Shieldmaster Twin Wall Components
Shieldmaster is a precision engineered, twin wall insulated flue system offering a complete range of components for every type of installation. Crafted with ease of use in mind, Shieldmaster utilises a secure push fit connection which when connected using the provided locking band (where applicable), creates a sealed joint between all parts. Shieldmaster is CE certified, tested compliant to EN1856-1:2009, BS476-20 and fully HETAS approved.
All components required to complete both internal (passing through the roof) and external (passing through an outside wall) Shieldmaster Twin Wall systems are contained within the dropdown menu. Please note, all components within this multi-listing are designed for use with Shieldmaster Twin Wall flue pipes of the internal diameter selected (5", 6", 7" or 8").
Adapters
If maintaining the same internal diameter from stove/stove pipe to Twin Wall (i.e. 5" to 5"), please only select 'Single Wall to Twin Wall Adapter'. If increasing the internal diameter from stove/stove pipe to Twin Wall (i.e. 5" to 6"), please select 'Increaser Single to Twin' (see below):
5” Selection = 4” Single to 5” Twin Wall Increasing Adapter
6” Selection = 5” Single to 6” Twin Wall Increasing Adapter
7” Selection = 6” Single to 7” Twin Wall Increasing Adapter
8” Selection = 7” Single to 8” Twin Wall Increasing Adapter
Collars, Brackets, Bands and Plates
These are designed to secure around Twin Wall flue and so will measure 2" greater than the diameter selected (as Twin Wall has a 2" greater outer diameter than inner):
5” Selection = 7" diameter
6” Selection = 8" diameter
7” Selection = 9" diameter
8” Selection = 10" diameter
Brand : Shieldmaster
Colour : Stainless Steel
Warranty : 25 years
Approvals : CE & HETAS ANC112
Designation : EN:1856-1 T450 N1 D VM L50050 G(60)
Thickness of Steel : 0.50mm
Insulation : Kaminova Stone Wool 120
Grade of Inner Wall Steel : 316
Grade of Outer Wall Steel : 304
Distance to combustibles : 60mm
Fuels : All Solid Fuels, Gas & Oil
Temperature Resistance : 450°C
Locking Band Included : Only on items with twin wall male connection
Compatible with Other Brands : Shieldmaster only
Connection : Push Fit
Unsupported Height : 1.5m
Dispatched from stock
Components designed to secure around a Twin Wall flue pipe are sold by the internal diameter of the Twin Wall flue they are suitable for. For example, 5” Twin Wall flue has a 7” outer diameter and therefore, a 5” Twin Wall Storm Collar will measure 7”. This applies to Storm Collars, Brackets/Supports, Locking Bands and Plates.
A minority of locations unfortunately incur extra carriage charges due to location of courier hubs. This can affect (but not limited to) addresses in Scotland, Northern Ireland, North West/South West England and Islands. Should your order be affected, we shall contact you the following business day. This is independent of the eBay carriage calculator.