Mosaic Tile Grout, Flexible Anti Mould External & Internal + Fix & Grout

£3.99 Buy It Now 6h 7m, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee

Seller: Top-Rated Seller staffordshiresilicones (11,349) 99.1%, Location: st2 7bj, Ships to: Worldwide, Item: 262184851327 100% OriginalGood PricingFast ShippingMosaic Tile Grout for professionals, Flexible Anti mould External useBigSALEMOULD RESISTANT FLEXI-WIDE JOINT MOSAIC TILE GROUT is a cement-based, tile grouting compound available in a broad range of colour shades including grey for joints from 2mm up to 15mm wide around all types of tiles. It contains a fungicide which prevents the growth of black spot mould and can be applied using a sponge or rubber squeegee in areas where tiles are fixed to timber or external areas without Issue.Conforms to : BS EN 13888 CG2Inhibits black spot mould growth 4 hour working timeDurable & shrink resistantFor tiles fixed to ply-wood overlayPerfect For Wide joint mosaic projectsSuitable for external areasWill not scratch on mirror effect mosaics or glass tilesThis Mosaic Grout should be added to water in a clean container whilst mechanically stirring and mixing thoroughly to give a smooth, consistent and easily worked mortar. The recommended mixing proportions by volume are approximately 1 part water to 2 parts powder Do not add more water than is necessary as this may prolong drying and significantly reduce the compressive strength of the cured grout. Part-used grout should never be freshened up with later water additions, but should always be discarded once it appears to lose workability. In ideal conditions The mosaic grout will remain readily workable for 3/4 hours and then reach final set after about 24 hours. Application method:Use a rubber squeegee, or smooth sponge to work the grout thoroughly and consistently into the tile joints, removing the excess as work proceeds across the tiled area. Fine grout residues can be washed away with a lightly damp cloth or sponge up to 2 hours after application, with a final clean finish being achieved using a dry cloth to polish the surface when the joints have dried and hardened. Always ensure cleaning cloths are clean and free from any contamination and no excess water remains on the cleaned surface, as both are likely to cause colour inconsistency on the surface of the cured grout. The mosaic grout will be more difficult to remove from tiled surfaces than standard wall grout when dry therefore extra care is necessary to ensure residues are completely removed as the application proceeds before the grout begins to dry. Please test on small area before starting full project. May stain or damage some resin based tiles. 250G PACK SIZE Payment Shipping We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!We offer FREE shipping on all orders! Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.RETURNS If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. 100% OriginalGood PricingFast ShippingMOULD RESISTANT FLEXI-WIDE JOINT MOSAIC TILE GROUT is a cement-based, tile grouting compound available in a broad range of colour shades including grey for joints from 2mm up to 15mm wide around all types of tiles. It contains a fungicide which prevents the growth of black spot mould and can be applied using a sponge or rubber squeegee in areas where tiles are fixed to timber or external areas without Issue.Conforms to : BS EN 13888 CG2Inhibits black spot mould growth4 hour working timeDurable & shrink resistantFor tiles fixed to ply-wood overlayPerfect For Wide joint mosaic projectsSuitable for external areasWill not scratch on mirror effect mosaics or glass tilesThis Mosaic Grout should be added to water in a clean container whilst mechanically stirring and mixing thoroughly to give a smooth, consistent and easily worked mortar. The recommended mixing proportions by volume are approximately 1 part water to 2 parts powder Do not add more water than is necessary as this may prolong drying and significantly reduce the compressive strength of the cured grout. Part-used grout should never be “freshened up†with later water additions, but should always be discarded once it appears to lose workability. In ideal conditions The mosaic grout will remain readily workable for 3/4 hours and then reach final set after about 24 hours. Application method:Use a rubber squeegee, or smooth sponge to work the grout thoroughly and consistently into the tile joints, removing the excess as work proceeds across the tiled area. Fine grout residues can be washed away with a lightly damp cloth or sponge up to 2 hours after application, with a final clean finish being achieved using a dry cloth to polish the surface when the joints have dried and hardened. Always ensure cleaning cloths are clean and free from any contamination and no excess water remains on the cleaned surface, as both are likely to cause colour inconsistency on the surface of the cured grout. The mosaic grout will be more difficult to remove from tiled surfaces than standard wall grout when dry therefore extra care is necessary to ensure residues are completely removed as the application proceeds before the grout begins to dry. Please test on small area before starting full project. May stain or damage some resin based tiles. 