A75 – Kale 9mm bandwidth W2
The economical options for clamping, this hose clamp features a 9mm bandwidth allowing it to be used in tight areas. The band is stainless steel and is a solid option for economical sealing solutions.
1. Light product, easy assembly and space saving with compact housing and screw design
2. Burr-free and convex band edges
3. Stronger and durable with the mechanically locked single piece design of housing
4. High clamping force with low tightening torque
Screw Material: Zinc Plated Mild Steel
Housing Material: 430 Stainless Steel
Band Material: 430 Stainless Steel
E75 – Mikalor 9mm bandwidth W3
Thanks to the exclusive design of the housing and the high-strength screw, the ASFA L Worm-Drive Clip has excellent performance while being at the same time very compact.
The cold-formed stamped 9mm band, smoothed on the underside, combined with the bevelled band edges protects the hose from any damage.
Screw Material: 304 Stainless Steel
Housing Material: 430 Stainless Steel
Band Material: 430 Stainless Steel
F75 – Black Mikalor 9mm bandwidth W3
This clamp is manufactured in AISI 430 with an additional matt-black surface treatment which increases its corrosion resistance. Thanks to the surface treatment, this clamp can be mounted discreetly in any application, making it a favourite in automotive or motorcycle applications.
The geometry, band, stamping, housing and screw are identical to other ASFA clamps, meaning that the performance is not altered in any way.
Hose Clips are completely covered with Delta Seal HC Black, this is a topcoat to add both further protection + a black colour to the hose clamp.
Screw Material: 304 Stainless Steel
Housing Material: 430 Stainless Steel
Band Material: 430 Stainless Steel
T350 – Slotted Band Clamp 7.92mm Bandwidth
Employing a narrow 5/16” (8mm) band width and smaller screw size 1/4” (6mm), it is able to fit into places that the ‘traditional’ wide band clips cannot be used. A must use where space is tight.
PLEASE NOTE, this clamp is not suitable for used on soft silicone hoses. This hose clamp is suitable for EPDM rubber hoses. This clamp will cause damaged to softer materialled hoses.
Screw Material: 301 Stainless Steel
Housing Material: 301 Stainless Steel
Band Material: 301 Stainless Steel
WRE76 – Mikalor 15mm Bandwidth W3 with Inner Ring
ASFA S hose clamps fitted with stainless steel inner-rings were designed to give extra protection to the hose, especially where vibration over long periods of time is an issue.
These clamps are particularly recommended for use on silicone hoses, which can be easily cut. The inner-ring fitted to the ASFA clamp prevents damage to the hose, as well as distributing the pressure of the clamp evenly around the hose.
Screw Material: 304 Stainless Steel
Housing Material: 304 Stainless Steel
Band Material: 304 Stainless Steel
Inner Ring Material: 301 Stainless Steel
D75 - Kale 9mm Bandwidth W4
With a 9mm Bandwidth this clamp offers the highest quality material in an effective, space saving design. Where space is incredibly limited at hose outlets this clamp offers the solution. A solid and smooth band ensures that the hose will not be damaged during installation,
1. Light product, easy assembly and space saving with compact housing and screw design
2. Burr-free and convex band edges
3. Stronger and durable with the mechanically locked single piece design of housing
4. High clamping force with low tightening torque
Screw Material: 304 Stainless Steel
Housing Material: 304 Stainless Steel
Band Material: 304 Stainless Steel
D76 - Kale 12mm Bandwidth W4
With a 12mm Bandwidth this clamp offers the highest quality material but with a little bit more security for the install. Where you need a fit and forget option this clamps high torque clamping option but with its load spread over a greater area. A solid and smooth band ensures that the hose will not be damaged during installation.
1. Stronger and durable with the mechanically locked single piece design of housing
2. Higher tightening torque and clamping force with 12 mm band width
3. High clamping force with 8 low tightening torque
4. Light product, easy assembly and space saving with compact housing and screw design
Screw Material: 304 Stainless Steel
Housing Material: 304 Stainless Steel
Band Material: 304 Stainless Steel
Selecting the correct size clamp: