2 Ton Tonne Wind Up Scissor Jack + Extendable Wheel Brace Socket Wrench Car Van
4 Size Extendable Wheel Brace-17/19/21/23MM(It is a must tool for every car owner)
This extendable Telescopic Wheel Brace is ideal as a compact solution to keep in your car in case of emergencies.
Features:
High-torque telescopic extending car wheel nut wrench easily undoes wheel nuts
High torque extending handle for easy use and extra leverage power
Strong, light and compact construction
Fitted with durable toughened non-slip rubber handle for extra grip and comfort
Made of chrome carbon steel
Supplied with 2 Double ended sockets (17/19MM) (21/23MM) Chrome Vanadium sockets
Telescopic extending handle extends from 350MM to 550MM
Package Include:
1 x Extendible Telescopic Wrench
1 x Chrome Vanadium Socket
1 x Scissor jack
1 x Handle
2T Scissor Jack Description:
The scissor jack, with tooth gears, can extend from 90mm(close position) to 360mm, more than enough to lift most vehicles.
Easy to operate using the chromed crank with speed handle.
Minimum height: about 90MM
Maximum height: approximately 360MM
Lifting: 2T
Color: Black
Material: Steel
Net weight: 2.1KG
Item Size: 35*8.5*8.5CM
Scope: Suitable for small and medium sized vehicles. Such as: cars, Buick, Santana, Vietnam and other vehicles.
WARNING
1. Study, understand and follow all instructions before operating this device.
2. Do not exceed rated capacity as designated by the height/capacity curve.(Sea below)
3. Use only on hard level surface.
4. Use for emergency tire changing only.
5. Never get beneath the vehicle when it is supported by the jack.
6. Activate the hazard warning flasher,turn off ignition, set parking brake, move automatic shift selector to park position. In case of a manual transmission, move gear selector into reverse position. In addition, the wheel diagonally opposite from the wheel being lifted shall be chocked in both directions.
7. Lift only on areas of the vehicle as specified by the vehicle manufacturer.
8. Follow tire changing procedure as per the vehicle manufacturer's owner's manual.
9. No alterations shall be made to this product.
10. Failure to heed these messages may result in personal injury and/or property damage.
HEIGHT/CAPACITY CURVE
This device is designed to sustain the following loads at these specified heights. DO NOT EXCEED the rated capacity for each position.
Before Use
1. Check before each use for abnormal conditions such as cracked welds, leaks, damaged, loose or missing parts.
2. Inspect the jack immediately if lift is believed to have been subjected to an abnormal load or shock.
3. If the jack is found to be damaged, it should be removed from service until properly repaired.
OPERATING INSTRUCTIONS
1. Insert the jack handle into the hole of the handle socket.
2. Make sure that the saddle is correctly positioned. To prevent damage to the jack, do not move the jack while the handle is intact in the socket.
3. To raise load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle clockwise.
4. To lower load, use one hand to hold the front part of the handle and use the other hand to turn at the rear and of the handle counterclockwise slowly.
CARE AND MAINTENANCE
1. When jack is not in use, lifting arm should be in full down position.
2. Always keep jack clean and keep the screw and bearings well lubricated.
3. Store the handle with care.
Item Specifics |
Brand: | Unbranded |
Manufacturer Part Number: | Does not apply |
Type: | Axle Stand |
Material: | Aluminium |
Vehicle Type: | ATV |
Set or Single Item: | Set |
Minimum Height: | 1 5/16in. |
Maximum Lift Height: | 23 3/4in. |
Unit Type: | kg |
Country/Region of Manufacture: | Unknown |
You may also like
-
2 Ton Tonne Scissor
GBP 20.89
-
Universal Car Floor
GBP 7.50
-
2Pcs Car Lifting
GBP 7.21
-
2 Ton Scissor Wind
GBP 19.99
Payment
Payments are accepted through Paypal only. It's a quick, safe and free way to pay for your online purchases.Payments are instant, so we can prepare your order for shipping as soon as you have paid.
Payment is expected within 5 days from end of auction.
Shipping
If you have not received your item after estimated delivered days, please do not hurry to open case to us. We would recheck the shipping status for you and decide refund or something in your request.
We do COMBINED SHIPMENT on any multiple purchases. We are pleased to grant a 10% shipping cost discount on purchases with more than one (1) item.
We are also happy to offer personalized discounts for larger order.
Returns
Return & Replace.
All returned products must be in their original packaging with all included accessories intact,and must be accompanied by a copy of the Return Item Authorization (RMA) issued by us,and sent to the address indicated in the Return Item Authorization.We shall notify you once we have received and processed your returned item. We typically process your returned items for evaluation & investigation within seven (7) days of receiving them.If it meets our warranty requirements,a refund will be given or a brand new replacement unit will be sent to you at our cost.
Taxes & Custom Duties.
The shipping cost does not cover any local taxes, import duties, customs clearance,or any other import-related costs levied by your government.Please check with your local customs office for more information.
Contact US
We handle large emails every day. Please allow us to reply your email within 48hrs.(Monday-Friday). Emails will not be answered weekend or holidays.
If you do not receive our reply, please kindly re-sent your email and we will reply to you as soon as possible.
|