Component parts for Marley Classic high capacity ogee profile PVCu gutter system. Features decorative scalloped front that provides a traditional appearance on homes, small commercial property and Ultraframe conservatory roofs.
Marley Classic is a robust, 116mm wide by 75mm deep, gutter of choice for Ultraframe Classic conservatory roofs, but is also popular for domestic and small to medium commercial properties.
Did you know? When fitted to Ultraframe conservatories, the gutter usually sits on the eaves beam, which makes standard outlets unsuitable. Therefore, if replacing outlets, check before ordering as you may need the 'Offset' versions that come out the side.
Straight union for inline joint of gutter lengths and connecting conservatory offset outlets.
Fits between inline lengths of household gutter to provide a drainage outlet for downpipe.
Outward facing right-angle corner joint for houses and Edwardian style conservatory gutter.
Angle joint for standard Victorian conservatory corners and 3-sided household bays.
Corner joint for 5-facet bays and rounded appearance 6 hip Victorian conservatories.
Joint for inward facing right-angle corners when projected roof returns across front of house.
Inward joint for returning typical victorian bay gutter across front of conservatory or house.
Simply clips to the gutter opening to seal. Choose left or right when viewed from outside.
Clips to gutter to seal end and provide an outlet. Left or right when viewed from outside.
Clips directly between two gutter lengths to provide outlet over the Ultraframe conservatory eaves beam.*
Clips directly to gutter to provide outlet and stopend over the Ultraframe conservatory eaves beam.*
Corner joint with outlet for outward facing right-angle corners of Ultraframe conservatories.
Wraps around gutter joints to lock onto guttering and provide watertight compression.
Gutter sits within this external wrap-around bracket, which is screw fixed to fascia board.
Screws directly to fascia board and becomes concealed by the gutter that hangs from it.
Simply snap-fits onto the Ultraframe Classic conservatory eaves beam to support gutter.
* Unlike their original 'clip-less' predecessors, these new Running Offset Outlet and Stopend Offset Outlets fit directly to the gutter, without the need for an additional gasket and clip component (such as stopend, union or corner).
Technical informationThe following provides information about the Marley Classic ogee profile guttering for houses and Ultraframe Classic conservatories.
Gutter Size (w x h x l) | 116mm x 75mm x 4m or 6m |
Component Size | Please refer to picture diagrams for size of individual parts |
Application | Ultraframe Classic conservatory roofs, small to large houses, flats and small to medium commercial properties |
Material | PVCu plastic |
Colour | White or Chocolate Brown (suits Rosewood or Mahogany frames) |
Quality and Standards | BS EN 607: 1996 - Eaves gutters & fittings - PVCu. Definitions, requirements and testing. BS EN 1462: 1997 - Gutter brackets. Classification, requirements & testing. BS EN 12200-1: 2000 - Plastics rainwater piping systems for above ground external use - PVCu. BS 4514: 1983 - Specification for PVCu, soil and ventilating pipes, fittings and accessories. Kite Mark licence No. 5265. BS EN ISO 9001: 1997 - Quality systems. Model for Quality Assurance in Production, Installation and Servicing. |
Fire Resistance | Materials used are self extinguishing. |
Outlet Position | Roof Area (m2) | Drainage Capacity (litres/sec) |
---|---|---|
Outlet at one end | 103 | 2.16 |
Outlet at one end with an angle within 2m of outlet | 93 | 1.94 |
Outlet in the centre | 216 | 4.55 |
From this we can see that a centre outlet almost doubles drainage so is more efficient and could mean less outlets required.
How it's usedThe Marley Classic gutter attaches to the Ultraframe conservatory eaves beam (VAAA600 / VAA600H) by the use of concealed top-hung brackets (MGBA001 / MGBC001 (formerly MGBB001)), which are designed to snap-fit into place on the eaves and suspend the Marley Classic gutter over the eaves beams Under Gutter Trim (UGTB600).
Brackets should be fitted with a maximum of 750mm centres, and no more than 200mm from each corner or union. To fit the brackets, position the body of the bracket where you would like it to be on the eaves, hook over the lower rail and pivot the arm of the bracket upwards until the top of the body snaps into place.
Note that the screw fixing points on outlets and unions are not used when the gutter system is fitted to an Ultraframe conservatory.
Fitting to a standard house fascia would require the use of either the top hung concealed Internal Fascia Bracket, or the wrap-around External Fascia Bracket, which should be fitted with a maximum of 1m centres, and no more than 150mm from each corner or union. Marley Classic gutter should be fitted level without a fall.
Outlets and unions can be fixed directly to fascia using their screw fixing points.
More detailed information is available in the Ultraframe Classic Installation Guide and the Marley Rainwater Systems Installation Guide.
For your peace of mind, we offer a no quibble 30 day Returns Policy, and a choice of Delivery & Collection options. If you have questions about these or require a little advice in choosing products, contact us through eBay messaging and we will be glad to help.
Truly PVC Limited, Unit 2, 34 Wood Street, Openshaw, Manchester M11 2FB.