150-080 Hermle Clock Movement

£223.84 Buy It Now, £70.69 Shipping, eBay Money Back Guarantee
Seller: clockworks ✉️ (6,973) 98.2%, Location: Huntington, Massachusetts, US, Ships to: WORLDWIDE, Item: 325386510899 150-080 Hermle Clock Movement. Instructions and expert support. Such as the pendulum unit 141-040 or the non pendulum balance wheel version such as the 140-010. They all take a #8 size clock key. What is the difference between the 040 and the 070 Hermle units?.  

150-080 Hermle Clock Movement

150-080 Hermle Clock Movement

The 150-080 Hermle Clock Movement runs 14 days on a single wind. It has strike hammer(s) that will strike out the hours a the top of the hour, and strike once for the half hour.

  Hermle Clock Movement - Replace instead of repair. A fraction of the price, lasts longer, ships now. Instructions and expert support. - Clockworks

Please view these information tabs to learn about Hermle Clock Movement 140/141 series.

Hermle 140 / 141 Clock Movement

Hermle 140 / 141 Clock Movement comes in either the pendulum or non pendulum styles. Such as the pendulum unit 141-040 or the non pendulum balance wheel version such as the 140-010 .

This is a fourteen day unit, it runs the 14 days on a single wind up. At one time, they were made to run only 8 days. If the numbers are with a 5 instead like 151 or 150-xxx it's an 8 day wind. All they did to make this happen was put a longer mainspring in the barrel.

So if having a 151 or 150 unit, the new unit to this is a 141 or 140-xxx instead. The rest of the numbers are consistent with the old. Just match them up.

Movement Details

Hermle 140 / 141 Clock Movement series are all spring driven with 85 x 98mm plate size. They all take a #8 size clock key . What we offer on this page is the movement only wit out the pendulum , gong or dial .

It will come as the movement itself with its hand nut , and if a pendulum unit it comes with the suspension spring and leader . The 141-040 , 141-030 , and a 141-033 all comes with a calendar.

You have to remove this calendar. If not have the days of the month on the current dial. It's easy, all you have to do is remove excess things. See the other tab about how to remove the calendar.

The speed

The time from deciding to repair the clock, to having it done, is the very least it could be. It will ship out the next business day, unless its a special gearing. If this is the situation it will take about 4 days to ship as the movement.

This is because the movement comes apart and put together with special gears. You can tell if it is a regear unit if it has an extra charge on the movement that cost more than the rest of the movements. The choice is clear to get the new one instead of overhauling the old unit.

Get the movement in a week or two instead of months later, it will cost about a third the amount of a typical overhaul charge also.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2022

Clock Movement 141-040 141-070 Compatibility

The compatibility between the clock movement 141-040 and 141-070 needs explanation and clarification. At one point in time the same number was used for both versions .

What is the difference between the 040 and the 070 Hermle units? The 040 series has a one hammer on the back whereas the 070 units have two bells on the back.

It is common to get an 070 as a ment for an 040 gong strike. This is because the two units are cross compatible. To make it a gong strike, we only need to remove one of the hammers with its wire and take off the bells.

The reasoning behind this is simply the cost of importing the movements from Germany. There are minimum purchase requirements for each series. So it only makes sense to import one series that is cross compatible.

In most cases the customer leaves the bells and ditches the gong as the sound is better.

What is even more confusing is that there was a time when the 141-070 had a gong strike or a bell strike. It was the same number for both types.

So what was previously known as a 141-070 is now referred to as a 141-040 . So, if you have a 141-070 see if it has one hammer on the back that strikes a gong, or if it has bells on the back. If having the bells get the 141-070 and if it has a gong order the 141-040.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2022

Clock-Movement Calendar Removal

This section is referring to the Clock-Movement Calendar Removal Instructions for calendar versions of the Hermle clock movement 141-040 141-030 and 141-033

Many of these units come with a calendar as indicated by the letter K after the movement numbers. This is the usual way some movements are supplied by the manufacturer. This way it covers movements with and without a calendar.

