 0.49-inchTotal Width: 28mm / 1.1-inchBore Diameter: 10mm / 0.39-inchPitch: 3/8-inch / 9.
- 28 Teeth Sprocket Type B Double Strand 3/8" Pitch, 12mm Bore A3 Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. Double strand sprocket with two sets of teeth for use with double strand chains, which have a higher stability and can support greater loads than single strand chains.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 28Outside Diameter: 88mm / 3.46-inchBump Width: 12.5mm / 0.49-inchTotal Width: 28mm / 1.1-inchBore Diameter: 12mm / 0.47-inchPitch: 3/8-inch / 9.
- 10 Teeth Sprocket Type B Double Strand 3/8" Pitch, 8mm Bore A3 Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. Double strand sprocket with two sets of teeth for use with double strand chains, which have a higher stability and can support greater loads than single strand chains.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 10Outside Diameter: 34mm / 1.34-inchBump Width: 8.5mm / 0.33-inchTotal Width: 24mm / 0.94-inchBore Diameter: 8mm / 0.31-inchPitch: 3/8-inch / 9.
- 21 Teeth Sprocket Type B Double Strand 3/8" Pitch, 12mm Bore A3 Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. Double strand sprocket with two sets of teeth for use with double strand chains, which have a higher stability and can support greater loads than single strand chains.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 21Outside Diameter: 67mm / 2.64-inchBump Width: 12.5mm / 0.49-inchTotal Width: 28mm / 1.1-inchBore Diameter: 12mm / 0.47-inchPitch: 3/8-inch / 9.
- 27 Teeth Sprocket Type B Double Strand 3/8" Pitch, 12mm Bore A3 Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. Double strand sprocket with two sets of teeth for use with double strand chains, which have a higher stability and can support greater loads than single strand chains.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 27Outside Diameter: 85mm / 3.35-inchBump Width: 12.5mm / 0.49-inchTotal Width: 28mm / 1.1-inchBore Diameter: 12mm / 0.47-inchPitch: 3/8-inch / 9.
- 24 Teeth Sprocket Type B Double Strand 3/8" Pitch, 12mm Bore A3 Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. Double strand sprocket with two sets of teeth for use with double strand chains, which have a higher stability and can support greater loads than single strand chains.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 24Outside Diameter: 76mm / 2.99-inchBump Width: 12.5mm / 0.49-inchTotal Width: 28mm / 1.1-inchBore Diameter: 12mm / 0.47-inchPitch: 3/8-inch / 9.
- 25 Teeth Sprocket Type B Double Strand 3/8" Pitch, 12mm Bore A3 Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. Double strand sprocket with two sets of teeth for use with double strand chains, which have a higher stability and can support greater loads than single strand chains.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 25Outside Diameter: 79mm / 3.11-inchBump Width: 12.5mm / 0.49-inchTotal Width: 28mm / 1.1-inchBore Diameter: 12mm / 0.47-inchPitch: 3/8-inch / 9.
- 11 Teeth Sprocket Type B Double Strand 3/8" Pitch, 8mm Bore A3 Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. Double strand sprocket with two sets of teeth for use with double strand chains, which have a higher stability and can support greater loads than single strand chains.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 11Outside Diameter: 37mm / 1.46-inchBump Width: 8.5mm / 0.33-inchTotal Width: 24mm / 0.94-inchBore Diameter: 8mm / 0.31-inchPitch: 3/8-inch / 9.
- 12 Teeth Sprocket Type B Double Strand 3/8" Pitch, 8mm Bore A3 Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. Double strand sprocket with two sets of teeth for use with double strand chains, which have a higher stability and can support greater loads than single strand chains.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 12Outside Diameter: 40mm / 1.57-inchBump Width: 8.5mm / 0.33-inchTotal Width: 24mm / 0.94-inchBore Diameter: 8mm / 0.31-inchPitch: 3/8-inch / 9.
