Wireless Pro Nintendo Switch Joy-Con Controller Gamepad Joypad Game Controller

£38.59 Buy It Now 11d 1h, 30-Day Returns, eBay Money Back Guarantee

Seller: Top-Rated Seller zularni_833 (347) 99.7%, Location: Glenfield, Ships to: GB, Item: 313083864445 HomePaymentShippingAbout usContact usStore CategoriesStore CategoriesOtherDetails Features This pair of controllers is compatible with Switch console and only supports wireless connection. It can be used as an entire controller also can be used as two independent controllers. No need to install any driver, it can be used once connected to Switch console. One-key connecting method for ease of handling. Wireless connection, lower interference and stable connecting signal. Built-in with 300mAh polymer lithium battery, it can be continuously used for around 4h after fully charged. It supports motion sensing function via built-in Gyro in each controller. It supports vibration function via built-in motor in each controller. Multiplayer games can be played by connecting more wireless controllers simultaneously to a Switch console. Ergonomic design and light weight construction make it comfortable even for long hours of continuous gaming. It can be upgraded by update software through USB cable connecting to PC. Key Brief Description HOME key: Power controller on or execute commands from Switch console. D-Pad: Up, down, left and right. It can be easily operated on eight directions; it acts as a set of function control keys when using a Left Controller as an independent controller. Function control keys: A, B, X, Y. Perfect key design, sensitive and quick for finger operation. Left stick and Right stick: Neoteric 3D stick can be operated precisely on 360° all-round. Functional keys: L1, R1, L2, R2. Trigger and shoulder keys perform quick response function. Screenshot key: Take screenshot and store; it acts “HOME” key when using a Left Controller as an independent controller. Reset key: Short press this key in reset hole to power controller off to disconnect controller from console Unlock key: Left unlock key and right unlock key. Press and hold the both unlock keys simultaneously to release Switch console. Connecting instruction 1. Connecting to a Switch console for the first time Power a Switch console on, on the main interface of the console, click (by using your finger) “Controllers” → “Change Grip/order” to come to this pairing pattern interface “Press L + R on the controller”, ignore “L + R”, then operate controller according to the following steps as below: Note: Please pair and connect each controller at this pairing pattern interface of a Switch console. A. Connecting a pair of controllers (A Left Controller plus a Right Controller) as an Entire Controller Step 1: Press “screenshot” key and hold for 4s to power a Left Controller on, four LEDs start blinking slowly then blinking quickly to enter searching status after 4s, when one (or more) of the LEDs is solid bright, it means that the controller is paired with the console successfully. Step 2: Press “HOME” key and hold for 4s to power a Right Controller on, four LEDs start blinking slowly then blinking quickly to enter searching status after 4s, when one (or more) of the LEDs is solid bright, it means that the controller is paired with the console successfully. Step 3: After the both controllers are paired with the console successfully, press “L1” key plus “R1” key simultaneously once, the corresponding LED(s) will be solid bright in each of the both controllers, it means that an Entire Controller (a Left Controller + a Right Controller) is connected to the console successfully and ready to be used. Step 4: Press “B” key to back to the main interface of the console. B. Connecting a Left Controller as an independent controller Step 1: Press “screenshot” key and hold for 4s to power a Left Controller on, four LEDs start blinking slowly then blinking quickly to enter searching status after 4s, when one (or more) of the LEDs is solid bright, it means that the controller is paired with the console successfully. Step 2: Press “SL” key plus “SR” key simultaneously once, the corresponding LED(s) will be solid bright in the Left Controller, it means that the Left Controller as an independent controller is connected to the console successfully and ready to be used. Step 3: Press “left of D-Pad” key to back to the main interface of the console. C. Connecting a Right Controller as an independent controller Step 1: Press “HOME” key and hold for 4s to power a Right Controller on, four LEDs start blinking slowly then blinking quickly to enter searching status after 4s, when one (or more) of the LEDs is solid bright, it means that the controller is paired with the console successfully; Step 2: Press “SL” key plus “SR” key simultaneously once, the corresponding LED(s) will be solid bright in the Right Controller, it means that the Right Controller as an independent controller is connected to the console successfully and ready to be used. Step 3: Press “A” key to back to the main interface of the console. 