SLUK XL5 Lambretta GP screen - Black

£170.00 Buy It Now, £6.95 Shipping, 30-Day Returns, eBay Money Back Guarantee
Seller: sluk-shop ✉️ (1,033) 98%, Location: Selston, GB, Ships to: WORLDWIDE, Item: 123307418077 SLUK XL5 Lambretta GP screen - Black. Listing Template 2018

Also available direct from ScooterLab.UK

SLUK XL5 Lambretta GP screen - Black

    The SLUK XL5 GP screen is exclusive to SLUK and will fit Lambretta GP/DL models.

     

    Like our other classic screens, the XL5 GP screen was inspired by the original café racer Biemme screen from the 1960s and of course our XL5 for the Li, although the styling and fit have been tweaked to suit the GP headset.

     

    There are no ugly brackets. Instead, the screen clamps around the headset using a special Hi-Torque* stainless steel band fastener.

     

    The original Biemme screens were made from 2mm plastic. Ours are made from 4mm acrylic-coated ABS material and come in a choice of high gloss black, white, silver or carbon effect and can be painted to match your scooter for that bespoke look.

     

    Does it do anything?

     

    It improves aerodynamics, speed and riding comfort simply by deflecting some of the wind that would normally hit you in the chest. You should expect 1 or 2 mph improvement in top speed as a result. This is cheap and effective tuning. Also the screen provides a place behind which you may hide additional instruments or a GPS unit without spoiling the look of your scooter.

     

    Assembly

     

    It's hardly an IKEA sideboard but there is a minor bit of home assembly required, the clear 'cockpit'  and laser-cut stainless trim needs attaching to the main part of the screen using the 7 stainless steel bolts and Nyloc nuts (supplied). The metal trim sits uppermost.

     

    Fitting

     

    Fitting is simple thanks to the Hi-Torque fastener which slides over the inner lip of the screen. Not only is it quick and easy to fit but it also means taking it off is simple when you need to get into the headset to change a cable or bulb.

     

     

    Wrap it

     

    Before fitting simply wrap a length of decent quality electrical tape (Gaffa tape, or 3M tape gives good adhesion and is thick enough to allow the Hi-Torque fitting to grip firmly) around your headlight rim and any painted areas that the screen touches. The tape serves to protect the paintwork and also to give the gloss screen a good surface to grip on to. Simply slide the screen over the headlight rim and tighten the clip, either using a screwdriver or socket.

     

    Adjustment

     

    The design has been trimmed for clearance to the legshields and also to avoid some hydraulic brake set-ups. However, if your scooter has an embellisher, thicker legshield rubber or hydraulic master cylinder fitted, you may just need to trim the screen slightly at home to clear it. You can trim the ABS with a Dremel or a hand file.

     

     

     

    FEATURES:

     

    • Designed and made in the UK.
    • Exclusive SLUK product
    • Simple to fit: pushes over the headlight rim and secures to the headset using the Hi-Torque clip.
    • Quick to remove: for ease of changing cables and bulbs.
    • Made from tough ABS plastic (as used for most motorcycle fairings) it can be easily trimmed, sanded or painted.
    • Produced in racy high-gloss finish (white/black/silver/carbon effect)
    • Fully packaged and ready to fit after simple assembly.
    • Shipped direct from the manufacturer.
    • Made to order but usually shipped within 5-7 days.
    • UK postage £6.95, World £18

    These items are made to order but delivery is usually within 5-7 days in the UK.

    * Hi-Torque fasteners can be tightened to 15Nm (approximately 3 times tighter than a traditional hose clip) however over-tightening risks damage to the screen. We recommend you periodically tighten the band to ensure the screen remains firmly fixed.

    * At least a single layer of electrical tape must be applied to the headset before fitting the screen if you do not want the paint to become marked during use.

About Us

SLUK Shop is the online sales outlet for ScooterLab.UK - we re a UK based online scooter magazine and develop products for ourselves and our readers.

Contact Us

If you have any questions then please do not hesitate to contact us through the eBay messaging system.

Feedback

We will always help you to have a 100% positive happy buying experience. Contact us if you are unhappy about any aspect of your purchase from us. We only want five star feedback from you so buy with confidence.

View Our Categories
  • Condition: New
  • Modified Item: No
  • Colour: Carbon effect
  • Country/Region of Manufacture: United Kingdom
  • Custom Bundle: No
  • Fitting: Simple fit
  • Material: ABS Plastic
  • Unit Quantity: 100
  • Type: Front screen
  • Non-Domestic Product: No
  • Manufacturer Part Number: XL5 Lambretta GP Sports screen
  • Placement on Vehicle: Front
  • Brand: SLUK

PicClick Insights - SLUK XL5 Lambretta GP screen - Black PicClick Exclusive

  •  Popularity - 4 watchers, 0.0 new watchers per day, 2,056 days for sale on eBay. Very high amount watching. 5 sold, 10 available.
  •  Best Price -
  •  Seller - 1,033+ items sold. 2% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive