LOCTITE 510 243 518 263 515 270 577 638 648 542 574 55 573 10ml 50 300 ml 250. All model in stock 10ml / 20ml / 50ml / 250ml / 300ml Please Note : Free delivery via royal mail all order will sent out 2nd class. this will take up to 3 to 5 working days if you have any questions please feel free to contact us at any time thank you. Thread locking Adhesive - low strength. Easy disassembly. Suitable for all metal threaded assemblies. LOCTITE® 222 is a low-strength thread locker that allows the adjustment of screws including countersunk head screws and set screws. Good on low-strength metals which could fracture during disassembly, e.g. aluminium or brass. The product works on all metals, including passive substrates such as stainless steel, aluminium and plated surfaces. t is proven to be tolerant of minor contamination due to industrial oils, e.g. engine oils, corrosion prevention oils and cutting fluids. - Ideal for low-strength thread locking of adjusting screws, countersunk head screws and set screws
- Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
- Especially suited to small thread sizes
- Permits disassembly with hand tools.
How to Step by Step Guide 1. Preparation - Cleaning
It is recommended to use LOCTITE® SF 7063/7064 to degrease and clean surfaces prior to applying adhesive.
2. Preparation - Activation
If cure speed is too slow due to passive metals (stainless steel, aluminium and plated metals) or low temperature (below 5°C), use activator LOCTITE® SF 7240 or LOCTITE® SF 7649 (see cure speed vs activator graph in the TDS).
3. Application
Apply liquid threadlocker to the engagement area. For manual dispensing the use of a peristaltic handgun is recommended to ensure a consistent application volume.
4. Application - Through Hole
Insert bolt and apply threadlocker to the exposed thread. Assemble nut and tighten to the correct/specified torque.
5. Application - Blind Hole
Apply into lower third of blind hole.
6. Assembly
Assemble and tighten. If several bolts are being assembled, torque them down to the correct value within the fixture.
7. Disassembly - Hand Tools
Disassemble with standard hand tools.
8. Hint
For the disassembly of corroded or seized parts use LOCTITE® LB 8040 Freeze and Release.