2. Connecting to a paired Switch console An Entire Controller (a Left Controller + a Right Controller): Short press “HOME” key for 1s to power an Entire Controller on, the controller will be connected to the console automatically again. An independent Left Controller: Short press “Screenshot” key for 1s to power a Left Controller on, the controller will be connected to the console automatically again. An independent Right Controller: Short press “HOME” key for 1s to power a Right Controller on, the controller will be connected to the console automatically again. 3. Connecting controller back to Switch console 1) If a controller is in sleeping mode, short press “HOME” key or “Screenshot” key to wake it up, it will be connected to the console again automatically. 2) If a Switch console is in sleeping mode, first press the power button of the console to wake the console up then short press “HOME” or “Screenshot” key of the controller to connect the controller back to the console (If a Switch console is in sleeping mode, the console can’t be woken up by directly pressing any key of the controller.). Note: This pair of controllers is neither with NFC function nor with camera function. Built-in motors are none HD motors, vibration experiences might be different in some games. Games which need camera function and HD motor vibration function can’t be played normally, such as Baby, Ball Count, Eating Contest etc. 4. LED indication instruction Four LEDs blinking quickly and circularly: This controller is searching for wireless devices to be paired. LED(s) solid bright: This controller is connecting to console normally via wireless. LED(s) blinking quickly: This controller battery voltage is lower than 3.6V; if the voltage is lower than 3.4V, the controller will be shut off automatically and can’t be powered on. Four LEDs blinking slowly: This controller is being charged via connecting to a charger, four LEDs will be off after fully charged. Specification: Operating voltage:DC 3.7V-4.2V Operating current:20-30mA Static current:10-80uA Vibrating current:80-150mA USB input voltage/current:DC 5V/500mA Available distance:≤8m Battery voltage/capacity:3.7V/300mAh Controller power-on time:Around 4h (fully charged) Charging time:Around 2h Static time:Around 25 days Net weight:A pair of controllers: 80g (102g including a charging cable and a user guide) Dimension:A single controller: 44*28*102.6mm Packing list:A pair of controllers, a charging cable and a user guide Remark: The above parameters are for references only, they are subject to the actual product. Packing includes:1 pair (Left & Right) x Gamepad1 pc x Charging cable1 pc x Manual Notice: Please don’t store this product in damp or high temperature places. Do not knock, beat, pierce or try to disintegrate this product avoid to damage it unnecessarily. Don’t discard it with garbage as this product is with a lithium battery built-in. Don’t use this product near fire or heat sources. Unauthorized or non-professional personnel are not allowed to disassemble this product, otherwise it won’t be in the scope of after-sales warranty. Shipping PolicyPayment MethodReturns PolicyShipping Policy 1)All items will be shipped to your ebay address .Please update your latest address when you check out,and please make sure to provide us with correct,precise and detailed shipping address. 2)All items will be shipped in 1-2 business days (excluding Sat,Sun & Holiday) after payment received and cleared. For the long-time holiday, we'll post the info on our store and reply you automatically via emails. 3)If you don't receive items over 30 business days,please make sure to contact us before leaving any neutral or negative feedbacks.We'll try our best to help you solve the problem.Payment MethodReturns PolicyHomePaymentShippingAbout usContact usCopyright©2018 datacaciquesWireless Pro Nintendo Switch Joy-Con Controller Gamepad Joypad Game ControllerDetails Features This pair of controllers is compatible with Switch console and only supports wireless connection. It can be used as an entire controller also can be used as two independent controllers. No need to install any driver, it can be used once connected to Switch console. One-key connecting method for ease of handling. Wireless connection, lower interference and stable connecting signal. Built-in with 300mAh polymer lithium battery, it can be continuously used for around 4h after fully charged. It supports motion sensing function via built-in Gyro in each controller. It supports vibration function via built-in motor in each controller. Multiplayer games can be played by connecting more wireless controllers simultaneously to a Switch console. Ergonomic design and light weight