Kingfisher PC-1 RTU PLC Processor Module with Integrated Power Supply.
The listing is for one card only, the remaining one we have left is the one pictured on the right that has its cover, the attached cable will come with it if you want it. If you turn the card over and view from the side that plugs into the back plane there is a sticker that says PC-1-0S0 and another with the serial number 23789
Location now C3
Back plane is not included.
For more information on this system please download the Kingfisher PDF here .
Features:
The PC-1 combines the functions of a power supply and a processor module. The PC-1 can only be installed in the first slot of a 4-slot backplane (BA-4) and operates from a nominal +12VDC supply (typically 13.8VDC).
The module has one fixed RS232C port and one option port.
Product specifications: | ||
Processor | ||
Processor Type | Intel 80C188 | |
Word Size | 16 Bit internal data bus 8 Bit external data bus | |
Clock Speed | 16MHz | |
BIOS | Y | |
FLASH RAM | 128K Total. 28K for firmware drivers. | |
Static CMOS RAM | 256K | |
Real Time Clock | Y | |
Watch Dog Timer | Y | |
Status Indication | Y | |
Battery Life - module unpowered | 7 Years (RAM) | |
Communication Ports | 2 | |
Port 1 | (RS232) Serial, 300 to 115200 Baud | |
Port 2 | (Optional) Serial, Radio, 2-Wire Line or 4-Wire Line 300 to 115200 Baud (depending on port type) | |
Modem Port 2 CCITT V23 (Optional) | 1200 Baud Communications Master / Outstation | |
Configuration Software | Toolbox | |
Diagnostics Software | Y | |
Basic Configuration | Automatic on power-up | |
Complex Configuration | Toolbox | |
RTU Address Range | 1 - 249 | |
Communications Protocol | Kingfisher, Modbus, + many more | |
Analog Block Processing | Y | |
PID Block Processing | Y | |
Logic Processing | Ladder | |
CPUs per RTU | 1 | |
Internal Power Consumption | 120mA from +5VDC | |
Auxiliary 24V Converter | 10 Watts, 400mA @ 24VDC | |
I/O Bus Data Rate | 250 KBit/s | |
CM Bus Data Rate | 83 KBit/s | |
Cyclic Redundancy | Port 1 and 2 | |
Power Supply | ||
Input Supply to PC-1 | 11.5-15VDC @ 4A Max (50W) Typically 13.8VDC if backup battery connected | |
Outputs From PC-1 | +5VDC @ 1A (5W) to Bus* +12VDC @ 4A Max to Bus* +12VDC @ 2A Max to Vr* +24VDC @ 400mA (10W) to Optional Auxiliary Output (3KV Isolation)# | |
Backup Battery * | 12V, 7AH typical. 26AH max | |
Deep Discharge Protection | RTU Shutdown at 10.6V RTU Startup at 11.8V | |
Supply Fuse | 8A (Maximum Current into the PC-1) | |
Battery Fuse | 8A (Maximum Current into or out of battery) | |
Combined Vr and 24VDC Fuse | 3A Polyfuse | |
Monitoring Item Accuracy | Battery Current | ± 10% |
PC-1 Supply Voltage | ± 5% | |
PC-1 Supply Current | ± 10% | |
PC-1 Temperature | ± 5% | |
Battery low | N/A | |
Battery Charging | N/A | |
Battery Discharging | N/A | |
Aux. 24V present | N/A | |
AC present (determined from Battery Discharging signal) | N/A | |
* Note: power output is dependent on power supply to the PC-1. Most PC-1s are powered using the 35W PSU-3 power supply. # The +24V converter is optional and must be ordered with the PC-1. | ||
Environmental | ||
Operating Temperature | -20°C to 70°C / -4°F to 158°F | |
Storage Temperature | -40°C to 85°C / -40°F to 185°F | |
Operating Humidity | 5 to 98% RH non-condensing |
Contact and inspection of goods Please contact Tim Marshman with any questions. This item may be inspected by appointment at 9 Vernon Smith Court, Ottoway, South Australia