- 50 Teeth Sprocket Single Strand 1/2" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 54 Teeth Sprocket Single Strand 1/2" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 38 Teeth Sprocket Single Strand 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 34 Teeth Sprocket Single Strand 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 40 Teeth Sprocket Single Strand 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 27 Teeth Sprocket Single Strand 1/2" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 32 Teeth Sprocket Single Strand 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 12 Teeth Sprocket Single Strand 1/2" Pitch, 10mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 15 Teeth Sprocket Single Strand 1/2" Pitch, 10mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 58 Teeth Sprocket Single Strand 1/2" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 52 Teeth Sprocket Single Strand 1/2" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 39 Teeth Sprocket Single Strand 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 46 Teeth Sprocket Single Strand 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 47 Teeth Sprocket Single Strand 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 36 Teeth Sprocket Single Strand 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 33 Teeth Sprocket Single Strand 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 42 Teeth Sprocket Single Strand 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 37 Teeth Sprocket Single Strand 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 20 Teeth Sprocket Single Strand 1/2" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 24 Teeth Sprocket Single Strand 1/2" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 30 Teeth Sprocket Single Strand 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 9 Teeth Sprocket Single Strand 1/2" Pitch, 10mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 60 Teeth Sprocket Single Strand 1/2" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 56 Teeth Sprocket Single Strand 1/2" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 53 Teeth Sprocket Single Strand 1/2" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 49 Teeth Sprocket Single Strand 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 51 Teeth Sprocket Single Strand 1/2" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 48 Teeth Sprocket Single Strand 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 23 Teeth Sprocket Single Strand 1/2" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 22 Teeth Sprocket Single Strand 1/2" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 25 Teeth Sprocket Single Strand 1/2" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 14 Teeth Sprocket Single Strand 1/2" Pitch, 10mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 35 Teeth Sprocket Single Strand 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 13 Teeth Sprocket Single Strand 1/2" Pitch, 10mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 11 Teeth Sprocket Single Strand 1/2" Pitch, 10mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 10 Teeth Sprocket Single Strand 1/2" Pitch, 10mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 57 Teeth Sprocket Single Strand 1/2" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 55 Teeth Sprocket Single Strand 1/2" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 28 Teeth Sprocket Single Strand 1/2" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 44 Teeth Sprocket Single Strand 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 45 Teeth Sprocket Single Strand 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 43 Teeth Sprocket Single Strand 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 26 Teeth Sprocket Single Strand 1/2" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 29 Teeth Sprocket Single Strand 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 16 Teeth Sprocket Single Strand 1/2" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 31 Teeth Sprocket Single Strand 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 18 Teeth Sprocket Single Strand 1/2" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 21 Teeth Sprocket Single Strand 1/2" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 55 Teeth Sprocket Single Strand 5/8" Pitch, 25mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 47 Teeth Sprocket Single Strand 5/8" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 56 Teeth Sprocket Single Strand 5/8" Pitch, 25mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 35 Teeth Sprocket Single Strand 5/8" Pitch, 18mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 60 Teeth Sprocket Single Strand 5/8" Pitch, 25mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 19 Teeth Sprocket Single Strand 5/8" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 45 Teeth Sprocket Single Strand 5/8" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 33 Teeth Sprocket Single Strand 5/8" Pitch, 18mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 34 Teeth Sprocket Single Strand 5/8" Pitch, 18mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 58 Teeth Sprocket Single Strand 5/8" Pitch, 25mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 17 Teeth Sprocket Single Strand 5/8" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 41 Teeth Sprocket Single Strand 5/8" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 50 Teeth Sprocket Single Strand 5/8" Pitch, 26mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 15 Teeth Sprocket Single Strand 5/8" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 27 Teeth Sprocket Single Strand 5/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 13 Teeth Sprocket Single Strand 5/8" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 16 Teeth Sprocket Single Strand 5/8" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 36 Teeth Sprocket Single Strand 5/8" Pitch, 18mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 54 Teeth Sprocket Single Strand 5/8" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 49 Teeth Sprocket Single Strand 5/8" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 24 Teeth Sprocket Single Strand 5/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 25 Teeth Sprocket Single Strand 5/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 10 Teeth Sprocket Single Strand 5/8" Pitch, 10mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 12 Teeth Sprocket Single Strand 5/8" Pitch, 10mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 21 Teeth Sprocket Single Strand 5/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 14 Teeth Sprocket Single Strand 5/8" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 37 Teeth Sprocket Single Strand 5/8" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 11 Teeth Sprocket Single Strand 5/8" Pitch, 10mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 18 Teeth Sprocket Single Strand 5/8" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 38 Teeth Sprocket Single Strand 5/8" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 43 Teeth Sprocket Single Strand 5/8" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 22 Teeth Sprocket Single Strand 5/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 46 Teeth Sprocket Single Strand 5/8" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 52 Teeth Sprocket Single Strand 5/8" Pitch, 25mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 48 Teeth Sprocket Single Strand 5/8" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 44 Teeth Sprocket Single Strand 5/8" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 30 Teeth Sprocket Single Strand 5/8" Pitch, 18mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 42 Teeth Sprocket Single Strand 5/8" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 29 Teeth Sprocket Single Strand 5/8" Pitch, 18mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 53 Teeth Sprocket Single Strand 5/8" Pitch, 25mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 39 Teeth Sprocket Single Strand 5/8" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 51 Teeth Sprocket Single Strand 5/8" Pitch, 25mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 23 Teeth Sprocket Single Strand 5/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 32 Teeth Sprocket Single Strand 5/8" Pitch, 18mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 31 Teeth Sprocket Single Strand 5/8" Pitch, 18mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 28 Teeth Sprocket Single Strand 5/8" Pitch, 18mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 26 Teeth Sprocket Single Strand 5/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 40 Teeth Sprocket Single Strand 5/8" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 20 Teeth Sprocket Single Strand 5/8" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 58 Teeth Sprocket Single Strand 3/8" Pitch, 18mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 58Outside Diameter: 180mm / 7.
- 49 Teeth Sprocket Single Strand 3/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 49Outside Diameter: 148mm / 5.
- 70 Teeth Sprocket Single Strand 3/8" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 70Outside Diameter: 215mm / 8.
- 22 Teeth Sprocket Single Strand 3/8" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 22Outside Diameter: 70mm / 2.
- 60 Teeth Sprocket Single Strand 3/8" Pitch, 18mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 60Outside Diameter: 185mm / 7.
- 47 Teeth Sprocket Single Strand 3/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 47Outside Diameter: 145mm / 5.
- 50 Teeth Sprocket Single Strand 3/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 50Outside Diameter: 155mm / 6.
- 25 Teeth Sprocket Single Strand 3/8" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 25Outside Diameter: 725mm / 3.
- 43 Teeth Sprocket Single Strand 3/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 43Outside Diameter: 133mm / 5.
- 55 Teeth Sprocket Single Strand 3/8" Pitch, 18mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 55Outside Diameter: 170mm / 6.
- 57 Teeth Sprocket Single Strand 3/8" Pitch, 18mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 57Outside Diameter: 175mm / 6.
- 31 Teeth Sprocket Single Strand 3/8" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 31Outside Diameter: 317mm / 3.
- 20 Teeth Sprocket Single Strand 3/8" Pitch, 10mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 20Outside Diameter: 64mm / 2.
- 51 Teeth Sprocket Single Strand 3/8" Pitch, 18mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 51Outside Diameter: 154mm / 6.
- 12 Teeth Sprocket Single Strand 3/8" Pitch, 8mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 12Outside Diameter: 39mm / 1.
- 24 Teeth Sprocket Single Strand 3/8" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 24Outside Diameter: 76mm / 2.
- 19 Teeth Sprocket Single Strand 3/8" Pitch, 10mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 19Outside Diameter: 61mm / 2.
- 39 Teeth Sprocket Single Strand 3/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 39Outside Diameter: 120mm / 4.
- 40 Teeth Sprocket Single Strand 3/8" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 40Outside Diameter: 125mm / 4.
- 46 Teeth Sprocket Single Strand 3/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 46Outside Diameter: 142mm / 5.
- 26 Teeth Sprocket Single Strand 3/8" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 26Outside Diameter: 82mm / 3.
- 15 Teeth Sprocket Single Strand 3/8" Pitch, 10mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 15Outside Diameter: 48mm / 1.
- 33 Teeth Sprocket Single Strand 3/8" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 33Outside Diameter: 103mm / 4.
- 17 Teeth Sprocket Single Strand 3/8" Pitch, 10mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 17Outside Diameter: 55mm / 2.
- 18 Teeth Sprocket Single Strand 3/8" Pitch, 10mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 18Outside Diameter: 58mm / 2.
- 48 Teeth Sprocket Single Strand 3/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 48Outside Diameter: 150mm / 5.
- 65 Teeth Sprocket Single Strand 3/8" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 65Outside Diameter: 200mm / 7.
- 41 Teeth Sprocket Single Strand 3/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 41Outside Diameter: 125mm / 4.
- 52 Teeth Sprocket Single Strand 3/8" Pitch, 18mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 52Outside Diameter: 157mm / 6.
- 53 Teeth Sprocket Single Strand 3/8" Pitch, 18mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 53Outside Diameter: 160mm / 6.
- 38 Teeth Sprocket Single Strand 3/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 38Outside Diameter: 118mm / 4.
- 42 Teeth Sprocket Single Strand 3/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 42Outside Diameter: 130mm / 5.
- 37 Teeth Sprocket Single Strand 3/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 37Outside Diameter: 115mm / 4.
- 30 Teeth Sprocket Single Strand 3/8" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 30Outside Diameter: 304mm / 3.
- 45 Teeth Sprocket Single Strand 3/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 45Outside Diameter: 140mm / 5.
- 29 Teeth Sprocket Single Strand 3/8" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 29Outside Diameter: 291mm / 3.
- 27 Teeth Sprocket Single Strand 3/8" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 27Outside Diameter: 85mm / 3.
- 21 Teeth Sprocket Single Strand 3/8" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 21Outside Diameter: 67mm / 2.
- 54 Teeth Sprocket Single Strand 3/8" Pitch, 18mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 54Outside Diameter: 163mm / 6.
- 44 Teeth Sprocket Single Strand 3/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 44Outside Diameter: 135mm / 5.
- 23 Teeth Sprocket Single Strand 3/8" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 23Outside Diameter: 73mm / 2.
- 36 Teeth Sprocket Single Strand 3/8" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 36Outside Diameter: 112mm / 4.
- 13 Teeth Sprocket Single Strand 3/8" Pitch, 10mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 13Outside Diameter: 42mm / 1.
- 34 Teeth Sprocket Single Strand 3/8" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 34Outside Diameter: 105mm / 4.
- 9 Teeth Sprocket Single Strand 3/8" Pitch, 8mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 9Outside Diameter: 30mm / 1.
- 35 Teeth Sprocket Single Strand 3/8" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 35Outside Diameter: 109mm / 4.
- 14 Teeth Sprocket Single Strand 3/8" Pitch, 10mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 14Outside Diameter: 45mm / 1.
- 32 Teeth Sprocket Single Strand 3/8" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 32Outside Diameter: 100mm / 3.
- 28 Teeth Sprocket Single Strand 3/8" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 28Outside Diameter: 88mm / 3.
- 16 Teeth Sprocket Single Strand 3/8" Pitch, 10mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 16Outside Diameter: 52mm / 2.
- 11 Teeth Sprocket Single Strand 3/8" Pitch, 8mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 11Outside Diameter: 36mm / 1.
- 10 Teeth Sprocket Single Strand 3/8" Pitch, 8mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This sprocket has a hub extension on one side to provide stability. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.Specifications:Material: A3 carbon steelNumber of Teeth: 10Outside Diameter: 33mm / 1.
- 45 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 37 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- Idler Sprocket, 7mm Bore 1/2" Pitch 12 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 8mm Bore 1/2" Pitch 12 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 12mm Bore 1/2" Pitch 13 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 20mm Bore 1/2" Pitch 21 Tooth, Carbon Steel w 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 6mm Bore 1/2" Pitch 19 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 17mm Bore 1/2" Pitch 19 Tooth, Carbon Steel w 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 15mm Bore 1/2" Pitch 15 Tooth, Carbon Steel w 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 25mm Bore 1/2" Pitch 21 Tooth, Carbon Steel w 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 17mm Bore 1/2" Pitch 18 Tooth, Carbon Steel w 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 17mm Bore 1/2" Pitch 16 Tooth, Carbon Steel w 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 20mm Bore 1/2" Pitch 19 Tooth, Carbon Steel w 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 20mm Bore 1/2" Pitch 17 Tooth, Carbon Steel w 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 25mm Bore 1/2" Pitch 20 Tooth, Carbon Steel w 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 17mm Bore 1/2" Pitch 15 Tooth, Carbon Steel w 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 12mm Bore 1/2" Pitch 16 Tooth, Carbon Steel w 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 25mm Bore 1/2" Pitch 19 Tooth, Carbon Steel w 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 10mm Bore 1/2" Pitch 13 Tooth, Carbon Steel w 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 17mm Bore 1/2" Pitch 17 Tooth, Carbon Steel w 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 10mm Bore 1/2" Pitch 15 Tooth, Carbon Steel w 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 15mm Bore 1/2" Pitch 16 Tooth, Carbon Steel w 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 8mm Bore 1/2" Pitch 12 Tooth, Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 12mm Bore 1/2" Pitch 14 Tooth, Carbon Steel w 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 20mm Bore 1/2" Pitch 18 Tooth, Carbon Steel w 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 12mm Bore 1/2" Pitch 15 Tooth, Carbon Steel w 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 12mm Bore 1/2" Pitch 13 Tooth, Carbon Steel w 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 7mm Bore 1/2" Pitch 12 Tooth, Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 20mm Bore 1/2" Pitch 16 Tooth, Carbon Steel w 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 17mm Bore 1/2" Pitch 19 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 17mm Bore 1/2" Pitch 20 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 25mm Bore 1/2" Pitch 21 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 10mm Bore 1/2" Pitch 16 Tooth, Carbon Steel w 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 20mm Bore 1/2" Pitch 21 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 6mm Bore 1/2" Pitch 12 Tooth, Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 20mm Bore 1/2" Pitch 20 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 25mm Bore 1/2" Pitch 19 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 17mm Bore 1/2" Pitch 18 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 9mm Bore 1/2" Pitch 13 Tooth, Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 20mm Bore 1/2" Pitch 17 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 20mm Bore 1/2" Pitch 19 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 25mm Bore 1/2" Pitch 20 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 17mm Bore 1/2" Pitch 16 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 15mm Bore 1/2" Pitch 15 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 17mm Bore 1/2" Pitch 17 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 20mm Bore 1/2" Pitch 18 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 17mm Bore 1/2" Pitch 15 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 20mm Bore 1/2" Pitch 16 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 10mm Bore 1/2" Pitch 16 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 15mm Bore 1/2" Pitch 16 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 12mm Bore 1/2" Pitch 14 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 12mm Bore 1/2" Pitch 16 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 10mm Bore 1/2" Pitch 13 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 9mm Bore 1/2" Pitch 13 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 12mm Bore 1/2" Pitch 15 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 10mm Bore 1/2" Pitch 15 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- 25 Teeth Sprocket 1/4" Pitch, 8 x 7mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. D inner hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 25 Teeth Sprocket 1/4" Pitch, 18mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 25 Teeth Sprocket 1/4" Pitch, 17mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 25 Teeth Sprocket 1/4" Pitch, 12.7mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 25 Teeth Sprocket 1/4" Pitch, 15mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 25 Teeth Sprocket 1/4" Pitch, 14mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 25 Teeth Sprocket 1/4" Pitch, 10 x 9mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. D inner hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 25 Teeth Sprocket 1/4" Pitch, 20mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 25 Teeth Sprocket 1/4" Pitch, 16mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 25 Teeth Sprocket 1/4" Pitch, 19mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 25 Teeth Sprocket 1/4" Pitch, 8 x 7.5mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. D inner hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 25 Teeth Sprocket 1/4" Pitch, 12mm Bore Carbon Steel, Keyway with Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 25 Teeth Sprocket 1/4" Pitch, 19mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 25 Teeth Sprocket 1/4" Pitch, 12mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 25 Teeth Sprocket 1/4" Pitch, 12.7mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 