construction make it comfortable even for long hours of continuous gaming. It can be upgraded by update software through USB cable connecting to PC. Key Brief Description HOME key: Power controller on or execute commands from Switch console. D-Pad: Up, down, left and right. It can be easily operated on eight directions; it acts as a set of function control keys when using a Left Controller as an independent controller. Function control keys: A, B, X, Y. Perfect key design, sensitive and quick for finger operation. Left stick and Right stick: Neoteric 3D stick can be operated precisely on 360° all-round. Functional keys: L1, R1, L2, R2. Trigger and shoulder keys perform quick response function. Screenshot key: Take screenshot and store; it acts “HOME” key when using a Left Controller as an independent controller. Reset key: Short press this key in reset hole to power controller off to disconnect controller from console Unlock key: Left unlock key and right unlock key. Press and hold the both unlock keys simultaneously to release Switch console. Connecting instruction 1. Connecting to a Switch console for the first time Power a Switch console on, on the main interface of the console, click (by using your finger) “Controllers” → “Change Grip/order” to come to this pairing pattern interface “Press L + R on the controller”, ignore “L + R”, then operate controller according to the following steps as below: Note: Please pair and connect each controller at this pairing pattern interface of a Switch console. A. Connecting a pair of controllers (A Left Controller plus a Right Controller) as an Entire Controller Step 1: Press “screenshot” key and hold for 4s to power a Left Controller on, four LEDs start blinking slowly then blinking quickly to enter searching status after 4s, when one (or more) of the LEDs is solid bright, it means that the controller is paired with the console successfully. Step 2: Press “HOME” key and hold for 4s to power a Right Controller on, four LEDs start blinking slowly then blinking quickly to enter searching status after 4s, when one (or more) of the LEDs is solid bright, it means that the controller is paired with the console successfully. Step 3: After the both controllers are paired with the console successfully, press “L1” key plus “R1” key simultaneously once, the corresponding LED(s) will be solid bright in each of the both controllers, it means that an Entire Controller (a Left Controller + a Right Controller) is connected to the console successfully and ready to be used. Step 4: Press “B” key to back to the main interface of the console. B. Connecting a Left Controller as an independent controller Step 1: Press “screenshot” key and hold for 4s to power a Left Controller on, four LEDs start blinking slowly then blinking quickly to enter searching status after 4s, when one (or more) of the LEDs is solid bright, it means that the controller is paired with the console successfully. Step 2: Press “SL” key plus “SR” key simultaneously once, the corresponding LED(s) will be solid bright in the Left Controller, it means that the Left Controller as an independent controller is connected to the console successfully and ready to be used. Step 3: Press “left of D-Pad” key to back to the main interface of the console. C. Connecting a Right Controller as an independent controller Step 1: Press “HOME” key and hold for 4s to power a Right Controller on, four LEDs start blinking slowly then blinking quickly to enter searching status after 4s, when one (or more) of the LEDs is solid bright, it means that the controller is paired with the console successfully; Step 2: Press “SL” key plus “SR” key simultaneously once, the corresponding LED(s) will be solid bright in the Right Controller, it means that the Right Controller as an independent controller is connected to the console successfully and ready to be used. Step 3: Press “A” key to back to the main interface of the console. 2. Connecting to a paired Switch console An Entire Controller (a Left Controller + a Right Controller): Short press “HOME” key for 1s to power an Entire Controller on, the controller will be connected to the console automatically again. An independent Left Controller: Short press “Screenshot” key for 1s to power a Left Controller on, the controller will be connected to the console automatically again. An independent Right Controller: Short press “HOME” key for 1s to power a Right Controller on, the controller will be connected to the console automatically again. 3. Connecting controller back to Switch console 1) If a controller is in sleeping mode, short press “HOME” key or “Screenshot” key to wake it up, it will be connected to the console again automatically. 