In this way only one style is to be made, shipped, and stored ready to ship. So sometimes the new movement only comes into the country with a calendar attached. The below information will enable the removal of the calendar portion if needed to do so for the installation.

Such as if the calendar tube is in the way of installing the new movement to the dial.

Clock-Movement Calendar Removal Instructions Continued

Look at the new movement and see two hex nuts on the front of the clock holding a small plate with gears under it. See that the old unit does not have this.

Take these hex nuts off, and the plate, and slide the big gear off of the hand shaft. This big gear is just for the calendar.

There is a small C clip that blocks the hour hand tube from coming off. Remove the C clip with a small flat screwdriver and the hour hand tube will come off. Do the same thing with the old unit and put the old unit hour hand tube on the new unit.

Note the exact position of the new movement’s hour tube. This position is important to note before taking it off and put the old unit’s hour tube in the exact position. What is meant by position is the humps on the snail looking portion that is attached to the hour hand tube.

This has to be the same position on the new one just like it was on the old. If it is not the same then the hourly strikes will be off. The deepest slot is 12 o’clock and the highest hump is 1 o’clock.

Post Removal

The mounting posts where the hex nuts were located are still on the clock movement. Now if these are in the way of mounting the movement to the dial, they would need to be removed. The clock movement calendar removal would require these to be snapped off.

This may seem harsh but if using a pair of pliers and bend them down and up, they will snap off. This is because these posts are only pressed in by machine and there is no other way to remove them. This is the intent of the factory to have done, when needed.

Strike Count Reset

It is time to test the strikes and see if they are correct and that the hour hand tube in the correct position. Make the clock strike and count how many times it strikes.

If one o’clock and 12 o’clock strike correct its all set. Tf it strikes 1 and 12 out with the correct number of strikes, then the rest is ok also.

If this is too much information then send in the old unit and the new unit and we will swap it out at for a charge of $30 Plus shipping.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2022

About Hermle Clock Movements

Hermle clock movements are among the finest movements made in the modern times. The German made Hermle units typically work night and day for 30 years without much complaint.

To go and get it restored like normally would with any clock after a long time, it is found that is cost is high. This is for good reason as it can be a large task to restore it.

But as seen, since its a modern day unit (Post War German) it can be available new for a very good price.

Get a new movement instead of a fixed up old one, get it in 3 days instead of 6 months. Save hundreds of dollars doing it also.

 

Movement grades

All the Hermle clock movements Clockworks offers is the best grade. In other words there are a couple styles some units have that are not as good as others. There are various movements that have more than one grade.

Some units can have plastic for the hour hand tube and the next wheel down, instead the better brass. Meanwhile the number is the same for both grades. In other words there is the economy grade and there is the full grade, on some movement series.

Please know that Clockworks will only ship the best grade Hermle clock movements available, every time.

What will be received

Each one of the these fine Hermle clock movements come already oiled , will come with the hand nut also.

If it is a pendulum style clock, it will come with the suspension spring and the pendulum hanger (leader) .

If its a weight driven clock, it will come with new chains or cables and with pulleys .

So this will be the movement with its hammer assemble on.

This is the complete movement that comes out of the clock. No weights , pendulum , chime block , hands , dial all this is already present usually.

Upon ordering Hermle Clock Movements

When placing an online order a receipt will be emailed provided the correct email address is entered. If no receipt, please check the spam folder for the receipt from us.

On the receipt is the link to click for the instructions for the product. The Hermle clock movements ships from Huntington, MA 01050 USA and sometimes from other locations also. The movements go out the next business day unless there is something we have to do to it such as a regear.

The Hermle clock movement ships out UPS or sometimes FedEx. Movements rarely ship via USPS unless there is a special request or an international customer.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2022

Hermle Clock Pendulum Measuring

If a Hermle clock doesn't keep proper time, the pendulum may be incorrect. To determine if this is the problem, measure all of the components of the pendulum .

