Signal Generator Modules Adjustable 1-channel PWM Pulse Frequency Duty Cycles

Signal Generator Modules Adjustable 1-channel PWM Pulse Frequency Duty Cycles

DESCRIPTION Signal Generator Modules Adjustable 1-channel PWM Pulse Frequency Duty Cycles

Feature:

 

*Signal generator, provides electrical signals at a variety of frequencies, square wave, and output levels.It is used as a signal source or excitation source for testing.

*High definition LCD display

*1-Channel PWM output.

*Support frequency adjustment and duty cycle adjustment;

*Wide frequency range and high accuracy.

*Support Serial Communication.

*Widely used in production practice and technology.

 

Specification:

*Work voltage:DC 3.3V-30V

*Frequency range:1Hz~150KHz

*Frequency accuracy:2%

*Duty cycle range:0.00%-100%

*Output Current:About 5-30mA

*Output amplitude:Same to input voltage

*Size:approx. 79*43*27mm

*Operating temperature:-20degree Celsius~70degree Celsius

 

Frequency set range:

Enter the settings interface when short press any button 'FREQ+' or 'FREQ-' in the normal running status to select frequency range.Automatically switch frequency range.

Pay attention to the position where the decimal point moves when the button is pressed.

Display 'XXX'.No decimal point,The minimum frequency is 1Hz.The frequency range is 1Hz ~ 999Hz.

Display 'X.XX'.The decimal point is the penultimate, The minimum frequency is 0.01KHz.The frequency range is 1.00KHz ~ 9.99KHz.

Display 'XX.X'.The decimal point is the third last,The minimum frequency is 0.1KHz.The frequency range is 10.0KHz ~ 99.9KHz.

Display 'X.X.X'.The decimal point is fully lit,The minimum frequency is 1KHz.The frequency range is 1KHz ~ 150KHz.

For example:

Display '100' means PWM output frequency is 100Hz;

Display '1.01' means PWM output frequency is 1.01KHz;

Display '54.1' means PWM output frequency is 54.1KHz;

Display '1.2.4' means PWM output frequency is 124KHz;

 

Duty cycle set range:

Enter the settings interface when short press any button 'DUTY+' or 'DUTY-' in the normal running status to select duty cycle.Automatically switch frequency range.

Duty cycle range is 0.00%-100%.

 

Application:

*Square wave signal generator, generating square wave signal for experimental development;

*Used to generate a square wave signal that controls the motor driver;

*Generate adjustable pulses for use by the MCU;

*Dimmer;

*Speed governor

 

Use steps:

1.Connect to power supply;

2.Short or long press button 'FREQ+' or 'FREQ-' to set frequency;

3.Short or long press button 'DUTY+' or 'DUTY-' to set duty cycle;

4.Connect to load.

 

Package Contents:

 

1*PWM Signal Generator

 

Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness .

POLICES ShippingPaymentWARRANTY

 

We only  ship to confirmed Paypal addresses.  Please comfirm that your paypal address is in line with your shipping address.

 

Please kindly note that  the c ombined shipping  is not provided  because the shipping fee is calculated by weight. Also, the each additional item means  exactly  the the same color and size.  

 

It takes about  7 -15 working days to US; about 10-30 working days to other countries.  Transit time may be a little delayed because of the  bad  weather and customs  inspection . If you  do  not receive your  item  within 30 working days since payment finished, please contact us immediately for further assistance.

 

We accept payment via Paypal only.

Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.

 

We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions,  p lease feel free to contact us via "Ask seller a question" . We will reply your email within 24  working hours.

• Condition: New
• Brand: Unbranded
• Country/Region of Manufacture: China
• Work voltage: DC 3.3V-30V
• Frequency range: 1Hz~150KHz
• Frequency accuracy: 2%
• Duty cycle range: 0.00%-100%
• Output Current: About 5-30mA
• Output amplitude: Same to input voltage
• Size: approx. 79*43*27mm
• Operating temperature: -20degree Celsius~70degree Celsius
• Package Contents: 1*PWM Signal Generator

See More