TinySA ULTRA 4" 100kHz-5.3GHz Spectrum Analyzer / TinySA 100kHz-960MHz Analyzer

£138.99 Buy It Now, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: targetforward009 ✉️ (1,035) 98.5%, Location: tamworth, GB, Ships to: GB, Item: 395122022552 TinySA ULTRA 4" 100kHz-5.3GHz Spectrum Analyzer / TinySA 100kHz-960MHz Analyzer.

2023 Upgraded TinySA Ultra Spectrum Analyzer, SeeSii 4.0 Inch 100kHz to 5.3GHz Handheld Tiny Frequency Analyzer with 32Gb Card, 2-in-1 Signal Generator 100kHz to 800MHz MF/HF/VHF UHF Input,V0.4.5.1  

Product Description
  • ✅【2023 Upgraded TinySA Ultra】:This New Version V0.4.5.1 Spectrum Analyzer is developed by Hugen, with 4.0 inch 480 x 320 large touchscreen display, 100kHz to 5.3GHz widely measure range, with the new ESD protection function, the product has a higher anti-static level and a longer service life, and built-in 32Gb micro SD card, can directly record data to the card ,which is convenient for your data sharing and storage.
  • ✅【Frequency Range】:Compared to the tinysa (100kHz to 960MHz), the upgraded tinysa ULTRA has 100kHz to 5.3GHz ultra-wide measuring frequency range, spectrum analyzer for 0.1-800MHz, with Ultra mode up to 0.1MHz-6GHz.Switchable resolution band pass filters for both ranges between 200Hz to 850kHz. Color display showing 450 scan points covering up to the full low or high frequency range. Faster and more accurate measurement performance, you can easily cope with measurement testes in various fields.
  • ✅【2 in 1 Multifunctional Frequency Analyzer & Signal Generator】:When not used as Spectrum Analyzer it can be used as Signal Generator,with sine wave output between 0.1-800MHz or square wave or dual tone output up to 4.4GHz.Built-in calibration signal generator that is used for automatic self test and low input calibration.
  • ✅【PC Control】:Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer or Signal Generator.Tinysa-APP transfers data directly to the computer.The USB interface implements CDC protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel.
  • ✅【Ultra-long Battery Life】:The upgraded tinysa analyzer built-in 3000m-ah rechargeable battery,with type-C charging cable and LED charging indicator,it can be fully charged within 3 hours,no need to charge frequently.
  • ✅ 【200Hz-850kHz RBW】:The RBW is as low as 200Hz, which can effectively distinguish adjacent signals and meet the requirements of SSB dual-satellite inter-modulation test. Input Step attenuator from 0dB to 31dB (can not be used not in combination with LNA).
  • ✅【Package List】:1x Tinysa ULTRA Spectrum Analyzer; 2 x30cm ALSR100 SMA cables;1 x USB Type-C data cable;1 x SMA-SMA barrel connector ;1x TLanyard and touch plectrum;1 x Antenna with SMA connector.1 x32GB MicroSD card(plugged in the host), 1 x Touchscreen pen. It's very useful as an antenna analyzer for your ham station, easy to set without fancy calibration.
 

Upgraded 4.0Inch TinySA ULTRA Spectrum Analyzer, 100kHz to 5.3GHz Widely Measure Range,New Version V0.4.5.1

This New Version V0.4.5.1 Spectrum Analyzer with 4.0 inch 480 x 320 large touchscreen display, 100kHz to 5.3GHz widely measure range, with the new ESD protection function,and built-in 32Gb micro SD card, can directly record data to the card ,which is convenient for your data sharing and storage.

Compared with the 2.8 inch tinysa, upgraded TinySA ULTRA has a larger screen size, a wider measurement range, faster and more accurate measurement performance, you can easily cope with measurement test in various fields.

2-In-1 Multifunctional Frequency Analyzer & Signal Generator

When not used as Spectrum Analyzer it can be used as Signal Generator,with sine wave output between 0.1-800MHz or square wave or dual tone output up to 4.4GHz.

Built-in calibration signal generator that is used for automatic self test and low input calibration.

4.0 inch Large Touchscreen

With 4.0 inch 480 x 320 high definition screen, which can let you operate and see the data more clearly, give you a better using experience.

Built-in 3000m-ah Rechargeable Battery

Ultra-long battery life,with type-C charging cable and LED charging indicator,it can be fully charged within 3 hours,no need to charge frequently.

32GB TF SD card Included

Built-in 32Gb mi-cro SD card, can directly record data to the card ,which is convenient for your data sharing and storage.

 

PC Control Available

Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer or Signal Generator.Tinysa-APP transfers data directly to the computer.The USB interface implements CDC protocol and there is a large set of commands that can be invoked over the serial interface. These command can be used to perform measurements or update internal settings. The driver for Windows will install automatically after connecting to a Windows PC. The driver for Linux is built into the kernel.