Hermle clock pendulum measuring is extremely important. Often enough the CM length stamped on the movement is not the actual pendulum length. Certainly, the CM stamp provides valuable information, however it does not state what the Hermle clock pendulum needs to be from tip to tip. This section describes what the CM stamp represents, as well as how it needs to be measured.

What the CM represents

To measure a Hermle clock pendulum, start at the very top of the movement. Continue all the way down to the bottom of the rating nut on the pendulum. The CM number will only be accurate to the pendulum length if the bob diameter is small.

In other words, the larger, or the heavier, the bob is, the longer the pendulum needs to be despite the stamped length on the movement. If confused, please email Clockworks in order to determine the best pendulum length. Please provide the Hermle clock pendulum CM length stamped on the back plate of the movement.

Also, include the width of the pendulum bob . The bob is the round disk at the bottom of the pendulum .

Hermle Clock Pendulum Measuring - Parts that are measured

The Hermle clock pendulum length (**cm) is the distance from the suspension post all the way down. Meaning to the bottom of the pendulum nut threads . This measurement the pendulum from tip to tip, the leader it hangs on, and the suspension spring.

This pendulum length will not always be the same as what is marked on the movement. Subsequently there are also other factors that play into this measurement. For instance, the pendulum bob diameter. The larger the pendulum bob diameter, the longer the pendulum length needs to be despite the CM length.

Conclusion

In conclusion, if the Hermle clock pendulum CM length on the old unit matches the CM length on the new unit it will keep proper time with the same pendulum. There are times when the old leader needs to be used on the new movement, but this is not common.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2022

Mechanical Clock Movement Wear

Mechanical clock movement wears out after years go by because the oil turns solid. With age, the mechanical clock movement's oil solidifies and becomes black and sticky.

By the time 20 or 30 years go by, the oil has solidified and is creating wear on the brass plates of the movement. So, when this happens, the clock movement will not run correctly.

This is when the movement will need a cleaning at least, or be d . Of course, a brand new movement is always the best option.

What wear and where

Look at the old clock movement, and see holes in the brass plates where there are small pivot arbors sticking into these holes. These pivots are what the gears of the clock ride upon and as the pivots spin in the solidified oil, this makes the holes oblong instead of round.

With the pivot holes oblong, the holes are pinching the pivots and creating resistance in the gear train. With the solidified oil and the pinched pivots, the clock will eventually stop working or chiming.

Invisible clock movement wear

This wear takes place in the holes that are in the brass plates and is hard to identify sometimes. These holes in the brass plates become oblong instead of round and this pinches the pivot arbor going into it. Between this, and the solid oil, the clock ceases to function.

To have this repaired is an expensive and long process. To have a mechanical movement serviced can cost two times as much or even three times the amount of the new one.

However, once the movement starts having problems due to the oblong pivot holes, something will need to be done. The clock will never stay running otherwise.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2022

New Clock Movement Benefits

New clock movement benefits far outweigh the benefits of a restoration . This section will explain why that is and what the best course of action is to get your clock working.

Servicing the movement

Clocks need to have fresh oil after 10 years or so. Then, after 20 or 30 years, a full break down of the movement is necessary. This is all well and good and can be done with the old movement.

The movement will run for another 5 or 15 years with no issues but then it will be time to do it again. So obviously this is a new clock movement benefit.

Every time the movement needs to have work done on it or needs bushings, it will last less and less time before it needs attention again. So another new clock movement benefit is that this would not happen.

The repair process is expensive because it takes time to separate the plates, remove all the gears, do the necessary work, and then put them all back together again.

This process may need to be redone if not perfect the first time. The turn around time to complete an overhaul on a clock movement could be anywhere from 1 to 3 months, and in some extreme cases, a year.

It is a slow moving venture that costs twice as much as a new movement would. If a new clock movement is not available, then this is the best, and only, way to handle a clock repair .

