ZVS 1000W High Voltage Induction Heating Board Module Flyback Driver Heater

£30.99 Buy It Now, FREE Shipping, 14-Day Returns, eBay Money Back Guarantee
Seller: szcbtde001 ✉️ (2,070) 96.1%, Location: Timovis, GB, Ships to: GB, Item: 315181882948 ZVS 1000W High Voltage Induction Heating Board Module Flyback Driver Heater.
Product Description

Specification:

Note: Copper pipes cannot collide with each other

Brand new

This section of induction heating using low-voltage DC power supply 12-48V

Maximum current 20A, maximum power 1000W

Tested 53V power supply when working properly

Because of its moderate power, can be used for small parts DIY players do hardening, annealing and other heat treatment

Also can be used with a graphite crucible melting gold, silver, copper, aluminum and other metals, uniform heating fast, very convenient

Inside diameter of the coil: approx. 40mm

Height of the coil: approx. 50mm

24V input with no load current of 3A

48V input with no load current of 6A

The higher the voltage, the greater the heating current when the same thing, the effect is better

But at the same time heat is also large, so to eradicate the actual situation to select the input voltage, the general use of the words 24V or 36V power supply is enough

It suits 12-36V power supply (not included)

The coil accept 40mm crucible

Package included:

1 x ZVS low voltage induction heating board

1 x brass coil

Note:

The kit contains a full set of driving circuit elements and brass

Buyers need to bring their own power and cooling unit.

The circuit board using double-sided fiberglass board, mainly copper traces are used to widen use the entire back surface of the resonant circuit common, continuous work, please add a fan to blow down from above, to the resonance capacitors and other components cool.

The use of switching power supply Please note that due to high power are generally slow start function, which just opened machine output voltage is slowly rising, while it is turned on before the induction heating circuit if the voltage rises to 12V, because start insufficient voltage can not afford to vibration, resulting in two simultaneous conduction mos tube so burned components

So the first will start switching power supply voltage reaches 12V above and then access the induction heating circuit.

The volume of the object being heated inside the heating coil can not exceed 1/5 of the volume (if the heating cylinder, then heating coil diameter less than the diameter of 1/3), or it may be due to overload or burn out the power supply to the circuit

Although this circuit can tolerate 20-30A input current moment, but do not exceed 15A when safe work, you can easily add an ammeter between the power supply and heating driver board but always monitor the current overload

This circuit can not only do the induction heating, the copper tube into the high-frequency transformer, is a powerful inverter.

To increase the heat sink using a customized substrate as thick as 8.5mm! Cooling capacity is very powerful.

Using the M4 pillars, fever smaller, more efficient.

    powered by
    • Condition: New
    • Brand: Unbranded

    PicClick Insights - ZVS 1000W High Voltage Induction Heating Board Module Flyback Driver Heater PicClick Exclusive

    •  Popularity - 0 watchers, 0.0 new watchers per day, 32 days for sale on eBay. 1 sold, 2 available.
    •  Best Price -
    •  Seller - 2,070+ items sold. 3.9% negative feedback. Good seller with good positive feedback and good amount of ratings.

    People Also Loved PicClick Exclusive