100% OriginalGood PricingMosaic Tile Grout for professionals, Flexible Anti mould External useBigSALEMOULD RESISTANT FLEXI-WIDE JOINT MOSAIC TILE GROUT is a cement-based, tile grouting compound available in a broad range of colour shades including grey for joints from 2mm up to 15mm wide around all types of tiles. It contains a fungicide which prevents the growth of black spot mould and can be applied using a sponge or rubber squeegee in areas where tiles are fixed to timber or external areas without Issue.Conforms to : BS EN 13888 CG2Inhibits black spot mould growth4 hour working timeDurable & shrink resistantFor tiles fixed to ply-wood overlayPerfect For Wide joint mosaic projectsSuitable for external areasWill not scratch on mirror effect mosaics or glass tilesThis Mosaic Grout should be added to water in a clean container whilst mechanically stirring and mixing thoroughly to give a smooth, consistent and easily worked mortar. The recommended mixing proportions by volume are approximately 1 part water to 2 parts powder Do not add more water than is necessary as this may prolong drying and significantly reduce the compressive strength of the cured grout. Part-used grout should never be “freshened up†with later water additions, but should always be discarded once it appears to lose workability. In ideal conditions The mosaic grout will remain readily workable for 3/4 hours and then reach final set after about 24 hours. Application method:Use a rubber squeegee, or smooth sponge to work the grout thoroughly and consistently into the tile joints, removing the excess as work proceeds across the tiled area. Fine grout residues can be washed away with a lightly damp cloth or sponge up to 2 hours after application, with a final clean finish being achieved using a dry cloth to polish the surface when the joints have dried and hardened. Always ensure cleaning cloths are clean and free from any contamination and no excess water remains on the cleaned surface, as both are likely to cause colour inconsistency on the surface of the cured grout. The mosaic grout will be more difficult to remove from tiled surfaces than standard wall grout when dry therefore extra care is necessary to ensure residues are completely removed as the application proceeds before the grout begins to dry. Please test on small area before starting full project. May stain or damage some resin based tiles. Payment We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! ShippingWe offer FREE shipping on all orders! Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.RETURNS If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. 100% OriginalGood PricingFast ShippingMOULD RESISTANT FLEXI-WIDE JOINT MOSAIC TILE GROUT is a cement-based, tile grouting compound available in a broad range of colour shades including grey for joints from 2mm up to 15mm wide around all types of tiles. It contains a fungicide which prevents the growth of black spot mould and can be applied using a sponge or rubber squeegee in areas where tiles are fixed to timber or external areas without Issue.Conforms to : BS EN 13888 CG2Inhibits black spot mould growth4 hour working timeDurable & shrink resistantFor tiles fixed to ply-wood overlayPerfect For Wide joint mosaic projectsSuitable for external areasWill not scratch on mirror effect mosaics or glass tilesThis Mosaic Grout should be added to water in a clean container whilst mechanically stirring and mixing thoroughly to give a smooth, consistent and easily worked mortar. The recommended mixing proportions by volume are approximately 1 part water to 2 parts powder Do not add more water than is necessary as this may prolong drying and significantly reduce the compressive strength of the cured grout. Part-used grout should never be “freshened up†with later water additions, but should always be discarded once it appears to lose workability. In ideal conditions The mosaic grout will remain readily workable for 3/4 hours and then reach final set after about 24 hours. Application method:Use a rubber squeegee, or smooth sponge to work the grout thoroughly and consistently into the tile joints, removing the excess as work proceeds across the tiled area. Fine grout residues can be washed away with a lightly damp cloth or sponge up to 2 hours after application, with a final clean finish being achieved using a dry cloth to polish the surface when the joints have dried and hardened. Always ensure cleaning cloths are clean and free from any contamination and no excess water remains on the cleaned surface, as both are likely to cause colour inconsistency on the surface of the cured grout. The mosaic grout will be more difficult to remove from tiled surfaces than standard wall grout when dry therefore extra care is necessary to ensure residues are completely removed as the application proceeds before the grout begins to dry. Please test on small area before starting full project. May stain or damage some resin based tiles. Condition: New, Sub-Type: Mosaics, Modified Item: No, Country/Region of Manufacture: United Kingdom, MPN: 8800209894026, Custom Bundle: No, Unit Quantity: 1, Brand: staffordshire silicones, Non-Domestic Product: No, Type: tiles & mosaics

PicClick Insights PicClick Exclusive
  •  Popularity - 44,504 views, 38.0 views per day, 1,170 days on eBay. Super high amount of views. 5,292 sold, 1,823 available.
  •  Price -
  •  Seller - 11,349+ items sold. 0.9% negative feedback. Top-Rated Plus! Top-Rated Seller, 30-day return policy, ships in 1 business day with tracking.
Similar Items