Replacing with a new clock movement

If the clock movement is still in production, it is far better to just get the new clock movement. Mass production makes the movement so affordable it will cost a fraction of the price of the repair work.

The new clock movement will be the same one but brand new and ready to run 30 years without much complaint. There is absolutely no way to repair an old clock movement so that it is better than new.

Even the best clockmaker using the best equipment cannot make the clock movement better than a new one.

A new clock movement is a factory fresh restart. The clock will be like it was originally when you first made the purchase from the store. The new clock movement will be made by the same people, with the same machines, and the clock movement is the same.

It is not a close replica or made somewhere else besides Germany. It is the same movement. Not a knock off or replica. So wouldn't it make sense to get the new clock movement instead of chasing the old?

The choice is clear and obvious. The new movement will cost a fraction of the price and the clock is up and running in no time.

Movements That Would Need a Repair or an Overhaul

If a new clock movement is not possible, then a repair is most likely the only option. However we will try to convert it to a new clock movement that is close and easy to adapt.

If it is not an easy one to adapt, or would take too much case work, then the best solution is to have us work on it. Another clock movement to consider having restored instead of replacing it is the tubular bell, which is a high end movement.

The price of a tubular bell new clock movement makes an overhaul more attractive. This is due to the high price on the new clock movements which is over $1600.

Usually the price is less for the new unit but instead these new clock movements are more costly than the overhaul by Clockworks anyway.

We can charge a much lower amount for the complete overhaul on these units. Ultimately the choice is yours. There is a good argument in both directions that makes sense on these expensive new clock movements.

Clockworks = The best repair service

We would love to do the clock movement overhaul here at Clockworks and we do the best job. There are two ways to fix clocks; the easy way and the hard way. We only repair clock movements the hard way with no short cuts.

Even with new clock movements, we inspect them and make sure all is well before shipping them out. It is even more important for us to do your repair than another company because we do not go to your house. There is no one being intrusive in your home and possibly damaging your clock case.

The clock movement itself is the only item that gets sent to us. No components need to be sent since we have everything else here such as weights, dials and pendulums. It is a great advantage to have Clockworks work on your clock movement for this fact alone.

A clock supply depot such as us does not need to wait for parts. We possess everything we could possibly need to complete a thorough, professional clock repair right here. If a new clock movement is not possible, then this repair is your best and only option.

The new movement

New clock movement benefits usually do indeed outweigh the repair option. The movement will already have lubrication with clock oil so there is no need to oil it.

The new clock movement comes with cables and pulleys, or chains, the leader, and suspension spring .

This is everything that comes out when you remove the two screws that are under the clock movement, besides the dial and weights .

Once you get the hands and the clock dial out of the way (instructions are sent via email) it's only a matter of removing the two screws from underneath.

The new clock movement can then be put in by someone with experience in 10 or 15 minutes. A person with no experience will take longer, but the point is that it isn't hard to do. This is definitely a new clock movement benefit.

There are some instances where a clock case was made in an annoying way that makes it more difficult, but for clock movements that were in a mass production this is not the situation. This relates more to a few individual clockmakers who's design of the case makes it more tricky to get the new clock movement in or out.

Summary of New Clock Movement Benefits

A new clock movement is typically less than half the cost of an overhaul.

It will also be on its way to the customer instantly instead of months later. A new clock movement will last the longest of any other choice.

The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2022

Hermle Clock Movement Aliases

Hermle produces clock movements but the use of aliases is quite prevalent. The movement could have a stamp with any name but really it will be made by Hermle.

Some companies bought so many movements that they were able to get their name on the movement instead of Hermle. The following is only a partial list of names that could be on the clock movement.

The best Aliases in Disguise

Seth Thomas and Mason and Sullivan had not only their name, but also their own internal numbering system.

Their stamp and number was on the movement instead of the Hermle number. Since it is not a Hermle number, the number would need to have a conversion to the real number. Correspondingly, this is done with the Mason and Sullivan chart , or the Seth Thomas conversion Chart .