25 Teeth Sprocket 1/4" Pitch, 10mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 25 Teeth Sprocket 1/4" Pitch, 16mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 25 Teeth Sprocket 1/4" Pitch, 20mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 25 Teeth Sprocket 1/4" Pitch, 18mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 25 Teeth Sprocket 1/4" Pitch, 15mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 25 Teeth Sprocket 1/4" Pitch, 14mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 25 Teeth Sprocket 1/4" Pitch, 17mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 25 Teeth Sprocket 1/4" Pitch, 8mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 24 Teeth Sprocket 1/4" Pitch, 10 x 9mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. D inner hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 24 Teeth Sprocket 1/4" Pitch, 8 x 7.5mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. D inner hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 25 Teeth Sprocket 1/4" Pitch, 6mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 24 Teeth Sprocket 1/4" Pitch, 8 x 7mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. D inner hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 25 Teeth Sprocket 1/4" Pitch, 10mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 24 Teeth Sprocket 1/4" Pitch, 20mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 21 Teeth Sprocket 1/4" Pitch, 8mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 24 Teeth Sprocket 1/4" Pitch, 17mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 24 Teeth Sprocket 1/4" Pitch, 19mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 24 Teeth Sprocket 1/4" Pitch, 10mm Bore Carbon Steel, Keyway with Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 24 Teeth Sprocket 1/4" Pitch, 10mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 24 Teeth Sprocket 1/4" Pitch, 12mm Bore Carbon Steel, Keyway with Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 24 Teeth Sprocket 1/4" Pitch, 16mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 24 Teeth Sprocket 1/4" Pitch, 16mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 24 Teeth Sprocket 1/4" Pitch, 12mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 24 Teeth Sprocket 1/4" Pitch, 14mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 24 Teeth Sprocket 1/4" Pitch, 15mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 24 Teeth Sprocket 1/4" Pitch, 12.7mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 23 Teeth Sprocket 1/4" Pitch, 12mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 24 Teeth Sprocket 1/4" Pitch, 18mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 24 Teeth Sprocket 1/4" Pitch, 6mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 24 Teeth Sprocket 1/4" Pitch, 14mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 24 Teeth Sprocket 1/4" Pitch, 10mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 24 Teeth Sprocket 1/4" Pitch, 15mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 23 Teeth Sprocket 1/4" Pitch, 8mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 22 Teeth Sprocket 1/4" Pitch, 14mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 22 Teeth Sprocket 1/4" Pitch, 16mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 23 Teeth Sprocket 1/4" Pitch, 17mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 21 Teeth Sprocket 1/4" Pitch, 16mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 23 Teeth Sprocket 1/4" Pitch, 16mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 22 Teeth Sprocket 1/4" Pitch, 17mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 24 Teeth Sprocket 1/4" Pitch, 8mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 23 Teeth Sprocket 1/4" Pitch, 14mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 22 Teeth Sprocket 1/4" Pitch, 12mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 21 Teeth Sprocket 1/4" Pitch, 15mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 24 Teeth Sprocket 1/4" Pitch, 12mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 22 Teeth Sprocket 1/4" Pitch, 8mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 21 Teeth Sprocket 1/4" Pitch, 15mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 22 Teeth Sprocket 1/4" Pitch, 10mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 23 Teeth Sprocket 1/4" Pitch, 10mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 23 Teeth Sprocket 1/4" Pitch, 15mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 21 Teeth Sprocket 1/4" Pitch, 10mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 22 Teeth Sprocket 1/4" Pitch, 15mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 21 Teeth Sprocket 1/4" Pitch, 12mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 21 Teeth Sprocket 1/4" Pitch, 14mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 21 Teeth Sprocket 1/4" Pitch, 17mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 59 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 56 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 42 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 48 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 52 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 44 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 36 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 53 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 39 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 32 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 35 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 38 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 29 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 30 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 14 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 10mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 24 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 18 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 15 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 10mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 17 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 10 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 6mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 22 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 57 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 55 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 58 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 49 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 54 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 51 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 46 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 37 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 47 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 43 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 41 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 34 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 28 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 23 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 26 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 27 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 33 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 25 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 20 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 13 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 10mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 21 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 11 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 10mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 19 Teeth Flat Chain Sprocket Type A 3/8" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of C45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in industrial transmission and transportation. The inner hole can be processed to meet the needs of different shafts. There is an error of ±2mm in the inner hole, please pay attention before purchasing.
