Physical / Case | Weight | 5.6lb (2.54kg) |
Dimensions (W x H x D) | 5.75in. x 9.50in. x 3.00in. (146mm x 241mm x 76mm) | |
Operating Temperature | 14 °F to 122 °F (-10 °C to 50 °C) | |
Case Construction | Aluminum body, rubber end caps | |
Connector type | Lemo01 | |
Keypad | Keypad construction | Tactile membrane feedback keys, wheel control |
Transducer | Transducer type | Single, Dual, Angle, Contact, Delay |
Freq range | 0.5MHz to 30.0MHz | |
Cable length | 6ft (1.83m) standard | |
Power Source | Power Source | Single Li-Ion battery |
Battery life | 8 hours | |
Display | Display type | Sunreadable Color VGA 60Hz |
Display size | 640 x 480 pixels, 3.40in. x 4.55in. (86mm x 116mm) | |
Certification | Certification | Factory Calibration |
Warranty | Warranty | 1 year |
Measurements | Thickness range | 0.01in. to 400.000in. (0.254mm to 10,160mm) |
Units displayed | in. / mm | |
Resolution | 0.01in. (0.254mm) | |
Damping | 8 damping levels 25-375Ohms | |
Delay | 0 to 165in./μs (0 to 4,191.00mm/μs) at Full Range | |
Display Mode | RF, +HW, -HW, FW filled or outlined | |
Material Velocity Range | 0.0490 to 0.9999in./μs (1.24 to 25.40mm/μs) | |
Acquisition Speed | ||
Pulser/ Receiver | 10Hz to 5000Hz, 50V to 450V- spike and square wave pulse | |
Pulse width | 20ns to 10,000ns in square wave mode | |
Gain | 100 dB | |
Gates | Contact, IP-1st, 1st-2nd (permits thru coating, delay, bubbler, immersion) | |
IP Blocking, IF Blocking, IF-1st, 1st-2nd, Echo Blk, POS or NEG gating | ||
2 flaw gates | ||
Interface | I/O | USB |
Memory | Up to 2GB removable SD card |