However the Seth Thomas chart is not very accurate, please see instructions on that page.

Best to the movement

It is best to the clock movement if either of these names are on the movement automatically. Of course, do not have to think and decide if a repair is better, the answer is a simple no. These companies went out of business a long ago and the life of the unit is over.

Ordinarily, the lifetime is 25 - 30 years before it needs an overhaul or ment. In fact, if ST or Mason Sullivan is on the movement that would indicate the clock is about 40 years old or more.

The other Hermle Clock Movement Aliases are easy

All in all, Hermle Clock Movement Aliases on other clocks use only their name, and not their own internal numbering system on the Hermle movements . So basically if the clock is of post war German origin just look at the number and forget the name.

Additionally, the numbers will indicate what movement it is. If it is a Hermle movement there are 3 or 4 digits then a hyphen, and then 3 more digits. For example, 1161-853 or 340-020 or 351-060. If the numbers look like this it is made by Hermle.

Other Names Used
  • Hamilton
  • S. Larose
  • Mason & Sullivan
  • Welby
  • Pearl
  • Tally Industries
  • Bulova
  • Seth Thomas
  • Howard Miller
  • Sligh

Hermle Number Examples

Below are some typical examples of the Hermle clock movement numbering system. If the clock numbers are similar to this, it is made by Hermle.

  • 451-050 94cm
  • 340-020
  • 140-070
  • 451-030 66cm
  • 341-020 45cm
  • 1151-050 114cm
  • 451-053 94cm
  • 1161-853 114cm
  • 141-070 45cm
  • 351-050 55cm
  • 1161-850 94cm
  • 241-070 94cm
The content of this website is copyright by Clockworks and written by James Stoudenmire in year 2022

Hermle Clock Movement Directory Explanation

Above all, a Hermle Clock Movement Directory is to get to the correct page that contains the clock movement. This is an important first step when ordering a new clock movement.

Thus, Hermle mechanical movements have numbers on the back plate starting with the below few numbers.

Then a dash (-) follows and then some more numbers. For example: 340-020 131-070 1161-853 351-020 and so forth.

So, if the clock says something like 1161-053 drop the second half and click the 1161 button below. Then this will go to the page where the 1161-053 is as well as the rest of the 1161 series.

Hermle Clock Movement Directory, Number starts with.....
130+131+132 140+141 241
261 340+341 350+351
451 461+471 1050+1051
1151 1161 1171

If Not Listed

If the Hermle clock movement is not found on these pages we may still have it as a conversion or we may be able to create it out of what exists. However, we need to know the movement number.

So please email the movement number. Of course a picture of the back plate is also helpful. Moreover, if the movement numbers do not look like the Hermle movement numbers it may be made by someone else.

Additionally, the mechanical movement identification page will assist with determining who made the clock. In any event, this is for post WW2 modern mechanical clock movements made in Germany only.

Hermle Clock Movement

The numbers on the back plate of the movement is everything one needs to get a ment. If the numbers match then the Hermle Clock Movement matches.

If the clock is a pendulum unit, be sure to select the proper CM length that matches the old unit.


Hermle Clock Movement
Assistance =

150-080 Hermle Clock Movement

The 150-080 Hermle Clock Movement runs 14 days on a single wind. It has strike hammer(s) that will strike out the hours a the top of the hour, and strike once for the half hour. The 150-080 Hermle Clock Movement has a 85 x 98mm outer plate measurement. They all take a #8 size

  • Condition: New
  • Brand: Hermle
  • Type: Clock Parts
  • Material: Brass
  • Color: Gold
  • Time Period Manufactured: Post 1950
  • Country/Region of Manufacture: Germany
  • Model: 150-080

PicClick Insights - 150-080 Hermle Clock Movement PicClick Exclusive

  •  Popularity - 3 watchers, 0.0 new watchers per day, 519 days for sale on eBay. High amount watching. 0 sold, 10 available.
  •  Best Price -
  •  Seller - 6,973+ items sold. 1.8% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive