UNC1/4 5/16 3/8 1/2 9/16 5/8 3/4 7/8 1 1.1/8 1.1/4 1.1/2 Nyloc Nut BZP. UNC1/4 5/16 3/8 1/2 9/16 5/8 3/4 7/8 1 1.1/8 1.1/4 1.1/2 Nyloc Nut BZP Unified Coarse, UNC, NE (Standard Height) 1/4", 5/16", 3/8", 1/2", 9/16", 5/8", 3/4", 7/8", 1", 1 1/8", 1 1/4", 1 1/2" Nyloc Nut, P-Type, Zinc/ Cr3 Plated, DIN 982. UNC1/4 5/16 3/8 1/2 9/16 5/8 3/4 7/8 1 1.1/8 1.1/4 1.1/2 Nyloc Nut BZP
Unified Coarse, UNC, NE (Standard Height) 1/4", 5/16", 3/8", 1/2", 9/16", 5/8", 3/4", 7/8", 1", 1 1/8", 1 1/4", 1 1/2" Nyloc Nut, P-Type, Zinc/ Cr3 Plated, DIN 982. Fixaball sells all diameters of UNC, NE Standard, Nylon Insert Nuts (P-type, regular). Nuts are almost always used opposite a mating bolt to fasten a stack of parts together. The two partners are kept together by a combination of their threads' friction, a slight stretch of the bolt, and compression of the parts. Nyloc Nuts A nyloc nut is a nut that locks, in a sense or is self-sticking and is less likely to loosen due to vibrations or stress. This is achieved through the addition of the nylon insert that has a diameter slightly smaller than the nuts’ thread. A fastener screwed into the nut cuts a thread into the plastic, therefore increasing the compression around it (tighter join). A nyloc nut is effective up to 121°C. Orders placed before 2pm are dispatched same day (Mon-Fri). Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout. Please make your 'No. of Items in Pack' and 'Diameter' and 'Quantity' of packs selection from the drop down menus. UNC, NE Standard, Nylon Insert Nuts Diameters available: Description 1/4"-20 UNC NE (STANDARD) NYLON INSERT LOCKING NUT UNC LOW CARBON ZINC CR+3 5/16"-18 UNC NE (STANDARD) NYLON INSERT LOCKING NUT UNC LOW CARBON ZINC CR+3 3/8"-16 UNC NE (STANDARD) NYLON INSERT LOCKING NUT UNC LOW CARBON ZINC CR+3 7/16"-14 UNC NE (STANDARD) NYLON INSERT LOCKING NUT UNC LOW CARBON ZINC CR+3 1/2"-13 UNC NE (STANDARD) NYLON INSERT LOCKING NUT UNC LOW CARBON ZINC CR+3 9/16"-12 UNC NE (STANDARD) NYLON INSERT LOCKING NUT UNC LOW CARBON ZINC CR+3 5/8"-11 UNC NE (STANDARD) NYLON INSERT LOCKING NUT UNC LOW CARBON ZINC CR+3 3/4"-10 UNC NE (STANDARD) NYLON INSERT LOCKING NUT UNC LOW CARBON ZINC CR+3 7/8"-9 UNC NE (STANDARD) NYLON INSERT LOCKING NUT UNC LOW CARBON ZINC CR+3 1"-8 UNC NE (STANDARD) NYLON INSERT LOCKING NUT UNC LOW CARBON ZINC CR+3 1 1/4"-7 UNC NE (STANDARD) NYLON INSERT LOCKING NUT UNC LOW CARBON ZINC CR+3 1 3/8"-6 UNC NE (STANDARD) NYLON INSERT LOCKING NUT UNC LOW CARBON ZINC CR+3 1 1/2"-6 UNC NE (STANDARD) NYLON INSERT LOCKING NUT UNC LOW CARBON ZINC CR+3 UNIFIED THREAD STANDARDS The basic American standards for fastening screw threads as agreed upon by standard bodies of U.K, Canada and the United States. Unified National Coarse (UNC)is a thread form with a 60 degree flank angle, rounded roots and flat crests. For a given diameter it has a larger thread pitch than an equivalent diameter UNF thread. The unified thread is based on inch sizes and was first standardised in 1948 unifying the Whitworth and American standard thread forms. Unified National Extra Fine (UNEF) is a Unified thread form with a very fine (small) pitch that are typically used on instruments and parts requiring a fine adjustment. Unified National Fine (UNF) is a thread form with a 60 degree flank angle, rounded roots and flat crests. For a given diameter it has a smaller thread pitch than an equivalent diameter UNC thread. Unified National (UN) thread form with a rounded root contour, applies only to external threads. The UN thread form has a flat, or optionally, a rounded root contour. Image is for illustrative purposes only.
UNC1/4 5/16 3/8 1/2 9/16 5/8 3/4 7/8 1 1.1/8 1.1/4 1.1/2 Nyloc Nut BZP
Unified Coarse, UNC, NE (Standard Height) 1/4", 5/16", 3/8", 1/2", 9/16", 5/8", 3/4", 7/8", 1", 1 1/8", 1 1/4", 1 1/2" Nyloc Nut, P-Type, Zinc/ Cr3 Plated, DIN 982.
Fixaball sells all diameters of UNC, NE Standard, Nylon Insert Nuts (P-type, regular).
