Universal Canopy Drape Holder, Rod, Pole, Bar Fits Baby Cot, Bed, Crib, Basket

Canopy Holder / Drape Support
Variation of Canopy Rods Below

Universal Cot Clamp Holder
The canopy frame consists of two joined pipes.
Two holders are screwed to the pipes and they can be moved freely as well as adjusted to the thickness of components on which the canopy frame is mounted.
The upper pipe is fixed to oval-shaped wire overwhich the canopy is placed.
Height when assembled 150cm Oval part 90cm around or 35cm across. (approx)
Fits to most standard cot/cotbed with frame not thicker the 4cm (1.5 inches)

Free Standing Holder
The canopy frame consists of two joined pipes.
The upper pipe is fixed to oval-shaped wire over which the canopy is placed, whereas the lower pipe with a circular base.
Height when assembled 150cm Oval part 90cm around or 35cm across. (approx)

Moses Basket Holder
The canopy frame consists of two joined wires which are profiled appropriately.
The upper pipe is fixed to oval-shaped wire over which the canopy is placed, whereas lower arms of the canopy frame are to be fixed in suitable part of the moses basket

Crib Canopy Holder
The canopy frame consists of two joined wires which are profiled appropriately.
The upper pipe is fixed to oval-shaped wire over which the canopy is placed, whereas lower arms of the canopy frame are to be fixed in suitable part of the cradle.
There is needed two holes in the cradle to place this canopy frame

Most Cribs Drape Holder
The canopy frame consists of two pipes which are profiled appropriately.
"Y" shape joint is fixed to oval-shaped wire over which the canopy is placed,
whereas lower arms of the canopy frame are to be fixed on the crib headboard bolts.
Holder is attached through the bolts of crib headboard.

Sizes are approximate .