AUDI CAR PAINT 2K Acrylic Paint TURBO BLUE LV5C Gloss 7.5 Lt Kit

• Trade and retail customers welcome
• Any none metallic colour to match your car, all car colours and RAL /British Standard colours are available  
• 5 Litre 2k High Gloss Paint Kit & 2.5 Litre 2k Fast Air Dry hardener
• PLEASE ENTER THE COLOUR YOU REQUIRE IN THE COMMENT BOX WHEN CHECKING OUT 

The ultimate paint fi nish, very durable and petrol resistant   

All prices include VAT 

Delivery: The standard delivery charge is included in the price of this item. P lease note there is a delivery surcharge to the following Post Codes:  DD-KY-PH-KW-IV-PA  and  TR.  Customers living in the  Channel Islands and Ireland  Please phone 0121 5586193 for a quote before you purchase.   IT IS  MPORTANT, THE CARRIERS REQUIRE A DAYTIME  CONTACT PHONE NUMBER

Important notes to remember when placing your order: (1) have the goods delivered to an address were someone is in to receive the consignment (2) ensure you leave a daytime phone number (3) the goods must be checked before you sign as carriers will not accept any claims once the goods have been signed for (4) We attach a VAT invoice to all consignments (5) Please leave feedback as soon as you have taken delivery of your consignment, this way we know that you have received your goods. Accepted Payment methods: PayPal - Credit / Debit card over the phone  Delivery within 2 working days, in most cases next day. 

 Paint mixing ratio: 2 parts paint 1 part 2k hardener and 10% 2k thinner. Recommended Application: spray only. Please note; only mix the amount you intend to use as this material has a limited pot life once the hardener has been added. 

Technical and Material Health and safety data sheets are available for this product on request or  down load from the Trade car paints web site 

Suitable for: Car - Motorcycle Caravan - Commercial Vehicle - Boats - Aircraft etc.  This is a very high gloss and durable automotive paint if applied correctly, avoiding the need for topcoat lacquer. 2k Acrylic Paint is a very hard wearing versatile material and not affected by UV rays it is also stone chip and petrol resistant, once fully cured. The drying time can be determined by the type of 2k hardener used (Fast or Slow Air Dry) We supply as standard the 2k Fast hardener & thinners, slow hardener is ideal for painting a very large areas or use in low bake ovens. This paint will not dry without the use of 2k hardener

THE PAINTERS 6 TIPS ON USING THE FOLLOWING 2K PRODUCTS:

2K ACRYLIC PAINT - 2K PRIMER - 2K CLEAR LACQUER

(1) 2K Air Dry Paint: Carry out any repairs, making sure you do not overlap the body filler over the existing paintwork. Treat any rust spots with Ferrozinc rust cure, spot primer and bare metal with self-etch primer. Mixing ratio: 1 part etch primer, 1 part etch solution or for a small area use the Pro-XL aerosol of etch primer.

(2) Flat the car with 600 grit wet/dry paper or 400 grit DA Discs, remove any dust with an air blow gun, then use a tack cloth before you wipe with  panel wipe wax and grease remover.

(3) 2K  Primer Filler: Mixing ratio: 4 parts primer 1 part 2K hardener then add 1-% - 15% 2K thinners to total volume mix, this can vary depending on the spray gun set up. STIR WELL and only mix the amount of material you intend to use in one application. Apply a cover coat and leave for 10 - 15 minutes depending on weather conditions, then apply a second coat, you may need to apply a third coat depending on your spray gun set up. When dry denib primer with a fine wet/dry paper 600 or 800 grit. Remove any dust then tack cloth the surface. Avoid leaving the primer overnight in a damp workshop if possible as primers are porous so it could absorb moisture resulting in poor top coat adhesion.

(4) Prepare the workshop for spraying the top coat. Dampen the floor and if possible earth the car. 2K Paint and clear coats build up static and will draw bits from your hair and clothes. I strongly recommend you wear painter's hooded overalls. It is a must that you use the correct protection: Face Mask, Painters overalls and gloves and only use in a well ventilated workshop. (See manufacturer’s health and safety instructions on our website)

(5) 2K Paint: STIR WELL AND CHECK COLOUR. Most colour problems are caused because the paint has not been stirred thoroughly. Mix the paint: 2 parts paint, 1 part 2K Hardener then add 10% 2K Thinner to volume, this may vary depending on spray gun setup and air supply. Apply a cover coat of 2K paint, leave for 10-15 minutes, depending on conditions. I normally touch the masking tape and when the paint is like the back of a postage stamp, not sticky just a little tacky, it is ready for the next coat or coats. 2K Paint is a direct high gloss paint if applied correctly, you should not require any 2K clear lacquer.

(6) 2K Paint and Clear Coats are direct high gloss materials and when applied correctly, you should have no need to cut and polish. If you do, I would recommend you leave overnight and then use the new AG3 Advanced liquid compound. Runs in the paint or lacquer: if you happen to get a run in the paintwork, this, in most cases can be flatted out. I have found the best way is if you use 1500 or 2000 grit wet/dry paper rub on a bar of soap and lightly flat the run. Do not try and flat out in one application, lightly flat then leave for a couple of hours or longer and do the same again taking it away in stages. This is only my basic guide, if you require more information please have a look on our website for the manufacturers Data sheets.

  IMPORTANT NOTICE REGARDING SOLVENT BASED PAINTS Please note it is against the law to use no-compliant solvent based paint and materials for refinishing / restoration of motor vehicles, unless the vehicle is classified as vintage ( over 30 years old ) or classic Exceptions: (1) None compliant vehicle paint / materials manufactured before 1 January 2007 can still be sold and purchased until stocks have depleted (2) To avoid the environmental consequences of disposing of none compliant materials Defra and the Welsh assembly granted permission ( August 2007 ) for Auto body repair / refinishing garages to use up any existing none compliant materials they have in stock. We can supply a full range of compliant materials to suite all our customers’ requirements including Water based paint. None compliant solvent based paints will still be available for customers spraying Industrial Plant and Machinery only. We have a massive colour range including: British Standard - RAL and most car - commercial and Motorcycle colours. HELP SAVE OUR ENVIRONMENT MAKE IT A BETTER PLACE TO LIVE. ALL OUR MATERIALS ARE FOR PROFESSIONAL USE. 

Delivery : The standard delivery charge is included in the price of this item. P lease note there is a delivery surcharge to the following Post Codes:  DD-KY-PH-KW-IV-PA  and  TR.  Customers living in the  Channel Islands and Ireland  Please phone 0121 5586193 for a quote before you purchase.   IT IS  MPORTANT, THE CARRIERS REQUIRE A DAYTIME  CONTACT PHONE NUMBER