For Nintendo Switch Joy-Con Charging Dock Station Charger with LED indication UK

£8.99 Buy It Now 3d 20h, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee

Seller: macxlqery64 (51) 96.4%, Location: Shenzhen, Ships to: Worldwide, Item: 383207490021 Product introduction: This is a dedicated charging stand for charging the Switch Joy-Con controller. Four controllers (two "-", two "+") can be charged at the same time, powered by a 5V DC power supply, with a two-color LED indicating the operating status of the charging cradle. This product is beautiful and practical, plug and play, easy to operate and simple. Instructions: Connect the USB power cable to the USB power supply to supply power to the charger. Plug the controller into the card slot of the charging stand to charge Electrical specifications: When power is on, if there are 3 to 4 handles connected to the charging stand, then each handle will be powered for 1.5 seconds in turn. After all the handles complete this action, two of the handles will be charged. the indicator light: The handle is connected, the red LED is long bright; the battery is fully charged, the green LED is long; no charging, all LEDs are off. At most two handles are charged at the same time, and the charging current of each handle is about 200ma. overcurrent protection: The maximum current allowed to pass through each charging port is 400ma. If it exceeds 400ma, the charging port will be over-current protected, the red LED will flash quickly, and the over-current state will be restored after the handle is pulled out. in turn charging: two combination charging, switching time is 10 minutes. For example, the last time the 1/2 handle is charged, the next 3/4 handle is charged. After the handle of the corresponding position is fully charged, the power is continuously supplied and the power supply continues. low pressure overvoltage mode: red LED slow flash. The voltage is lower than 4.2v and enters the low voltage mode. The voltage is greater than 4.7v and returns to normal. The voltage is higher than 5.6v and enters the overvoltage mode. The voltage is less than 5.3v and returns to normal. timeout charging: In theory, the handle can be fully charged after charging for about 3 hours. If the handle is connected to the charging stand and the battery is not fully charged after 4.5 hours of charging, the green LED is directly illuminated. red and green LED conversion conditions: The handle is connected, the red LED is long; the detected current is less than 30~45mA for 30 seconds, then the handle is fully charged, the green LED is long; after the handle is disconnected, the green LED is extinguished; Re-plug the fully charged handle, at least wait for more than 30 seconds, the red LED will switch to the green LED) Package Includes: 1x Joy-Con Charger (not include the console) Condition: New, Brand: Unbranded/Generic, MPN: Does not apply, Suit For: Nintendo Switch Joy-Con

PicClick Insights PicClick Exclusive
  •  Popularity - 51 views, 0.9 views per day, 58 days on eBay. High amount of views. 1 sold, 6 available.
  •  Price -
  •  Seller - 51+ items sold. 3.6% negative feedback. Good seller with good positive feedback and good amount of ratings.
Similar Items