Matek Power Distribution Board with XT60 5V 12V Dual BEC Output PDB Quadcopter The PDB-XT60 has been engineered to provide the highest possible performance and reliability in a 36*50mm & 4 layers PCB. It distributes power from a LiPo pack to 6 ESCs, as well as providing synchronised & regulated DC 5V outputs & linear regulated DC 12V for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc. It offers a XT60 socket to connect the LiPo pack conveniently.   Description:   General: -Input voltage range (3S-4S LiPo operation): 9 - 18V DC -Regulated 5V and 12V outputs -LED power indicators ( 5V & 12V outputs ) -6 ESC outputs & 1 pair VCC/GND pads   ESC outputs: -Continuous current: 25A*4 or 15A*6 -Peak current (10 seconds/minute): 30A*4 or 20A*6   BEC 5V output: -Designed for RC Receivers, Flight controllers, OSD, and Servos. -DC/DC synchronous buck regulator. -Voltage: 5.0 +/- 0.1VDC -Continuous current: 2 Amps (Max.2.5A 10s/minute) -Output Ripple: 40mV (VIn=16V, VOut=5V@2A load) -Short-circuit tolerant (5 seconds/minute)   BEC 12V output: -Designed for Video TX or FPV camera with linear regulator. -The battery should be 4S LiPo (13~18V DC) - Voltage: 12.0 +/- 0.3VDC -Continuous current: 500mA (Max.0.8A 5s/minute) -Short-circuit tolerant (2 seconds/minute)   BEC 12V @ 3S LiPo -Output voltage= 3S LiPo voltage -1V   Physical: -Dimensions: 36 x 50 x 4 mm (without XT60) -Mounting: 30.5 x 30.5mm, Φ3mm - Weight: 7.5g(w/o XT60), 11g(w/ XT60)

Grab some different items from us at the same time and combine postage to save on costs! You'll only pay the postage cost of the most expensive item :)

To combine postage costs please add all the items you wish to purchase from us to your basket. Using the add to basket option available on each listing.

We strive to dispatch orders the same working day. In 99% of cases we achieve this. It is only affected by issues out of our control (illness, snow, aliens landing etc).

Please see our feedback page as a testament of our commitment to dispatch/delivery times and customer satisfaction.

Our default shipping service is 2nd class post. It is possible to upgrade shipping on all of our listings to a 1st class signed for service. With both services you stand a chance of receiving the item the next working day (including Saturday). However, with the 1st class service it is more likely.

In the very worst case scenario, it is possible for both services to take up to 15 working days to arrive.

We prefer Paypal payments but also take Postal orders (1 day clearance) & Personal cheques (7 day clearance). Please make cheques payable to UK RC Tech.