- 56 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 45 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 53 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 49 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 51 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 39 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 38 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 25 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 30 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 27 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 23 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 28 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 26 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 58 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 22 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 15 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 10mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 52 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 55 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 16 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 11 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 10mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 47 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 17 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 12 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 57 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 44 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 54 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 50 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 20mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 33 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 35 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 43 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 41 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 42 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 48 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 36 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 31 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 29 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 40 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 24 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 32 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 34 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 16mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 20 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 14mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 19 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 13 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 10mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 18 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 12mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- 10 Teeth Flat Chain Sprocket Type A 1/2" Pitch, 10mm Bore Carbon Steel - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. This type A chain sprocket has no hub extension either side. Suitable for short shaft fixing.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of A3 carbon steel. High-frequency quenching treatment of teeth, the surface hardness, wear resistance are significantly improved. The part without quenching retains the original toughness and is easy to further process. It can be processed into different inner diameter sizes according to the requirements of use.4.
- Idler Sprocket, 7mm Bore 3/8" Pitch 13 Tooth, Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket 10mm Bore 1/4" Pitch 19 Tooth, Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 6mm Bore 3/8" Pitch 13 Tooth, Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 8mm Bore 3/8" Pitch 13 Tooth, Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 20 Teeth Sprocket 1/4" Pitch, 17mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 16 Teeth Sprocket 1/4" Pitch, 14mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 16 Teeth Sprocket 1/4" Pitch, 12mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 20 Teeth Sprocket 1/4" Pitch, 16mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 16 Teeth Sprocket 1/4" Pitch, 6.35mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 20 Teeth Sprocket 1/4" Pitch, 14mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 20 Teeth Sprocket 1/4" Pitch, 19mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 20 Teeth Sprocket 1/4" Pitch, 20mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 20 Teeth Sprocket 1/4" Pitch, 8 x 7.5mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. D inner hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 20 Teeth Sprocket 1/4" Pitch, 10mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 20 Teeth Sprocket 1/4" Pitch, 18mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 20 Teeth Sprocket 1/4" Pitch, 15mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 20 Teeth Sprocket 1/4" Pitch, 17mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 20 Teeth Sprocket 1/4" Pitch, 12.7mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 20 Teeth Sprocket 1/4" Pitch, 10mm Bore Carbon Steel, Keyway with Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 20 Teeth Sprocket 1/4" Pitch, 12mm Bore Carbon Steel, Keyway with Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 20 Teeth Sprocket 1/4" Pitch, 10 x 9mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. D inner hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 20 Teeth Sprocket 1/4" Pitch, 12mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 18 Teeth Sprocket 1/4" Pitch, 14mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 20 Teeth Sprocket 1/4" Pitch, 8 x 7mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. D inner hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 20 Teeth Sprocket 1/4" Pitch, 8mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 20 Teeth Sprocket 1/4" Pitch, 14mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 20 Teeth Sprocket 1/4" Pitch, 18mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 20 Teeth Sprocket 1/4" Pitch, 5mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 20 Teeth Sprocket 1/4" Pitch, 16mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 20 Teeth Sprocket 1/4" Pitch, 15mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 20 Teeth Sprocket 1/4" Pitch, 19mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 20 Teeth Sprocket 1/4" Pitch, 12mm Bore Carbon Steel, Keyway with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Keyway with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 19 Teeth Sprocket 1/4" Pitch, 10mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 19 Teeth Sprocket 1/4" Pitch, 15mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 20 Teeth Sprocket 1/4" Pitch, 10mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 19 Teeth Sprocket 1/4" Pitch, 12mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 20 Teeth Sprocket 1/4" Pitch, 6.35mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 17 Teeth Sprocket 1/4" Pitch, 15mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 18 Teeth Sprocket 1/4" Pitch, 8mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 20 Teeth Sprocket 1/4" Pitch, 6mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 15 Teeth Sprocket 1/4" Pitch, 14mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 18 Teeth Sprocket 1/4" Pitch, 12mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 19 Teeth Sprocket 1/4" Pitch, 14mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 17 Teeth Sprocket 1/4" Pitch, 14mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 17 Teeth Sprocket 1/4" Pitch, 12mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 19 Teeth Sprocket 1/4" Pitch, 6mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 18 Teeth Sprocket 1/4" Pitch, 10mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 17 Teeth Sprocket 1/4" Pitch, 8mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 17 Teeth Sprocket 1/4" Pitch, 6mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 19 Teeth Sprocket 1/4" Pitch, 8mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 17 Teeth Sprocket 1/4" Pitch, 6.35mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 15 Teeth Sprocket 1/4" Pitch, 8mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 16 Teeth Sprocket 1/4" Pitch, 8mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 16 Teeth Sprocket 1/4" Pitch, 15mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 16 Teeth Sprocket 1/4" Pitch, 10mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 9 Teeth Sprocket 1/4" Pitch, 5mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 18 Teeth Sprocket 1/4" Pitch, 15mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 17 Teeth Sprocket 1/4" Pitch, 10mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 12 Teeth Sprocket 1/4" Pitch, 10mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 16 Teeth Sprocket 1/4" Pitch, 6mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 15 Teeth Sprocket 1/4" Pitch, 12mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 13 Teeth Sprocket 1/4" Pitch, 6mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 15 Teeth Sprocket 1/4" Pitch, 10mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 14 Teeth Sprocket 1/4" Pitch, 12mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 15 Teeth Sprocket 1/4" Pitch, 6mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 12 Teeth Sprocket 1/4" Pitch, 5mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 12 Teeth Sprocket 1/4" Pitch, 8mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 14 Teeth Sprocket 1/4" Pitch, 6.35mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 14 Teeth Sprocket 1/4" Pitch, 8mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 10 Teeth Sprocket 1/4" Pitch, 6mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 12 Teeth Sprocket 1/4" Pitch, 6mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 10 Teeth Sprocket 1/4" Pitch, 8mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 9 Teeth Sprocket 1/4" Pitch, 6.35mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 14 Teeth Sprocket 1/4" Pitch, 6mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 15 Teeth Sprocket 1/4" Pitch, 6.35mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 10 Teeth Sprocket 1/4" Pitch, 10mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 14 Teeth Sprocket 1/4" Pitch, 5mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 14 Teeth Sprocket 1/4" Pitch, 10mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 11 Teeth Sprocket 1/4" Pitch, 6mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 13 Teeth Sprocket 1/4" Pitch, 8mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 13 Teeth Sprocket 1/4" Pitch, 10mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 10 Teeth Sprocket 1/4" Pitch, 6.35mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 12 Teeth Sprocket 1/4" Pitch, 12mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 11 Teeth Sprocket 1/4" Pitch, 8mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 9 Teeth Sprocket 1/4" Pitch, 6mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 9 Teeth Sprocket 1/4" Pitch, 8mm Bore Carbon Steel with Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- 10 Teeth Sprocket 1/4" Pitch, 5mm Bore Carbon Steel with 2 Set Screws - Features:1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use.2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use. Fully black oxide coated, rust resistance.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 25mm Bore 3/8" Pitch 28 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 20mm Bore 3/8" Pitch 28 Tooth Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 20mm Bore 3/8" Pitch 28 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 7mm Bore 1/4" Pitch 19 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 6mm Bore 1/4" Pitch 20 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 8mm Bore 1/4" Pitch 20 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 8mm Bore 1/4" Pitch 19 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 10mm Bore 1/4" Pitch 19 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 7mm Bore 1/4" Pitch 20 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 6mm Bore 1/4" Pitch 17 Tooth, Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 6mm Bore 1/4" Pitch 19 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in a conveyor system, milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 10mm Bore 1/4" Pitch 20 