1. Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve
2. Connect the waste-disposal tube to the unit
3. Connect the power cord, and switch on the power switch (O=off, l=on)
4. When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18)
5. To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet)
Attention:If there is some abnormal noise when working on
Possible reason Axon is loosing Disc is not plain enough
How to solve itDissemble the disc with spannermake the snap
Ring tightly change the disc
The machine does not work when power on
Possible reason fuse get burnt motor get burnt switch get wrong
How to solve it change the fuse 22 which inside the socket change the motor change the switch
SpecificationsVoltage: <A>220V/50Hz±10%
Power: 500W Rotational Speed: 2800 rpm
Dimensions: 44×35×35cm Weight of the dental trimmer: 20kg
Content:
1x JT-19 Wet Model Trimmer Abrasive Disc Wheel Dental Lab Equipment
PaymentDelivery detailsFeedbackReturn policyContact usPayment We accept PayPal and bank transfer. All payments must be made within 7 days after the auction ends. Non-paying bidders will be reported to eBay. Please don't buy an item if you can't/won't pay for it. We accept Credit Cards via PayPal. Delivery details 2-5 working days to: UK 5-7 working days to: France ,Germany ,spain ,Italy 6-10 working days to: Other countries Feedback We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! Return policy Please keep the original box or packaging within 15days since item received. Returned item must come with original box or packaging. Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects. a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package. b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item. c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid. Thank you. Contact us