Nuts are almost always uséd opposite a mating bolt to fasten a stack of parts together. The two partners are kept together by a combination of their threads' friction, a slight stretch of the bolt, and compression of the parts.
Nyloc Nuts
A nyloc nut is a nut that locks, in a sense or is self-sticking and is less likely to loosen due to vibrations or stress. This is achieved through the addition of the nylon insert that has a diameter slightly smaller than the nuts’ thread. A fastener screwed into the nut cuts a thread into the plastic, therefore increasing the compression around it (tighter join). A nyloc nut is effective up to 121°C.
Orders placed before 2pm are dispatched same day (Mon-Fri).
Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout.
Please make your 'No. of Items in Pack' and 'Diameter' and 'Quantity' of packs selection from the drop down menus.
UNC, NE Standard, Nylon Insert Nuts Diameters available:
Description
|
1/4"-20 UNC NE (STANDARD) NYLON INSERT LOCKING NUT UNC LOW CARBON ZINC CR+3
|
5/16"-18 UNC NE (STANDARD) NYLON INSERT LOCKING NUT UNC LOW CARBON ZINC CR+3
|
3/8"-16 UNC NE (STANDARD) NYLON INSERT LOCKING NUT UNC LOW CARBON ZINC CR+3
|
7/16"-14 UNC NE (STANDARD) NYLON INSERT LOCKING NUT UNC LOW CARBON ZINC CR+3
|
1/2"-13 UNC NE (STANDARD) NYLON INSERT LOCKING NUT UNC LOW CARBON ZINC CR+3
|
9/16"-12 UNC NE (STANDARD) NYLON INSERT LOCKING NUT UNC LOW CARBON ZINC CR+3
|
5/8"-11 UNC NE (STANDARD) NYLON INSERT LOCKING NUT UNC LOW CARBON ZINC CR+3
|
3/4"-10 UNC NE (STANDARD) NYLON INSERT LOCKING NUT UNC LOW CARBON ZINC CR+3
|
7/8"-9 UNC NE (STANDARD) NYLON INSERT LOCKING NUT UNC LOW CARBON ZINC CR+3
|
1"-8 UNC NE (STANDARD) NYLON INSERT LOCKING NUT UNC LOW CARBON ZINC CR+3
|
1 1/4"-7 UNC NE (STANDARD) NYLON INSERT LOCKING NUT UNC LOW CARBON ZINC CR+3
|
1 3/8"-6 UNC NE (STANDARD) NYLON INSERT LOCKING NUT UNC LOW CARBON ZINC CR+3
|
1 1/2"-6 UNC NE (STANDARD) NYLON INSERT LOCKING NUT UNC LOW CARBON ZINC CR+3
|
UNIFIED THREAD STANDARDS
The basic American standards for fastening screw threads as agreed upon by standard bodies of U.K, Canada and the United States.
Unified National Coarse (UNC)is a thread form with a 60 degree flank angle, rounded roots and flat crests. For a given diameter it has a larger thread pitch than an equivalent diameter UNF thread. The unified thread is based on inch sizes and was first standardised in 1948 unifying the Whitworth and American standard thread forms.
Unified National Extra Fine (UNEF) is a Unified thread form with a very fine (small) pitch that are typically uséd on instruments and parts requiring a fine adjustment.
Unified National Fine (UNF) is a thread form with a 60 degree flank angle, rounded roots and flat crests. For a given diameter it has a smaller thread pitch than an equivalent diameter UNC thread.
Unified National (UN) thread form with a rounded root contour, applies only to external threads. The UN thread form has a flat, or optionally, a rounded root contour.
Image is for illustrative purposes only.
×
×
×
×
×
Tell a friend
Visit store
Watch now
Postage info
Royal Mail 48 - £0.00
Royal Mail Tracked 24 - £2.50
UPS Next Day - £9.00
Royal Mail Tracked 48 - £1.75
Click the Postage tab above the listing description for more info
Additional delivery notes
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
We accept PayPal on our all our items so you can shop with confidence.
Simple choose the PayPal option when proceeding through the checkout.
Paying via Direct Deposit
Simply add the freight cost to the item cost and forward the total amount to the address to be provided following your purchase.
Additional Information
No additional information at this time
Ask seller a question
You might also like
M10 Socket Screw Button Round A2 304 Stainless Steel DIN 9427
M10 Socket Cap Allen Screw Bolt A2/304 Stainless Steel DIN 912
BSW Whitworth 3/16" Socket Cap Screw High Tensile 12.9 DIN 912
UNF 5/8" Socket Cap Screw High Tensile 12.9 Self Colour DIN912
Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© Fixaball
Postage
Click the Postage tab above the listing description for more info
Payment
Accepted Payment Methods
Returns
Returns are accepted
Items must be returned within
60 days
of the auction ending
Seller will pay for return shipping.
Additional Information:
'No Quibble' Guarantee. You do not need a reason to request a return. All returns are automatically accepted. Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange. To be eligible for a return, your item must be unuséd and in the same condition that you received it. It must also be in the original packaging and saleable. To complete your return, we require a receipt or proof of purchase. Please do not send your purchase back to the manufacturer. There are certain situations where only partial refunds are granted (if applicable). i.e. Restocking Fees. Any item not in its original condition, is damaged or missing parts for reasons not due to our error Any item that is returned more than 30 days after delivery.
eBay integration by