Total Blackout Privacy Glass Window Film Block Out 100% Light Black Tint Tinting *NEW* BUBBLE FREE - Choice of Size - CHEAPEST ON EBAY!

£8.11 Buy It Now, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: Top-Rated Seller tint_fit ✉️ (37,668) 98.3%, Location: WASHINGTON, GB, Ships to: WORLDWIDE, Item: 262096654439 TOTAL BLACKOUT PRIVACY GLASS WINDOW FILM BLOCK OUT 100% LIGHT BLACK TINT TINTING. Total solid gloss blackout from both inside and out. Blackout Data Sheet. Solar absorption - 88%. Visible light reflection - 13%. Solar reflection - 11%. Note: Keep film taut and straight, do not allow film to curl up on itself or to wrinkle. Powered by Frooition All Items See our eBay store for more great items >> Shop Categories Automotive Films Standard Range Premium Range Premium Plus Range High Performance Range Reflective Films Silver Finish Blue Finish Bronze Finish Green Finish Gold Finish Red Finish Purple Finish Pink Finish Dual Reflective Films Sputtered Films Insulation Films Frosted Films Privacy Films Safety / Security Films Clear Finish Frosted Finish Silver Finish Neutral Finish Non-Reflective Coloured Films Conservatory Roof Films External Application Films Specialist Films Sign & Print Paint Protection Decorative Films Dry Erase Board Headlight Vinyl Manifestations Tools Kits Scrapers Tube Squeegees Handled Squeegees Hard Cards Cleaning / Prep & Chemicals Knives Blades Squeegee Essentials Paint Protection/Graphics etc Installation Accessories Measure / Mark & Trim Sprayers & Accessories Slitters & Accessories/Meters Samples Popular Films and Sizes

TOTAL BLACKOUT PRIVACY GLASS WINDOW FILM BLOCK OUT 100% LIGHT BLACK TINT TINTING
  • Item Description
  • Total solid gloss blackout from both inside and out.
  • Gives total privacy, you can not see in or out at all.
  • Does not allow any light at all in or out.
  • Professional quality - used by most professional tint shops.
  • Non Fade.
  • Prevents UV light for skin conditions and fading of fabrics etc.

    NEW Anti-bubble Blackout - Exactly the same as standard blackout but with new special air escape technology. This means once you have squeegeed the film out during fitting if you make a mistake any air bubbles will disappear over a period of 14 days as any air that is trapped under the film is slowly released. We recommend if you do get bubbles you try to make them as small as possible so that the time it takes them to disappear is reduced.  

    (Please note just because the standard is not bubble free this does not mean you will get bubbles, if you follow the instructions properly and do not make a mistake you will get a bubble free finish with the standard too). 

    Specification:

    U.V. transmission - 1% Visible light reflection - 13% Visible light transmission - 0% Solar energy rejected - 72% Solar reflection - 11% Solar absorption - 88% Solar transmission - 1% Glare reduction - 100%

    Warranty - 10 year

    Internal Application Pressure sensitive adhesive

      Blackout Data Sheet

    Please ensure payment is made within 3 days of buying the item or eBay will automatically open an unpaid item case.

    Also available in ...  

  • Delivery
  • Delivery
  • Installation
  • About Us
  • Returns
  • Contact Us

    Delivery All free delivery is for UK mainland only. If you require shipping outside the UK please contact us via eBay message for a quote. If you order an item that is over 100cm wide or 10m in length your delivery method will be upgraded to a 24 hour courier instead of Royal Mail 48 free of charge. Free courier is for UK mainland only and does not cover Northern Ireland, Southern Ireland, any other offshore islands and the Scottish highlands. The following UK postcodes do not qualify for the free upgraded shipping and we will require an extra postage charge to send orders over the above measurement: AB31 to AB38, AB40 to AB56, IV1 to IV28, IV30 to IV32, IV36 to IV40, IV52 to IV54, IV63, KW1 to KW14, PA21 to PA38, PH4 to PH41, PH49, PH50, ALL BT postcodes, ALL HS postcodes, IV41 to IV49, IV51, IV55, IV56, KA27, KA28, KW15 to KW17, PA20, PA41 to PA49, PA60 to PA78, PH42 to PH44, ALL ZE postcodes, ALL IM postcodes, ALL Channel Island postcodes. If you are unsure of the cost of postage for you please do not hesitate to ask. Whenever possible all orders placed before 2:30pm will be sent the same working day, this may not always be possible on extremely busy days. Orders placed after 2:30pm will be sent the next working day whenever possible. From there delivery time will depend on what service you chose at checkout.
  • Installation

    Installation With all films bought you will receive full fitting instructions on paper. IMPORTANT :- Applications are NOT RECOMMENDED in the following situations:- When outside temperatures are below freezing or in very bright direct sunlight. To rough cast glass surfaces. TOOLS REQUIRED - Washing up liquid, Spray bottle, Squeegee, Craft knife, Glass scraper, Straight edge, Tape measure, Soft lint free cloth. Please see our tools category for various tools and fitting kits. WINDOW FILM is a very thin sheet of material that requires handling with great care. Creasing & folding must be avoided. As with aluminium foil, once creased, the film will remain creased and therefore cannot be returned. Applications need to be carried out in a draught & dust free situation. PREPARATION & PRE-CLEANING are vitally important & care must be taken to flush any dirt particles out of the window frame. Some airborne dust may get under the film, but this is difficult to avoid completely & it's presence will not affect the performance of the installation. DURING DRYING OUT some haziness will be evident & this will disappear & dry out over a 2-4 week period. CLEANING as you would for normal windows but not until 2 weeks after installation & always with a soft leather or cloth and clean water, never use any abrasive cleaners or cleaners that contain amonia. 1. WINDOW PREPARATION :- 1. Make up the slip solution in spray bottle (1 tsp washing up liquid to 1 pint cold water). 2. Thoroughly wash glass with slip solution & squeegee dry. 3. Remove paint, varnish or other foreign matter with a scraper. 4. Spray glass with slip solution & squeegee out, checking that the glass surface is very clean & dust free. 2. FILM HANDLING :- Adhesive surface is protected between 'window film' and liner. Window film may be cut to approximate size with a very sharp blade or scissors. It is recommended that the film be cut at least 1/2" longer & wider than the glass. You are now ready to apply the film to the glass. Note: Separate a corner of the 'window film' and liner with 2 small pieces of adhesive tape on either side of the product. 3. FILM APPLICATION :- 1. Thoroughly wet the glass with the slip solution, this will hold the film in place whilst you remove the clear liner. 2. Place film on wet glass with liner facing you. From the ready separated corner carefully peel off the liner. Spray the adhesive surface generously with the slip solution (you cannot apply too much solution). 3. Carefully reverse film on to the glass so that the adhesive side is now in contact with the glass. Note: Keep film taut and straight, do not allow film to curl up on itself or to wrinkle. A crease or wrinkle will not flatten out on application. 4. Position the film by gently sliding on wet surface and smoothing out large air bubbles. 5. Ensure all glass area is covered by the film with slight overlap on all sides. 4. SQUEEGEE TECHNIQUE :- 1. Spray the film with the slip solution to give slip for the squeegee. 2. The first stroke should be horizontal across the top of the window. 3. The next stroke should be downwards from one edge with succeeding strokes working down and away from the first strokes. 4. On final squeegee of the top & bottom edges the squeegee may be pushed towards the edges to remove any excess water. 5. If a particle is trapped behind the film, carefully lift the film from the nearest corner & remove the particle. Before replacing the film, spray sufficient slip solution to thoroughly wet the glass & film. Replace the film & re-squeegee. 5. FILM TRIMMING :- 1. Using a straight edge (should have about 1/8" thickness), place it on end at the edge of the window. 2. Trim the film using a razor blade of craft knife so that there is a margin width of the straight edge of about 1/8". 3. Repeat for each edge of the window. 4. After trimming remove excess film. 5. Repeat entire squeegee procedure. A firm pressure is necessary to effect a strong bond. 6. You can then firmly push down all edges with a hard card or credit card wrapped in tissue. Important note to customer: Sellers and manufacturers only obligation shall be to replace such quantity of the product proved to be defective prior to fitting. Neither seller nor manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising out of the use of or the inability to use the product. Laws must be adhered to when applying to vehicles.
  • About Us

    About Us Window film and the benefits - Saves Energy - All of Tintfit's window films help reduce heat transmission through glass. Depending on the film selected, you can achieve a huge percentage of total solar energy rejection. When less solar energy comes into or is kept in your home or office building, your climate control system doesn't have to work as hard. The result: significant savings on your energy bills. Increases Comfort - With less heat from the sun coming through the glass, there is lower solar heat gain and fewer hot spots, so building occupants can enjoy a more comfortable interior environment. Reduces Glare - Glare reduction helps make an interior environment more comfortable, functional and enjoyable as it allows occupants to watch television and view computer screens with greater ease. Improves Appearance - Our window films range from virtually invisible to 100% unable to see through in a range of different colours to compliment the building or car they are being applied to. Resists Scratches - All of our films have a scratch resistant coating unlike cheap Chinese films that can also be purchased on the internet. This does not mean it will not scratch it simply means the film will resist scratches up to a certain point. Improves Safety - Although products not listed under the 'security' category are not considered 'safe and secure', once they bond to glass, they can help make that glass more shatter-resistant by holding broken splinters and shards together in the event of malicious, accidental or storm-related breakage. Reduces Fading - All Tintfit's window films help reduce fading of interior furnishings by blocking out as much as 99% of harmful and damaging ultraviolet light. The exact degree of fade reduction depends on your specific film selection, as well as the overall environment. Visible Light Transmission - A common concern about installing window film is that it may reduce too much of the visible light so making internal areas darker. This concern is often more perception than reality. The human eye works like a camera lens. It adjusts to the loss of light and therefore compensates any major changes in light levels received by the brain. Visible Light of Film 100% - Light Perceived by Human Eye 100% Visible Light of Film 80% - Light Perceived by Human Eye 87% Visible Light of Film 60% - Light Perceived by Human Eye 82% Visible Light of Film 33% - Light Perceived by Human Eye 68% Visible Light of Film 18% - Light Perceived by Human Eye 55% Visible Light of Film 14% - Light Perceived by Human Eye 49% Visible Light of Film 0% - Light Perceived by Human Eye 0%
  • Returns

    Returns All of our products come with a 14 day guarantee. Just send the item back to us in its original condition and packaging with all paperwork within 14 days of delivery and we will gladly refund your money less our postage costs to you. We do not require a return authorisation. We recommend you use an insured carrier to return the item. We will not be responsible for any return postage costs. Please send us an eBay message before returning your item. If your order is damaged in any way once you receive it i.e. creases in the film, please email or phone us straight away and do not attempt to fit the film, we will refund or replace the damaged unused goods as soon as possible. (We are unable to replace damaged goods if you have used or tried to fit them).
  • Contact Us

    Contact Us Quickest method of contact is by eBay message. Address - Tintfit Window Films Unit 26 Harvey Close Crowther Industrial Estate Washington Tyne & Wear NE38 0AB United Kingdom Helpful Links Add to Favourite Sellers Sign up to Newsletter View Feedback Contact Seller Visit seller's eBay Shop About Seller Page More Items! View more great items External Dusted Frost Vinyl Privacy Frosted Window Film Glass Matte Etch Tint £1.09 Grey Frost Privacy Frosted Window Film Matte Opal Etch Tinting Tint Glass Vinyl £1.09 Opal Frost STATIC Privacy Frosted Window Film Stippolyte Effect Matte Etch Tint £1.09 Frosted Privacy Window Film Matte White Opal Etch Tinting Tint Glass Vinyl £1.09 Powered by Frooition Frooition Frooition | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js) This listing is currently undergoing maintenance, we apologise for any inconvenience caused.
    • Condition: New
    • Width: 51cm (1' 8")
    • Length: 1m (3' 3")
    • Finish: Standard
    • Material: Window Film
    • Brand: Tintfit Window Films

  • PicClick Insights - Total Blackout Privacy Glass Window Film Block Out 100% Light Black Tint Tinting PicClick Exclusive

    •  Popularity - 552 watchers, 0.2 new watchers per day, 3,078 days for sale on eBay. Super high amount watching. 89 sold, 10 available.
    •  Best Price -
    •  Seller - 37,668+ items sold. 1.7% negative feedback. Top-Rated Plus! Top-Rated Seller, 30-day return policy, ships in 1 business day with tracking.

    People Also Loved PicClick Exclusive