      Specification:
Parameter Specification
Display size 4” TFT LCD (480×320)
Max low input frequency 800MHz, 6GHz in Ultra mode
Resolution filters in 1,3,10 steps from 200Hz to 850kHz
Max output frequency Sinus up to 800MHz, Square wave up to 4.4GHz
output level -104dBm to -16dBm
Ultra mode Level calibrated up to 5. 3GHz
Internal LNA gain 20dB up to 4GHz
Displayed points per scan max 450
0-350MHz scan time 165ms
Shortest zero span time 17ms
DANL at 100MHz -153dBm/Hz (LNA Off) / -169dBm/Hz (LNA On)
DANL degrading in ultra mode 10dB above 2.5GHz, 25dB above 5.3GHz
Phase noise at 10kHz offset -92dBc/Hz
Phase noise at 100kHz offset -110dBc/Hz
Input 1dB compression level +0.5dBm (LNA Off) / -26.5dBm (LNA On)
IIP3 without LNA +18dBm (at least 2MHz apart) / 0dBm (500Hz apart)
IIP3 with LNA -8dBm (at least 2MHz apart)
Frequency stability <1ppm ( -10℃ ~ +55℃)
SD card slot micro SD card
Audio out 3.5mm headphone plug
FW update mode activation Push jog button before switch on
Maximum current consumption 3 30mA
Maximum charging current 1300mA
Battery Li-polymer 3.7V 3000mAh
RF connectors SMA female
Communication Interface USB -CDC(Type-C),U ART-TTL( 2.54mm Connector)
Appearance Size 117x72x23mm (Excluding protruding parts)

TinySA model comparison table
  tinySA tinySA Ultra
Display size 2.8 inch 4 inch
Max low input frequency 350MHz 800MHz, 6GHz in Ultra mode
High input range 240MHz - 960MHz Not available
Resolution filters in 1,3,10 steps from 3kHz to 600kHz from 200Hz to 850kHz
Max low output frequency 350MHz Sine wave up to 800MHz, Square wave up to 4.4GHz
Low output level -76dBm to -7dBm -104dBm to -16dBm
High output frequency range 240MHz - 960MHz Not available
High output level -32dBm to 16dBm Not available
Ultra mode Not available Level calibrated up to 6GHz
Internal LNA gain Not available 20dB up to 4GHz
Internal step attenuator Normal: 0-31dB, High: NA 0-31dN
Displayed points per scan max 290 max 450
0-350MHz scan time 405ms 165ms
Shortest zero span time 1.8ms 17ms
DANL low input at 100MHz -146dBm/Hz -153dBm/Hz (LNA Off) / -169dBm/Hz (LNA On)
DANL high input at 880MHz -163dBm/Hz Not available
DANL degrading in ultra mode   10dB above 2.5GHz, 25dB above 5.3GHz
Phase noise at 10kHz offset -83dBc/Hz -92dBc/Hz
Phase noise at 100kHz offset -98dBc/Hz -108dBc/Hz
Low input 1dB compression level -0.5dBm +0.5dBm (LNA Off) / -26.5dBm (LNA On)
IIP3 without LNA +24dBm +18dBm (at least 2MHz apart) / 0dBm (500Hz apart)
IIP3 with LNA Not available -8dBm (at least 2MHz apart)
SD card slot Not available micro SD card
Audio out Not available 3.5mm headphone plug
FW update mode activation Via DFU menu Push jog button before switch on
AM modulation depth Fixed 30% 10% and 100%
FM deviation 4kHz or 75kHz 1kHz to 300kHz
Modulation frequency 50Hz to 5kHz 50Hz to 5kHz(AM) or 1kHz(FM)

Package includes:
Host (with 3000mAh battery, 4"display) x 1
USB Type-C data cable x1
30cm ALSR100 SMA cables x2
SMA-SMA barrel connector x1
Antenna with SMA connector x1
Lanyard and touch plectrum x1
32GB MicroSD card(plugged in the host) x1    

  • Condition: New
  • STYLE: TinySA ULTRA 4" 100kHz-5.3GHz
  • 2 in 1 Multifunctional: Frequency Analyzer & Signal Generator
  • Frequency Range: Sinus up to 800MHz, Square wave up to 4.4GHz
  • Spectrum Analyzer: 100kHz to 5.3GHz
  • PC Control: Tinysa-APP transfers data directly to the computer
  • Signal Generator: 100kHz to 800MHz
  • MPN: 6973692209645
  • Product Dimensions: 6.69 x 4.72 x 2.56 inches; 9.35 Ounces
  • Brand: SEESII
  • Input: MF/HF/VHF UHF
  • Storage: built-in 32Gb Card
  • Ultra-long Battery Life: built-in 3000m-ah rechargeable battery
  • Displayed Average Noise Level: -110dBc/Hz
  • with the new function: ESD protection
  • Display: 4.0 inch 480 x 320 large touchscreen

PicClick Insights - TinySA ULTRA 4" 100kHz-5.3GHz Spectrum Analyzer / TinySA 100kHz-960MHz Analyzer PicClick Exclusive

  •  Popularity - 69 watchers, 0.9 new watchers per day, 80 days for sale on eBay. Super high amount watching. 20 sold, 10 available.
  •  Best Price -
  •  Seller - 1,035+ items sold. 1.5% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive