Megger Mft1553 Multifunction Tester - Loop Rcd Ins Cont - Fully Calibrated C/W CARRY CASE, TEST LEADS, MAINS LEAD, STRAP & CERT.

Megger MFT1553 with Bluetooth Communications [080308/1927]

The MFT1553 has all the essential features necessary for testing Domestic, Commercial and Industrial fixed wiring in accordance with BS7671 (17th Edition wiring regulations) and European Standard EN61557.

• BlueTooth communication enables direct wireless transfer of the test readings from the tester to a storage device. Certificates can be completed on site when used with PowerSuite On-site software installed on a mobile device, such as a smart-phone or a PDA. Alternatively the data can be down loaded into mobile download manager for storage and later processing.

• Patented Megger Digital/Analogue Arc backlit display provides both digital readout and indication of fluctuating readings

• Fast 200mA continuity test commences the moment the test probes touch the circuit with fast response buzzer enabling time saving, hands free testing

• Non-tripping loop impedance test (15mA) provides a 3-wire non-tripping 0.01Ω loop test designed to prevent RCD tripping

• High current loop impedance test (25A) provides a fast loop test where no RCD is fitted, or for Ze measurement on the incoming side of an RCD

• Prospective fault current ranges (15mA and 25A test)

• Automatic RCD test:Selecting the Auto RCD feature starts the RCD test current cycle of Ix0.5, Ix1 and Ix5. Resetting the tripped RCD automatically continues the test sequence. Test results can be recalled on the MFT1553 once completed

• DC sensitive RCD test

• RCD Ramp test displays the actual trip current on all RCD ranges. Ideal for identifying nuisance tripping RCDs

• AC/DC Voltmeter independent of any other test functions, eliminating the need to carry a separate multimeter

• Supply voltage and polarity indication upon connection to the mains to show correct wiring of the socket under test or test lead connections.

• lluminated switch probe for single-handed operation and test status indication. Includes remote test button, bright white LED torch (1500mcd), red/green status LEDs and interchangeable probe tips

• Visible and audible safety warnings. If live voltages exist on a circuit during insulation or continuity testing the voltage is displayed on the screen. If this voltage exceeds a safe level, the tester inhibits further testing and a warning beeper sounds for extra safety

• 10mA to 1000mA RCD test ranges with both 0° and 180° phase angle

• Auto Discharge: Safely discharges system after insulation test preventing accidental shock from a stored charge on a long cable during or after disconnection

• Shuttered test lead sockets permit only the correct test lead combinations to be connected for safe testing

• Rubber over-moulded case and lid provides a secure comfortable hold, whilst providing maximum protection with IP54 weather proof rating 

Other than the usual wear and tear this unit is fully tested and works perfectly on all functions

Supplied With:

•Megger carry case

•Megger Mains lead

•3 wire FUSED test leads c/w croc clips & probes

•Full 12 month cal cert in winning bidders name