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 12mm Bore 1/4" Pitch 20 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 17mm Bore 3/8" Pitch 25 Tooth Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 20mm Bore 3/8" Pitch 25 Tooth Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 10mm Bore 3/8" Pitch 18 Tooth Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 12mm Bore 3/8" Pitch 20 Tooth Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 15mm Bore 3/8" Pitch 18 Tooth Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 10mm Bore 3/8" Pitch 15 Tooth Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 25mm Bore 3/8" Pitch 25 Tooth Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 17mm Bore 3/8" Pitch 21 Tooth Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 25mm Bore 3/8" Pitch 28 Tooth Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 12mm Bore 3/8" Pitch 16 Tooth Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 7mm Bore 3/8" Pitch 14 Tooth, Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 12mm Bore 3/8" Pitch 18 Tooth Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 12mm Bore 3/8" Pitch 21 Tooth Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 12mm Bore 3/8" Pitch 17 Tooth Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 8mm Bore 3/8" Pitch 14 Tooth, Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 10mm Bore 3/8" Pitch 16 Tooth Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 6mm Bore 3/8" Pitch 14 Tooth, Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 6mm Bore 3/8" Pitch 12 Tooth, Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 7mm Bore 3/8" Pitch 12 Tooth, Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 20mm Bore 3/8" Pitch 25 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 10mm Bore 3/8" Pitch 16 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 8mm Bore 3/8" Pitch 12 Tooth, Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 15mm Bore 3/8" Pitch 18 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 10mm Bore 3/8" Pitch 18 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 5mm Bore 3/8" Pitch 12 Tooth, Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 12mm Bore 3/8" Pitch 17 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 8mm Bore 3/8" Pitch 14 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 17mm Bore 3/8" Pitch 21 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 12mm Bore 3/8" Pitch 18 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 8mm Bore 3/8" Pitch 13 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 12mm Bore 3/8" Pitch 16 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 17mm Bore 3/8" Pitch 25 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 7mm Bore 3/8" Pitch 13 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 8mm Bore 3/8" Pitch 12 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 7mm Bore 3/8" Pitch 14 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 5mm Bore 3/8" Pitch 12 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 12mm Bore 1/4" Pitch 20 Tooth Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 6mm Bore 3/8" Pitch 14 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 7mm Bore 1/4" Pitch 19 Tooth, Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 6mm Bore 1/4" Pitch 19 Tooth, Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 6mm Bore 3/8" Pitch 13 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 8mm Bore 1/4" Pitch 20 Tooth, Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 7mm Bore 3/8" Pitch 12 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 6mm Bore 3/8" Pitch 12 Tooth, Carbon Steel with Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with a sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 9mm Bore 1/4" Pitch 17 Tooth, Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 7mm Bore 1/4" Pitch 20 Tooth, Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Idler Sprocket, 6mm Bore 1/4" Pitch 20 Tooth, Carbon Steel with 2 Insert Bearing - Features:1. Idler sprocket is a flat sprocket, with double sealed bearing that allows the sprocket to rotate freely. Idler sprockets are normally mounted in a fixed position on a fixed shaft.2. The Idler sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain idler sprocket comes with strong teeth that can latch onto the chain. It is suggested that idler sprockets have at least three teeth in mesh with the chain.3. The product is made of c45 carbon steel, the tooth part high temperature quenching heat treatment, high hardness, wear resistance, long service life, easy to use.4. Widely used in milling machine, drilling machine or other machinery transmission occasions.
- Browning HN50B17 Sprocket Idler, 1" Bore, 17 Teeth - OtherHVACPOWER TRANSMISSIONELECTRICALFILTRATIONMATERIAL HANDLINGAUTOMATION CONTROLMACHINERYROBOTICSSEARCH BY BRANDMOTION CONTROLQUALITY & TESTSENSING DEVICESSPEED CONTROLSINDUSTRIAL CONTROLPUMPSPNEUMATICSHYDRAULICSVALVESBEARINGSASSEMBLY TOOLSREGENERATIVE BLOWERSCOMPUTERS & ACCESSORIES Industrial Parts R Us buys and sells "Surplus New", "Used" and "Obsolete" Automation Controls, and Industrial Process Equipment. Since 2008 we have been providing quality products to small business and industry with unbeatable prices. In our store you can find anything from Control Relays to Complete Robotic Systems. We purchase bulk loads of Industrial Equipment and Surplus Parts, recover all components, visually inspect, and throughly clean each item in order to provide the best products for our customers. .
- Tsubaki 60Bb15H 15 Tooth 3.98" Diam Chain Idler Sprocket New Free Shipping
- Martin 40Bb17H Idler Sprocket 40 Chain 17 Teeth
- MARTIN IDLER SPROCKET 80B17 with McGILL MS51962-26 MI 31 RACE & BEARING 1 15/16 - McGILL BEARING MS51962-26 MI 31 1 15/16" BORE 1 3/4 WIDE.
- UCP204-12 Pillow Block Bearing 3/4" Bore 2 Bolt Solid Base (10PCS) - The UCP pillow block mounted bearing series has two bolt holes, and a set screw lock is designed for mounting onto bearing surfaces parallel to the shaft axis, such as conveyor belts. This one-piece pillow block housing allows for a stationary outer ring and rotating inner ring.
- 48-Tooth Idler Sprocket ( 04Z028 ) - 48-Tooth Idler Sprocket. This idler is designed to work with 1/2" pitch, 1/2" wide roller chain. Alltronics part # 04Z028.