2) If a Switch console is in sleeping mode, first press the power button of the console to wake the console up then short press “HOME” or “Screenshot” key of the controller to connect the controller back to the console (If a Switch console is in sleeping mode, the console can’t be woken up by directly pressing any key of the controller.). Note: This pair of controllers is neither with NFC function nor with camera function. Built-in motors are none HD motors, vibration experiences might be different in some games. Games which need camera function and HD motor vibration function can’t be played normally, such as Baby, Ball Count, Eating Contest etc. 4. LED indication instruction Four LEDs blinking quickly and circularly: This controller is searching for wireless devices to be paired. LED(s) solid bright: This controller is connecting to console normally via wireless. LED(s) blinking quickly: This controller battery voltage is lower than 3.6V; if the voltage is lower than 3.4V, the controller will be shut off automatically and can’t be powered on. Four LEDs blinking slowly: This controller is being charged via connecting to a charger, four LEDs will be off after fully charged. Specification: Operating voltage:DC 3.7V-4.2V Operating current:20-30mA Static current:10-80uA Vibrating current:80-150mA USB input voltage/current:DC 5V/500mA Available distance:≤8m Battery voltage/capacity:3.7V/300mAh Controller power-on time:Around 4h (fully charged) Charging time:Around 2h Static time:Around 25 days Net weight:A pair of controllers: 80g (102g including a charging cable and a user guide) Dimension:A single controller: 44*28*102.6mm Packing list:A pair of controllers, a charging cable and a user guide Remark: The above parameters are for references only, they are subject to the actual product. Packing includes:1 pair (Left & Right) x Gamepad1 pc x Charging cable1 pc x Manual Notice: Please don’t store this product in damp or high temperature places. Do not knock, beat, pierce or try to disintegrate this product avoid to damage it unnecessarily. Don’t discard it with garbage as this product is with a lithium battery built-in. Don’t use this product near fire or heat sources. Unauthorized or non-professional personnel are not allowed to disassemble this product, otherwise it won’t be in the scope of after-sales warranty. Shipping PolicyPayment MethodReturns PolicyShipping Policy 1)All items will be shipped to your ebay address .Please update your latest address when you check out,and please make sure to provide us with correct,precise and detailed shipping address. 2)All items will be shipped in 1-2 business days (excluding Sat,Sun & Holiday) after payment received and cleared. For the long-time holiday, we'll post the info on our store and reply you automatically via emails. 3)If you don't receive items over 30 business days,please make sure to contact us before leaving any neutral or negative feedbacks.We'll try our best to help you solve the problem.Payment Method Import duties, value added taxes and any other charges are not included, Buyers are responsible for import duties, custom fees and taxes, if any. Please check with your country's custom office to determine the additional costs impose on the item prior to buying. We are absolutely NOT responsible for any import tax or Customs duty. Returns Policy Your satisfaction is our main concern, so we try ensure your order is perfect in every way. However, things can occasionally go wrong and you wish return any item bought from us within 30 days of receipt for a refund or have the item exchanged. This can be for any of the following reasons - You need to exchange for a different item. You simply don't like your item. The wrong item was sent. The order was faulty or damaged. In the result of you wanting to return an item, you have 30 days to do so, in your return please include reason and action you would like to be taken. The buyer is responsible for the return postage, and if an exchange is required then extra postage cost will need to be paid. In the rare case of a faulty item or wrong item received then please get in contact with our customer service team and we will get the problem resolved as quickly as we can.On 15-May-20 at 14:12:21 BST, seller added the following information: Condition: New, Brand: Unbranded, Type: Gamepad, Compatible Model: For Nintendo Switch, Connectivity: Wireless, Colour: Red+Blue, Material: ABS, MPN: 1112760185-1, Platform: Nintendo Switch, Item Weight: A pair of controllers: 80g, UPC: Does not apply, EAN: Does not apply, Product Type: videogamesaccessories, Battery Capacity: 300MAH * 2, Working Voltage: DC 3.7-4.2V, Wireless Technology: Bluetooth, Charging Time: Around 2h, Input Voltage: DC5.0V, Manufacturer: TROPRO

PicClick Insights PicClick Exclusive
  •  Popularity - 2,739 views, 137.0 views per day, 20 days on eBay. Super high amount of views. 152 sold, 0 available.
  •  Price -
  •  Seller - 347+ items sold. 0.3% negative feedback. Top-Rated Seller! Ships on time with tracking, 0 problems with past sales.
Similar Items